From: Roland Pesch Date: Mon, 18 Jan 1993 23:59:57 +0000 (+0000) Subject: Clean up readline doc subdir to conform to normal X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=413c3a483a581516c1bc8cdc261fbbb8458622d5;p=binutils-gdb.git Clean up readline doc subdir to conform to normal configure/distribution practices. Makefile: remove, replacing with a configurable Makefile.in texindex.c texinfo.tex: remove, replacing with references to tools elsewhere in Cygnus distribution tree. Makefile.in: configurable (and useable) Makefile. configure.in: pro forma configure stub. --- diff --git a/readline/doc/Makefile b/readline/doc/Makefile deleted file mode 100644 index 01e4bbb5df9..00000000000 --- a/readline/doc/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# This file was generated automatically by configure. Do not edit. -VPATH = . -links = -host_alias = ncr3000 -host_cpu = i386 -host_vendor = ncr -host_os = sysv4 -target_alias = ncr3000 -target_cpu = i386 -target_vendor = ncr -target_os = sysv4 -host_makefile_frag = ../config/mh-ncr3000 -ALL=all.internal diff --git a/readline/doc/Makefile.in b/readline/doc/Makefile.in new file mode 100644 index 00000000000..5e0d2d569e1 --- /dev/null +++ b/readline/doc/Makefile.in @@ -0,0 +1,94 @@ +## Copyright (C) 1993 Free Software Foundation, Inc. + +# Makefile for Readline documentation. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +srcdir = . + +prefix = /usr/local + +infodir = $(prefix)/info + +SHELL = /bin/sh + +INSTALL = install -c +INSTALL_DATA = $(INSTALL) + +# where to find texinfo +TEXIDIR=$(srcdir)/../../texinfo + +# where to find makeinfo, preferably one designed for texinfo-2 +MAKEINFO=makeinfo + +# auxiliary program for sorting Texinfo indices +TEXINDEX=texindex + +# Don Knuth's TeX formatter +TEX=tex + +#### Host, target, and site specific Makefile fragments come in here. +### + +all: info dvi + +install: install-info + +info: history.info readline.info + +dvi: history.dvi readline.dvi + +install-info: info + -parent=`echo $(infodir)|sed -e 's@/[^/]*$$@@'`; \ + if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi + -if [ -d $(infodir) ] ; then true ; else mkdir $(infodir) ; fi + for i in *.info* ; do \ + $(INSTALL_DATA) $$i $(infodir)/$$i ; \ + done + +history.info: hist.texinfo hsuser.texinfo hstech.texinfo + $(MAKEINFO) -I $(srcdir) -o ./history.info $(srcdir)/hist.texinfo + +history.dvi: hist.texinfo hsuser.texinfo hstech.texinfo $(TEXIDIR)/texinfo.tex + TEXINPUTS=${TEXIDIR}:$(srcdir):$$TEXINPUTS $(TEX) hist.texinfo + $(TEXINDEX) hist.?? + TEXINPUTS=${TEXIDIR}:$(srcdir):$$TEXINPUTS $(TEX) hist.texinfo + +readline.info: rlman.texinfo rluser.texinfo rltech.texinfo + $(MAKEINFO) -I $(srcdir) -o ./readline.info $(srcdir)/rlman.texinfo + +readline.dvi: rlman.texinfo rluser.texinfo rltech.texinfo + TEXINPUTS=${TEXIDIR}:$(srcdir):$$TEXINPUTS $(TEX) rlman.texinfo + $(TEXINDEX) rlman.?? + TEXINPUTS=${TEXIDIR}:$(srcdir):$$TEXINPUTS $(TEX) rlman.texinfo + +distclean: clean + rm -f Makefile config.status + +mostlyclean: clean + +realclean: distclean + +clean: clean-info clean-dvi + +clean-info: + rm -f history.info* readline.info* + +clean-dvi: + rm -f hist.?? hist.??? + rm -f rlman.?? rlman.??? + +Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag) + $(SHELL) ./config.status diff --git a/readline/doc/configure.in b/readline/doc/configure.in new file mode 100644 index 00000000000..c082c568c65 --- /dev/null +++ b/readline/doc/configure.in @@ -0,0 +1,8 @@ +srcname="READLINE doc" +srctrigger=rlman.texinfo +# per-host: + +# per-target: + +files="" +links="" diff --git a/readline/doc/texindex.c b/readline/doc/texindex.c deleted file mode 100644 index cb979da7afa..00000000000 --- a/readline/doc/texindex.c +++ /dev/null @@ -1,1606 +0,0 @@ -/* Prepare Tex index dribble output into an actual index. - Copyright (C) 1987 Free Software Foundation, Inc. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 1, or (at your option) - any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ - -#include -#include -#include -extern int errno; - -#ifdef VMS -#ifndef VAX11C -#define noshare -#endif - -#include -#include - -#define EXIT_SUCCESS ((1 << 28) | 1) -#define EXIT_FATAL ((1 << 28) | 4) -#define unlink delete -#define tell(fd) lseek(fd, 0L, 1) - -#else /* Not VMS */ - -#ifdef USG -#include -#include -#endif -#include - -#define EXIT_SUCCESS 0 -#define EXIT_FATAL 1 - -#endif /* Not VMS */ - - -#ifndef L_XTND -#define L_XTND 2 -#endif - -#ifdef VMS -extern noshare int sys_nerr; -extern noshare char *sys_errlist[]; -#else -extern int sys_nerr; -extern char *sys_errlist[]; -#endif - -/* When sorting in core, this structure describes one line - and the position and length of its first keyfield. */ - -struct lineinfo - { - char *text; /* The actual text of the line */ - union - { /* The start of the key (for textual comparison) */ - char *text; - long number; /* or the numeric value (for numeric comparison) */ - } key; - long keylen; /* Length of key field */ - }; - -/* This structure describes a field to use as a sort key */ - -struct keyfield - { - int startwords; /* # words to skip */ - int startchars; /* and # additional chars to skip, to start of field */ - int endwords; /* similar, from beg (or end) of line, to find end of field */ - int endchars; - char ignore_blanks; /* Ignore spaces and tabs within the field */ - char fold_case; /* Convert upper case to lower before comparing */ - char reverse; /* Compare in reverse order */ - char numeric; /* Parse text as an integer and compare the integers */ - char positional; /* Sort according to position within the file */ - char braced; /* Count balanced-braced groupings as fields */ - }; - -/* Vector of keyfields to use */ - -struct keyfield keyfields[3]; - -/* Number of keyfields stored in that vector. */ - -int num_keyfields = 3; - -/* Vector of input file names, terminated with a zero (null pointer) */ - -char **infiles; - -/* Vector of corresponding output file names, or zero meaning default it */ - -char **outfiles; - -/* Length of `infiles' */ - -int num_infiles; - -/* Pointer to the array of pointers to lines being sorted */ - -char **linearray; - -/* The allocated length of `linearray'. */ - -long nlines; - -/* Directory to use for temporary files. On Unix, it ends with a slash. */ - -char *tempdir; - -/* Start of filename to use for temporary files. */ - -char *tempbase; - -/* Number of last temporary file. */ - -int tempcount; - -/* Number of last temporary file already deleted. - Temporary files are deleted by `flush_tempfiles' in order of creation. */ - -int last_deleted_tempcount; - -/* During in-core sort, this points to the base of the data block - which contains all the lines of data. */ - -char *text_base; - -/* Additional command switches */ - -int keep_tempfiles; /* Nonzero means do not delete tempfiles -- for debugging */ - -/* Forward declarations of functions in this file */ - -void decode_command (); -void sort_in_core (); -void sort_offline (); -char **parsefile (); -char *find_field (); -char *find_pos (); -long find_value (); -char *find_braced_pos (); -char *find_braced_end (); -void writelines (); -int compare_full (); -long readline (); -int merge_files (); -int merge_direct (); -char *concat (); -char *maketempname (); -void flush_tempfiles (); -char *tempcopy (); - -extern char *mktemp (); - -#define MAX_IN_CORE_SORT 500000 - -int -main (argc, argv) - int argc; - char **argv; -{ - int i; - - tempcount = 0; - last_deleted_tempcount = 0; - - /* Describe the kind of sorting to do. */ - /* The first keyfield uses the first braced field and folds case */ - keyfields[0].braced = 1; - keyfields[0].fold_case = 1; - keyfields[0].endwords = -1; - keyfields[0].endchars = -1; - /* The second keyfield uses the second braced field, numerically */ - keyfields[1].braced = 1; - keyfields[1].numeric = 1; - keyfields[1].startwords = 1; - keyfields[1].endwords = -1; - keyfields[1].endchars = -1; - /* The third keyfield (which is ignored while discarding duplicates) - compares the whole line */ - keyfields[2].endwords = -1; - keyfields[2].endchars = -1; - - decode_command (argc, argv); - - tempbase = mktemp (concat ("txiXXXXXX", "", "")); - - /* Process input files completely, one by one. */ - - for (i = 0; i < num_infiles; i++) - { - int desc; - long ptr; - char *outfile; - char *p; - - desc = open (infiles[i], 0, 0); - if (desc < 0) pfatal_with_name (infiles[i]); - lseek (desc, 0, L_XTND); - ptr = tell (desc); - close (desc); - - outfile = outfiles[i]; - if (!outfile) - { - outfile = concat (infiles[i], "s", ""); - } - - if (ptr < MAX_IN_CORE_SORT) - /* Sort a small amount of data */ - sort_in_core (infiles[i], ptr, outfile); - else - sort_offline (infiles[i], ptr, outfile); - } - - flush_tempfiles (tempcount); - exit (EXIT_SUCCESS); -} - -/* This page decodes the command line arguments to set the parameter variables - and set up the vector of keyfields and the vector of input files */ - -void -decode_command (argc, argv) - int argc; - char **argv; -{ - int i; - char **ip; - char **op; - - /* Store default values into parameter variables */ - -#ifdef VMS - tempdir = "sys$scratch:"; -#else - tempdir = "/tmp/"; -#endif - - keep_tempfiles = 0; - - /* Allocate argc input files, which must be enough. */ - - infiles = (char **) xmalloc (argc * sizeof (char *)); - outfiles = (char **) xmalloc (argc * sizeof (char *)); - ip = infiles; - op = outfiles; - - /* First find all switches that control the default kind-of-sort */ - - for (i = 1; i < argc; i++) - { - int tem = classify_arg (argv[i]); - char c; - char *p; - - if (tem <= 0) - { - *ip++ = argv[i]; - *op++ = 0; - continue; - } - if (tem > 1) - { - if (i + 1 == argc) - fatal ("switch %s given with no argument following it", argv[i]); - else if (!strcmp (argv[i], "-T")) - tempdir = argv[i + 1]; - else if (!strcmp (argv[i], "-o")) - *(op - 1) = argv[i + 1]; - i += tem - 1; - continue; - } - - p = &argv[i][1]; - while (c = *p++) - switch (c) - { - case 'k': - keep_tempfiles = 1; - break; - - default: - fatal ("invalid command switch %c", c); - } - switchdone: ; - } - - /* Record number of keyfields, terminate list of filenames */ - - num_infiles = ip - infiles; - *ip = 0; -} - -/* Return 0 for an argument that is not a switch; - for a switch, return 1 plus the number of following arguments that the switch swallows. -*/ - -int -classify_arg (arg) - char *arg; -{ - if (!strcmp (arg, "-T") || !strcmp (arg, "-o")) - return 2; - if (arg[0] == '-') - return 1; - return 0; -} - -/* Create a name for a temporary file */ - -char * -maketempname (count) - int count; -{ - char tempsuffix[10]; - sprintf (tempsuffix, "%d", count); - return concat (tempdir, tempbase, tempsuffix); -} - -/* Delete all temporary files up to the specified count */ - -void -flush_tempfiles (to_count) - int to_count; -{ - if (keep_tempfiles) return; - while (last_deleted_tempcount < to_count) - unlink (maketempname (++last_deleted_tempcount)); -} - -/* Copy an input file into a temporary file, and return the temporary file name */ - -#define BUFSIZE 1024 - -char * -tempcopy (idesc) - int idesc; -{ - char *outfile = maketempname (++tempcount); - int odesc; - char buffer[BUFSIZE]; - - odesc = open (outfile, O_WRONLY | O_CREAT, 0666); - - if (odesc < 0) pfatal_with_name (outfile); - - while (1) - { - int nread = read (idesc, buffer, BUFSIZE); - write (odesc, buffer, nread); - if (!nread) break; - } - - close (odesc); - - return outfile; -} - -/* Compare two lines, provided as pointers to pointers to text, - according to the specified set of keyfields */ - -int -compare_full (line1, line2) - char **line1, **line2; -{ - int i; - - /* Compare using the first keyfield; - if that does not distinguish the lines, try the second keyfield; and so on. */ - - for (i = 0; i < num_keyfields; i++) - { - long length1, length2; - char *start1 = find_field (&keyfields[i], *line1, &length1); - char *start2 = find_field (&keyfields[i], *line2, &length2); - int tem = compare_field (&keyfields[i], start1, length1, *line1 - text_base, - start2, length2, *line2 - text_base); - if (tem) - { - if (keyfields[i].reverse) - return - tem; - return tem; - } - } - - return 0; /* Lines match exactly */ -} - -/* Compare two lines described by structures - in which the first keyfield is identified in advance. - For positional sorting, assumes that the order of the lines in core - reflects their nominal order. */ - -int -compare_prepared (line1, line2) - struct lineinfo *line1, *line2; -{ - int i; - int tem; - char *text1, *text2; - - /* Compare using the first keyfield, which has been found for us already */ - if (keyfields->positional) - { - if (line1->text - text_base > line2->text - text_base) - tem = 1; - else - tem = -1; - } - else if (keyfields->numeric) - tem = line1->key.number - line2->key.number; - else - tem = compare_field (keyfields, line1->key.text, line1->keylen, 0, line2->key.text, line2->keylen, 0); - if (tem) - { - if (keyfields->reverse) - return - tem; - return tem; - } - - text1 = line1->text; - text2 = line2->text; - - /* Compare using the second keyfield; - if that does not distinguish the lines, try the third keyfield; and so on. */ - - for (i = 1; i < num_keyfields; i++) - { - long length1, length2; - char *start1 = find_field (&keyfields[i], text1, &length1); - char *start2 = find_field (&keyfields[i], text2, &length2); - int tem = compare_field (&keyfields[i], start1, length1, text1 - text_base, - start2, length2, text2 - text_base); - if (tem) - { - if (keyfields[i].reverse) - return - tem; - return tem; - } - } - - return 0; /* Lines match exactly */ -} - -/* Like compare_full but more general. - You can pass any strings, and you can say how many keyfields to use. - `pos1' and `pos2' should indicate the nominal positional ordering of - the two lines in the input. */ - -int -compare_general (str1, str2, pos1, pos2, use_keyfields) - char *str1, *str2; - long pos1, pos2; - int use_keyfields; -{ - int i; - - /* Compare using the first keyfield; - if that does not distinguish the lines, try the second keyfield; and so on. */ - - for (i = 0; i < use_keyfields; i++) - { - long length1, length2; - char *start1 = find_field (&keyfields[i], str1, &length1); - char *start2 = find_field (&keyfields[i], str2, &length2); - int tem = compare_field (&keyfields[i], start1, length1, pos1, start2, length2, pos2); - if (tem) - { - if (keyfields[i].reverse) - return - tem; - return tem; - } - } - - return 0; /* Lines match exactly */ -} - -/* Find the start and length of a field in `str' according to `keyfield'. - A pointer to the starting character is returned, and the length - is stored into the int that `lengthptr' points to. */ - -char * -find_field (keyfield, str, lengthptr) - struct keyfield *keyfield; - char *str; - long *lengthptr; -{ - char *start; - char *end; - char *(*fun) (); - - if (keyfield->braced) fun = find_braced_pos; - else fun = find_pos; - - start = ( *fun )(str, keyfield->startwords, keyfield->startchars, - keyfield->ignore_blanks); - if (keyfield->endwords < 0) - { - if (keyfield->braced) - end = find_braced_end (start); - else - { - end = start; - while (*end && *end != '\n') end++; - } - } - else - { - end = ( *fun )(str, keyfield->endwords, keyfield->endchars, 0); - if (end - str < start - str) end = start; - } - *lengthptr = end - start; - return start; -} - -/* Find a pointer to a specified place within `str', - skipping (from the beginning) `words' words and then `chars' chars. - If `ignore_blanks' is nonzero, we skip all blanks - after finding the specified word. */ - -char * -find_pos (str, words, chars, ignore_blanks) - char *str; - int words, chars; - int ignore_blanks; -{ - int i; - char *p = str; - - for (i = 0; i < words; i++) - { - char c; - /* Find next bunch of nonblanks and skip them. */ - while ((c = *p) == ' ' || c == '\t') p++; - while ((c = *p) && c != '\n' && !