From: Frank Ch. Eigler Date: Mon, 18 May 1998 15:55:05 +0000 (+0000) Subject: * Monster patch - may destablize MIPS sims for a little while. X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=3fa454e95fe104add1b25e53a8dc1decc1c270f1;p=binutils-gdb.git * Monster patch - may destablize MIPS sims for a little while. * Followup patch for SCEI PR 15853 * First check-in of TX3904 interrupt controller devices for ECC. [sanitized] * First implementation of MIPS hardware interrupt emulation. Mon May 18 18:22:42 1998 Frank Ch. Eigler * configure.in (SIM_AC_OPTION_HARDWARE): Added common hardware modules. Recognize TX39 target with "mips*tx39" pattern. * configure: Rebuilt. * sim-main.h (*): Added many macros defining bits in TX39 control registers. (SignalInterrupt): Send actual PC instead of NULL. (SignalNMIReset): New exception type. * interp.c (board): New variable for future use to identify a particular board being simulated. (mips_option_handler,mips_options): Added "--board" option. (interrupt_event): Send actual PC. (sim_open): Make memory layout conditional on board setting. (signal_exception): Initial implementation of hardware interrupt handling. Accept another break instruction variant for simulator exit. (decode_coproc): Implement RFE instruction for TX39. (mips.igen): Decode RFE instruction as such. start-sanitize-tx3904 * configure.in (tx3904cpu,tx3904irc): Added devices for tx3904. * interp.c: Define "jmr3904" and "jmr3904debug" board types and bbegin to implement memory map. * dv-tx3904cpu.c: New file. * dv-tx3904irc.c: New file. end-sanitize-tx3904 --- diff --git a/sim/mips/.Sanitize b/sim/mips/.Sanitize index 46f01beb0ae..135288da32c 100644 --- a/sim/mips/.Sanitize +++ b/sim/mips/.Sanitize @@ -31,6 +31,13 @@ else lose_these_too="${vr4320_files} ${lose_these_too}" fi +tx3904_files="dv-tx3904cpu.c dv-tx3904irc.c" +if ( echo $* | grep keep\-tx3904 > /dev/null ) ; then + keep_these_too="${tx3904_files} ${keep_these_too}" +else + lose_these_too="${tx3904_files} ${lose_these_too}" +fi + sky_files="ChangeLog.sky sky-device.c sky-device.h sky-dma.c sky-dma.h sky-bits.h" sky_files="$sky_files sky-engine.c sky-gpuif.c sky-gpuif.h" sky_files="$sky_files sky-gs.c sky-gs.h" @@ -264,6 +271,36 @@ else fi +tx3904_files="ChangeLog configure configure.in interp.c" + +if ( echo $* | grep keep\-tx3904 > /dev/null ) ; then + for i in $tx3904_files ; do + if test ! -d $i && (grep sanitize-tx3904 $i > /dev/null) ; then + if [ -n "${verbose}" ] ; then + echo Keeping tx3904 stuff in $i + fi + fi + done +else + for i in * ; do + if test ! -d $i && (grep sanitize-tx3904 $i > /dev/null) ; then + if [ -n "${verbose}" ] ; then + echo Removing traces of \"tx3904\" from $i... + fi + cp $i new + sed '/start\-sanitize\-tx3904/,/end-\sanitize\-tx3904/d' < $i > new + if [ -n "${safe}" -a ! -f .Recover/$i ] ; then + if [ -n "${verbose}" ] ; then + echo Caching $i in .Recover... + fi + mv $i .Recover + fi + mv new $i + fi + done +fi + + never_files="ChangeLog configure configure.in interp.c gencode.c mips.igen mips.dc" diff --git a/sim/mips/ChangeLog b/sim/mips/ChangeLog index 07d4c76693d..7900ebabb6d 100644 --- a/sim/mips/ChangeLog +++ b/sim/mips/ChangeLog @@ -1,3 +1,34 @@ +Mon May 18 18:22:42 1998 Frank Ch. Eigler + + * configure.in (SIM_AC_OPTION_HARDWARE): Added common hardware + modules. Recognize TX39 target with "mips*tx39" pattern. + * configure: Rebuilt. + * sim-main.h (*): Added many macros defining bits in + TX39 control registers. + (SignalInterrupt): Send actual PC instead of NULL. + (SignalNMIReset): New exception type. + * interp.c (board): New variable for future use to identify + a particular board being simulated. + (mips_option_handler,mips_options): Added "--board" option. + (interrupt_event): Send actual PC. + (sim_open): Make memory layout conditional on board setting. + (signal_exception): Initial implementation of hardware interrupt + handling. Accept another break instruction variant for simulator + exit. + (decode_coproc): Implement RFE instruction for TX39. + (mips.igen): Decode RFE instruction as such. +start-sanitize-tx3904 + * configure.in (tx3904cpu,tx3904irc): Added devices for tx3904. + * interp.c: Define "jmr3904" and "jmr3904debug" board types and + bbegin to implement memory map. + * dv-tx3904cpu.c: New file. + * dv-tx3904irc.c: New file. +end-sanitize-tx3904 + +Wed May 13 14:40:11 1998 Gavin Koch + + * mips.igen (check_mt_hilo): Create a separate r3900 version. + Wed May 13 14:27:53 1998 Gavin Koch * r5900.igen: Replace the calls and the definition of the diff --git a/sim/mips/configure b/sim/mips/configure index fea79a28530..8e160d35580 100755 --- a/sim/mips/configure +++ b/sim/mips/configure @@ -119,6 +119,18 @@ sim_inline="-DDEFAULT_INLINE=0" +# Check to see if we're running under Cygwin32, without using +# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes". +# Otherwise set it to "no". + + + +# Check to see if we're running under Win32, without using +# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe". +# Otherwise set it to "". + + + # Guess values for system-dependent variables and create Makefiles. # Generated automatically using autoconf version 2.12.1 @@ -167,6 +179,10 @@ ac_help="$ac_help --enable-sim-smp=n Specify number of processors to configure for (default ${default_sim_smp})." ac_help="$ac_help --enable-sim-igen=opts Enable IGEN simulator" +ac_help="$ac_help + --enable-sim-hardware=LIST Specify the hardware to be included in the build." +ac_help="$ac_help + --enable-sim-hardware=LIST Specify the hardware to be included in the build." ac_help="$ac_help --with-x use the X Window System" ac_help="$ac_help @@ -683,7 +699,7 @@ fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:687: checking how to run the C preprocessor" >&5 +echo "configure:703: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -698,13 +714,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:708: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:724: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : @@ -715,13 +731,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:725: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:741: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : @@ -744,7 +760,7 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:748: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:764: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -771,7 +787,7 @@ else fi echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:775: checking for POSIXized ISC" >&5 +echo "configure:791: checking for POSIXized ISC" >&5 if test -d /etc/conf/kconfig.d && grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 then @@ -792,12 +808,12 @@ else fi echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:796: checking for ANSI C header files" >&5 +echo "configure:812: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -805,7 +821,7 @@ else #include EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:809: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:825: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* @@ -822,7 +838,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -840,7 +856,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -861,7 +877,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -872,7 +888,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:876: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:892: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null then : else @@ -896,12 +912,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:900: checking for working