From: Thomas Petazzoni Date: Sun, 3 Dec 2017 21:48:05 +0000 (+0100) Subject: arm-trusted-firmware: add BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33 X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=3f64b08ff0fa601b61b93a7c9f0553d34196dcfd;p=buildroot.git arm-trusted-firmware: add BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33 ATF can be used in different ways: - ATF encapsulates U-Boot as the BL33, which is what is done on ARM Juno (currently supported in Buildroot) and Marvell platforms (soon to be supported) - U-Boot encapsulates ATF's BL31, which is what is done on Allwinner ARM64 platforms. Until now we were assumming the former was always the case, but obviously it isn't. Therefore, this patch adds an option that allows to explicitly tell ATF that it encapsulates U-Boot as its BL33. We adapt the only defconfig that uses ATF so that it enables this option as appropriate. Signed-off-by: Thomas Petazzoni Signed-off-by: Peter Korsgaard --- diff --git a/boot/arm-trusted-firmware/Config.in b/boot/arm-trusted-firmware/Config.in index 05600461a5..b8b926982e 100644 --- a/boot/arm-trusted-firmware/Config.in +++ b/boot/arm-trusted-firmware/Config.in @@ -64,6 +64,15 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP platforms were ATF encapsulates the second stage bootloader (such as U-Boot). +config BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33 + bool "Use U-Boot as BL33" + depends on BR2_TARGET_UBOOT + help + This option allows to embed u-boot.bin as the BL33 part of + the ARM Trusted Firmware. It ensures that the u-boot package + gets built before ATF, and that the appropriate BL33 + variable pointing to u-boot.bin is passed when building ATF. + config BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES string "Additional ATF build variables" help diff --git a/boot/arm-trusted-firmware/arm-trusted-firmware.mk b/boot/arm-trusted-firmware/arm-trusted-firmware.mk index bdffb1dbe4..3731829d5d 100644 --- a/boot/arm-trusted-firmware/arm-trusted-firmware.mk +++ b/boot/arm-trusted-firmware/arm-trusted-firmware.mk @@ -8,8 +8,6 @@ ARM_TRUSTED_FIRMWARE_VERSION = $(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_V ARM_TRUSTED_FIRMWARE_LICENSE = BSD-3-Clause ARM_TRUSTED_FIRMWARE_LICENSE_FILES = license.rst -ARM_TRUSTED_FIRMWARE_DEPENDENCIES += uboot - ifeq ($(ARM_TRUSTED_FIRMWARE_VERSION),custom) # Handle custom ATF tarballs as specified by the configuration ARM_TRUSTED_FIRMWARE_TARBALL = $(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION)) @@ -30,10 +28,14 @@ ARM_TRUSTED_FIRMWARE_PLATFORM = $(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_ ARM_TRUSTED_FIRMWARE_MAKE_OPTS += \ CROSS_COMPILE="$(TARGET_CROSS)" \ - BL33=$(BINARIES_DIR)/u-boot.bin \ $(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES)) \ PLAT=$(ARM_TRUSTED_FIRMWARE_PLATFORM) +ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33),y) +ARM_TRUSTED_FIRMWARE_MAKE_OPTS += BL33=$(BINARIES_DIR)/u-boot.bin +ARM_TRUSTED_FIRMWARE_DEPENDENCIES += uboot +endif + ifeq ($(BR2_TARGET_VEXPRESS_FIRMWARE),y) ARM_TRUSTED_FIRMWARE_MAKE_OPTS += SCP_BL2=$(BINARIES_DIR)/scp-fw.bin ARM_TRUSTED_FIRMWARE_DEPENDENCIES += vexpress-firmware diff --git a/configs/arm_juno_defconfig b/configs/arm_juno_defconfig index 1fb5587488..54506d8061 100644 --- a/configs/arm_juno_defconfig +++ b/configs/arm_juno_defconfig @@ -15,6 +15,7 @@ BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v1.2" BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="juno" BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33=y BR2_TARGET_UBOOT=y BR2_TARGET_UBOOT_BOARDNAME="vexpress_aemv8a_juno" BR2_TARGET_UBOOT_CUSTOM_VERSION=y