(c == ' ' || c == '\t')) p++; - if (!*p || *p == '\n') return p; - } - - while (*p == ' ' || *p == '\t') p++; - - for (i = 0; i < chars; i++) - { - if (!*p || *p == '\n') break; - p++; - } - return p; -} - -/* Like find_pos but assumes that each field is surrounded by braces - and that braces within fields are balanced. */ - -char * -find_braced_pos (str, words, chars, ignore_blanks) - char *str; - int words, chars; - int ignore_blanks; -{ - int i; - int bracelevel; - char *p = str; - char c; - - for (i = 0; i < words; i++) - { - bracelevel = 1; - while ((c = *p++) != '{' && c != '\n' && c); - if (c != '{') - return p - 1; - while (bracelevel) - { - c = *p++; - if (c == '{') bracelevel++; - if (c == '}') bracelevel--; -#if 0 - if (c == '\\' || c == '@') c = *p++; /* \ quotes braces and \ */ -#endif - if (c == 0 || c == '\n') return p-1; - } - } - - while ((c = *p++) != '{' && c != '\n' && c); - - if (c != '{') - return p-1; - - if (ignore_blanks) - while ((c = *p) == ' ' || c == '\t') p++; - - for (i = 0; i < chars; i++) - { - if (!*p || *p == '\n') break; - p++; - } - return p; -} - -/* Find the end of the balanced-brace field which starts at `str'. - The position returned is just before the closing brace. */ - -char * -find_braced_end (str) - char *str; -{ - int bracelevel; - char *p = str; - char c; - - bracelevel = 1; - while (bracelevel) - { - c = *p++; - if (c == '{') bracelevel++; - if (c == '}') bracelevel--; -#if 0 - if (c == '\\' || c == '@') c = *p++; -#endif - if (c == 0 || c == '\n') return p-1; - } - return p - 1; -} - -long -find_value (start, length) - char *start; - long length; -{ - while (length != 0L) { - if (isdigit(*start)) - return atol(start); - length--; - start++; - } - return 0l; -} - -/* Vector used to translate characters for comparison. - This is how we make all alphanumerics follow all else, - and ignore case in the first sorting. */ -int char_order[256]; - -init_char_order () -{ - int i; - for (i = 1; i < 256; i++) - char_order[i] = i; - - for (i = '0'; i <= '9'; i++) - char_order[i] += 512; - - for (i = 'a'; i <= 'z'; i++) { - char_order[i] = 512 + i; - char_order[i + 'A' - 'a'] = 512 + i; - } -} - -/* Compare two fields (each specified as a start pointer and a character count) - according to `keyfield'. The sign of the value reports the relation between the fields */ - -int -compare_field (keyfield, start1, length1, pos1, start2, length2, pos2) - struct keyfield *keyfield; - char *start1; - long length1; - long pos1; - char *start2; - long length2; - long pos2; -{ - if (keyfields->positional) - { - if (pos1 > pos2) - return 1; - else - return -1; - } - if (keyfield->numeric) - { - long value = find_value (start1, length1) - find_value (start2, length2); - if (value > 0) return 1; - if (value < 0) return -1; - return 0; - } - else - { - char *p1 = start1; - char *p2 = start2; - char *e1 = start1 + length1; - char *e2 = start2 + length2; - - int fold_case = keyfield->fold_case; - - while (1) - { - int c1, c2; - - if (p1 == e1) c1 = 0; - else c1 = *p1++; - if (p2 == e2) c2 = 0; - else c2 = *p2++; - - if (char_order[c1] != char_order[c2]) - return char_order[c1] - char_order[c2]; - if (!c1) break; - } - - /* Strings are equal except possibly for case. */ - p1 = start1; - p2 = start2; - while (1) - { - int c1, c2; - - if (p1 == e1) c1 = 0; - else c1 = *p1++; - if (p2 == e2) c2 = 0; - else c2 = *p2++; - - if (c1 != c2) - /* Reverse sign here so upper case comes out last. */ - return c2 - c1; - if (!c1) break; - } - - return 0; - } -} - -/* A `struct linebuffer' is a structure which holds a line of text. - `readline' reads a line from a stream into a linebuffer - and works regardless of the length of the line. */ - -struct linebuffer - { - long size; - char *buffer; - }; - -/* Initialize a linebuffer for use */ - -void -initbuffer (linebuffer) - struct linebuffer *linebuffer; -{ - linebuffer->size = 200; - linebuffer->buffer = (char *) xmalloc (200); -} - -/* Read a line of text from `stream' into `linebuffer'. - Return the length of the line. */ - -long -readline (linebuffer, stream) - struct linebuffer *linebuffer; - FILE *stream; -{ - char *buffer = linebuffer->buffer; - char *p = linebuffer->buffer; - char *end = p + linebuffer->size; - - while (1) - { - int c = getc (stream); - if (p == end) - { - buffer = (char *) xrealloc (buffer, linebuffer->size *= 2); - p += buffer - linebuffer->buffer; - end += buffer - linebuffer->buffer; - linebuffer->buffer = buffer; - } - if (c < 0 || c == '\n') - { - *p = 0; - break; - } - *p++ = c; - } - - return p - buffer; -} - -/* Sort an input file too big to sort in core. */ - -void -sort_offline (infile, nfiles, total, outfile) - char *infile; - long total; - char *outfile; -{ - int ntemps = 2 * (total + MAX_IN_CORE_SORT - 1) / MAX_IN_CORE_SORT; /* More than enough */ - char **tempfiles = (char **) xmalloc (ntemps * sizeof (char *)); - FILE *istream = fopen (infile, "r"); - int i; - struct linebuffer lb; - long linelength; - int failure = 0; - - initbuffer (&lb); - - /* Read in one line of input data. */ - - linelength = readline (&lb, istream); - - if (lb.buffer[0] != '\\' && lb.buffer[0] != '@') - { - error ("%s: not a texinfo index file", infile); - return; - } - - /* Split up the input into `ntemps' temporary files, or maybe fewer, - and put the new files' names into `tempfiles' */ - - for (i = 0; i < ntemps; i++) - { - char *outname = maketempname (++tempcount); - FILE *ostream = fopen (outname, "w"); - long tempsize = 0; - - if (!ostream) pfatal_with_name (outname); - tempfiles[i] = outname; - - /* Copy lines into this temp file as long as it does not make file "too big" - or until there are no more lines. */ - - while (tempsize + linelength + 1 <= MAX_IN_CORE_SORT) - { - tempsize += linelength + 1; - fputs (lb.buffer, ostream); - putc ('\n', ostream); - - /* Read another line of input data. */ - - linelength = readline (&lb, istream); - if (!linelength && feof (istream)) break; - - if (lb.buffer[0] != '\\' && lb.buffer[0] != '@') - { - error ("%s: not a texinfo index file", infile); - failure = 1; - goto fail; - } - } - fclose (ostream); - if (feof (istream)) break; - } - - free (lb.buffer); - - fail: - /* Record number of temp files we actually needed. */ - - ntemps = i; - - /* Sort each tempfile into another tempfile. - Delete the first set of tempfiles and put the names of the second into `tempfiles' */ - - for (i = 0; i < ntemps; i++) - { - char *newtemp = maketempname (++tempcount); - sort_in_core (&tempfiles[i], MAX_IN_CORE_SORT, newtemp); - if (!keep_tempfiles) - unlink (tempfiles[i]); - tempfiles[i] = newtemp; - } - - if (failure) - return; - - /* Merge the tempfiles together and indexify */ - - merge_files (tempfiles, ntemps, outfile); -} - -/* Sort `infile', whose size is `total', - assuming that is small enough to be done in-core, - then indexify it and send the output to `outfile' (or to stdout). */ - -void -sort_in_core (infile, total, outfile) - char *infile; - long total; - char *outfile; -{ - char **nextline; - char *data = (char *) xmalloc (total + 1); - char *file_data; - long file_size; - int i; - FILE *ostream = stdout; - struct lineinfo *lineinfo; - - /* Read the contents of the file into the moby array `data' */ - - int desc = open (infile, 0, 0); - - if (desc < 0) - fatal ("failure reopening %s", infile); - for (file_size = 0; ; ) - { - if ((i = read (desc, data + file_size, total - file_size)) <= 0) - break; - file_size += i; - } - file_data = data; - data[file_size] = 0; - - close (desc); - - if (file_size > 0 && data[0] != '\\' && data[0] != '@') - { - error ("%s: not a texinfo index file", infile); - return; - } - - init_char_order (); - - /* Sort routines want to know this address */ - - text_base = data; - - /* Create the array of pointers to lines, with a default size frequently enough. */ - - nlines = total / 50; - if (!nlines) nlines = 2; - linearray = (char **) xmalloc (nlines * sizeof (char *)); - - /* `nextline' points to the next free slot in this array. - `nlines' is the allocated size. */ - - nextline = linearray; - - /* Parse the input file's data, and make entries for the lines. */ - - nextline = parsefile (infile, nextline, file_data, file_size); - if (nextline == 0) - { - error ("%s: not a texinfo index file", infile); - return; - } - - /* Sort the lines */ - - /* If we have enough space, find the first keyfield of each line in advance. - Make a `struct lineinfo' for each line, which records the keyfield - as well as the line, and sort them. */ - - lineinfo = (struct lineinfo *) malloc ((nextline - linearray) * sizeof (struct lineinfo)); - - if (lineinfo) - { - struct lineinfo *lp; - char **p; - - for (lp = lineinfo, p = linearray; p != nextline; lp++, p++) - { - lp->text = *p; - lp->key.text = find_field (keyfields, *p, &lp->keylen); - if (keyfields->numeric) - lp->key.number = find_value (lp->key.text, lp->keylen); - } - - qsort (lineinfo, nextline - linearray, sizeof (struct lineinfo), compare_prepared); - - for (lp = lineinfo, p = linearray; p != nextline; lp++, p++) - *p = lp->text; - - free (lineinfo); - } - else - qsort (linearray, nextline - linearray, sizeof (char *), compare_full); - - /* Open the output file */ - - if (outfile) - { - ostream = fopen (outfile, "w"); - if (!ostream) - pfatal_with_name (outfile); - } - - writelines (linearray, nextline - linearray, ostream); - if (outfile) fclose (ostream); - - free (linearray); - free (data); -} - -/* Parse an input string in core into lines. - DATA is the input string, and SIZE is its length. - Data goes in LINEARRAY starting at NEXTLINE. - The value returned is the first entry in LINEARRAY still unused. - Value 0 means input file contents are invalid. */ - -char ** -parsefile (filename, nextline, data, size) - char *filename; - char **nextline; - char *data; - long size; -{ - char *p, *end; - char **line = nextline; - - p = data; - end = p + size; - *end = 0; - - while (p != end) - { - if (p[0] != '\\' && p[0] != '@') - return 0; - - *line = p; - while (*p && *p != '\n') p++; - if (p != end) p++; - - line++; - if (line == linearray + nlines) - { - char **old = linearray; - linearray = (char **) xrealloc (linearray, sizeof (char *) * (nlines *= 4)); - line += linearray - old; - } - } - - return line; -} - -/* Indexification is a filter applied to the sorted lines - as they are being written to the output file. - Multiple entries for the same name, with different page numbers, - get combined into a single entry with multiple page numbers. - The first braced field, which is used for sorting, is discarded. - However, its first character is examined, folded to lower case, - and if it is different from that in the previous line fed to us - a \initial line is written with one argument, the new initial. - - If an entry has four braced fields, then the second and third - constitute primary and secondary names. - In this case, each change of primary name - generates a \primary line which contains only the primary name, - and in between these are \secondary lines which contain - just a secondary name and page numbers. -*/ - -/* The last primary name we wrote a \primary entry for. - If only one level of indexing is being done, this is the last name seen */ -char *lastprimary; -int lastprimarylength; /* Length of storage allocated for lastprimary */ - -/* Similar, for the secondary name. */ -char *lastsecondary; -int lastsecondarylength; - -/* Zero if we are not in the middle of writing an entry. - One if we have written the beginning of an entry but have not - yet written any page numbers into it. - Greater than one if we have written the beginning of an entry - plus at least one page number. */ -int pending; - -/* The initial (for sorting purposes) of the last primary entry written. - When this changes, a \initial {c} line is written */ - -char * lastinitial; - -int lastinitiallength; - -/* When we need a string of length 1 for the value of lastinitial, - store it here. */ - -char lastinitial1[2]; - -/* Initialize static storage for writing an index */ - -void -init_index () -{ - pending = 0; - lastinitial = lastinitial1; - lastinitial1[0] = 0; - lastinitial1[1] = 0; - lastinitiallength = 0; - lastprimarylength = 100; - lastprimary = (char *) xmalloc (lastprimarylength + 1); - bzero (lastprimary, lastprimarylength + 1); - lastsecondarylength = 100; - lastsecondary = (char *) xmalloc (lastsecondarylength + 1); - bzero (lastsecondary, lastsecondarylength + 1); -} - -/* Indexify. Merge entries for the same name, - insert headers for each initial character, etc. */ - -indexify (line, ostream) - char *line; - FILE *ostream; -{ - char *primary, *secondary, *pagenumber; - int primarylength, secondarylength, pagelength; - int len = strlen (line); - int nosecondary; - int initiallength; - char *initial; - char initial1[2]; - register char *p; - - /* First, analyze the parts of the entry fed to us this time */ - - p = find_braced_pos (line, 0, 0, 0); - if (*p == '{') - { - initial = p; - /* Get length of inner pair of braces starting at p, - including that inner pair of braces. */ - initiallength = find_braced_end (p + 1) + 1 - p; - } - else - { - initial = initial1; - initial1[0] = *p; - initial1[1] = 0; - initiallength = 1; - - if (initial1[0] >= 'a' && initial1[0] <= 'z') - initial1[0] -= 040; - } - - pagenumber = find_braced_pos (line, 1, 0, 0); - pagelength = find_braced_end (pagenumber) - pagenumber; - if (pagelength == 0) - abort (); - - primary = find_braced_pos (line, 2, 0, 0); - primarylength = find_braced_end (primary) - primary; - - secondary = find_braced_pos (line, 3, 0, 0); - nosecondary = !