const" >&5 +echo "configure:916: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:970: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -971,21 +987,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:975: checking for inline" >&5 +echo "configure:991: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1005: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1011,12 +1027,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1015: checking for off_t" >&5 +echo "configure:1031: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -1044,12 +1060,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1048: checking for size_t" >&5 +echo "configure:1064: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -1079,19 +1095,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:1083: checking for working alloca.h" >&5 +echo "configure:1099: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:1095: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1111: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -1112,12 +1128,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:1116: checking for alloca" >&5 +echo "configure:1132: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1160: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -1172,12 +1188,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:1176: checking whether alloca needs Cray hooks" >&5 +echo "configure:1192: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1206: checking for $ac_func" >&5 +echo "configure:1222: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1250: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1257,7 +1273,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:1261: checking stack direction for C alloca" >&5 +echo "configure:1277: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1265,7 +1281,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1304: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -1309,17 +1325,17 @@ for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1313: checking for $ac_hdr" >&5 +echo "configure:1329: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1323: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1339: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* @@ -1348,12 +1364,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1352: checking for $ac_func" >&5 +echo "configure:1368: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1396: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1401,7 +1417,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:1405: checking for working mmap" >&5 +echo "configure:1421: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1409,7 +1425,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1569: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -1622,7 +1638,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:1626: checking host system type" >&5 +echo "configure:1642: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1643,7 +1659,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:1647: checking target system type" >&5 +echo "configure:1663: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -1661,7 +1677,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1665: checking build system type" >&5 +echo "configure:1681: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1705,7 +1721,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1709: checking for $ac_word" >&5 +echo "configure:1725: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1734,7 +1750,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1738: checking for $ac_word" >&5 +echo "configure:1754: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1782,7 +1798,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1786: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1802: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1792,11 +1808,11 @@ ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1816: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1816,12 +1832,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1820: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1836: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1825: checking whether we are using GNU C" >&5 +echo "configure:1841: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1830,7 +1846,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1834: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1850: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1845,7 +1861,7 @@ if test $ac_cv_prog_gcc = yes; then ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1849: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1865: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1884,7 +1900,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1888: checking for a BSD compatible install" >&5 +echo "configure:1904: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1950,7 +1966,7 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1954: checking for $ac_word" >&5 +echo "configure:1970: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1984,17 +2000,17 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1988: checking for $ac_hdr" >&5 +echo "configure:2004: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1998: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2014: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* @@ -2024,12 +2040,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2028: checking for $ac_func" >&5 +echo "configure:2044: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2072: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2081,12 +2097,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2085: checking for $ac_func" >&5 +echo "configure:2101: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2129: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2143,19 +2159,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2147: checking for LC_MESSAGES" >&5 +echo "configure:2163: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2159: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2175: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2176,7 +2192,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2180: checking whether NLS is requested" >&5 +echo "configure:2196: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2196,7 +2212,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2200: checking whether included gettext is requested" >&5 +echo "configure:2216: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2215,17 +2231,17 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2219: checking for libintl.h" >&5 +echo "configure:2235: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2229: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2245: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* @@ -2242,19 +2258,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2246: checking for gettext in libc" >&5 +echo "configure:2262: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2258: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2274: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2270,7 +2286,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2274: checking for bindtextdomain in -lintl" >&5 +echo "configure:2290: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2278,7 +2294,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2309: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2305,19 +2321,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2309: checking for gettext in libintl" >&5 +echo "configure:2325: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2337: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2345,7 +2361,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2349: checking for $ac_word" >&5 +echo "configure:2365: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2379,12 +2395,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2383: checking for $ac_func" >&5 +echo "configure:2399: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2427: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2434,7 +2450,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2438: checking for $ac_word" >&5 +echo "configure:2454: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2469,7 +2485,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2473: checking for $ac_word" >&5 +echo "configure:2489: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2501,7 +2517,7 @@ else fi cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2529: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -2541,7 +2557,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2545: checking for $ac_word" >&5 +echo "configure:2561: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2575,7 +2591,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2579: checking for $ac_word" >&5 +echo "configure:2595: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2610,7 +2626,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2614: checking for $ac_word" >&5 +echo "configure:2630: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2700,7 +2716,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:2704: checking for catalogs to be installed" >&5 +echo "configure:2720: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -2728,17 +2744,17 @@ echo "configure:2704: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:2732: checking for linux/version.h" >&5 +echo "configure:2748: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2742: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2758: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* @@ -2807,17 +2823,17 @@ for ac_hdr in stdlib.h string.h strings.h unistd.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2811: checking for $ac_hdr" >&5 +echo "configure:2827: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2821: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2837: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* @@ -2847,17 +2863,17 @@ for ac_hdr in sys/time.h sys/resource.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2851: checking for $ac_hdr" >&5 +echo "configure:2867: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2861: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2877: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* @@ -2887,17 +2903,17 @@ for ac_hdr in fcntl.h fpu_control.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2891: checking for $ac_hdr" >&5 +echo "configure:2907: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2901: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2917: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* @@ -2926,12 +2942,12 @@ done for ac_func in getrusage time sigaction __setfpucw do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2930: checking for $ac_func" >&5 +echo "configure:2946: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2974: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3127,12 +3143,12 @@ fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:3131: checking return type of signal handlers" >&5 +echo "configure:3147: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -3149,7 +3165,7 @@ int main() { int i; ; return 0; } EOF -if { (eval echo configure:3153: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3169: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else @@ -3168,6 +3184,30 @@ EOF +echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 +echo "configure:3189: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$CYGWIN32" = yes; then +am_cv_exeext=.exe +else +cat > am_c_test.c << 'EOF' +int main() { +/* Nothing needed here */ +} +EOF +${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 +am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` +rm -f am_c_test* +fi + +test x"${am_cv_exeext}" = x && am_cv_exeext=no +fi +EXEEXT="" +test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} +echo "$ac_t""${am_cv_exeext}" 1>&6 + sim_link_files= sim_link_links= @@ -3298,14 +3338,14 @@ else if test "x$cross_compiling" = "xno"; then echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 -echo "configure:3302: checking whether byte ordering is bigendian" >&5 +echo "configure:3342: checking whether byte ordering is bigendian" >&5 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_bigendian=unknown # See if sys/param.h defines the BYTE_ORDER macro. cat > conftest.$ac_ext < #include @@ -3316,11 +3356,11 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:3320: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3360: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* # It does; now see whether it defined to BIG_ENDIAN or not. cat > conftest.$ac_ext < #include @@ -3331,7 +3371,7 @@ int main() { #endif ; return 0; } EOF -if { (eval echo configure:3335: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:3375: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_bigendian=yes else @@ -3351,7 +3391,7 @@ if test "$cross_compiling" = yes; then { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3408: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null then ac_cv_c_bigendian=no else @@ -3414,7 +3454,6 @@ else fi - # Ensure a reasonable default simulator is constructed: (DEPRECATED) case "${target}" in # start-sanitize-tx19 @@ -3435,10 +3474,16 @@ esac # DEPRECATED +# +# Instead of defining a `subtarget' macro, code should be checking +# the value of {STATE,CPU}_ARCHITECTURE to identify the architecture +# in question. +# case "${target}" in # start-sanitize-tx19 mipstx19*-*-*) SIM_SUBTARGET="-DSUBTARGET_R3900=1";; # end-sanitize-tx19 + mips*tx39*) SIM_SUBTARGET="-DSUBTARGET_R3900=1";; *) SIM_SUBTARGET="";; esac @@ -3599,7 +3644,7 @@ case "${target}" in # start-sanitize-tx19 mipstx19*-*-*) mips_fpu=SOFT_FLOATING_POINT ;; # end-sanitize-tx19 - mipstx39*-*-*) mips_fpu=HARD_FLOATING_POINT + mips*tx39*) mips_fpu=HARD_FLOATING_POINT mips_fpu_bitsize=32 ;; # start-sanitize-r5900 @@ -3691,7 +3736,7 @@ case "${target}" in sim_m16_filter="16" ;; # end-sanitize-tx19 - mipstx39*-*-*) sim_default_gen=IGEN + mipst*tx39*) sim_default_gen=IGEN sim_use_gen=IGEN sim_igen_filter="32,f" sim_igen_machine="-M r3900" @@ -3790,12 +3835,94 @@ esac + +# Add simulated hardware devices +# + +sim_hardware="-DWITH_HW=1" +sim_hw_obj="hw-device.o hw-ports.o hw-properties.o hw-base.o hw-tree.o sim-hw.o" +hardware="core pal glue " +# Check whether --enable-sim-hardware or --disable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then + enableval="$enable_sim_hardware" + +case "${enableval}" in + yes) ;; + no) hardware=""; sim_hardware="-DWITH_HW=0"; sim_hw_obj="";; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac +sim_hw="" +for i in x $hardware ; do + case " $f " in + x) ;; + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ;; + esac +done +sim_hw_obj="$sim_hw_obj `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" +if test x"$silent" != x"yes" && test x"$hardware" != x""; then + echo "Setting hardware to $sim_hardware, $sim_hw, $sim_hw_obj" +fi +else + +sim_hw="$hardware" +sim_hw_obj="$sim_hw_obj `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" +if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hardware, $sim_hw, $sim_hw_obj" +fi +fi + +case "${target}" in +# start-sanitize-tx3904 + mips*tx39*) +sim_hardware="-DWITH_HW=1" +sim_hw_obj="hw-device.o hw-ports.o hw-properties.o hw-base.o hw-tree.o sim-hw.o" +hardware="core pal glue tx3904cpu tx3904irc" +# Check whether --enable-sim-hardware or --disable-sim-hardware was given. +if test "${enable_sim_hardware+set}" = set; then + enableval="$enable_sim_hardware" + +case "${enableval}" in + yes) ;; + no) hardware=""; sim_hardware="-DWITH_HW=0"; sim_hw_obj="";; + ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";; + *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";; + *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';; +esac +sim_hw="" +for i in x $hardware ; do + case " $f " in + x) ;; + *" $i "*) ;; + *) sim_hw="$sim_hw $i" ;; + esac +done +sim_hw_obj="$sim_hw_obj `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" +if test x"$silent" != x"yes" && test x"$hardware" != x""; then + echo "Setting hardware to $sim_hardware, $sim_hw, $sim_hw_obj" +fi +else + +sim_hw="$hardware" +sim_hw_obj="$sim_hw_obj `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`" +if test x"$silent" != x"yes"; then + echo "Setting hardware to $sim_hardware, $sim_hw, $sim_hw_obj" +fi +fi + ;; +# end-sanitize-tx3904 + *) ;; +esac + + # If we find X, set shell vars x_includes and x_libraries to the # paths, otherwise set no_x=yes. # Uses ac_ vars as temps to allow command line to override cache and checks. # --without-x overrides everything else, but does not touch the cache. echo $ac_n "checking for X""... $ac_c" 1>&6 -echo "configure:3799: checking for X" >&5 +echo "configure:3926: checking for X" >&5 # Check whether --with-x or --without-x was given. if test "${with_x+set}" = set; then @@ -3857,12 +3984,12 @@ if test "$ac_x_includes" = NO; then # First, try using that file with no special directory specified. cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3866: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3993: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* @@ -3931,14 +4058,14 @@ if test "$ac_x_libraries" = NO; then ac_save_LIBS="$LIBS" LIBS="-l$x_direct_test_library $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:4069: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* LIBS="$ac_save_LIBS" # We can link X programs with no special library path. @@ -4057,17 +4184,17 @@ for ac_hdr in string.h strings.h stdlib.h stdlib.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:4061: checking for $ac_hdr" >&5 +echo "configure:4188: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:4071: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:4198: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* @@ -4094,7 +4221,7 @@ fi done echo $ac_n "checking for fabs in -lm""... $ac_c" 1>&6 -echo "configure:4098: checking for fabs in -lm" >&5 +echo "configure:4225: checking for fabs in -lm" >&5 ac_lib_var=`echo m'_'fabs | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -4102,7 +4229,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lm $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:4244: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -4143,12 +4270,12 @@ fi for ac_func in aint anint sqrt do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:4147: checking for $ac_func" >&5 +echo "configure:4274: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:4302: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -4402,6 +4529,7 @@ s%@sim_debug@%$sim_debug%g s%@sim_stdio@%$sim_stdio%g s%@sim_trace@%$sim_trace%g s%@sim_profile@%$sim_profile%g +s%@EXEEXT@%$EXEEXT%g s%@SIMCONF@%$SIMCONF%g s%@SIM_SUBTARGET@%$SIM_SUBTARGET%g s%@sim_igen_flags@%$sim_igen_flags%g diff --git a/sim/mips/configure.in b/sim/mips/configure.in index aba2f2e21b9..f5148e5687a 100644 --- a/sim/mips/configure.in +++ b/sim/mips/configure.in @@ -11,7 +11,6 @@ SIM_AC_OPTION_ALIGNMENT(NONSTRICT_ALIGNMENT) SIM_AC_OPTION_HOSTENDIAN SIM_AC_OPTION_WARNINGS - # Ensure a reasonable default simulator is constructed: (DEPRECATED) case "${target}" in # start-sanitize-tx19 @@ -41,7 +40,7 @@ case "${target}" in # start-sanitize-tx19 mipstx19*-*-*) SIM_SUBTARGET="-DSUBTARGET_R3900=1";; # end-sanitize-tx19 - mipstx39*-*-*) SIM_SUBTARGET="-DSUBTARGET_R3900=1";; + mips*tx39*) SIM_SUBTARGET="-DSUBTARGET_R3900=1";; *) SIM_SUBTARGET="";; esac AC_SUBST(SIM_SUBTARGET) @@ -98,7 +97,7 @@ case "${target}" in # start-sanitize-tx19 mipstx19*-*-*) mips_fpu=SOFT_FLOATING_POINT ;; # end-sanitize-tx19 - mipstx39*-*-*) mips_fpu=HARD_FLOATING_POINT + mips*tx39*) mips_fpu=HARD_FLOATING_POINT mips_fpu_bitsize=32 ;; # start-sanitize-r5900 @@ -144,7 +143,7 @@ case "${target}" in sim_m16_filter="16" ;; # end-sanitize-tx19 - mipstx39*-*-*) sim_default_gen=IGEN + mipst*tx39*) sim_default_gen=IGEN sim_use_gen=IGEN sim_igen_filter="32,f" sim_igen_machine="-M r3900" @@ -239,6 +238,18 @@ esac AC_SUBST(mips_extra_objs) + +# Add simulated hardware devices +# +SIM_AC_OPTION_HARDWARE() +case "${target}" in +# start-sanitize-tx3904 + mips*tx39*) SIM_AC_OPTION_HARDWARE(,tx3904cpu tx3904irc) ;; +# end-sanitize-tx3904 + *) ;; +esac + + AC_PATH_X mips_extra_libs="" # start-sanitize-sky diff --git a/sim/mips/dv-tx3904cpu.c b/sim/mips/dv-tx3904cpu.c new file mode 100644 index 00000000000..f756f22c37f --- /dev/null +++ b/sim/mips/dv-tx3904cpu.c @@ -0,0 +1,230 @@ +/* This file is part of the program GDB, the GU debugger. + + Copyright (C) 1998 Free Software Foundation, Inc. + Contributed by Cygnus Solutions. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + + */ + + +#include "sim-main.h" +#include "hw-base.h" + +/* DEVICE + + + tx3904cpu - tx3904 cpu virtual device + + + DESCRIPTION + + + Implements the external tx3904 functionality. This includes the + delivery of of interrupts generated from other devices and the + handling of device specific registers. + + + PROPERTIES + + none + + + PORTS + + + reset (input) + + Currently ignored. + + + nmi (input) + + Deliver a non-maskable interrupt to the processor. + + + level (input) + + Deliver a maskable interrupt of given level, corresponding to + IP[5:0], to processor. + + + + BUGS + + + When delivering an interrupt, this code assumes that there is only + one processor (number 0). + + This code does not attempt to be efficient at handling pending + interrupts. It simply schedules the interrupt delivery handler + every instruction cycle until all pending interrupts go away. An + alternative implementation might modify instructions that change + the PSW and have them check to see if the change makes an interrupt + delivery possible. + + */ + + + +struct tx3904cpu { + /* Pending interrupts for delivery by event handler */ + int pending_reset, pending_nmi, pending_level; +}; + + + +/* input port ID's */ + +enum { + RESET_PORT, + NMI_PORT, + LEVEL_PORT, +}; + + +static const struct hw_port_descriptor tx3904cpu_ports[] = { + + /* interrupt inputs */ + { "reset", RESET_PORT, 0, input_port, }, + { "nmi", NMI_PORT, 0, input_port, }, + { "level", LEVEL_PORT, 0, input_port, }, + + { NULL, }, +}; + + +/* Finish off the partially created hw device. Attach our local + callbacks. Wire up our port names etc */ + +static hw_port_event_callback tx3904cpu_port_event; + + + +static void +tx3904cpu_finish (struct hw *me) +{ + struct tx3904cpu *controller; + + controller = HW_ZALLOC (me, struct tx3904cpu); + set_hw_data (me, controller); + set_hw_ports (me, tx3904cpu_ports); + set_hw_port_event (me, tx3904cpu_port_event); + + /* Initialize the pending interrupt flags */ + controller->pending_level = 0; + controller->pending_reset = 0; + controller->pending_nmi = 0; +} + + + +/* An event arrives on an interrupt port */ + +static void +deliver_tx3904cpu_interrupt (struct hw *me, + void *data) +{ + struct tx3904cpu *controller = hw_data (me); + SIM_DESC simulator = hw_system (me); + sim_cpu *cpu = STATE_CPU (simulator, 0); /* NB: fix CPU 0. */ + address_word cia = CIA_GET (cpu); + +#define CPU cpu +#define SD current_state + + if (controller->pending_reset) + { + controller->pending_reset = 0; + HW_TRACE ((me, "reset pc=0x%08lx", (long) CIA_GET (cpu))); + SignalExceptionNMIReset(); + } + else if (controller->pending_nmi) + { + controller->pending_nmi = 0; + HW_TRACE ((me, "nmi pc=0x%08lx", (long) CIA_GET (cpu))); + SignalExceptionNMIReset(); + } + else if (controller->pending_level) + { + HW_TRACE ((me, "interrupt level=%d pc=0x%08lx sr=0x%08lx", + controller->pending_level, + (long) CIA_GET (cpu), (long) SR)); + + /* Don't overwrite the CAUSE field since we have no good place to clear + it again. The specs allow it to be zero by the time the interrupt + handler is invoked. */ + /* CAUSE &= ~ (cause_IP_mask << cause_IP_shift); + CAUSE |= (controller->pending_level & cause_IP_mask) << cause_IP_shift; */ + + /* check for enabled / unmasked interrupts */ + if((SR & status_IEc) && + (controller->pending_level & ((SR >> status_IM_shift) & status_IM_mask))) + { + controller->pending_level = 0; + SignalExceptionInterrupt(); + } + else + { + /* reschedule soon */ + hw_event_queue_schedule (me, 1, deliver_tx3904cpu_interrupt, NULL); + } + } +#undef CPU cpu +#undef SD current_state +} + + +static void +tx3904cpu_port_event (struct hw *me, + int my_port, + struct hw *source, + int source_port, + int level) +{ + struct tx3904cpu *controller = hw_data (me); + + switch (my_port) + { + case RESET_PORT: + controller->pending_reset = 1; + HW_TRACE ((me, "port-in reset")); + break; + + case NMI_PORT: + controller->pending_nmi = 1; + HW_TRACE ((me, "port-in nmi")); + break; + + case LEVEL_PORT: + controller->pending_level |= level; /* accumulate bits until they are cleared */ + HW_TRACE ((me, "port-in level=%d", level)); + break; + + default: + hw_abort (me, "bad switch"); + break; + } + + /* Schedule an event to be delivered immediately after current + instruction. */ + hw_event_queue_schedule (me, 0, deliver_tx3904cpu_interrupt, NULL); +} + + +const struct hw_device_descriptor dv_tx3904cpu_descriptor[] = { + { "tx3904cpu", tx3904cpu_finish, }, + { NULL }, +}; diff --git a/sim/mips/dv-tx3904irc.c b/sim/mips/dv-tx3904irc.c new file mode 100644 index 00000000000..f11f4c0ae96 --- /dev/null +++ b/sim/mips/dv-tx3904irc.c @@ -0,0 +1,392 @@ +/* This file is part of the program GDB, the GNU debugger. + + Copyright (C) 1998 Free Software Foundation, Inc. + Contributed by Cygnus Solutions. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + + */ + + +#include "sim-main.h" +#include "hw-base.h" + + +/* DEVICE + + + tx3904irc - tx3904 interrupt controller + + + DESCRIPTION + + + Implements the tx3904 interrupt controller described in the tx3904 + user guide. It does not include the interrupt detection circuit + that preprocesses the eight external interrupts. + + + PROPERTIES + + + reg + + Base of IRC control register bank. must equal 0x20. + Registers offsets: 0: ISR: interrupt status register + 4: IMR: interrupt mask register + 16: ILR0: interrupt level register 3..0 + 20: ILR1: interrupt level register 7..4 + 24: ILR2: interrupt level register 11..8 + 28: ILR3: interrupt level register 15..12 + + + + PORTS + + + ip (output) + + Interrupt priority port. An event is generated when an interrupt + of a sufficient priority is passed through the IRC. The value + associated with the event is the interrupt level (16-31), as given + for bits IP[5:0] in the book TMPR3904F Rev. 2.0, pg. 11-3. Note + that even though INT[0] is tied externally to IP[5], we simulate + it as passing through the controller. + + + int0-7 (input) + + External interrupts. + + + dmac0-3 (input) + + DMA internal interrupts, correspond to DMA channels 0-3. + + + sio0-1 (input) + + SIO internal interrupts. + + + tmr0-2 (input) + + Timer internal interrupts. + + */ + + + +/* port ID's */ + +enum { + /* inputs, ordered to correspond to interrupt sources 0..15 */ + INT1_PORT = 0, INT2_PORT, INT3_PORT, INT4_PORT, INT5_PORT, INT6_PORT, INT7_PORT, + DMAC3_PORT, DMAC2_PORT, DMAC1_PORT, DMAC0_PORT, SIO0_PORT, SIO1_PORT, + TMR0_PORT, TMR1_PORT, TMR2_PORT, + + /* special INT[0] port */ + INT0_PORT, + + /* reset */ + RESET_PORT, + + /* output */ + IP_PORT +}; + + +/* register numbers; each is one word long */ +enum { + ISR_REG = 0, + IMR_REG = 1, + ILR0_REG = 4, + ILR1_REG = 5, + ILR2_REG = 6, + ILR3_REG = 7, +}; + + + +static const struct hw_port_descriptor tx3904irc_ports[] = { + + /* interrupt output */ + + { "ip", IP_PORT, 0, output_port, }, + + /* interrupt inputs (as names) */ + /* in increasing order of level number */ + + { "int1", INT1_PORT, 0, input_port, }, + { "int2", INT2_PORT, 0, input_port, }, + { "int3", INT3_PORT, 0, input_port, }, + { "int4", INT4_PORT, 0, input_port, }, + { "int5", INT5_PORT, 0, input_port, }, + { "int6", INT6_PORT, 0, input_port, }, + { "int7", INT7_PORT, 0, input_port, }, + + { "dmac3", DMAC3_PORT, 0, input_port, }, + { "dmac2", DMAC2_PORT, 0, input_port, }, + { "dmac1", DMAC1_PORT, 0, input_port, }, + { "dmac0", DMAC0_PORT, 0, input_port, }, + + { "sio0", SIO0_PORT, 0, input_port, }, + { "sio1", SIO1_PORT, 0, input_port, }, + + { "tmr0", TMR0_PORT, 0, input_port, }, + { "tmr1", TMR1_PORT, 0, input_port, }, + { "tmr2", TMR2_PORT, 0, input_port, }, + + { "reset", RESET_PORT, 0, input_port, }, + { "int0", INT0_PORT, 0, input_port, }, + + { NULL, }, +}; + + +#define NR_SOURCES (TMR3_PORT - INT1_PORT + 1) /* 16: number of interrupt sources */ + + +/* The interrupt controller register internal state. Note that we + store state using the control register images, in host endian + order. */ + +struct tx3904irc { + address_word base_address; /* control register base */ + unsigned_4 isr; +#define ISR_SET(c,s) ((c)->isr &= ~ (1 << (s))) + unsigned_4 imr; +#define IMR_GET(c) ((c)->imr) + unsigned_4 ilr[4]; +#define ILR_GET(c,s) LSEXTRACTED32((c)->ilr[(s)/4], (s) % 4 * 8 + 2, (s) % 4 * 8) +}; + + + +/* Finish off the partially created hw device. Attach our local + callbacks. Wire up our port names etc */ + +static hw_io_read_buffer_callback tx3904irc_io_read_buffer; +static hw_io_write_buffer_callback tx3904irc_io_write_buffer; +static hw_port_event_callback tx3904irc_port_event; + +static void +attach_tx3904irc_regs (struct hw *me, + struct tx3904irc *controller) +{ + unsigned_word attach_address; + int attach_space; + unsigned attach_size; + reg_property_spec reg; + + if (hw_find_property (me, "reg") == NULL) + hw_abort (me, "Missing \"reg\" property"); + + if (!hw_find_reg_array_property (me, "reg", 0, ®)) + hw_abort (me, "\"reg\" property must contain one addr/size entry"); + + hw_unit_address_to_attach_address (hw_parent (me), + ®.address, + &attach_space, + &attach_address, + me); + hw_unit_size_to_attach_size (hw_parent (me), + ®.size, + &attach_size, me); + + hw_attach_address (hw_parent (me), 0, + attach_space, attach_address, attach_size, + me); + + controller->base_address = attach_address; +} + + +static void +tx3904irc_finish (struct hw *me) +{ + int i; + struct tx3904irc *controller; + + controller = HW_ZALLOC (me, struct tx3904irc); + set_hw_data (me, controller); + set_hw_io_read_buffer (me, tx3904irc_io_read_buffer); + set_hw_io_write_buffer (me, tx3904irc_io_write_buffer); + set_hw_ports (me, tx3904irc_ports); + set_hw_port_event (me, tx3904irc_port_event); + + /* Attach ourself to our parent bus */ + attach_tx3904irc_regs (me, controller); + + /* Initialize to reset state */ + controller->isr = 0x0000ffff; + controller->imr = 0; + controller->ilr[0] = + controller->ilr[1] = + controller->ilr[2] = + controller->ilr[3] = 0; +} + + + +/* An event arrives on an interrupt port */ + +static void +tx3904irc_port_event (struct hw *me, + int my_port, + struct hw *source, + int source_port, + int level) +{ + struct tx3904irc *controller = hw_data (me); + + switch (my_port) + { + case INT0_PORT: + { + int ip_number = 32; /* compute IP[5:0] */ + HW_TRACE ((me, "port-event INT[0]")); + hw_port_event(me, IP_PORT, ip_number); + break; + } + + case INT1_PORT: case INT2_PORT: case INT3_PORT: case INT4_PORT: + case INT5_PORT: case INT6_PORT: case INT7_PORT: case DMAC3_PORT: + case DMAC2_PORT: case DMAC1_PORT: case DMAC0_PORT: case SIO0_PORT: + case SIO1_PORT: case TMR0_PORT: case TMR1_PORT: case TMR2_PORT: + { + int source = my_port - INT1_PORT; + + HW_TRACE ((me, "port-event interrupt source %d", source)); + ISR_SET(controller, source); + if(ILR_GET(controller, source) > IMR_GET(controller)) + { + int ip_number = 16 + source; /* compute IP[4:0] */ + HW_TRACE ((me, "interrupt level %d", ILR_GET(controller,source))); + hw_port_event(me, IP_PORT, ip_number); + } + break; + } + + case RESET_PORT: + { + HW_TRACE ((me, "reset")); + controller->isr = 0x0000ffff; + controller->imr = 0; + controller->ilr[0] = + controller->ilr[1] = + controller->ilr[2] = + controller->ilr[3] = 0; + break; + } + + case IP_PORT: + hw_abort (me, "Event on output port %d", my_port); + break; + + default: + hw_abort (me, "Event on unknown port %d", my_port); + break; + } +} + + +/* generic read/write */ + +static unsigned +tx3904irc_io_read_buffer (struct hw *me, + void *dest, + int space, + unsigned_word base, + unsigned nr_bytes) +{ + struct tx3904irc *controller = hw_data (me); + unsigned byte; + + HW_TRACE ((me, "read 0x%08lx %d", (long) base, (int) nr_bytes)); + for (byte = 0; byte < nr_bytes; byte++) + { + address_word address = base + byte; + int reg_number = (address - controller->base_address) / 4; + int reg_offset = (address - controller->base_address) % 4; + unsigned_4 register_value; /* in target byte order */ + + /* fill in entire register_value word */ + switch (reg_number) + { + case ISR_REG: register_value = controller->isr; break; + case IMR_REG: register_value = controller->imr; break; + case ILR0_REG: register_value = controller->ilr[0]; break; + case ILR1_REG: register_value = controller->ilr[1]; break; + case ILR2_REG: register_value = controller->ilr[2]; break; + case ILR3_REG: register_value = controller->ilr[3]; break; + default: register_value = 0; + } + + /* write requested byte out */ + memcpy(dest+byte, ((char*)& register_value)+reg_offset, 1); + } + + return nr_bytes; +} + + + +static unsigned +tx3904irc_io_write_buffer (struct hw *me, + const void *source, + int space, + unsigned_word base, + unsigned nr_bytes) +{ + struct tx3904irc *controller = hw_data (me); + unsigned byte; + + HW_TRACE ((me, "write 0x%08lx %d", (long) base, (int) nr_bytes)); + for (byte = 0; byte < nr_bytes; byte++) + { + address_word address = base + byte; + int reg_number = (address - controller->base_address) / 4; + int reg_offset = (address - controller->base_address) % 4; + unsigned_4* register_ptr; + unsigned_4 register_value; + + /* fill in entire register_value word */ + switch (reg_number) + { + case ISR_REG: register_ptr = & controller->isr; break; + case IMR_REG: register_ptr = & controller->imr; break; + case ILR0_REG: register_ptr = & controller->ilr[0]; break; + case ILR1_REG: register_ptr = & controller->ilr[1]; break; + case ILR2_REG: register_ptr = & controller->ilr[2]; break; + case ILR3_REG: register_ptr = & controller->ilr[3]; break; + default: register_ptr = & register_value; /* used as a dummy */ + } + + HW_TRACE ((me, "reg %d pre: %08lx", reg_number, (long) *register_ptr)); + + /* overwrite requested byte */ + memcpy(((char*)register_ptr)+reg_offset, source+byte, 1); + + HW_TRACE ((me, "post: %08lx", (long) *register_ptr)); + } + return nr_bytes; +} + + +const struct hw_device_descriptor dv_tx3904irc_descriptor[] = { + { "tx3904irc", tx3904irc_finish, }, + { NULL }, +}; diff --git a/sim/mips/interp.c b/sim/mips/interp.c index ff1252def55..f83fdc3a31b 100644 --- a/sim/mips/interp.c +++ b/sim/mips/interp.c @@ -37,6 +37,7 @@ code on the hardware. #include "sim-utils.h" #include "sim-options.h" #include "sim-assert.h" +#include "sim-hw.h" /* start-sanitize-sky */ #ifdef TARGET_SKY @@ -113,6 +114,7 @@ char* pr_uword64 PARAMS ((uword64 addr)); halt is required. NOTE: Care must be taken, since this value may be used in later revisions of the MIPS ISA. */ #define HALT_INSTRUCTION (0x03ff000d) +#define HALT_INSTRUCTION2 (0x0000ffcd) #define HALT_INSTRUCTION_MASK (0x03FFFFC0) @@ -180,6 +182,10 @@ FILE *tracefh = NULL; static void open_trace PARAMS((SIM_DESC sd)); #endif /* TRACE */ +/* simulation target board. NULL=canonical */ +static char* board = NULL; + + static DECLARE_OPTION_HANDLER (mips_option_handler); enum { @@ -195,8 +201,10 @@ enum { ,OPTION_GS_REFRESH2 #endif /* end-sanitize-sky */ + ,OPTION_BOARD }; + static SIM_RC mips_option_handler (sd, cpu, opt, arg, is_command) SIM_DESC sd; @@ -265,10 +273,10 @@ Re-compile simulator with \"-DTRACE\" to enable this option.\n"); #ifdef SKY_FUNIT case OPTION_FLOAT_TYPE: /* Use host (fast) or target (accurate) floating point implementation. */ - if (arg && strcmp (arg, "host") == 0) - STATE_FP_TYPE_OPT (sd) &= ~STATE_FP_TYPE_OPT_TARGET; - else if (arg && strcmp (arg, "target") == 0) - STATE_FP_TYPE_OPT (sd) |= STATE_FP_TYPE_OPT_TARGET; + if (arg && strcmp (arg, "fast") == 0) + STATE_FP_TYPE_OPT (sd) &= ~STATE_FP_TYPE_OPT_ACCURATE; + else if (arg && strcmp (arg, "accurate") == 0) + STATE_FP_TYPE_OPT (sd) |= STATE_FP_TYPE_OPT_ACCURATE; else { fprintf (stderr, "Unrecognized float-type option `%s'\n", arg); @@ -318,11 +326,22 @@ Re-compile simulator with \"-DTRACE\" to enable this option.\n"); #endif /* end-sanitize-sky */ + + case OPTION_BOARD: + { + if (arg) + { + board = zalloc(strlen(arg) + 1); + strcpy(board, arg); + } + return SIM_RC_OK; + } } - + return SIM_RC_OK; } + static const OPTION mips_options[] = { { {"dinero-trace", optional_argument, NULL, OPTION_DINERO_TRACE}, @@ -335,7 +354,7 @@ static const OPTION mips_options[] = #ifdef TARGET_SKY #ifdef SKY_FUNIT { {"float-type", required_argument, NULL, OPTION_FLOAT_TYPE}, - '\0', "host|target", "Use host (fast) or target (accurate) floating point", + '\0', "fast|accurate", "Use fast (host) or accurate (target) floating point", mips_option_handler }, #endif { {"enable-gs", required_argument, NULL, OPTION_GS_ENABLE}, @@ -349,6 +368,19 @@ static const OPTION mips_options[] = mips_option_handler }, #endif /* end-sanitize-sky */ + + { {"board", required_argument, NULL, OPTION_BOARD}, + '\0', "none" /* rely on compile-time string concatenation for other options */ + +/* start-sanitize-tx3904 */ +#define BOARD_JMR3904 "jmr3904" + "|" BOARD_JMR3904 +#define BOARD_JMR3904_DEBUG "jmr3904debug" + "|" BOARD_JMR3904_DEBUG +/* end-sanitize-tx3904 */ + + , "Customize simulation for a particular board.", mips_option_handler }, + { {NULL, no_argument, NULL, 0}, '\0', NULL, NULL, NULL } }; @@ -359,6 +391,7 @@ static void interrupt_event (SIM_DESC sd, void *data) { sim_cpu *cpu = STATE_CPU (sd, 0); /* FIXME */ + address_word cia = CIA_GET (cpu); if (SR & status_IE) { interrupt_pending = 0; @@ -397,8 +430,8 @@ sim_open (kind, cb, abfd, argv) /* start-sanitize-sky */ #if defined(TARGET_SKY) && defined(SKY_FUNIT) - /* Set "--float-type host" as the default. */ - STATE_FP_TYPE_OPT (sd) &= ~STATE_FP_TYPE_OPT_TARGET; + /* Set "--float-type fast" as the default. */ + STATE_FP_TYPE_OPT (sd) &= ~STATE_FP_TYPE_OPT_ACCURATE; #endif /* end-sanitize-sky */ @@ -413,33 +446,6 @@ sim_open (kind, cb, abfd, argv) return 0; sim_add_option_table (sd, NULL, mips_options); - /* Allocate core managed memory */ - - /* the monitor */ - sim_do_commandf (sd, "memory region 0x%lx,0x%lx", MONITOR_BASE, MONITOR_SIZE); - /* For compatibility with the old code - under this (at level one) - are the kernel spaces K0 & K1. Both of these map to a single - smaller sub region */ - sim_do_command(sd," memory region 0x7fff8000,0x8000") ; /* MTZ- 32 k stack */ -/* start-sanitize-sky */ -#ifndef TARGET_SKY -/* end-sanitize-sky */ - sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx%%0x%lx,0x%0x", - K1BASE, K0SIZE, - MEM_SIZE, /* actual size */ - K0BASE); -/* start-sanitize-sky */ -#else - sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx%%0x%lx,0x%0x,0x%0x", - K1BASE, K0SIZE, - MEM_SIZE, /* actual size */ - K0BASE, - 0); /* add alias at 0x0000 */ -#endif -/* end-sanitize-sky */ - - device_init(sd); - /* getopt will print the error message so we just have to exit if this fails. FIXME: Hmmm... in the case of gdb we need getopt to call print_filtered. */ @@ -451,6 +457,99 @@ sim_open (kind, cb, abfd, argv) return 0; } + /* handle board-specific memory maps */ + if (board == NULL) + { + /* Allocate core managed memory */ + + /* the monitor */ + sim_do_commandf (sd, "memory region 0x%lx,0x%lx", MONITOR_BASE, MONITOR_SIZE); + /* For compatibility with the old code - under this (at level one) + are the kernel spaces K0 & K1. Both of these map to a single + smaller sub region */ + sim_do_command(sd," memory region 0x7fff8000,0x8000") ; /* MTZ- 32 k stack */ + /* start-sanitize-sky */ +#ifndef TARGET_SKY + /* end-sanitize-sky */ + sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx%%0x%lx,0x%0x", + K1BASE, K0SIZE, + MEM_SIZE, /* actual size */ + K0BASE); + /* start-sanitize-sky */ +#else + sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx%%0x%lx,0x%0x,0x%0x", + K1BASE, K0SIZE, + MEM_SIZE, /* actual size */ + K0BASE, + 0); /* add alias at 0x0000 */ +#endif + /* end-sanitize-sky */ + + device_init(sd); + } + + /* start-sanitize-tx3904 */ + else if(! strcmp(board, BOARD_JMR3904) || + (! strcmp(board, BOARD_JMR3904_DEBUG))) + { + /* match VIRTUAL memory layout of JMR-TX3904 board */ + + /* --- memory --- */ + + /* ROM: 0x9FC0_0000 - 0x9FFF_FFFF and 0xBFC0_0000 - 0xBFFF_FFFF */ + sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx,0x%0x", + 0x9FC00000, + 4 * 1024 * 1024, /* 4 MB */ + 0xBFC00000); + + /* SRAM: 0x8000_0000 - 0x803F_FFFF and 0xA000_0000 - 0xA03F_FFFF */ + sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx,0x%0x", + 0x80000000, + 4 * 1024 * 1024, /* 4 MB */ + 0xA0000000); + + /* DRAM: 0x8800_0000 - 0x89FF_FFFF and 0xA800_0000 - 0xA9FF_FFFF */ + sim_do_commandf (sd, "memory alias 0x%lx@1,0x%lx,0x%0x", + 0x88000000, + 32 * 1024 * 1024, /* 32 MB */ + 0xA8000000); + + /* --- simulated devices --- */ + sim_hw_parse (sd, "/tx3904irc@0xffffc00/reg 0xffffc000 0x20"); + sim_hw_parse (sd, "/tx3904cpu"); + + /* -- device connections --- */ + sim_hw_parse (sd, "/tx3904irc > ip level /tx3904cpu"); + + if(! strcmp(board, BOARD_JMR3904_DEBUG)) + { + /* -- DEBUG: glue interrupt generators --- */ + sim_hw_parse (sd, "/glue@0xffff0000/reg 0xffff0000 0x50"); + sim_hw_parse (sd, "/glue@0xffff0000 > int0 int0 /tx3904irc"); + sim_hw_parse (sd, "/glue@0xffff0000 > int1 int1 /tx3904irc"); + sim_hw_parse (sd, "/glue@0xffff0000 > int2 int2 /tx3904irc"); + sim_hw_parse (sd, "/glue@0xffff0000 > int3 int3 /tx3904irc"); + sim_hw_parse (sd, "/glue@0xffff0000 > int4 int4 /tx3904irc"); + sim_hw_parse (sd, "/glue@0xffff0000 > int5 int5 /tx3904irc"); + sim_hw_parse (sd, "/glue@0xffff0000 > int6 int6 /tx3904irc"); + sim_hw_parse (sd, "/glue@0xffff0000 > int7 int7 /tx3904irc"); + sim_hw_parse (sd, "/glue@0xffff0000 > int8 dmac0 /tx3904irc"); + sim_hw_parse (sd, "/glue@0xffff0000 > int9 dmac1 /tx3904irc"); + sim_hw_parse (sd, "/glue@0xffff0000 > int10 dmac2 /tx3904irc"); + sim_hw_parse (sd, "/glue@0xffff0000 > int11 dmac3 /tx3904irc"); + sim_hw_parse (sd, "/glue@0xffff0000 > int12 sio0 /tx3904irc"); + sim_hw_parse (sd, "/glue@0xffff0000 > int13 sio1 /tx3904irc"); + sim_hw_parse (sd, "/glue@0xffff0000 > int14 tmr0 /tx3904irc"); + sim_hw_parse (sd, "/glue@0xffff0000 > int15 tmr1 /tx3904irc"); + sim_hw_parse (sd, "/glue@0xffff0000 > int16 tmr2 /tx3904irc"); + sim_hw_parse (sd, "/glue@0xffff0000 > int17 nmi /tx3904cpu"); + } + + device_init(sd); + } + /* end-sanitize-tx3904 */ + + /* check for/establish the a reference program image */ if (sim_analyze_program (sd, (STATE_PROG_ARGV (sd) != NULL @@ -1275,7 +1374,7 @@ sim_monitor (SIM_DESC sd, int width = 0, trunc = 0, haddot = 0, longlong = 0; while (sim_read (sd, s++, &c, 1) && c != '\0') { - if (strchr ("dobxXulscefg%", s)) + if (strchr ("dobxXulscefg%", c)) break; else if (c == '-') fmt = FMT_LJUST; @@ -1622,7 +1721,7 @@ ColdReset (SIM_DESC sd) { sim_cpu *cpu = STATE_CPU (sd, cpu_nr); /* RESET: Fixed PC address: */ - PC = UNSIGNED64 (0xFFFFFFFFBFC00000); + PC = (unsigned_word) UNSIGNED64 (0xFFFFFFFFBFC00000); /* The reset vector address is in the unmapped, uncached memory space. */ SR &= ~(status_SR | status_TS | status_RP); @@ -1760,8 +1859,8 @@ signal_exception (SIM_DESC sd, instruction = va_arg(ap,unsigned int); va_end(ap); /* Check for our special terminating BREAK: */ - if ((instruction & HALT_INSTRUCTION_MASK) - == (HALT_INSTRUCTION & HALT_INSTRUCTION_MASK)) + if ((instruction & HALT_INSTRUCTION_MASK) == (HALT_INSTRUCTION & HALT_INSTRUCTION_MASK) || + (instruction & HALT_INSTRUCTION_MASK) == (HALT_INSTRUCTION2 & HALT_INSTRUCTION_MASK)) { sim_engine_halt (SD, CPU, NULL, cia, sim_exited, (unsigned int)(A0 & 0xFFFFFFFF)); @@ -1781,6 +1880,28 @@ signal_exception (SIM_DESC sd, /* TODO: If not simulating exceptions then stop the simulator execution. At the moment we always stop the simulation. */ +#ifdef SUBTARGET_R3900 + /* update interrupt-related registers */ + + /* insert exception code in bits 6:2 */ + CAUSE = LSMASKED32(CAUSE, 31, 7) | LSINSERTED32(exception, 6, 2); + /* shift IE/KU history bits left */ + SR = LSMASKED32(SR, 31, 4) | LSINSERTED32(LSEXTRACTED32(SR, 3, 0), 5, 2); + + if (STATE & simDELAYSLOT) + { + STATE &= ~simDELAYSLOT; + CAUSE |= cause_BD; + EPC = (cia - 4); /* reference the branch instruction */ + } + else + EPC = cia; + + if (SR & status_BEV) + PC = (signed)0xBFC00000 + 0x180; + else + PC = (signed)0x80000000 + 0x080; +#else /* See figure 5-17 for an outline of the code below */ if (! (SR & status_EXL)) { @@ -1804,10 +1925,12 @@ signal_exception (SIM_DESC sd, SR |= status_EXL; /* Store exception code into current exception id variable (used by exit code): */ + if (SR & status_BEV) PC = (signed)0xBFC00200 + 0x180; else PC = (signed)0x80000000 + 0x180; +#endif switch ((CAUSE >> 2) & 0x1F) { @@ -1815,7 +1938,15 @@ signal_exception (SIM_DESC sd, /* Interrupts arrive during event processing, no need to restart */ return; - + + case NMIReset: + /* Ditto */ +#ifdef SUBTARGET_3900 + /* Exception vector: BEV=0 BFC00000 / BEF=1 BFC00000 */ + PC = (signed)0xBFC00000; +#endif SUBTARGET_3900 + return; + case TLBModification: case TLBLoad: case TLBStore: @@ -3304,6 +3435,14 @@ decode_coproc (SIM_DESC sd, else if (code == 0x10 && (instruction & 0x3f) == 0x10) { /* RFE */ +#ifdef SUBTARGET_R3900 + /* TX39: Copy IEp/KUp -> IEc/KUc, and IEo/KUo -> IEp/KUp */ + + /* shift IE/KU history bits right */ + SR = LSMASKED32(SR, 31, 4) | LSINSERTED32(LSEXTRACTED32(SR, 5, 2), 3, 0); + + /* TODO: CACHE register */ +#endif /* SUBTARGET_R3900 */ } else if (code == 0x10 && (instruction & 0x3f) == 0x1F) { diff --git a/sim/mips/mips.igen b/sim/mips/mips.igen index 303de9dfda7..a1f254c629b 100644 --- a/sim/mips/mips.igen +++ b/sim/mips/mips.igen @@ -124,6 +124,17 @@ } :function:::int:check_mt_hilo:hilo_history *history +*mipsI,mipsII,mipsIII,mipsIV: +*vr5000: +// start-sanitize-vr4320 +*vr4320: +// end-sanitize-vr4320 +// start-sanitize-vr5400 +*vr5400: +// end-sanitize-vr5400 +// start-sanitize-r5900 +*r5900: +// end-sanitize-r5900 { signed64 time = sim_events_time (SD); int ok = check_mf_cycles (SD_, history, time, "MT"); @@ -132,6 +143,18 @@ return ok; } +:function:::int:check_mt_hilo:hilo_history *history +*r3900: +// start-sanitize-tx19 +*tx19: +// end-sanitize-tx19 +{ + signed64 time = sim_events_time (SD); + history->mt.timestamp = time; + history->mt.cia = CIA; + return 1; +} + :function:::int:check_mf_hilo:hilo_history *history, hilo_history *peer { signed64 time = sim_events_time (SD); @@ -5351,6 +5374,7 @@ 010000,00000,5.RT,5.RD,00000,6.REGX:COP0:32::MFC0 "mfc0 r, r # " *mipsI,mipsII,mipsIII,mipsIV: +*r3900: *vr5000: // start-sanitize-vr4320 *vr4320: @@ -5389,6 +5413,28 @@ } +010000,10000,000000000000000,010000:COP0:32::RFE +"rfe" +*mipsI,mipsII,mipsIII,mipsIV: +// start-sanitize-tx19 +*tx19: +// end-sanitize-tx19 +*r3900: +// start-sanitize-vr4320 +*vr4320: +// end-sanitize-vr4320 +*vr5000: +// start-sanitize-vr5400 +*vr5400: +// end-sanitize-vr5400 +// start-sanitize-r5900 +*r5900: +// end-sanitize-r5900 +{ + DecodeCoproc (instruction_0); +} + + 010000,10000,000000000000000,001000:COP0:32::TLBP "tlbp" *mipsI,mipsII,mipsIII,mipsIV: diff --git a/sim/mips/sim-main.h b/sim/mips/sim-main.h index 690ea81b76a..295b127f947 100644 --- a/sim/mips/sim-main.h +++ b/sim/mips/sim-main.h @@ -561,7 +561,6 @@ struct _sim_cpu { /* start-sanitize-sky */ #ifdef TARGET_SKY #ifndef TM_TXVU_H - /* Number of machine registers */ #define NUM_VU_REGS 153 #define NUM_VU_INTEGER_REGS 16 @@ -574,7 +573,8 @@ struct _sim_cpu { #undef NUM_REGS #define NUM_REGS (NUM_R5900_REGS + 2*(NUM_VU_REGS) + 2*(NUM_VIF_REGS)) #endif /* no tm-txvu.h */ -#endif +#endif /* TARGET_SKY */ +/* end-sanitize-sky */ enum float_operation /* start-sanitize-sky */ @@ -665,7 +665,6 @@ enum float_operation hilo_history lo_history; #define LOHISTORY (&(CPU)->lo_history) - /* start-sanitize-r5900 */ sim_r5900_cpu r5900; @@ -675,7 +674,13 @@ enum float_operation /* The MDMX ISA has a very very large accumulator */ unsigned8 acc[3 * 8]; /* end-sanitize-vr5400 */ + /* start-sanitize-sky */ +#ifdef TARGET_SKY + /* Device on which instruction issue last occured. */ + char cur_device; +#endif + /* end-sanitize-sky */ sim_cpu_base base; }; @@ -709,7 +714,7 @@ struct sim_state { /* Record of option for floating point implementation type. */ int fp_type_opt; #define STATE_FP_TYPE_OPT(sd) ((sd)->fp_type_opt) -#define STATE_FP_TYPE_OPT_TARGET 0x80000000 +#define STATE_FP_TYPE_OPT_ACCURATE 0x80000000 #endif #endif /* end-sanitize-sky */ @@ -746,7 +751,29 @@ struct sim_state { #define status_CU2 (1 << 30) /* COP2 usable */ /* end-sanitize-r5900 */ -#define cause_BD ((unsigned)1 << 31) /* Exception in branch delay slot */ +/* Specializations for TX39 family */ +#define status_IEc (1 << 0) /* Interrupt enable (current) */ +#define status_KUc (1 << 1) /* Kernel/User mode */ +#define status_IEp (1 << 2) /* Interrupt enable (previous) */ +#define status_KUp (1 << 3) /* Kernel/User mode */ +#define status_IEo (1 << 4) /* Interrupt enable (old) */ +#define status_KUo (1 << 5) /* Kernel/User mode */ +#define status_IM_mask (0xff) /* Interrupt mask */ +#define status_IM_shift (8) +#define status_NMI (1 << 20) /* NMI */ +#define status_NMI (1 << 20) /* NMI */ + +#define cause_EXC_mask (0x1f) /* Exception code */ +#define cause_EXC_shift (2) +#define cause_SW0 (1 << 8) /* Software interrupt 0 */ +#define cause_SW1 (1 << 9) /* Software interrupt 1 */ +#define cause_IP_mask (0x3f) /* Interrupt pending field */ +#define cause_IP_shift (10) +#define cause_CE_mask (0x3) /* Coprocessor error */ +#define cause_CE_shift (28) + +#define cause_BD ((unsigned)1 << 31) /* Exception in branch delay slot */ + /* NOTE: We keep the following status flags as bit values (1 for true, 0 for false). This allows them to be used in binary boolean @@ -754,7 +781,11 @@ struct sim_state { value is. */ /* UserMode */ +#ifdef SUBTARGET_R3900 +#define UserMode ((SR & status_KUc) ? 1 : 0) +#else #define UserMode ((((SR & status_KSU_mask) >> status_KSU_shift) == ksu_user) ? 1 : 0) +#endif /* SUBTARGET_R3900 */ /* BigEndianMem */ /* Hardware configuration. Affects endianness of LoadMemory and @@ -799,6 +830,8 @@ struct sim_state { #define FPE (15) #define DebugBreakPoint (16) #define Watch (23) +#define NMIReset (31) + /* The following exception code is actually private to the simulator world. It is *NOT* a processor feature, and is used to signal @@ -807,7 +840,7 @@ struct sim_state { void signal_exception (SIM_DESC sd, sim_cpu *cpu, address_word cia, int exception, ...); #define SignalException(exc,instruction) signal_exception (SD, CPU, cia, (exc), (instruction)) -#define SignalExceptionInterrupt() signal_exception (SD, CPU, NULL_CIA, Interrupt) +#define SignalExceptionInterrupt() signal_exception (SD, CPU, cia, Interrupt) #define SignalExceptionInstructionFetch() signal_exception (SD, CPU, cia, InstructionFetch) #define SignalExceptionAddressStore() signal_exception (SD, CPU, cia, AddressStore) #define SignalExceptionAddressLoad() signal_exception (SD, CPU, cia, AddressLoad) @@ -815,7 +848,7 @@ void signal_exception (SIM_DESC sd, sim_cpu *cpu, address_word cia, int exceptio #define SignalExceptionFPE() signal_exception (SD, CPU, cia, FPE) #define SignalExceptionIntegerOverflow() signal_exception (SD, CPU, cia, IntegerOverflow) #define SignalExceptionCoProcessorUnusable() signal_exception (SD, CPU, cia, CoProcessorUnusable) - +#define SignalExceptionNMIReset() signal_exception (SD, CPU, cia, NMIReset) /* Co-processor accesses */ @@ -931,6 +964,38 @@ INLINE_SIM_MAIN (void) pending_tick PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_ char* pr_addr PARAMS ((SIM_ADDR addr)); char* pr_uword64 PARAMS ((uword64 addr)); +/* start-sanitize-sky */ +#ifdef TARGET_SKY +#ifdef SIM_ENGINE_HALT_HOOK +#undef SIM_ENGINE_HALT_HOOK +#endif + +void sky_sim_engine_halt PARAMS ((SIM_DESC sd, sim_cpu *last, sim_cia cia)); +#define SIM_ENGINE_HALT_HOOK(sd, last, cia) sky_sim_engine_halt(sd, last, cia); + +#ifndef TM_TXVU_H /* In case GDB hasn't been configured yet */ +enum txvu_cpu_context +{ + TXVU_CPU_AUTO = -1, /* context-sensitive context */ + TXVU_CPU_MASTER, /* R5900 core */ + TXVU_CPU_VU0, /* Vector units */ + TXVU_CPU_VU1, + TXVU_CPU_VIF0, /* FIFO's */ + TXVU_CPU_VIF1, + TXVU_CPU_LAST /* Count of context types */ +}; + +/* memory segment for communication with GDB */ +#define GDB_COMM_AREA 0x21010000 +#define GDB_COMM_SIZE 0x4000 + +/* Memory address containing last device to execute */ +#define LAST_DEVICE GDB_COMM_AREA + +#define BREAK_MASK 0x02 /* Breakpoint bit is #57 */ +#endif /* !TM_TXVU_H */ +#endif /* TARGET_SKY */ +/* end-sanitize-sky */ #if H_REVEALS_MODULE_P (SIM_MAIN_INLINE) #include "sim-main.c"