From: Kenneth Graunke <kenneth@whitecape.org>
Date: Wed, 8 Jun 2011 23:08:07 +0000 (-0700)
Subject: i965/fs: Add support for non-shadow textureGrad (TXD) on Ivybridge.
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=3fa910fff9f72d1adf33f0f4dea3d790a9ce04ab;p=mesa.git

i965/fs: Add support for non-shadow textureGrad (TXD) on Ivybridge.

This is somewhat ugly, but I couldn't think of a nicer way to handle the
interleaved coordinate/derivative parameter loading.

Ironlake and Sandybridge will still hit an assertion in visit().

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
---

diff --git a/src/mesa/drivers/dri/i965/brw_fs_emit.cpp b/src/mesa/drivers/dri/i965/brw_fs_emit.cpp
index 6b7c434949c..844b89b7dc3 100644
--- a/src/mesa/drivers/dri/i965/brw_fs_emit.cpp
+++ b/src/mesa/drivers/dri/i965/brw_fs_emit.cpp
@@ -273,7 +273,8 @@ fs_visitor::generate_tex(fs_inst *inst, struct brw_reg dst, struct brw_reg src)
 	 }
 	 break;
       case FS_OPCODE_TXD:
-	 assert(!"TXD isn't supported on gen5+ yet.");
+	 assert(!inst->shadow_compare);
+	 msg_type = GEN5_SAMPLER_MESSAGE_SAMPLE_DERIVS;
 	 break;
       }
    } else {
diff --git a/src/mesa/drivers/dri/i965/brw_fs_visitor.cpp b/src/mesa/drivers/dri/i965/brw_fs_visitor.cpp
index b4857871c78..72559465864 100644
--- a/src/mesa/drivers/dri/i965/brw_fs_visitor.cpp
+++ b/src/mesa/drivers/dri/i965/brw_fs_visitor.cpp
@@ -796,20 +796,52 @@ fs_visitor::emit_texture_gen7(ir_texture *ir, fs_reg dst, fs_reg coordinate,
       emit(BRW_OPCODE_MOV, fs_reg(MRF, base_mrf + mlen), this->result);
       mlen += reg_width;
       break;
-   case ir_txd:
+   case ir_txd: {
+      if (c->dispatch_width == 16)
+	 fail("Gen7 does not support sample_d/sample_d_c in SIMD16 mode.");
+
+      ir->lod_info.grad.dPdx->accept(this);
+      fs_reg dPdx = this->result;
+
+      ir->lod_info.grad.dPdy->accept(this);
+      fs_reg dPdy = this->result;
+
+      /* Load dPdx and the coordinate together:
+       * [hdr], [ref], x, dPdx.x, dPdy.x, y, dPdx.y, dPdy.y, z, dPdx.z, dPdy.z
+       */
+      for (int i = 0; i < ir->coordinate->type->vector_elements; i++) {
+	 fs_inst *inst = emit(BRW_OPCODE_MOV, fs_reg(MRF, base_mrf + mlen),
+			      coordinate);
+	 if (i < 3 && c->key.gl_clamp_mask[i] & (1 << sampler))
+	    inst->saturate = true;
+	 coordinate.reg_offset++;
+	 mlen += reg_width;
+
+	 emit(BRW_OPCODE_MOV, fs_reg(MRF, base_mrf + mlen), dPdx);
+	 dPdx.reg_offset++;
+	 mlen += reg_width;
+
+	 emit(BRW_OPCODE_MOV, fs_reg(MRF, base_mrf + mlen), dPdy);
+	 dPdy.reg_offset++;
+	 mlen += reg_width;
+      }
+      break;
+   }
    case ir_txf:
       assert(!"GLSL 1.30 features unsupported");
       break;
    }
 
-   /* Set up the coordinate */
-   for (int i = 0; i < ir->coordinate->type->vector_elements; i++) {
-      fs_inst *inst = emit(BRW_OPCODE_MOV, fs_reg(MRF, base_mrf + mlen),
-			   coordinate);
-      if (i < 3 && c->key.gl_clamp_mask[i] & (1 << sampler))
-	 inst->saturate = true;
-      coordinate.reg_offset++;
-      mlen += reg_width;
+   /* Set up the coordinate (except for TXD where it was done earlier) */
+   if (ir->op != ir_txd) {
+      for (int i = 0; i < ir->coordinate->type->vector_elements; i++) {
+	 fs_inst *inst = emit(BRW_OPCODE_MOV, fs_reg(MRF, base_mrf + mlen),
+			      coordinate);
+	 if (i < 3 && c->key.gl_clamp_mask[i] & (1 << sampler))
+	    inst->saturate = true;
+	 coordinate.reg_offset++;
+	 mlen += reg_width;
+      }
    }
 
    /* Generate the SEND */