*secondary; - if (!nosecondary) - secondarylength = find_braced_end (secondary) - secondary; - - /* If the primary is different from before, make a new primary entry */ - if (strncmp (primary, lastprimary, primarylength)) - { - /* Close off current secondary entry first, if one is open */ - if (pending) - { - fputs ("}\n", ostream); - pending = 0; - } - - /* If this primary has a different initial, include an entry for the initial */ - if (initiallength != lastinitiallength || - strncmp (initial, lastinitial, initiallength)) - { - fprintf (ostream, "\\initial {"); - fwrite (initial, 1, initiallength, ostream); - fprintf (ostream, "}\n", initial); - if (initial == initial1) - { - lastinitial = lastinitial1; - *lastinitial1 = *initial1; - } - else - { - lastinitial = initial; - } - lastinitiallength = initiallength; - } - - /* Make the entry for the primary. */ - if (nosecondary) - fputs ("\\entry {", ostream); - else - fputs ("\\primary {", ostream); - fwrite (primary, primarylength, 1, ostream); - if (nosecondary) - { - fputs ("}{", ostream); - pending = 1; - } - else - fputs ("}\n", ostream); - - /* Record name of most recent primary */ - if (lastprimarylength < primarylength) - { - lastprimarylength = primarylength + 100; - lastprimary = (char *) xrealloc (lastprimary, - 1 + lastprimarylength); - } - strncpy (lastprimary, primary, primarylength); - lastprimary[primarylength] = 0; - - /* There is no current secondary within this primary, now */ - lastsecondary[0] = 0; - } - - /* Should not have an entry with no subtopic following one with a subtopic */ - - if (nosecondary && *lastsecondary) - error ("entry %s follows an entry with a secondary name", line); - - /* Start a new secondary entry if necessary */ - if (!nosecondary && strncmp (secondary, lastsecondary, secondarylength)) - { - if (pending) - { - fputs ("}\n", ostream); - pending = 0; - } - - /* Write the entry for the secondary. */ - fputs ("\\secondary {", ostream); - fwrite (secondary, secondarylength, 1, ostream); - fputs ("}{", ostream); - pending = 1; - - /* Record name of most recent secondary */ - if (lastsecondarylength < secondarylength) - { - lastsecondarylength = secondarylength + 100; - lastsecondary = (char *) xrealloc (lastsecondary, - 1 + lastsecondarylength); - } - strncpy (lastsecondary, secondary, secondarylength); - lastsecondary[secondarylength] = 0; - } - - /* Here to add one more page number to the current entry */ - if (pending++ != 1) - fputs (", ", ostream); /* Punctuate first, if this is not the first */ - fwrite (pagenumber, pagelength, 1, ostream); -} - -/* Close out any unfinished output entry */ - -void -finish_index (ostream) - FILE *ostream; -{ - if (pending) - fputs ("}\n", ostream); - free (lastprimary); - free (lastsecondary); -} - -/* Copy the lines in the sorted order. - Each line is copied out of the input file it was found in. */ - -void -writelines (linearray, nlines, ostream) - char **linearray; - int nlines; - FILE *ostream; -{ - char **stop_line = linearray + nlines; - char **next_line; - - init_index (); - - /* Output the text of the lines, and free the buffer space */ - - for (next_line = linearray; next_line != stop_line; next_line++) - { - /* If -u was specified, output the line only if distinct from previous one. */ - if (next_line == linearray - /* Compare previous line with this one, using only the explicitly specd keyfields */ - || compare_general (*(next_line - 1), *next_line, 0L, 0L, num_keyfields - 1)) - { - char *p = *next_line; - char c; - while ((c = *p++) && c != '\n'); - *(p-1) = 0; - indexify (*next_line, ostream); - } - } - - finish_index (ostream); -} - -/* Assume (and optionally verify) that each input file is sorted; - merge them and output the result. - Returns nonzero if any input file fails to be sorted. - - This is the high-level interface that can handle an unlimited number of files. */ - -#define MAX_DIRECT_MERGE 10 - -int -merge_files (infiles, nfiles, outfile) - char **infiles; - int nfiles; - char *outfile; -{ - char **tempfiles; - int ntemps; - int i; - int value = 0; - int start_tempcount = tempcount; - - if (nfiles <= MAX_DIRECT_MERGE) - return merge_direct (infiles, nfiles, outfile); - - /* Merge groups of MAX_DIRECT_MERGE input files at a time, - making a temporary file to hold each group's result. */ - - ntemps = (nfiles + MAX_DIRECT_MERGE - 1) / MAX_DIRECT_MERGE; - tempfiles = (char **) xmalloc (ntemps * sizeof (char *)); - for (i = 0; i < ntemps; i++) - { - int nf = MAX_DIRECT_MERGE; - if (i + 1 == ntemps) - nf = nfiles - i * MAX_DIRECT_MERGE; - tempfiles[i] = maketempname (++tempcount); - value |= merge_direct (&infiles[i * MAX_DIRECT_MERGE], nf, tempfiles[i]); - } - - /* All temporary files that existed before are no longer needed - since their contents have been merged into our new tempfiles. - So delete them. */ - flush_tempfiles (start_tempcount); - - /* Now merge the temporary files we created. */ - - merge_files (tempfiles, ntemps, outfile); - - free (tempfiles); - - return value; -} - -/* Assume (and optionally verify) that each input file is sorted; - merge them and output the result. - Returns nonzero if any input file fails to be sorted. - - This version of merging will not work if the number of - input files gets too high. Higher level functions - use it only with a bounded number of input files. */ - -int -merge_direct (infiles, nfiles, outfile) - char **infiles; - int nfiles; - char *outfile; -{ - char **ip = infiles; - struct linebuffer *lb1, *lb2; - struct linebuffer **thisline, **prevline; - FILE **streams; - int i; - int nleft; - int lossage = 0; - int *file_lossage; - struct linebuffer *prev_out = 0; - FILE *ostream = stdout; - - if (outfile) - { - ostream = fopen (outfile, "w"); - } - if (!ostream) pfatal_with_name (outfile); - - init_index (); - - if (nfiles == 0) - { - if (outfile) - fclose (ostream); - return 0; - } - - /* For each file, make two line buffers. - Also, for each file, there is an element of `thisline' - which points at any time to one of the file's two buffers, - and an element of `prevline' which points to the other buffer. - `thisline' is supposed to point to the next available line from the file, - while `prevline' holds the last file line used, - which is remembered so that we can verify that the file is properly sorted. */ - - /* lb1 and lb2 contain one buffer each per file */ - lb1 = (struct linebuffer *) xmalloc (nfiles * sizeof (struct linebuffer)); - lb2 = (struct linebuffer *) xmalloc (nfiles * sizeof (struct linebuffer)); - - /* thisline[i] points to the linebuffer holding the next available line in file i, - or is zero if there are no lines left in that file. */ - thisline = (struct linebuffer **) xmalloc (nfiles * sizeof (struct linebuffer *)); - /* prevline[i] points to the linebuffer holding the last used line from file i. - This is just for verifying that file i is properly sorted. */ - prevline = (struct linebuffer **) xmalloc (nfiles * sizeof (struct linebuffer *)); - /* streams[i] holds the input stream for file i. */ - streams = (FILE **) xmalloc (nfiles * sizeof (FILE *)); - /* file_lossage[i] is nonzero if we already know file i is not properly sorted. */ - file_lossage = (int *) xmalloc (nfiles * sizeof (int)); - - /* Allocate and initialize all that storage */ - - for (i = 0; i < nfiles; i++) - { - initbuffer (&lb1[i]); - initbuffer (&lb2[i]); - thisline[i] = &lb1[i]; - prevline[i] = &lb2[i]; - file_lossage[i] = 0; - streams[i] = fopen (infiles[i], "r"); - if (!streams[i]) - pfatal_with_name (infiles[i]); - - readline (thisline[i], streams[i]); - } - - /* Keep count of number of files not at eof */ - nleft = nfiles; - - while (nleft) - { - struct linebuffer *best = 0; - struct linebuffer *exch; - int bestfile = -1; - int i; - - /* Look at the next avail line of each file; choose the least one. */ - - for (i = 0; i < nfiles; i++) - { - if (thisline[i] && - (!best || - 0 < compare_general (best->buffer, thisline[i]->buffer, - (long) bestfile, (long) i, num_keyfields))) - { - best = thisline[i]; - bestfile = i; - } - } - - /* Output that line, unless it matches the previous one and we don't want duplicates */ - - if (!(prev_out && - !compare_general (prev_out->buffer, best->buffer, 0L, 1L, num_keyfields - 1))) - indexify (best->buffer, ostream); - prev_out = best; - - /* Now make the line the previous of its file, and fetch a new line from that file */ - - exch = prevline[bestfile]; - prevline[bestfile] = thisline[bestfile]; - thisline[bestfile] = exch; - - while (1) - { - /* If the file has no more, mark it empty */ - - if (feof (streams[bestfile])) - { - thisline[bestfile] = 0; - nleft--; /* Update the number of files still not empty */ - break; - } - readline (thisline[bestfile], streams[bestfile]); - if (thisline[bestfile]->buffer[0] || !feof (streams[bestfile])) break; - } - } - - finish_index (ostream); - - /* Free all storage and close all input streams */ - - for (i = 0; i < nfiles; i++) - { - fclose (streams[i]); - free (lb1[i].buffer); - free (lb2[i].buffer); - } - free (file_lossage); - free (lb1); - free (lb2); - free (thisline); - free (prevline); - free (streams); - - if (outfile) - fclose (ostream); - - return lossage; -} - -/* Print error message and exit. */ - -fatal (s1, s2) - char *s1, *s2; -{ - error (s1, s2); - exit (EXIT_FATAL); -} - -/* Print error message. `s1' is printf control string, `s2' is arg for it. */ - -error (s1, s2) - char *s1, *s2; -{ - printf ("texindex: "); - printf (s1, s2); - printf ("\n"); -} - -perror_with_name (name) - char *name; -{ - char *s; - - if (errno < sys_nerr) - s = concat ("", sys_errlist[errno], " for %s"); - else - s = "cannot open %s"; - error (s, name); -} - -pfatal_with_name (name) - char *name; -{ - char *s; - - if (errno < sys_nerr) - s = concat ("", sys_errlist[errno], " for %s"); - else - s = "cannot open %s"; - fatal (s, name); -} - -/* Return a newly-allocated string whose contents concatenate those of s1, s2, s3. */ - -char * -concat (s1, s2, s3) - char *s1, *s2, *s3; -{ - int len1 = strlen (s1), len2 = strlen (s2), len3 = strlen (s3); - char *result = (char *) xmalloc (len1 + len2 + len3 + 1); - - strcpy (result, s1); - strcpy (result + len1, s2); - strcpy (result + len1 + len2, s3); - *(result + len1 + len2 + len3) = 0; - - return result; -} - -/* Like malloc but get fatal error if memory is exhausted. */ - -int -xmalloc (size) - int size; -{ - int result = malloc (size); - if (!result) - fatal ("virtual memory exhausted", 0); - return result; -} - - -int -xrealloc (ptr, size) - char *ptr; - int size; -{ - int result = realloc (ptr, size); - if (!result) - fatal ("virtual memory exhausted"); - return result; -} - -bzero (b, length) - register char *b; - register int length; -{ -#ifdef VMS - short zero = 0; - long max_str = 65535; - long len; - - while (length > max_str) - { - (void) LIB$MOVC5 (&zero, &zero, &zero, &max_str, b); - length -= max_str; - b += max_str; - } - len = length; - (void) LIB$MOVC5 (&zero, &zero, &zero, &len, b); -#else - while (length-- > 0) - *b++ = 0; -#endif /* not VMS */ -} diff --git a/readline/doc/texinfo.tex b/readline/doc/texinfo.tex deleted file mode 100644 index 1652c553d66..00000000000 --- a/readline/doc/texinfo.tex +++ /dev/null @@ -1,2883 +0,0 @@ -%% TeX macros to handle texinfo files - -% Copyright (C) 1985, 1986, 1988, 1990, 1991 Free Software Foundation, Inc. - -%This texinfo.tex file is free software; you can redistribute it and/or -%modify it under the terms of the GNU General Public License as -%published by the Free Software Foundation; either version 2, or (at -%your option) any later version. - -%This texinfo.tex file is distributed in the hope that it will be -%useful, but WITHOUT ANY WARRANTY; without even the implied warranty -%of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -%General Public License for more details. - -%You should have received a copy of the GNU General Public License -%along with this texinfo.tex file; see the file COPYING. If not, write -%to the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, -%USA. - - -%In other words, you are welcome to use, share and improve this program. -%You are forbidden to forbid anyone else to use, share and improve -%what you give them. Help stamp out software-hoarding! - -\def\texinfoversion{2.46} -\message{Loading texinfo package [Version \texinfoversion]:} -\message{} - -% Print the version number if in a .fmt file. -\everyjob{\message{[Texinfo version \texinfoversion]}\message{}} - -% Save some parts of plain tex whose names we will redefine. - -\let\ptexlbrace=\{ -\let\ptexrbrace=\} -\let\ptexdots=\dots -\let\ptexdot=\. -\let\ptexstar=\* -\let\ptexend=\end -\let\ptexbullet=\bullet -\let\ptexb=\b -\let\ptexc=\c -\let\ptexi=\i -\let\ptext=\t -\let\ptexl=\l -\let\ptexL=\L - -\def\tie{\penalty 10000\ } % Save plain tex definition of ~. - -\message{Basics,} -\chardef\other=12 - -\hyphenation{ap-pen-dix} -\hyphenation{mini-buf-fer mini-buf-fers} -\hyphenation{eshell} - -% Margin to add to right of even pages, to left of odd pages. -\newdimen \bindingoffset \bindingoffset=0pt -\newdimen \normaloffset \normaloffset=\hoffset -\newdimen\pagewidth \newdimen\pageheight -\pagewidth=\hsize \pageheight=\vsize - -%---------------------Begin change----------------------- -% -% Dimensions to add cropmarks at corners Added by P. A. MacKay, 12 Nov. 1986 -% -\newdimen\cornerlong \newdimen\cornerthick -\newdimen \topandbottommargin -\newdimen \outerhsize \newdimen \outervsize -\cornerlong=1pc\cornerthick=.3pt % These set size of cropmarks -\outerhsize=7in -\outervsize=9.5in -\topandbottommargin=.75in -% -%---------------------End change----------------------- - -% \onepageout takes a vbox as an argument. Note that \pagecontents -% does insertions itself, but you have to call it yourself. -\chardef\PAGE=255 \output={\onepageout{\pagecontents\PAGE}} -\def\onepageout#1{\hoffset=\normaloffset -\ifodd\pageno \advance\hoffset by \bindingoffset -\else \advance\hoffset by -\bindingoffset\fi -{\escapechar=`\\\relax % makes sure backslash is used in output files. -\shipout\vbox{{\let\hsize=\pagewidth \makeheadline} \pagebody{#1}% -{\let\hsize=\pagewidth \makefootline}}}% -\advancepageno \ifnum\outputpenalty>-20000 \else\dosupereject\fi} - - -% Here is a modification of the main output routine for Near East Publications -% This provides right-angle cropmarks at all four corners. -% The contents of the page are centerlined into the cropmarks, -% and any desired binding offset is added as an \hskip on either -% site of the centerlined box. (P. A. MacKay, 12 November, 1986) -% -\def\croppageout#1{\hoffset=0pt % make sure this doesn't mess things up - \shipout - \vbox to \outervsize{\hsize=\outerhsize - \vbox{\line{\ewtop\hfill\ewtop}} - \nointerlineskip - \line{\vbox{\moveleft\cornerthick\nstop} - \hfill - \vbox{\moveright\cornerthick\nstop}} - \vskip \topandbottommargin - \centerline{\ifodd\pageno\hskip\bindingoffset\fi - \vbox{ - {\let\hsize=\pagewidth \makeheadline} - \pagebody{#1} - {\let\hsize=\pagewidth \makefootline}} - \ifodd\pageno\else\hskip\bindingoffset\fi} - \vskip \topandbottommargin plus1fill minus1fill - \boxmaxdepth\cornerthick - \line{\vbox{\moveleft\cornerthick\nsbot} - \hfill - \vbox{\moveright\cornerthick\nsbot}} - \nointerlineskip - \vbox{\line{\ewbot\hfill\ewbot}} - } - \advancepageno - \ifnum\outputpenalty>-20000 \else\dosupereject\fi} -% -% Do @cropmarks to get crop marks -\def\cropmarks{\let\onepageout=\croppageout } - -\def\pagebody#1{\vbox to\pageheight{\boxmaxdepth=\maxdepth #1}} -{\catcode`\@ =11 -\gdef\pagecontents#1{\ifvoid\topins\else\unvbox\topins\fi -\dimen@=\dp#1 \unvbox#1 -\ifvoid\footins\else\vskip\skip\footins\footnoterule \unvbox\footins\fi -\ifr@ggedbottom \kern-\dimen@ \vfil \fi} -} - -% -% Here are the rules for the cropmarks. Note that they are -% offset so that the space between them is truly \outerhsize or \outervsize -% (P. A. MacKay, 12 November, 1986) -% -\def\ewtop{\vrule height\cornerthick depth0pt width\cornerlong} -\def\nstop{\vbox - {\hrule height\cornerthick depth\cornerlong width\cornerthick}} -\def\ewbot{\vrule height0pt depth\cornerthick width\cornerlong} -\def\nsbot{\vbox - {\hrule height\cornerlong depth\cornerthick width\cornerthick}} - -% Parse an argument, then pass it to #1. -% The argument can be delimited with [...] or with "..." or braces -% or it can be a whole line. -% #1 should be a macro which expects -% an ordinary undelimited TeX argument. - -\def\parsearg #1{\let\next=#1\begingroup\obeylines\futurelet\temp\parseargx} - -\def\parseargx{% -\ifx \obeyedspace\temp \aftergroup\parseargdiscardspace \else% -\aftergroup \parseargline % -\fi \endgroup} - -{\obeyspaces % -\gdef\parseargdiscardspace {\begingroup\obeylines\futurelet\temp\parseargx}} - -\gdef\obeyedspace{\ } - -\def\parseargline{\begingroup \obeylines \parsearglinex} -{\obeylines % -\gdef\parsearglinex #1^^M{\endgroup \next {#1}}} - -\def\flushcr{\ifx\par\lisppar \def\next##1{}\else \let\next=\relax \fi \next} - -%% These are used to keep @begin/@end levels from running away -%% Call \inENV within environments (after a \begingroup) -\newif\ifENV \ENVfalse \def\inENV{\ifENV\relax\else\ENVtrue\fi} -\def\ENVcheck{% -\ifENV\errmessage{Still within an environment. Type Return to continue.} -\endgroup\fi} % This is not perfect, but it should reduce lossage - -% @begin foo is the same as @foo, for now. -\newhelp\EMsimple{Type to continue} - -\outer\def\begin{\parsearg\beginxxx} - -\def\beginxxx #1{% -\expandafter\ifx\csname #1\endcsname\relax -{\errhelp=\EMsimple \errmessage{Undefined command @begin #1}}\else -\csname #1\endcsname\fi} - -%% @end foo executes the definition of \Efoo. -%% foo can be delimited by doublequotes or brackets. - -\def\end{\parsearg\endxxx} - -\def\endxxx #1{% -\expandafter\ifx\csname E#1\endcsname\relax -\expandafter\ifx\csname #1\endcsname\relax -\errmessage{Undefined command @end #1}\else -\errorE{#1}\fi\fi -\csname E#1\endcsname} -\def\errorE#1{ -{\errhelp=\EMsimple \errmessage{@end #1 not within #1 environment}}} - -% Single-spacing is done by various environments. - -\newskip\singlespaceskip \singlespaceskip = \baselineskip -\def\singlespace{% -{\advance \baselineskip by -\singlespaceskip -\kern \baselineskip}% -\baselineskip=\singlespaceskip -} - -%% Simple single-character @ commands - -% @@ prints an @ -% Kludge this until the fonts are right (grr). -\def\@{{\tt \char '100}} - -% Define @` and @' to be the same as ` and ' -% but suppressing ligatures. -\def\`{{`}} -\def\'{{'}} - -% Used to generate quoted braces. - -\def\mylbrace {{\tt \char '173}} -\def\myrbrace {{\tt \char '175}} -\let\{=\mylbrace -\let\}=\myrbrace - -% @: forces normal size whitespace following. -\def\:{\spacefactor=1000 } - -% @* forces a line break. -\def\*{\hfil\break\hbox{}\ignorespaces} - -% @. is an end-of-sentence period. -\def\.{.\spacefactor=3000 } - -% @w prevents a word break -\def\w #1{\hbox{#1}} - -% @group ... @end group forces ... to be all on one page. - -\def\group{\begingroup% \inENV ??? -\def \Egroup{\egroup\endgroup} -\vbox\bgroup} - -% @need space-in-mils -% forces a page break if there is not space-in-mils remaining. - -\newdimen\mil \mil=0.001in - -\def\need{\parsearg\needx} - -\def\needx #1{\par % -% This method tries to make TeX break the page naturally -% if the depth of the box does not fit. -{\baselineskip=0pt% -\vtop to #1\mil{\vfil}\kern -#1\mil\penalty 10000 -\prevdepth=-1000pt -}} - -% @br forces paragraph break - -\let\br = \par - -% @dots{} output some dots - -\def\dots{$\ldots$} - -% @page forces the start of a new page - -\def\page{\par\vfill\supereject} - -% @exdent text.... -% outputs text on separate line in roman font, starting at standard page margin - -\def\exdent{\errmessage{@exdent in filled text}} - % @lisp, etc, define \exdent locally from \internalexdent - -{\obeyspaces -\gdef\internalexdent{\parsearg\exdentzzz}} - -\def\exdentzzz #1{{\advance \leftskip by -\lispnarrowing -\advance \hsize by -\leftskip -\advance \hsize by -\rightskip -\leftline{{\rm#1}}}} - -% @include file insert text of that file as input. - -\def\include{\parsearg\includezzz} -\def\includezzz #1{{\def\thisfile{#1}\input #1 -}} - -\def\thisfile{} - -% @center line outputs that line, centered - -\def\center{\parsearg\centerzzz} -\def\centerzzz #1{{\advance\hsize by -\leftskip -\advance\hsize by -\rightskip -\centerline{#1}}} - -% @sp n outputs n lines of vertical space - -\def\sp{\parsearg\spxxx} -\def\spxxx #1{\par \vskip #1\baselineskip} - -% @comment ...line which is ignored... -% @c is the same as @comment -% @ignore ... @end ignore is another way to write a comment - -\def\comment{\catcode 64=\other \catcode 123=\other \catcode 125=\other% -\parsearg \commentxxx} - -\def\commentxxx #1{\catcode 64=0 \catcode 123=1 \catcode 125=2 } - -\let\c=\comment - -% Prevent errors for section commands. -% Used in @ignore and in failing conditionals. -\def\ignoresections{% -\let\chapter=\relax -\let\unnumbered=\relax -\let\top=\relax -\let\unnumberedsec=\relax -\let\unnumberedsection=\relax -\let\unnumberedsubsec=\relax -\let\unnumberedsubsection=\relax -\let\unnumberedsubsubsec=\relax -\let\unnumberedsubsubsection=\relax -\let\section=\relax -\let\subsec=\relax -\let\subsubsec=\relax -\let\subsection=\relax -\let\subsubsection=\relax -\let\appendix=\relax -\let\appendixsec=\relax -\let\appendixsection=\relax -\let\appendixsubsec=\relax -\let\appendixsubsection=\relax -\let\appendixsubsubsec=\relax -\let\appendixsubsubsection=\relax -\let\contents=\relax -\let\smallbook=\relax -\let\titlepage=\relax -} - -\def\ignore{\begingroup\ignoresections -% Make sure that spaces turn into tokens that match what \ignorexxx wants. -\catcode32=10 -\ignorexxx} -\long\def\ignorexxx #1\end ignore{\endgroup\ignorespaces} - -\def\direntry{\begingroup\direntryxxx} -\long\def\direntryxxx #1\end direntry{\endgroup\ignorespaces} - -% Conditionals to test whether a flag is set. - -\outer\def\ifset{\begingroup\ignoresections\parsearg\ifsetxxx} - -\def\ifsetxxx #1{\endgroup -\expandafter\ifx\csname IF#1\endcsname\relax \let\temp=\ifsetfail -\else \let\temp=\relax \fi -\temp} -\def\Eifset{} -\def\ifsetfail{\begingroup\ignoresections\ifsetfailxxx} -\long\def\ifsetfailxxx #1\end ifset{\endgroup\ignorespaces} - -\outer\def\ifclear{\begingroup\ignoresections\parsearg\ifclearxxx} - -\def\ifclearxxx #1{\endgroup -\expandafter\ifx\csname IF#1\endcsname\relax \let\temp=\relax -\else \let\temp=\ifclearfail \fi -\temp} -\def\Eifclear{} -\def\ifclearfail{\begingroup\ignoresections\ifclearfailxxx} -\long\def\ifclearfailxxx #1\end ifclear{\endgroup\ignorespaces} - -% Some texinfo constructs that are trivial in tex - -\def\iftex{} -\def\Eiftex{} -\def\ifinfo{\begingroup\ignoresections\ifinfoxxx} -\long\def\ifinfoxxx #1\end ifinfo{\endgroup\ignorespaces} - -\long\def\menu #1\end menu{} -\def\asis#1{#1} - -% @math means output in math mode. -% We don't use $'s directly in the definition of \math because control -% sequences like \math are expanded when the toc file is written. Then, -% we read the toc file back, the $'s will be normal characters (as they -% should be, according to the definition of Texinfo). So we must use a -% control sequence to switch into and out of math mode. -% -% This isn't quite enough for @math to work properly in indices, but it -% seems unlikely it will ever be needed there. -% -\let\implicitmath = $ -\def\math#1{\implicitmath #1\implicitmath} - -\def\node{\ENVcheck\parsearg\nodezzz} -\def\nodezzz#1{\nodexxx [#1,]} -\def\nodexxx[#1,#2]{\gdef\lastnode{#1}} -\let\lastnode=\relax - -\def\donoderef{\ifx\lastnode\relax\else -\expandafter\expandafter\expandafter\setref{\lastnode}\fi -\let\lastnode=\relax} - -\def\unnumbnoderef{\ifx\lastnode\relax\else -\expandafter\expandafter\expandafter\unnumbsetref{\lastnode}\fi -\let\lastnode=\relax} - -\def\appendixnoderef{\ifx\lastnode\relax\else -\expandafter\expandafter\expandafter\appendixsetref{\lastnode}\fi -\let\lastnode=\relax} - -\let\refill=\relax - -% @setfilename is done at the beginning of every texinfo file. -% So open here the files we need to have open while reading the input. -% This makes it possible to make a .fmt file for texinfo. -\def\setfilename{% - \readauxfile - \opencontents - \openindices - \fixbackslash % Turn off hack to swallow `\input texinfo'. - \global\let\setfilename=\comment % Ignore extra @setfilename cmds. - \comment % Ignore the actual filename. -} - -\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend} - -\def\inforef #1{\inforefzzz #1,,,,**} -\def\inforefzzz #1,#2,#3,#4**{See Info file \file{\losespace#3{}}, - node \samp{\losespace#1{}}} -\def\losespace #1{#1} - -\message{fonts,} - -% Font-change commands. - -% Texinfo supports the sans serif font style, which plain TeX does not. -% So we set up a \sf analogous to plain's \rm, etc. -\newfam\sffam -\def\sf{\fam=\sffam \tensf} -\let\li = \sf % Sometimes we call it \li, not \sf. - -%% Try out Computer Modern fonts at \magstephalf -\font\textrm=cmr10 scaled \magstephalf -\font\texttt=cmtt10 scaled \magstephalf -% Instead of cmb10, you many want to use cmbx10. -% cmbx10 is a prettier font on its own, but cmb10 -% looks better when embedded in a line with cmr10. -\font\textbf=cmb10 scaled \magstephalf -\font\textit=cmti10 scaled \magstephalf -\font\textsl=cmsl10 scaled \magstephalf -\font\textsf=cmss10 scaled \magstephalf -\font\textsc=cmcsc10 scaled \magstephalf -\font\texti=cmmi10 scaled \magstephalf -\font\textsy=cmsy10 scaled \magstephalf - -% A few fonts for @defun, etc. -\font\defbf=cmbx10 scaled \magstep1 %was 1314 -\font\deftt=cmtt10 scaled \magstep1 -\def\df{\let\tentt=\deftt \let\tenbf = \defbf \bf} - -% Fonts for indices and small examples. -% We actually use the slanted font rather than the italic, -% because texinfo normally uses the slanted fonts for that. -% Do not make many font distinctions in general in the index, since they -% aren't very useful. -\font\ninett=cmtt9 -\font\indrm=cmr9 -\font\indit=cmsl9 -\let\indsl=\indit -\let\indtt=\ninett -\let\indsf=\indrm -\let\indbf=\indrm -\let\indsc=\indrm -\font\indi=cmmi9 -\font\indsy=cmsy9 - -% Fonts for headings -\font\chaprm=cmbx12 scaled \magstep2 -\font\chapit=cmti12 scaled \magstep2 -\font\chapsl=cmsl12 scaled \magstep2 -\font\chaptt=cmtt12 scaled \magstep2 -\font\chapsf=cmss12 scaled \magstep2 -\let\chapbf=\chaprm -\font\chapsc=cmcsc10 scaled\magstep3 -\font\chapi=cmmi12 scaled \magstep2 -\font\chapsy=cmsy10 scaled \magstep3 - -\font\secrm=cmbx12 scaled \magstep1 -\font\secit=cmti12 scaled \magstep1 -\font\secsl=cmsl12 scaled \magstep1 -\font\sectt=cmtt12 scaled \magstep1 -\font\secsf=cmss12 scaled \magstep1 -\font\secbf=cmbx12 scaled \magstep1 -\font\secsc=cmcsc10 scaled\magstep2 -\font\seci=cmmi12 scaled \magstep1 -\font\secsy=cmsy10 scaled \magstep2 - -% \font\ssecrm=cmbx10 scaled \magstep1 % This size an font looked bad. -% \font\ssecit=cmti10 scaled \magstep1 % The letters were too crowded. -% \font\ssecsl=cmsl10 scaled \magstep1 -% \font\ssectt=cmtt10 scaled \magstep1 -% \font\ssecsf=cmss10 scaled \magstep1 - -%\font\ssecrm=cmb10 scaled 1315 % Note the use of cmb rather than cmbx. -%\font\ssecit=cmti10 scaled 1315 % Also, the size is a little larger than -%\font\ssecsl=cmsl10 scaled 1315 % being scaled magstep1. -%\font\ssectt=cmtt10 scaled 1315 -%\font\ssecsf=cmss10 scaled 1315 - -%\let\ssecbf=\ssecrm - -\font\ssecrm=cmbx12 scaled \magstephalf -\font\ssecit=cmti12 scaled \magstephalf -\font\ssecsl=cmsl12 scaled \magstephalf -\font\ssectt=cmtt12 scaled \magstephalf -\font\ssecsf=cmss12 scaled \magstephalf -\font\ssecbf=cmbx12 scaled \magstephalf -\font\ssecsc=cmcsc10 scaled \magstep1 -\font\sseci=cmmi12 scaled \magstephalf -\font\ssecsy=cmsy10 scaled \magstep1 -% The smallcaps and symbol fonts should actually be scaled \magstep1.5, -% but that is not a standard magnification. - -% Fonts for title page: -\font\titlerm = cmbx12 scaled \magstep3 -\let\authorrm = \secrm - -% In order for the font changes to affect most math symbols and letters, -% we have to define the \textfont of the standard families. Since -% texinfo doesn't allow for producing subscripts and superscripts, we -% don't bother to reset \scriptfont and \scriptscriptfont (which would -% also require loading a lot more fonts). -% -\def\resetmathfonts{% - \textfont0 = \tenrm \textfont1 = \teni \textfont2 = \tensy - \textfont\itfam = \tenit \textfont\slfam = \tensl \textfont\bffam = \tenbf - \textfont\ttfam = \tentt \textfont\sffam = \tensf -} - - -% The font-changing commands redefine the meanings of \tenSTYLE, instead -% of just \STYLE. We do this so that font changes will continue to work -% in math mode, where it is the current \fam that is relevant in most -% cases, not the current. Plain TeX does, for example, -% \def\bf{\fam=\bffam \tenbf} By redefining \tenbf, we obviate the need -% to redefine \bf itself. -\def\textfonts{% - \let\tenrm=\textrm \let\tenit=\textit \let\tensl=\textsl - \let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc - \let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy - \resetmathfonts} -\def\chapfonts{% - \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl - \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc - \let\tensf=\chapsf \let\teni=\chapi \let\tensy=\chapsy - \resetmathfonts} -\def\secfonts{% - \let\tenrm=\secrm \let\tenit=\secit \let\tensl=\secsl - \let\tenbf=\secbf \let\tentt=\sectt \let\smallcaps=\sectt - \let\tensf=\secsf \let\teni=\seci \let\tensy=\secsy - \resetmathfonts} -\def\subsecfonts{% - \let\tenrm=\ssecrm \let\tenit=\ssecit \let\tensl=\ssecsl - \let\tenbf=\ssecbf \let\tentt=\ssectt \let\smallcaps=\ssecsc - \let\tensf=\ssecsf \let\teni=\sseci \let\tensy=\ssecsy - \resetmathfonts} -\def\indexfonts{% - \let\tenrm=\indrm \let\tenit=\tenit \let\tensl=\indsl - \let\tenbf=\indbf \let\tentt=\indtt \let\smallcaps=\indsc - \let\tensf=\indsf \let\teni=\indi \let\tensy=\indsy - \resetmathfonts} - -% Set up the default fonts, so we can use them for creating boxes. -% -\textfonts - -% Count depth in font-changes, for error checks -\newcount\fontdepth \fontdepth=0 - -% Fonts for short table of contents. -\font\shortcontrm=cmr12 -\font\shortcontbf=cmbx12 -\font\shortcontsl=cmsl12 - -%% Add scribe-like font environments, plus @l for inline lisp (usually sans -%% serif) and @ii for TeX italic - -% \smartitalic{ARG} outputs arg in italics, followed by an italic correction -% unless the following character is such as not to need one. -\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else\/\fi\fi\fi} -\def\smartitalic#1{{\sl #1}\futurelet\next\smartitalicx} - -\let\i=\smartitalic -\let\var=\smartitalic -\let\dfn=\smartitalic -\let\emph=\smartitalic -\let\cite=\smartitalic - -\def\b#1{{\bf #1}} -\let\strong=\b - -\def\t#1{{\tt \exhyphenpenalty=10000\rawbackslash \frenchspacing #1}\null} -\let\ttfont = \t -%\def\samp #1{`{\tt \rawbackslash \frenchspacing #1}'\null} -\def\samp #1{`\tclose{#1}'\null} -\def\key #1{{\tt \exhyphenpenalty=10000\uppercase{#1}}\null} -\def\ctrl #1{{\tt \rawbackslash \hat}#1} - -\let\file=\samp - -% @code is a modification of @t, -% which makes spaces the same size as normal in the surrounding text. -\newdimen\tclosesave -\newdimen\tcloserm -\def\tclose#1{{\rm \tcloserm=\fontdimen2\font \tt \tclosesave=\fontdimen2\font -\fontdimen2\font=\tcloserm -% prevent breaking lines at hyphens. -\exhyphenpenalty=10000 -\def\ {{\fontdimen2\font=\tclosesave{} }}% - \rawbackslash \frenchspacing #1\fontdimen2\font=\tclosesave}\null} -\let\code=\tclose -%\let\exp=\tclose %Was temporary - -% @kbd is like @code, except that if the argument is just one @key command, -% then @kbd has no effect. - -\def\xkey{\key} -\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}% -\ifx\one\xkey\ifx\threex\three \key{#2}% -\else\tclose{\look}\fi -\else\tclose{\look}\fi} - -% Typeset a dimension, e.g., `in' or `pt'. The only reason for the -% argument is to make the input look right: @dmn{pt} instead of -% @dmn{}pt. -% -\def\dmn#1{\thinspace #1} - -\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par} - -\def\l#1{{\li #1}\null} % - -\def\r#1{{\rm #1}} % roman font -% Use of \lowercase was suggested. -\def\sc#1{{\smallcaps#1}} % smallcaps font -\def\ii#1{{\it #1}} % italic font - -\message{page headings,} - -\newskip\titlepagetopglue \titlepagetopglue = 1.5in -\newskip\titlepagebottomglue \titlepagebottomglue = 2pc - -% First the title page. Must do @settitle before @titlepage. -\def\titlefont#1{{\titlerm #1}} - -\newtoks\realeverypar -\newif\ifseenauthor -\newif\iffinishedtitlepage - -\def\titlepage{\begingroup \parindent=0pt \textfonts - \let\subtitlerm=\tenrm -% I deinstalled the following change because \cmr12 is undefined. -% This change was not in the ChangeLog anyway. --rms. -% \let\subtitlerm=\cmr12 - \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines}% - % - \def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines}% - % - % Leave some space at the very top of the page. - \vglue\titlepagetopglue - % - % Now you can print the title using @title. - \def\title{\parsearg\titlezzz}% - \def\titlezzz##1{\leftline{\titlefont{##1}} - % print a rule at the page bottom also. - \finishedtitlepagefalse - \vskip4pt \hrule height 4pt \vskip4pt}% - % No rule at page bottom unless we print one at the top with @title. - \finishedtitlepagetrue - % - % Now you can put text using @subtitle. - \def\subtitle{\parsearg\subtitlezzz}% - \def\subtitlezzz##1{{\subtitlefont \rightline{##1}}}% - % - % @author should come last, but may come many times. - \def\author{\parsearg\authorzzz}% - \def\authorzzz##1{\ifseenauthor\else\vskip 0pt plus 1filll\seenauthortrue\fi - {\authorfont \leftline{##1}}}% - % - % Most title ``pages'' are actually two pages long, with space - % at the top of the second. We don't want the ragged left on the second. - \let\oldpage = \page - \def\page{% - \iffinishedtitlepage\else - \finishtitlepage - \fi - \oldpage - \let\page = \oldpage - \hbox{}}% -% \def\page{\oldpage \hbox{}} -} - -\def\Etitlepage{% - \iffinishedtitlepage\else - \finishtitlepage - \fi - % It is important to do the page break before ending the group, - % because the headline and footline are only empty inside the group. - % If we use the new definition of \page, we always get a blank page - % after the title page, which we certainly don't want. - \oldpage - \endgroup - \HEADINGSon -} - -\def\finishtitlepage{% - \vskip4pt \hrule height 2pt - \vskip\titlepagebottomglue - \finishedtitlepagetrue -} - -%%% Set up page headings and footings. - -\let\thispage=\folio - -\newtoks \evenheadline % Token sequence for heading line of even pages -\newtoks \oddheadline % Token sequence for heading line of odd pages -\newtoks \evenfootline % Token sequence for footing line of even pages -\newtoks \oddfootline % Token sequence for footing line of odd pages - -% Now make Tex use those variables -\headline={{\textfonts\rm \ifodd\pageno \the\oddheadline - \else \the\evenheadline \fi}} -\footline={{\textfonts\rm \ifodd\pageno \the\oddfootline - \else \the\evenfootline \fi}\HEADINGShook} -\let\HEADINGShook=\relax - -% Commands to set those variables. -% For example, this is what @headings on does -% @evenheading @thistitle|@thispage|@thischapter -% @oddheading @thischapter|@thispage|@thistitle -% @evenfooting @thisfile|| -% @oddfooting ||@thisfile - -\def\evenheading{\parsearg\evenheadingxxx} -\def\oddheading{\parsearg\oddheadingxxx} -\def\everyheading{\parsearg\everyheadingxxx} - -\def\evenfooting{\parsearg\evenfootingxxx} -\def\oddfooting{\parsearg\oddfootingxxx} -\def\everyfooting{\parsearg\everyfootingxxx} - -{\catcode`\@=0 % - -\gdef\evenheadingxxx #1{\evenheadingyyy #1@|@|@|@|\finish} -\gdef\evenheadingyyy #1@|#2@|#3@|#4\finish{% -\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} - -\gdef\oddheadingxxx #1{\oddheadingyyy #1@|@|@|@|\finish} -\gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{% -\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} - -\gdef\everyheadingxxx #1{\everyheadingyyy #1@|@|@|@|\finish} -\gdef\everyheadingyyy #1@|#2@|#3@|#4\finish{% -\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}} -\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} - -\gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish} -\gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{% -\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} - -\gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish} -\gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{% -\global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} - -\gdef\everyfootingxxx #1{\everyfootingyyy #1@|@|@|@|\finish} -\gdef\everyfootingyyy #1@|#2@|#3@|#4\finish{% -\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}} -\global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}} -% -}% unbind the catcode of @. - -% @headings double turns headings on for double-sided printing. -% @headings single turns headings on for single-sided printing. -% @headings off turns them off. -% @headings on same as @headings double, retained for compatibility. -% @headings after turns on double-sided headings after this page. -% @headings doubleafter turns on double-sided headings after this page. -% @headings singleafter turns on single-sided headings after this page. -% By default, they are off. - -\def\headings #1 {\csname HEADINGS#1\endcsname} - -\def\HEADINGSoff{ -\global\evenheadline={\hfil} \global\evenfootline={\hfil} -\global\oddheadline={\hfil} \global\oddfootline={\hfil}} -\HEADINGSoff -% When we turn headings on, set the page number to 1. -% For double-sided printing, put current file name in lower left corner, -% chapter name on inside top of right hand pages, document -% title on inside top of left hand pages, and page numbers on outside top -% edge of all pages. -\def\HEADINGSdouble{ -%\pagealignmacro -\global\pageno=1 -\global\evenfootline={\hfil} -\global\oddfootline={\hfil} -\global\evenheadline={\line{\folio\hfil\thistitle}} -\global\oddheadline={\line{\thischapter\hfil\folio}} -} -% For single-sided printing, chapter title goes across top left of page, -% page number on top right. -\def\HEADINGSsingle{ -%\pagealignmacro -\global\pageno=1 -\global\evenfootline={\hfil} -\global\oddfootline={\hfil} -\global\evenheadline={\line{\thischapter\hfil\folio}} -\global\oddheadline={\line{\thischapter\hfil\folio}} -} -\def\HEADINGSon{\HEADINGSdouble} - -\def\HEADINGSafter{\let\HEADINGShook=\HEADINGSdoublex} -\let\HEADINGSdoubleafter=\HEADINGSafter -\def\HEADINGSdoublex{% -\global\evenfootline={\hfil} -\global\oddfootline={\hfil} -\global\evenheadline={\line{\folio\hfil\thistitle}} -\global\oddheadline={\line{\thischapter\hfil\folio}} -} - -\def\HEADINGSsingleafter{\let\HEADINGShook=\HEADINGSsinglex} -\def\HEADINGSsinglex{% -\global\evenfootline={\hfil} -\global\oddfootline={\hfil} -\global\evenheadline={\line{\thischapter\hfil\folio}} -\global\oddheadline={\line{\thischapter\hfil\folio}} -} - -% Subroutines used in generating headings -% Produces Day Month Year style of output. -\def\today{\number\day\space -\ifcase\month\or -January\or February\or March\or April\or May\or June\or -July\or August\or September\or October\or November\or December\fi -\space\number\year} - -% Use this if you want the Month Day, Year style of output. -%\def\today{\ifcase\month\or -%January\or February\or March\or April\or May\or June\or -%July\or August\or September\or October\or November\or December\fi -%\space\number\day, \number\year} - -% @settitle line... specifies the title of the document, for headings -% It generates no output of its own - -\def\thistitle{No Title} -\def\settitle{\parsearg\settitlezzz} -\def\settitlezzz #1{\gdef\thistitle{#1}} - -\message{tables,} - -% @tabs -- simple alignment - -% These don't work. For one thing, \+ is defined as outer. -% So these macros cannot even be defined. - -%\def\tabs{\parsearg\tabszzz} -%\def\tabszzz #1{\settabs\+#1\cr} -%\def\tabline{\parsearg\tablinezzz} -%\def\tablinezzz #1{\+#1\cr} -%\def\&{&} - -% Tables -- @table, @ftable, @item(x), @kitem(x), @xitem(x). - -% default indentation of table text -\newdimen\tableindent \tableindent=.8in -% default indentation of @itemize and @enumerate text -\newdimen\itemindent \itemindent=.3in -% margin between end of table item and start of table text. -\newdimen\itemmargin \itemmargin=.1in - -% used internally for \itemindent minus \itemmargin -\newdimen\itemmax - -% Note @table and @ftable define @item, @itemx, etc., with these defs. -% They also define \itemindex -% to index the item name in whatever manner is desired (perhaps none). - -\def\internalBitem{\smallbreak \parsearg\itemzzz} -\def\internalBitemx{\par \parsearg\itemzzz} - -\def\internalBxitem "#1"{\def\xitemsubtopix{#1} \smallbreak \parsearg\xitemzzz} -\def\internalBxitemx "#1"{\def\xitemsubtopix{#1} \par \parsearg\xitemzzz} - -\def\internalBkitem{\smallbreak \parsearg\kitemzzz} -\def\internalBkitemx{\par \parsearg\kitemzzz} - -\def\kitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \lastfunction}}% - \itemzzz {#1}} - -\def\xitemzzz #1{\dosubind {kw}{\code{#1}}{for {\bf \xitemsubtopic}}% - \itemzzz {#1}} - -\def\itemzzz #1{\begingroup % -\advance \hsize by -\rightskip % -\advance \hsize by -\leftskip % -\setbox0=\hbox{\itemfont{#1}}% -\itemindex{#1}% -\parskip=0in % -\noindent % -\ifdim \wd0>\itemmax % -\vadjust{\penalty 10000}% -\hbox to \hsize{\hskip -\tableindent\box0\hss}\ % -\else % -\hbox to 0pt{\hskip -\tableindent\box0\hss}% -\fi % -\endgroup % -} - -\def\item{\errmessage{@item while not in a table}} -\def\itemx{\errmessage{@itemx while not in a table}} -\def\kitem{\errmessage{@kitem while not in a table}} -\def\kitemx{\errmessage{@kitemx while not in a table}} -\def\xitem{\errmessage{@xitem while not in a table}} -\def\xitemx{\errmessage{@xitemx while not in a table}} - -%% Contains a kludge to get @end[description] to work -\def\description{\tablez{\dontindex}{1}{}{}{}{}} - -\def\table{\begingroup\inENV\obeylines\obeyspaces\tablex} -{\obeylines\obeyspaces% -\gdef\tablex #1^^M{% -\tabley\dontindex#1 \endtabley}} - -\def\ftable{\begingroup\inENV\obeylines\obeyspaces\ftablex} -{\obeylines\obeyspaces% -\gdef\ftablex #1^^M{% -\tabley\fnitemindex#1 \endtabley -\def\Eftable{\endgraf\endgroup\afterenvbreak}% -\let\Etable=\relax}} - -\def\dontindex #1{} -\def\fnitemindex #1{\doind {fn}{\code{#1}}}% - -{\obeyspaces % -\gdef\tabley#1#2 #3 #4 #5 #6 #7\endtabley{\endgroup% -\tablez{#1}{#2}{#3}{#4}{#5}{#6}}} - -\def\tablez #1#2#3#4#5#6{% -\aboveenvbreak % -\begingroup % -\def\Edescription{\Etable}% Neccessary kludge. -\let\itemindex=#1% -\ifnum 0#3>0 \advance \leftskip by #3\mil \fi % -\ifnum 0#4>0 \tableindent=#4\mil \fi % -\ifnum 0#5>0 \advance \rightskip by #5\mil \fi % -\def\itemfont{#2}% -\itemmax=\tableindent % -\advance \itemmax by -\itemmargin % -\advance \leftskip by \tableindent % -\parindent = 0pt -\parskip = \smallskipamount -\ifdim \parskip=0pt \parskip=2pt \fi% -\def\Etable{\endgraf\endgroup\afterenvbreak}% -\let\item = \internalBitem % -\let\itemx = \internalBitemx % -\let\kitem = \internalBkitem % -\let\kitemx = \internalBkitemx % -\let\xitem = \internalBxitem % -\let\xitemx = \internalBxitemx % -} - -% This is the counter used by @enumerate, which is really @itemize - -\newcount \itemno - -\def\itemize{\parsearg\itemizezzz} - -\def\itemizezzz #1{\itemizey {#1}{\Eitemize}} - -\def\itemizey #1#2{% -\aboveenvbreak % -\begingroup % -\itemno = 0 % -\itemmax=\itemindent % -\advance \itemmax by -\itemmargin % -\advance \leftskip by \itemindent % -\parindent = 0pt -\parskip = \smallskipamount -\ifdim \parskip=0pt \parskip=2pt \fi% -\def#2{\endgraf\endgroup\afterenvbreak}% -\def\itemcontents{#1}% -\let\item=\itemizeitem} - -\def\bullet{$\ptexbullet$} -\def\minus{$-$} - -% Set sfcode to normal for the chars that usually have another value. -% These are `.?!:;,' -\def\frenchspacing{\sfcode46=1000 \sfcode63=1000 \sfcode33=1000 - \sfcode58=1000 \sfcode59=1000 \sfcode44=1000 } - -\def\enumerate{\itemizey{\the\itemno.}\Eenumerate\flushcr} - -\def\alphaenumerate{\itemizey{\ifcase\itemno\or -a\or b\or c\or d\or e\or f\or g\or h\or i\or j\or k\or l\or m\or n\or o\or -p\or q\or r\or s\or t\or u\or v\or w\or x\or y\or z\else -\errmessage{More than 26 items in @ecapitate; get a bigger alphabet.}\fi.}% -\Ealphaenumerate\flushcr} - -\def\capsenumerate{\itemizey{\ifcase\itemno\or -A\or B\or C\or D\or E\or F\or G\or H\or I\or J\or K\or L\or M\or N\or O\or -P\or Q\or R\or S\or T\or U\or V\or W\or X\or Y\or Z\else -\errmessage{More than 26 items in @capsenumerate; get a bigger alphabet.}\fi.}% -\Ecapsenumerate\flushcr} - -% Definition of @item while inside @itemize. - -\def\itemizeitem{% -\advance\itemno by 1 -{\let\par=\endgraf \smallbreak}% -\ifhmode \errmessage{\in hmode at itemizeitem}\fi -{\parskip=0in \hskip 0pt -\hbox to 0pt{\hss \itemcontents\hskip \itemmargin}% -\vadjust{\penalty 300}}% -\flushcr} - -\message{indexing,} -% Index generation facilities - -% Define \newwrite to be identical to plain tex's \newwrite -% except not \outer, so it can be used within \newindex. -{\catcode`\@=11 -\gdef\newwrite{\alloc@7\write\chardef\sixt@@n}} - -% \newindex {foo} defines an index named foo. -% It automatically defines \fooindex such that -% \fooindex ...rest of line... puts an entry in the index foo. -% It also defines \fooindfile to be the number of the output channel for -% the file that accumulates this index. The file's extension is foo. -% The name of an index should be no more than 2 characters long -% for the sake of vms. - -\def\newindex #1{ -\expandafter\newwrite \csname#1indfile\endcsname% Define number for output file -\openout \csname#1indfile\endcsname \jobname.#1 % Open the file -\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex -\noexpand\doindex {#1}} -} - -% @defindex foo == \newindex{foo} - -\def\defindex{\parsearg\newindex} - -% Define @defcodeindex, like @defindex except put all entries in @code. - -\def\newcodeindex #1{ -\expandafter\newwrite \csname#1indfile\endcsname% Define number for output file -\openout \csname#1indfile\endcsname \jobname.#1 % Open the file -\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex -\noexpand\docodeindex {#1}} -} - -\def\defcodeindex{\parsearg\newcodeindex} - -% @synindex foo bar makes index foo feed into index bar. -% Do this instead of @defindex foo if you don't want it as a separate index. -\def\synindex #1 #2 {% -\expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname -\expandafter\let\csname#1indfile\endcsname=\synindexfoo -\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex -\noexpand\doindex {#2}}% -} - -% @syncodeindex foo bar similar, but put all entries made for index foo -% inside @code. -\def\syncodeindex #1 #2 {% -\expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname -\expandafter\let\csname#1indfile\endcsname=\synindexfoo -\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex -\noexpand\docodeindex {#2}}% -} - -% Define \doindex, the driver for all \fooindex macros. -% Argument #1 is generated by the calling \fooindex macro, -% and it is "foo", the name of the index. - -% \doindex just uses \parsearg; it calls \doind for the actual work. -% This is because \doind is more useful to call from other macros. - -% There is also \dosubind {index}{topic}{subtopic} -% which makes an entry in a two-level index such as the operation index. - -\def\doindex#1{\edef\indexname{#1}\parsearg\singleindexer} -\def\singleindexer #1{\doind{\indexname}{#1}} - -% like the previous two, but they put @code around the argument. -\def\docodeindex#1{\edef\indexname{#1}\parsearg\singlecodeindexer} -\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}} - -\def\indexdummies{% -\def\_{{\realbackslash _}}% -\def\w{\realbackslash w }% -\def\bf{\realbackslash bf }% -\def\rm{\realbackslash rm }% -\def\sl{\realbackslash sl }% -\def\sf{\realbackslash sf}% -\def\tt{\realbackslash tt}% -\def\gtr{\realbackslash gtr}% -\def\less{\realbackslash less}% -\def\hat{\realbackslash hat}% -\def\char{\realbackslash char}% -\def\TeX{\realbackslash TeX}% -\def\dots{\realbackslash dots }% -\def\copyright{\realbackslash copyright }% -\def\tclose##1{\realbackslash tclose {##1}}% -\def\code##1{\realbackslash code {##1}}% -\def\samp##1{\realbackslash samp {##1}}% -\def\t##1{\realbackslash r {##1}}% -\def\r##1{\realbackslash r {##1}}% -\def\i##1{\realbackslash i {##1}}% -\def\b##1{\realbackslash b {##1}}% -\def\cite##1{\realbackslash cite {##1}}% -\def\key##1{\realbackslash key {##1}}% -\def\file##1{\realbackslash file {##1}}% -\def\var##1{\realbackslash var {##1}}% -\def\kbd##1{\realbackslash kbd {##1}}% -} - -% \indexnofonts no-ops all font-change commands. -% This is used when outputting the strings to sort the index by. -\def\indexdummyfont#1{#1} -\def\indexdummytex{TeX} -\def\indexdummydots{...} - -\def\indexnofonts{% -\let\w=\indexdummyfont -\let\t=\indexdummyfont -\let\r=\indexdummyfont -\let\i=\indexdummyfont -\let\b=\indexdummyfont -\let\emph=\indexdummyfont -\let\strong=\indexdummyfont -\let\cite=\indexdummyfont -\let\sc=\indexdummyfont -%Don't no-op \tt, since it isn't a user-level command -% and is used in the definitions of the active chars like <, >, |... -%\let\tt=\indexdummyfont -\let\tclose=\indexdummyfont -\let\code=\indexdummyfont -\let\file=\indexdummyfont -\let\samp=\indexdummyfont -\let\kbd=\indexdummyfont -\let\key=\indexdummyfont -\let\var=\indexdummyfont -\let\TeX=\indexdummytex -\let\dots=\indexdummydots -} - -% To define \realbackslash, we must make \ not be an escape. -% We must first make another character (@) an escape -% so we do not become unable to do a definition. - -{\catcode`\@=0 \catcode`\\=\other -@gdef@realbackslash{\}} - -\let\indexbackslash=0 %overridden during \printindex. - -\def\doind #1#2{% -{\count10=\lastpenalty % -{\indexdummies % Must do this here, since \bf, etc expand at this stage -\escapechar=`\\% -{\let\folio=0% Expand all macros now EXCEPT \folio -\def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now -% so it will be output as is; and it will print as backslash in the indx. -% -% Now process the index-string once, with all font commands turned off, -% to get the string to sort the index by. -{\indexnofonts -\xdef\temp1{#2}% -}% -% Now produce the complete index entry. We process the index-string again, -% this time with font commands expanded, to get what to print in the index. -\edef\temp{% -\write \csname#1indfile\endcsname{% -\realbackslash entry {\temp1}{\folio}{#2}}}% -\temp }% -}\penalty\count10}} - -\def\dosubind #1#2#3{% -{\count10=\lastpenalty % -{\indexdummies % Must do this here, since \bf, etc expand at this stage -\escapechar=`\\% -{\let\folio=0% -\def\rawbackslashxx{\indexbackslash}% -% -% Now process the index-string once, with all font commands turned off, -% to get the string to sort the index by. -{\indexnofonts -\xdef\temp1{#2 #3}% -}% -% Now produce the complete index entry. We process the index-string again, -% this time with font commands expanded, to get what to print in the index. -\edef\temp{% -\write \csname#1indfile\endcsname{% -\realbackslash entry {\temp1}{\folio}{#2}{#3}}}% -\temp }% -}\penalty\count10}} - -% The index entry written in the file actually looks like -% \entry {sortstring}{page}{topic} -% or -% \entry {sortstring}{page}{topic}{subtopic} -% The texindex program reads in these files and writes files -% containing these kinds of lines: -% \initial {c} -% before the first topic whose initial is c -% \entry {topic}{pagelist} -% for a topic that is used without subtopics -% \primary {topic} -% for the beginning of a topic that is used with subtopics -% \secondary {subtopic}{pagelist} -% for each subtopic. - -% Define the user-accessible indexing commands -% @findex, @vindex, @kindex, @cindex. - -\def\findex {\fnindex} -\def\kindex {\kyindex} -\def\cindex {\cpindex} -\def\vindex {\vrindex} -\def\tindex {\tpindex} -\def\pindex {\pgindex} - -\def\cindexsub {\begingroup\obeylines\cindexsub} -{\obeylines % -\gdef\cindexsub "#1" #2^^M{\endgroup % -\dosubind{cp}{#2}{#1}}} - -% Define the macros used in formatting output of the sorted index material. - -% This is what you call to cause a particular index to get printed. -% Write -% @unnumbered Function Index -% @printindex fn - -\def\printindex{\parsearg\doprintindex} - -\def\doprintindex#1{\tex % -\dobreak \chapheadingskip {10000} -\catcode`\%=\other\catcode`\&=\other\catcode`\#=\other -\catcode`\$=\other\catcode`\_=\other -\catcode`\~=\other -% The following don't help, since the chars were translated -% when the raw index was written, and their fonts were discarded -% due to \indexnofonts. -%\catcode`\"=\active -%\catcode`\^=\active -%\catcode`\_=\active -%\catcode`\|=\active -%\catcode`\<=\active -%\catcode`\>=\active -\def\indexbackslash{\rawbackslashxx} -\indexfonts\rm \tolerance=9500 \advance\baselineskip -1pt -\begindoublecolumns -\openin 1 \jobname.#1s -\ifeof 1 -% \enddoublecolumns gets confused if there is no text in the index, -% and it loses the chapter title and the aux file entries for the index. -% The easiest way to prevent this problem is to make sure there is some text. -(Index is empty) -\else \closein 1 \input \jobname.#1s -\fi -\enddoublecolumns -\Etex} - -% These macros are used by the sorted index file itself. -% Change them to control the appearance of the index. - -% Same as \bigskipamount except no shrink. -% \balancecolumns gets confused if there is any shrink. -\newskip\initialskipamount \initialskipamount 12pt plus4pt - -\outer\def\initial #1{% -{\let\tentt=\sectt \let\tt=\sectt \let\sf=\sectt -\ifdim\lastskip<\initialskipamount -\removelastskip \penalty-200 \vskip \initialskipamount\fi -\line{\secbf#1\hfill}\kern 2pt\penalty10000}} - -\outer\def\entry #1#2{ -{\parfillskip=0in \parskip=0in \parindent=0in -\hangindent=1in \hangafter=1% -\noindent\hbox{#1}\indexdotfill #2\par -}} - -% Like \dotfill except takes at least 1 em. -\def\indexdotfill{\cleaders - \hbox{$\mathsurround=0pt \mkern1.5mu . \mkern1.5mu$}\hskip 1em plus 1fill} - -\def\primary #1{\line{#1\hfil}} - -\newskip\secondaryindent \secondaryindent=0.5cm - -\def\secondary #1#2{ -{\parfillskip=0in \parskip=0in -\hangindent =1in \hangafter=1 -\noindent\hskip\secondaryindent\hbox{#1}\indexdotfill #2\par -}} - -%% Define two-column mode, which is used in indexes. -%% Adapted from the TeXBook, page 416 -\catcode `\@=11 - -\newbox\partialpage - -\newdimen\doublecolumnhsize \doublecolumnhsize = 3.11in -\newdimen\doublecolumnvsize \doublecolumnvsize = 19.1in -\newdimen\availdimen@ - -\def\begindoublecolumns{\begingroup - \output={\global\setbox\partialpage= - \vbox{\unvbox255\kern -\topskip \kern \baselineskip}}\eject - \output={\doublecolumnout}% - \hsize=\doublecolumnhsize \vsize=\doublecolumnvsize} -\def\enddoublecolumns{\output={\balancecolumns}\eject - \endgroup \pagegoal=\vsize} - -\def\doublecolumnout{\splittopskip=\topskip \splitmaxdepth=\maxdepth - \dimen@=\pageheight \advance\dimen@ by-\ht\partialpage - \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@ - \onepageout\pagesofar \unvbox255 \penalty\outputpenalty} -\def\pagesofar{\unvbox\partialpage % - \hsize=\doublecolumnhsize % have to restore this since output routine -% changes it to set cropmarks (P. A. MacKay, 12 Nov. 1986) - \wd0=\hsize \wd2=\hsize \hbox to\pagewidth{\box0\hfil\box2}} -\def\balancecolumns{% -% Unset the glue. - \setbox255=\vbox{\unvbox255} - \dimen@=\ht255 - \advance\dimen@ by\topskip \advance\dimen@ by-\baselineskip - \divide\dimen@ by2 - \availdimen@=\pageheight \advance\availdimen@ by-\ht\partialpage -% If the remaining data is too big for one page, -% output one page normally, then work with what remains. - \ifdim \dimen@>\availdimen@ - { - \splittopskip=\topskip \splitmaxdepth=\maxdepth - \dimen@=\pageheight \advance\dimen@ by-\ht\partialpage - \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@ - \onepageout\pagesofar - } -% Recompute size of what remains, in case we just output some of it. - \dimen@=\ht255 - \advance\dimen@ by\topskip \advance\dimen@ by-\baselineskip - \divide\dimen@ by2 - \fi - \setbox0=\vbox{\unvbox255} - \splittopskip=\topskip - {\vbadness=10000 \loop \global\setbox3=\copy0 - \global\setbox1=\vsplit3 to\dimen@ - \ifdim\ht3>\dimen@ \global\advance\dimen@ by1pt \repeat} - \setbox0=\vbox to\dimen@{\unvbox1} \setbox2=\vbox to\dimen@{\unvbox3} - \pagesofar} - -\catcode `\@=\other -\message{sectioning,} -% Define chapters, sections, etc. - -\newcount \chapno -\newcount \secno -\newcount \subsecno -\newcount \subsubsecno - -% This counter is funny since it counts through charcodes of letters A, B, ... -\newcount \appendixno \appendixno = `\@ -\def\appendixletter{\char\the\appendixno} - -\newwrite \contentsfile -% This is called from \setfilename. -\def\opencontents{\openout \contentsfile = \jobname.toc} - -% Each @chapter defines this as the name of the chapter. -% page headings and footings can use it. @section does likewise - -\def\thischapter{} \def\thissection{} -\def\seccheck#1{\if \pageno<0 % -\errmessage{@#1 not allowed after generating table of contents}\fi -% -} - -\def\chapternofonts{% -\let\rawbackslash=\relax% -\let\frenchspacing=\relax% -\def\TeX{\realbackslash TeX} -\def\dots{\realbackslash dots} -\def\copyright{\realbackslash copyright} -\def\tt{\realbackslash tt} -\def\bf{\realbackslash bf } -\def\w{\realbackslash w} -\def\less{\realbackslash less} -\def\gtr{\realbackslash gtr} -\def\hat{\realbackslash hat} -\def\char{\realbackslash char} -\def\tclose##1{\realbackslash tclose {##1}} -\def\code##1{\realbackslash code {##1}} -\def\samp##1{\realbackslash samp {##1}} -\def\r##1{\realbackslash r {##1}} -\def\b##1{\realbackslash b {##1}} -\def\key##1{\realbackslash key {##1}} -\def\file##1{\realbackslash file {##1}} -\def\kbd##1{\realbackslash kbd {##1}} -% These are redefined because @smartitalic wouldn't work inside xdef. -\def\i##1{\realbackslash i {##1}} -\def\cite##1{\realbackslash cite {##1}} -\def\var##1{\realbackslash var {##1}} -\def\emph##1{\realbackslash emph {##1}} -\def\dfn##1{\realbackslash dfn {##1}} -} - -\outer\def\chapter{\parsearg\chapterzzz} -\def\chapterzzz #1{\seccheck{chapter}% -\secno=0 \subsecno=0 \subsubsecno=0 -\global\advance \chapno by 1 \message{Chapter \the\chapno}% -\chapmacro {#1}{\the\chapno}% -\gdef\thissection{#1}% -\gdef\thischaptername{#1}% -% We don't substitute the actual chapter name into \thischapter -% because we don't want its macros evaluated now. -\xdef\thischapter{Chapter \the\chapno: \noexpand\thischaptername}% -{\chapternofonts% -\edef\temp{{\realbackslash chapentry {#1}{\the\chapno}{\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\donoderef % -\global\let\section = \numberedsection -}} - -\outer\def\appendix{\parsearg\appendixzzz} -\def\appendixzzz #1{\seccheck{appendix}% -\secno=0 \subsecno=0 \subsubsecno=0 -\global\advance \appendixno by 1 \message{Appendix \appendixletter}% -\chapmacro {#1}{Appendix \appendixletter}% -\gdef\thissection{#1}% -\gdef\thischaptername{#1}% -\xdef\thischapter{Appendix \appendixletter: \noexpand\thischaptername}% -{\chapternofonts% -\edef\temp{{\realbackslash chapentry - {#1}{Appendix \appendixletter}{\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\appendixnoderef % -\global\let\section = \appendixsec -}} - -\outer\def\top{\parsearg\unnumberedzzz} -\outer\def\unnumbered{\parsearg\unnumberedzzz} -\def\unnumberedzzz #1{\seccheck{unnumbered}% -\secno=0 \subsecno=0 \subsubsecno=0 \message{(#1)} -\unnumbchapmacro {#1}% -\gdef\thischapter{#1}\gdef\thissection{#1}% -{\chapternofonts% -\edef\temp{{\realbackslash unnumbchapentry {#1}{\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\unnumbnoderef % -\global\let\section = \unnumberedsec -}} - -\outer\def\numberedsection{\parsearg\sectionzzz} -\def\sectionzzz #1{\seccheck{section}% -\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 % -\gdef\thissection{#1}\secheading {#1}{\the\chapno}{\the\secno}% -{\chapternofonts% -\edef\temp{{\realbackslash secentry % -{#1}{\the\chapno}{\the\secno}{\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\donoderef % -\penalty 10000 % -\global\let\subsection = \numberedsubsection -}} - -\outer\def\appendixsection{\parsearg\appendixsectionzzz} -\outer\def\appendixsec{\parsearg\appendixsectionzzz} -\def\appendixsectionzzz #1{\seccheck{appendixsection}% -\subsecno=0 \subsubsecno=0 \global\advance \secno by 1 % -\gdef\thissection{#1}\secheading {#1}{\appendixletter}{\the\secno}% -{\chapternofonts% -\edef\temp{{\realbackslash secentry % -{#1}{\appendixletter}{\the\secno}{\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\appendixnoderef % -\penalty 10000 % -\global\let\subsection = \appendixsubsec -}} - -\outer\def\unnumberedsec{\parsearg\unnumberedseczzz} -\def\unnumberedseczzz #1{\seccheck{unnumberedsec}% -\plainsecheading {#1}\gdef\thissection{#1}% -{\chapternofonts% -\edef\temp{{\realbackslash unnumbsecentry{#1}{\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\unnumbnoderef % -\penalty 10000 % -\global\let\subsection = \unnumberedsubsec -}} - -\outer\def\numberedsubsection{\parsearg\subsectionzzz} -\def\subsectionzzz #1{\seccheck{subsection}% -\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 % -\subsecheading {#1}{\the\chapno}{\the\secno}{\the\subsecno}% -{\chapternofonts% -\edef\temp{{\realbackslash subsecentry % -{#1}{\the\chapno}{\the\secno}{\the\subsecno}{\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\donoderef % -\penalty 10000 % -\global\let\subsubsection = \numberedsubsubsection -}} - -\outer\def\appendixsubsec{\parsearg\appendixsubseczzz} -\def\appendixsubseczzz #1{\seccheck{appendixsubsec}% -\gdef\thissection{#1}\subsubsecno=0 \global\advance \subsecno by 1 % -\subsecheading {#1}{\appendixletter}{\the\secno}{\the\subsecno}% -{\chapternofonts% -\edef\temp{{\realbackslash subsecentry % -{#1}{\appendixletter}{\the\secno}{\the\subsecno}{\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\appendixnoderef % -\penalty 10000 % -\global\let\subsubsection = \appendixsubsubsec -}} - -\outer\def\unnumberedsubsec{\parsearg\unnumberedsubseczzz} -\def\unnumberedsubseczzz #1{\seccheck{unnumberedsubsec}% -\plainsecheading {#1}\gdef\thissection{#1}% -{\chapternofonts% -\edef\temp{{\realbackslash unnumbsubsecentry{#1}{\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\unnumbnoderef % -\penalty 10000 % -\global\let\subsubsection = \unnumberedsubsubsec -}} - -\outer\def\numberedsubsubsection{\parsearg\subsubsectionzzz} -\def\subsubsectionzzz #1{\seccheck{subsubsection}% -\gdef\thissection{#1}\global\advance \subsubsecno by 1 % -\subsubsecheading {#1} - {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}% -{\chapternofonts% -\edef\temp{{\realbackslash subsubsecentry % - {#1} - {\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno} - {\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\donoderef % -\penalty 10000 % -}} - -\outer\def\appendixsubsubsec{\parsearg\appendixsubsubseczzz} -\def\appendixsubsubseczzz #1{\seccheck{appendixsubsubsec}% -\gdef\thissection{#1}\global\advance \subsubsecno by 1 % -\subsubsecheading {#1} - {\appendixletter}{\the\secno}{\the\subsecno}{\the\subsubsecno}% -{\chapternofonts% -\edef\temp{{\realbackslash subsubsecentry{#1}% - {\appendixletter} - {\the\secno}{\the\subsecno}{\the\subsubsecno}{\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\appendixnoderef % -\penalty 10000 % -}} - -\outer\def\unnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz} -\def\unnumberedsubsubseczzz #1{\seccheck{unnumberedsubsubsec}% -\plainsecheading {#1}\gdef\thissection{#1}% -{\chapternofonts% -\edef\temp{{\realbackslash unnumbsubsubsecentry{#1}{\noexpand\folio}}}% -\escapechar=`\\% -\write \contentsfile \temp % -\unnumbnoderef % -\penalty 10000 % -}} - -% These are variants which are not "outer", so they can appear in @ifinfo. -\def\infotop{\parsearg\unnumberedzzz} -\def\infounnumbered{\parsearg\unnumberedzzz} -\def\infounnumberedsec{\parsearg\unnumberedseczzz} -\def\infounnumberedsubsec{\parsearg\unnumberedsubseczzz} -\def\infounnumberedsubsubsec{\parsearg\unnumberedsubsubseczzz} - -\def\infoappendix{\parsearg\appendixzzz} -\def\infoappendixsec{\parsearg\appendixseczzz} -\def\infoappendixsubsec{\parsearg\appendixsubseczzz} -\def\infoappendixsubsubsec{\parsearg\appendixsubsubseczzz} - -\def\infochapter{\parsearg\chapterzzz} -\def\infosection{\parsearg\sectionzzz} -\def\infosubsection{\parsearg\subsectionzzz} -\def\infosubsubsection{\parsearg\subsubsectionzzz} - -% Define @majorheading, @heading and @subheading - -\def\majorheading{\parsearg\majorheadingzzz} -\def\majorheadingzzz #1{% -{\advance\chapheadingskip by 10pt \chapbreak }% -{\chapfonts \line{\rm #1\hfill}}\bigskip \par\penalty 200} - -\def\chapheading{\parsearg\chapheadingzzz} -\def\chapheadingzzz #1{\chapbreak % -{\chapfonts \line{\rm #1\hfill}}\bigskip \par\penalty 200} - -\def\heading{\parsearg\secheadingi} - -\def\subheading{\parsearg\subsecheadingi} - -\def\subsubheading{\parsearg\subsubsecheadingi} - -% These macros generate a chapter, section, etc. heading only -% (including whitespace, linebreaking, etc. around it), -% given all the information in convenient, parsed form. - -%%% Args are the skip and penalty (usually negative) -\def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi} - -\def\setchapterstyle #1 {\csname CHAPF#1\endcsname} - -%%% Define plain chapter starts, and page on/off switching for it -% Parameter controlling skip before chapter headings (if needed) - -\newskip \chapheadingskip \chapheadingskip = 30pt plus 8pt minus 4pt - -\def\chapbreak{\dobreak \chapheadingskip {-4000}} -\def\chappager{\par\vfill\supereject} -\def\chapoddpage{\chappager \ifodd\pageno \else \hbox to 0pt{} \chappager\fi} - -\def\setchapternewpage #1 {\csname CHAPPAG#1\endcsname} - -\def\CHAPPAGoff{ -\global\let\pchapsepmacro=\chapbreak -\global\let\pagealignmacro=\chappager} - -\def\CHAPPAGon{ -\global\let\pchapsepmacro=\chappager -\global\let\pagealignmacro=\chappager -\global\def\HEADINGSon{\HEADINGSsingle}} - -\def\CHAPPAGodd{ -\global\let\pchapsepmacro=\chapoddpage -\global\let\pagealignmacro=\chapoddpage -\global\def\HEADINGSon{\HEADINGSdouble}} - -\CHAPPAGon - -\def\CHAPFplain{ -\global\let\chapmacro=\chfplain -\global\let\unnumbchapmacro=\unnchfplain} - -\def\chfplain #1#2{% - \pchapsepmacro - {% - \chapfonts - \leftline{\rm #2\enspace #1}% - }% - \bigskip - \penalty5000 -} - -\def\unnchfplain #1{% -\pchapsepmacro % -{\chapfonts \line{\rm #1\hfill}}\bigskip \par\penalty 10000 % -} -\CHAPFplain % The default - -\def\unnchfopen #1{% -\chapoddpage {\chapfonts \line{\rm #1\hfill}}\bigskip \par\penalty 10000 % -} - -\def\chfopen #1#2{\chapoddpage {\chapfonts -\vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}% -\par\penalty 5000 % -} - -\def\CHAPFopen{ -\global\let\chapmacro=\chfopen -\global\let\unnumbchapmacro=\unnchfopen} - -% Parameter controlling skip before section headings. - -\newskip \subsecheadingskip \subsecheadingskip = 17pt plus 8pt minus 4pt -\def\subsecheadingbreak{\dobreak \subsecheadingskip {-500}} - -\newskip \secheadingskip \secheadingskip = 21pt plus 8pt minus 4pt -\def\secheadingbreak{\dobreak \secheadingskip {-1000}} - - -% Section fonts are the base font at magstep2, which produces -% a size a bit more than 14 points in the default situation. - -\def\secheading #1#2#3{\secheadingi {#2.#3\enspace #1}} -\def\plainsecheading #1{\secheadingi {#1}} -\def\secheadingi #1{{\advance \secheadingskip by \parskip % -\secheadingbreak}% -{\secfonts \line{\rm #1\hfill}}% -\ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000 } - - -% Subsection fonts are the base font at magstep1, -% which produces a size of 12 points. - -\def\subsecheading #1#2#3#4{\subsecheadingi {#2.#3.#4\enspace #1}} -\def\subsecheadingi #1{{\advance \subsecheadingskip by \parskip % -\subsecheadingbreak}% -{\subsecfonts \line{\rm #1\hfill}}% -\ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000 } - -\def\subsubsecfonts{\subsecfonts} % Maybe this should change: - % Perhaps make sssec fonts scaled - % magstep half -\def\subsubsecheading #1#2#3#4#5{\subsubsecheadingi {#2.#3.#4.#5\enspace #1}} -\def\subsubsecheadingi #1{{\advance \subsecheadingskip by \parskip % -\subsecheadingbreak}% -{\subsubsecfonts \line{\rm #1\hfill}}% -\ifdim \parskip<10pt \kern 10pt\kern -\parskip\fi \penalty 10000} - - -\message{toc printing,} - -% Finish up the main text and prepare to read what we've written -% to \contentsfile. - -\def\startcontents#1{% - \ifnum \pageno>0 - \pagealignmacro - \immediate\closeout \contentsfile - \pageno = -1 % Request roman numbered pages. - \fi - % Don't need to put `Contents' or `Short Contents' in the headline. - % It is abundantly clear what they are. - \unnumbchapmacro{#1}\def\thischapter{}% - \begingroup % Set up to handle contents files properly. - \catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11 - \raggedbottom % Worry more about breakpoints than the bottom. - \advance\hsize by -1in % Don't use the full line length. -} - - -% Normal (long) toc. -\outer\def\contents{% - \startcontents{Table of Contents}% - \input \jobname.toc - \endgroup - \vfill \eject -} - -% And just the chapters. -\outer\def\summarycontents{% - \startcontents{Short Contents}% - % - \let\chapentry = \shortchapentry - \let\unnumbchapentry = \shortunnumberedentry - % We want a true roman here for the page numbers. - \secfonts - \let\rm=\shortcontrm \let\bf=\shortcontbf \let\sl=\shortcontsl - \rm - \advance\baselineskip by 1pt % Open it up a little. - \def\secentry ##1##2##3##4{} - \def\unnumbsecentry ##1##2{} - \def\subsecentry ##1##2##3##4##5{} - \def\unnumbsubsecentry ##1##2{} - \def\subsubsecentry ##1##2##3##4##5##6{} - \def\unnumbsubsubsecentry ##1##2{} - \input \jobname.toc - \endgroup - \vfill \eject -} -\let\shortcontents = \summarycontents - -% These macros generate individual entries in the table of contents. -% The first argument is the chapter or section name. -% The last argument is the page number. -% The arguments in between are the chapter number, section number, ... - -% Chapter-level things, for both the long and short contents. -\def\chapentry#1#2#3{\dochapentry{#2\labelspace#1}{#3}} -\def\shortchapentry#1#2#3{% - \line{{#2\labelspace #1}\dotfill\doshortpageno{#3}}% -} - -\def\unnumbchapentry#1#2{\dochapentry{#1}{#2}} -\def\shortunnumberedentry#1#2{% - \line{#1\dotfill\doshortpageno{#2}}% -} - -% Sections. -\def\secentry#1#2#3#4{\dosecentry{#2.#3\labelspace#1}{#4}} -\def\unnumbsecentry#1#2{\dosecentry{#1}{#2}} - -% Subsections. -\def\subsecentry#1#2#3#4#5{\dosubsecentry{#2.#3.#4\labelspace#1}{#5}} -\def\unnumbsubsecentry#1#2{\dosubsecentry{#1}{#2}} - -% And subsubsections. -\def\subsubsecentry#1#2#3#4#5#6{% - \dosubsubsecentry{#2.#3.#4.#5\labelspace#1}{#6}} -\def\unnumbsubsubsecentry#1#2{\dosubsubsecentry{#1}{#2}} - - -% This parameter controls the indentation of the various levels. -\newdimen\tocindent \tocindent = 3pc - -% Now for the actual typesetting. In all these, #1 is the text and #2 is the -% page number. -% -% If the toc has to be broken over pages, we would want to be at chapters -% if at all possible; hence the \penalty. -\def\dochapentry#1#2{% - \penalty-300 \vskip\baselineskip - \line{\chapentryfonts #1\dotfill \dopageno{#2}}% - \nobreak\vskip .25\baselineskip -} - -\def\dosecentry#1#2{% - \line{\secentryfonts \hskip\tocindent #1\dotfill \dopageno{#2}}% -} - -\def\dosubsecentry#1#2{% - \line{\subsecentryfonts \hskip2\tocindent #1\dotfill \dopageno{#2}}% -} - -\def\dosubsubsecentry#1#2{% - \line{\subsubsecentryfonts \hskip3\tocindent #1\dotfill \dopageno{#2}}% -} - -% Space between chapter (or whatever) number and the title. -\def\labelspace{\hskip1em \relax} - -\def\dopageno#1{{\rm #1}} -\def\doshortpageno#1{{\rm #1}} - -\def\chapentryfonts{\secfonts \rm} -\def\secentryfonts{\textfonts} -\let\subsecentryfonts = \textfonts -\let\subsubsecentryfonts = \textfonts - - -\message{environments,} - -% Since these characters are used in examples, it should be an even number of -% \tt widths. Each \tt character is 1en, so two makes it 1em. -% Furthermore, these definitions must come after we define our fonts. -\newbox\dblarrowbox \newbox\longdblarrowbox -\newbox\pushcharbox \newbox\bullbox -\newbox\equivbox \newbox\errorbox - -\let\ptexequiv = \equiv - -{\tentt -\global\setbox\dblarrowbox = \hbox to 1em{\hfil$\Rightarrow$\hfil} -\global\setbox\longdblarrowbox = \hbox to 1em{\hfil$\mapsto$\hfil} -\global\setbox\pushcharbox = \hbox to 1em{\hfil$\dashv$\hfil} -\global\setbox\equivbox = \hbox to 1em{\hfil$\ptexequiv$\hfil} -% Adapted from the manmac format (p.420 of TeXbook) -\global\setbox\bullbox = \hbox to 1em{\kern.15em\vrule height .75ex width .85ex - depth .1ex\hfil} -} - -\def\point{$\star$} - -\def\result{\leavevmode\raise.15ex\copy\dblarrowbox} -\def\expansion{\leavevmode\raise.1ex\copy\longdblarrowbox} -\def\print{\leavevmode\lower.1ex\copy\pushcharbox} - -\def\equiv{\leavevmode\lower.1ex\copy\equivbox} - -% Does anyone really want this? -% \def\bull{\leavevmode\copy\bullbox} - -% Adapted from the TeXbook's \boxit. -{\tentt \global\dimen0 = 3em}% Width of the box. -\dimen2 = .55pt % Thickness of rules -% The text. (`r' is open on the right, `e' somewhat less so on the left.) -\setbox0 = \hbox{\kern-.75pt \tensf error\kern-1.5pt} - -\global\setbox\errorbox=\hbox to \dimen0{\hfil - \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right. - \advance\hsize by -2\dimen2 % Rules. - \vbox{ - \hrule height\dimen2 - \hbox{\vrule width\dimen2 \kern3pt % Space to left of text. - \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below. - \kern3pt\vrule width\dimen2}% Space to right. - \hrule height\dimen2} - \hfil} - -% The @error{} command. -\def\error{\leavevmode\lower.7ex\copy\errorbox} - -% @tex ... @end tex escapes into raw Tex temporarily. -% One exception: @ is still an escape character, so that @end tex works. -% But \@ or @@ will get a plain tex @ character. - -\def\tex{\begingroup -\catcode `\\=0 \catcode `\{=1 \catcode `\}=2 -\catcode `\$=3 \catcode `\&=4 \catcode `\#=6 -\catcode `\^=7 \catcode `\_=8 \catcode `\~=13 \let~=\tie -\catcode `\%=14 -\catcode 43=12 -\catcode`\"=12 -\catcode`\==12 -\catcode`\|=12 -\catcode`\<=12 -\catcode`\>=12 -\escapechar=`\\ -% -\let\{=\ptexlbrace -\let\}=\ptexrbrace -\let\.=\ptexdot -\let\*=\ptexstar -\let\dots=\ptexdots -\def\@{@}% -\let\bullet=\ptexbullet -\let\b=\ptexb \let\c=\ptexc \let\i=\ptexi \let\t=\ptext \let\l=\ptexl -\let\L=\ptexL -% -\let\Etex=\endgroup} - -% Define @lisp ... @endlisp. -% @lisp does a \begingroup so it can rebind things, -% including the definition of @endlisp (which normally is erroneous). - -% Amount to narrow the margins by for @lisp. -\newskip\lispnarrowing \lispnarrowing=0.4in - -% This is the definition that ^M gets inside @lisp -% phr: changed space to \null, to avoid overfull hbox problems. -{\obeyspaces% -\gdef\lisppar{\null\endgraf}} - -% Cause \obeyspaces to make each Space cause a word-separation -% rather than the default which is that it acts punctuation. -% This is because space in tt font looks funny. -{\obeyspaces % -\gdef\sepspaces{\def {\ }}} - -\newskip\aboveenvskipamount \aboveenvskipamount= 0pt -\def\aboveenvbreak{{\advance\aboveenvskipamount by \parskip -\endgraf \ifdim\lastskip<\aboveenvskipamount -\removelastskip \penalty-50 \vskip\aboveenvskipamount \fi}} - -\def\afterenvbreak{\endgraf \ifdim\lastskip<\aboveenvskipamount -\removelastskip \penalty-50 \vskip\aboveenvskipamount \fi} - -\def\lisp{\aboveenvbreak -\begingroup\inENV % This group ends at the end of the @lisp body -\hfuzz=12truept % Don't be fussy -% Make spaces be word-separators rather than space tokens. -\sepspaces % -% Single space lines -\singlespace % -% The following causes blank lines not to be ignored -% by adding a space to the end of each line. -\let\par=\lisppar -\def\Elisp{\endgroup\afterenvbreak}% -\parskip=0pt -\advance \leftskip by \lispnarrowing -\parindent=0pt -\let\exdent=\internalexdent -\obeyspaces \obeylines \tt \rawbackslash -\def\next##1{}\next} - - -\let\example=\lisp -\def\Eexample{\Elisp} - -\let\smallexample=\lisp -\def\Esmallexample{\Elisp} - -% Macro for 9 pt. examples, necessary to print with 5" lines. -% From Pavel@xerox. This is not really used unless the -% @smallbook command is given. - -\def\smalllispx{\aboveenvbreak\begingroup\inENV -% This group ends at the end of the @lisp body -\hfuzz=12truept % Don't be fussy -% Make spaces be word-separators rather than space tokens. -\sepspaces % -% Single space lines -\singlespace % -% The following causes blank lines not to be ignored -% by adding a space to the end of each line. -\let\par=\lisppar -\def\Esmalllisp{\endgroup\afterenvbreak}% -\parskip=0pt -\advance \leftskip by \lispnarrowing -\parindent=0pt -\let\exdent=\internalexdent -\obeyspaces \obeylines \ninett \indexfonts \rawbackslash -\def\next##1{}\next} - -% This is @display; same as @lisp except use roman font. - -\def\display{\begingroup\inENV %This group ends at the end of the @display body -\aboveenvbreak -% Make spaces be word-separators rather than space tokens. -\sepspaces % -% Single space lines -\singlespace % -% The following causes blank lines not to be ignored -% by adding a space to the end of each line. -\let\par=\lisppar -\def\Edisplay{\endgroup\afterenvbreak}% -\parskip=0pt -\advance \leftskip by \lispnarrowing -\parindent=0pt -\let\exdent=\internalexdent -\obeyspaces \obeylines -\def\next##1{}\next} - -% This is @format; same as @lisp except use roman font and don't narrow margins - -\def\format{\begingroup\inENV %This group ends at the end of the @format body -\aboveenvbreak -% Make spaces be word-separators rather than space tokens. -\sepspaces % -\singlespace % -% The following causes blank lines not to be ignored -% by adding a space to the end of each line. -\let\par=\lisppar -\def\Eformat{\endgroup\afterenvbreak} -\parskip=0pt \parindent=0pt -\obeyspaces \obeylines -\def\next##1{}\next} - -% @flushleft and @flushright - -\def\flushleft{% -\begingroup\inENV %This group ends at the end of the @format body -\aboveenvbreak -% Make spaces be word-separators rather than space tokens. -\sepspaces % -% The following causes blank lines not to be ignored -% by adding a space to the end of each line. -% This also causes @ to work when the directive name -% is terminated by end of line. -\let\par=\lisppar -\def\Eflushleft{\endgroup\afterenvbreak}% -\parskip=0pt \parindent=0pt -\obeyspaces \obeylines -\def\next##1{}\next} - -\def\flushright{% -\begingroup\inENV %This group ends at the end of the @format body -\aboveenvbreak -% Make spaces be word-separators rather than space tokens. -\sepspaces % -% The following causes blank lines not to be ignored -% by adding a space to the end of each line. -% This also causes @ to work when the directive name -% is terminated by end of line. -\let\par=\lisppar -\def\Eflushright{\endgroup\afterenvbreak}% -\parskip=0pt \parindent=0pt -\advance \leftskip by 0pt plus 1fill -\obeyspaces \obeylines -\def\next##1{}\next} - -% @quotation - narrow the margins. - -\def\quotation{% -\begingroup\inENV %This group ends at the end of the @quotation body -{\parskip=0pt % because we will skip by \parskip too, later -\aboveenvbreak}% -\singlespace -\parindent=0pt -\def\Equotation{\par\endgroup\afterenvbreak}% -\advance \rightskip by \lispnarrowing -\advance \leftskip by \lispnarrowing} - -\message{defuns,} -% Define formatter for defuns -% First, allow user to change definition object font (\df) internally -\def\setdeffont #1 {\csname DEF#1\endcsname} - -\newskip\defbodyindent \defbodyindent=.4in -\newskip\defargsindent \defargsindent=50pt -\newskip\deftypemargin \deftypemargin=12pt -\newskip\deflastargmargin \deflastargmargin=18pt - -\newcount\parencount -% define \functionparens, which makes ( and ) and & do special things. -% \functionparens affects the group it is contained in. -\def\activeparens{% -\catcode`\(=\active \catcode`\)=\active \catcode`\&=\active -\catcode`\[=\active \catcode`\]=\active} -{\activeparens % Now, smart parens don't turn on until &foo (see \amprm) -\gdef\functionparens{\boldbrax\let&=\amprm\parencount=0 } -\gdef\boldbrax{\let(=\opnr\let)=\clnr\let[=\lbrb\let]=\rbrb} - -% Definitions of (, ) and & used in args for functions. -% This is the definition of ( outside of all parentheses. -\gdef\oprm#1 {{\rm\char`\(}#1 \bf \let(=\opnested % -\global\advance\parencount by 1 } -% -% This is the definition of ( when already inside a level of parens. -\gdef\opnested{\char`\(\global\advance\parencount by 1 } -% -\gdef\clrm{% Print a paren in roman if it is taking us back to depth of 0. -% also in that case restore the outer-level definition of (. -\ifnum \parencount=1 {\rm \char `\)}\sl \let(=\oprm \else \char `\) \fi -\global\advance \parencount by -1 } -% If we encounter &foo, then turn on ()-hacking afterwards -\gdef\amprm#1 {{\rm\}\let(=\oprm \let)=\clrm\ } -% -\gdef\normalparens{\boldbrax\let&=\ampnr} -} % End of definition inside \activeparens -%% These parens (in \boldbrax) actually are a little bolder than the -%% contained text. This is especially needed for [ and ] -\def\opnr{{\sf\char`\(}} \def\clnr{{\sf\char`\)}} \def\ampnr{\&} -\def\lbrb{{\bf\char`\[}} \def\rbrb{{\bf\char`\]}} - -% First, defname, which formats the header line itself. -% #1 should be the function name. -% #2 should be the type of definition, such as "Function". - -\def\defname #1#2{% -% Get the values of \leftskip and \rightskip as they were -% outside the @def... -\dimen2=\leftskip -\advance\dimen2 by -\defbodyindent -\dimen3=\rightskip -\advance\dimen3 by -\defbodyindent -\noindent % -\setbox0=\hbox{\hskip \deflastargmargin{\rm #2}\hskip \deftypemargin}% -\dimen0=\hsize \advance \dimen0 by -\wd0 % compute size for first line -\dimen1=\hsize \advance \dimen1 by -\defargsindent %size for continuations -\parshape 2 0in \dimen0 \defargsindent \dimen1 % -% Now output arg 2 ("Function" or some such) -% ending at \deftypemargin from the right margin, -% but stuck inside a box of width 0 so it does not interfere with linebreaking -{% Adjust \hsize to exclude the ambient margins, -% so that \rightline will obey them. -\advance \hsize by -\dimen2 \advance \hsize by -\dimen3 -\rlap{\rightline{{\rm #2}\hskip \deftypemargin}}}% -% Make all lines underfull and no complaints: -\tolerance=10000 \hbadness=10000 -{\df #1}\enskip % Generate function name -} - -% Actually process the body of a definition -% #1 should be the terminating control sequence, such as \Edefun. -% #2 should be the "another name" control sequence, such as \defunx. -% #3 should be the control sequence that actually processes the header, -% such as \defunheader. - -\def\defparsebody #1#2#3{\begingroup\inENV% Environment for definitionbody -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2{\begingroup\obeylines\activeparens\spacesplit#3}% -\parindent=0in -\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent -\begingroup % -\catcode 61=\active % -\obeylines\activeparens\spacesplit#3} - -\def\defmethparsebody #1#2#3#4 {\begingroup\inENV % -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2##1 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}}}% -\parindent=0in -\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent -\begingroup\obeylines\activeparens\spacesplit{#3{#4}}} - -\def\defopparsebody #1#2#3#4#5 {\begingroup\inENV % -\medbreak % -% Define the end token that this defining construct specifies -% so that it will exit this group. -\def#1{\endgraf\endgroup\medbreak}% -\def#2##1 ##2 {\def#4{##1}% -\begingroup\obeylines\activeparens\spacesplit{#3{##2}}}% -\parindent=0in -\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent -\begingroup\obeylines\activeparens\spacesplit{#3{#5}}} - -% Split up #2 at the first space token. -% call #1 with two arguments: -% the first is all of #2 before the space token, -% the second is all of #2 after that space token. -% If #2 contains no space token, all of it is passed as the first arg -% and the second is passed as empty. - -{\obeylines -\gdef\spacesplit#1#2^^M{\endgroup\spacesplitfoo{#1}#2 \relax\spacesplitfoo}% -\long\gdef\spacesplitfoo#1#2 #3#4\spacesplitfoo{% -\ifx\relax #3% -#1{#2}{}\else #1{#2}{#3#4}\fi}} - -% So much for the things common to all kinds of definitions. - -% Define @defun. - -% First, define the processing that is wanted for arguments of \defun -% Use this to expand the args and terminate the paragraph they make up - -\def\defunargs #1{\functionparens \sl -% Expand, preventing hyphenation at `-' chars. -% Note that groups don't affect changes in \hyphenchar. -\hyphenchar\tensl=0 -#1% -\hyphenchar\tensl=45 -\ifnum\parencount=0 \else \errmessage{unbalanced parens in @def arguments}\fi% -\interlinepenalty=10000 -\advance\rightskip by 0pt plus 1fil -\endgraf\penalty 10000\vskip -\parskip\penalty 10000% -} - -\def\deftypefunargs #1{% -% Expand, preventing hyphenation at `-' chars. -% Note that groups don't affect changes in \hyphenchar. -\functionparens -\code{#1}% -\interlinepenalty=10000 -\advance\rightskip by 0pt plus 1fil -\endgraf\penalty 10000\vskip -\parskip\penalty 10000% -} - -% Do complete processing of one @defun or @defunx line already parsed. - -% @deffn Command forward-char nchars - -\def\deffn{\defmethparsebody\Edeffn\deffnx\deffnheader} - -\def\deffnheader #1#2#3{\doind {fn}{\code{#2}}% -\begingroup\defname {#2}{#1}\defunargs{#3}\endgroup % -\catcode 61=\other % Turn off change made in \defparsebody -} - -% @defun == @deffn Function - -\def\defun{\defparsebody\Edefun\defunx\defunheader} - -\def\defunheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index -\begingroup\defname {#1}{Function}% -\defunargs {#2}\endgroup % -\catcode 61=\other % Turn off change made in \defparsebody -} - -% @deftypefun int foobar (int @var{foo}, float @var{bar}) - -\def\deftypefun{\defparsebody\Edeftypefun\deftypefunx\deftypefunheader} - -% #1 is the data type. #2 is the name and args. -\def\deftypefunheader #1#2{\deftypefunheaderx{#1}#2 \relax} -% #1 is the data type, #2 the name, #3 the args. -\def\deftypefunheaderx #1#2 #3\relax{% -\doind {fn}{\code{#2}}% Make entry in function index -\begingroup\defname {\code{#1} #2}{Function}% -\deftypefunargs {#3}\endgroup % -\catcode 61=\other % Turn off change made in \defparsebody -} - -% @deftypefn {Library Function} int foobar (int @var{foo}, float @var{bar}) - -\def\deftypefn{\defmethparsebody\Edeftypefn\deftypefnx\deftypefnheader} - -% #1 is the classification. #2 is the data type. #3 is the name and args. -\def\deftypefnheader #1#2#3{\deftypefnheaderx{#1}{#2}#3 \relax} -% #1 is the classification, #2 the data type, #3 the name, #4 the args. -\def\deftypefnheaderx #1#2#3 #4\relax{% -\doind {fn}{\code{#3}}% Make entry in function index -\begingroup\defname {\code{#2} #3}{#1}% -\deftypefunargs {#4}\endgroup % -\catcode 61=\other % Turn off change made in \defparsebody -} - -% @defmac == @deffn Macro - -\def\defmac{\defparsebody\Edefmac\defmacx\defmacheader} - -\def\defmacheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index -\begingroup\defname {#1}{Macro}% -\defunargs {#2}\endgroup % -\catcode 61=\other % Turn off change made in \defparsebody -} - -% @defspec == @deffn Special Form - -\def\defspec{\defparsebody\Edefspec\defspecx\defspecheader} - -\def\defspecheader #1#2{\doind {fn}{\code{#1}}% Make entry in function index -\begingroup\defname {#1}{Special Form}% -\defunargs {#2}\endgroup % -\catcode 61=\other % Turn off change made in \defparsebody -} - -% This definition is run if you use @defunx -% anywhere other than immediately after a @defun or @defunx. - -\def\deffnx #1 {\errmessage{@deffnx in invalid context}} -\def\defunx #1 {\errmessage{@defunx in invalid context}} -\def\defmacx #1 {\errmessage{@defmacx in invalid context}} -\def\defspecx #1 {\errmessage{@defspecx in invalid context}} -\def\deftypefnx #1 {\errmessage{@deftypefnx in invalid context}} -\def\deftypeunx #1 {\errmessage{@deftypeunx in invalid context}} - -% @defmethod, and so on - -% @defop {Funny Method} foo-class frobnicate argument - -\def\defop #1 {\def\defoptype{#1}% -\defopparsebody\Edefop\defopx\defopheader\defoptype} - -\def\defopheader #1#2#3{% -\dosubind {fn}{\code{#2}}{on #1}% Make entry in function index -\begingroup\defname {#2}{\defoptype{} on #1}% -\defunargs {#3}\endgroup % -} - -% @defmethod == @defop Method - -\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader} - -\def\defmethodheader #1#2#3{% -\dosubind {fn}{\code{#2}}{on #1}% entry in function index -\begingroup\defname {#2}{Method on #1}% -\defunargs {#3}\endgroup % -} - -% @deftypemethod class type frobnicate argument - -\def\deftypemethod{\defmethparsebody\Edeftypemethod\deftypemethodx% -\deftypemethodheader} - -% #1 is the class. #2 is the data type. #3 is the name and args. -\def\deftypemethodheader #1#2#3{\deftypemethodheaderx{#1}{#2}#3 \relax} -% #1 is the class, #2 the data type, #3 then name , #4 the args. -\def\deftypemethodheaderx #1#2#3 #4\relax{\dosubind {fn}{\code{#3}}{on #1}% -\begingroup\defname {\code{#2} #3}{Method on #1}% -\deftypefunargs {#4}\endgroup -} - -% @defcv {Class Option} foo-class foo-flag - -\def\defcv #1 {\def\defcvtype{#1}% -\defopparsebody\Edefcv\defcvx\defcvarheader\defcvtype} - -\def\defcvarheader #1#2#3{% -\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index -\begingroup\defname {#2}{\defcvtype{} of #1}% -\defvarargs {#3}\endgroup % -} - -% @defivar == @defcv {Instance Variable} - -\def\defivar{\defmethparsebody\Edefivar\defivarx\defivarheader} - -\def\defivarheader #1#2#3{% -\dosubind {vr}{\code{#2}}{of #1}% Make entry in var index -\begingroup\defname {#2}{Instance Variable of #1}% -\defvarargs {#3}\endgroup % -} - -% These definitions are run if you use @defmethodx, etc., -% anywhere other than immediately after a @defmethod, etc. - -\def\defopx #1 {\errmessage{@defopx in invalid context}} -\def\defmethodx #1 {\errmessage{@defmethodx in invalid context}} -\def\defcvx #1 {\errmessage{@defcvx in invalid context}} -\def\defivarx #1 {\errmessage{@defivarx in invalid context}} - -% Now @defvar - -% First, define the processing that is wanted for arguments of @defvar. -% This is actually simple: just print them in roman. -% This must expand the args and terminate the paragraph they make up -\def\defvarargs #1{\normalparens #1% -\interlinepenalty=10000 -\endgraf\penalty 10000\vskip -\parskip\penalty 10000} - -% @defvr Counter foo-count - -\def\defvr{\defmethparsebody\Edefvr\defvrx\defvrheader} - -\def\defvrheader #1#2#3{\doind {vr}{\code{#2}}% -\begingroup\defname {#2}{#1}\defvarargs{#3}\endgroup} - -% @defvar == @defvr Variable - -\def\defvar{\defparsebody\Edefvar\defvarx\defvarheader} - -\def\defvarheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index -\begingroup\defname {#1}{Variable}% -\defvarargs {#2}\endgroup % -} - -% @defopt == @defvr {User Option} - -\def\defopt{\defparsebody\Edefopt\defoptx\defoptheader} - -\def\defoptheader #1#2{\doind {vr}{\code{#1}}% Make entry in var index -\begingroup\defname {#1}{User Option}% -\defvarargs {#2}\endgroup % -} - -% @deftypevar int foobar - -\def\deftypevar{\defparsebody\Edeftypevar\deftypevarx\deftypevarheader} - -% #1 is the data type. #2 is the name. -\def\deftypevarheader #1#2{% -\doind {vr}{\code{#2}}% Make entry in variables index -\begingroup\defname {\code{#1} #2}{Variable}% -\interlinepenalty=10000 -\endgraf\penalty 10000\vskip -\parskip\penalty 10000 -\endgroup} - -% @deftypevr {Global Flag} int enable - -\def\deftypevr{\defmethparsebody\Edeftypevr\deftypevrx\deftypevrheader} - -\def\deftypevrheader #1#2#3{\doind {vr}{\code{#3}}% -\begingroup\defname {\code{#2} #3}{#1} -\interlinepenalty=10000 -\endgraf\penalty 10000\vskip -\parskip\penalty 10000 -\endgroup} - -% This definition is run if you use @defvarx -% anywhere other than immediately after a @defvar or @defvarx. - -\def\defvrx #1 {\errmessage{@defvrx in invalid context}} -\def\defvarx #1 {\errmessage{@defvarx in invalid context}} -\def\defoptx #1 {\errmessage{@defoptx in invalid context}} -\def\deftypevarx #1 {\errmessage{@deftypevarx in invalid context}} -\def\deftypevrx #1 {\errmessage{@deftypevrx in invalid context}} - -% Now define @deftp -% Args are printed in bold, a slight difference from @defvar. - -\def\deftpargs #1{\bf \defvarargs{#1}} - -% @deftp Class window height width ... - -\def\deftp{\defmethparsebody\Edeftp\deftpx\deftpheader} - -\def\deftpheader #1#2#3{\doind {tp}{\code{#2}}% -\begingroup\defname {#2}{#1}\deftpargs{#3}\endgroup} - -% This definition is run if you use @deftpx, etc -% anywhere other than immediately after a @deftp, etc. - -\def\deftpx #1 {\errmessage{@deftpx in invalid context}} - -\message{cross reference,} -% Define cross-reference macros -\newwrite \auxfile - -\newif\ifhavexrefs % True if xref values are known. -\newif\ifwarnedxrefs % True if we warned once that they aren't known. - -% \setref{foo} defines a cross-reference point named foo. - -\def\setref#1{% -%\dosetq{#1-title}{Ytitle}% -\dosetq{#1-pg}{Ypagenumber}% -\dosetq{#1-snt}{Ysectionnumberandtype}} - -\def\unnumbsetref#1{% -%\dosetq{#1-title}{Ytitle}% -\dosetq{#1-pg}{Ypagenumber}% -\dosetq{#1-snt}{Ynothing}} - -\def\appendixsetref#1{% -%\dosetq{#1-title}{Ytitle}% -\dosetq{#1-pg}{Ypagenumber}% -\dosetq{#1-snt}{Yappendixletterandtype}} - -% \xref, \pxref, and \ref generate cross-references to specified points. -% For \xrefX, #1 is the node name, #2 the name of the Info -% cross-reference, #3 the printed node name, #4 the name of the Info -% file, #5 the name of the printed manual. All but the node name can be -% omitted. -% -\def\pxref#1{see \xrefX[#1,,,,,,,]} -\def\xref#1{See \xrefX[#1,,,,,,,]} -\def\ref#1{\xrefX[#1,,,,,,,]} -\def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup% -\def\printedmanual{\ignorespaces #5}% -\def\printednodename{\ignorespaces #3}% -% -\setbox1=\hbox{\printedmanual}% -\setbox0=\hbox{\printednodename}% -\ifdim \wd0=0pt% -\def\printednodename{\ignorespaces #1}% -%%% Uncommment the following line to make the actual chapter or section title -%%% appear inside the square brackets. -%\def\printednodename{#1-title}% -\fi% -% -% -% If we use \unhbox0 and \unhbox1 to print the node names, TeX does -% not insert empty discretionaries after hyphens, which means that it -% will not find a line break at a hyphen in a node names. Since some -% manuals are best written with fairly long node names, containing -% hyphens, this is a loss. Therefore, we simply give the text of -% the node name again, so it is as if TeX is seeing it for the first -% time. -\ifdim \wd1>0pt -section ``\printednodename'' in \cite{\printedmanual}% -\else% -\turnoffactive% -\refx{#1-snt}{} [\printednodename], page\tie\refx{#1-pg}{}% -\fi -\endgroup} - -% \dosetq is the interface for calls from other macros - -% Use \turnoffactive so that punctuation chars such as underscore -% work in node names. -\def\dosetq #1#2{{\let\folio=0 \turnoffactive% -\edef\next{\write\auxfile{\internalsetq {#1}{#2}}}% -\next}} - -% \internalsetq {foo}{page} expands into -% CHARACTERS 'xrdef {foo}{...expansion of \Ypage...} -% When the aux file is read, ' is the escape character - -\def\internalsetq #1#2{'xrdef {#1}{\csname #2\endcsname}} - -% Things to be expanded by \internalsetq - -\def\Ypagenumber{\folio} - -\def\Ytitle{\thischapter} - -\def\Ynothing{} - -\def\Ysectionnumberandtype{% -\ifnum\secno=0 Chapter\xreftie\the\chapno % -\else \ifnum \subsecno=0 Section\xreftie\the\chapno.\the\secno % -\else \ifnum \subsubsecno=0 % -Section\xreftie\the\chapno.\the\secno.\the\subsecno % -\else % -Section\xreftie\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno % -\fi \fi \fi } - -\def\Yappendixletterandtype{% -\ifnum\secno=0 Appendix\xreftie'char\the\appendixno{}% -\else \ifnum \subsecno=0 Section\xreftie'char\the\appendixno.\the\secno % -\else \ifnum \subsubsecno=0 % -Section\xreftie'char\the\appendixno.\the\secno.\the\subsecno % -\else % -Section\xreftie'char\the\appendixno.\the\secno.\the\subsecno.\the\subsubsecno % -\fi \fi \fi } - -\gdef\xreftie{'tie} - -% Use TeX 3.0's \inputlineno to get the line number, for better error -% messages, but if we're using an old version of TeX, don't do anything. -% -\ifx\inputlineno\thisisundefined - \let\linenumber = \empty % Non-3.0. -\else - \def\linenumber{\the\inputlineno:\space} -\fi - -% Define \refx{NAME}{SUFFIX} to reference a cross-reference string named NAME. -% If its value is nonempty, SUFFIX is output afterward. - -\def\refx#1#2{% - \expandafter\ifx\csname X#1\endcsname\relax - % If not defined, say something at least. - $\langle$un\-de\-fined$\rangle$% - \ifhavexrefs - \message{\linenumber Undefined cross reference `#1'.}% - \else - \ifwarnedxrefs\else - \global\warnedxrefstrue - \message{Cross reference values unknown; you must run TeX again.}% - \fi - \fi - \else - % It's defined, so just use it. - \csname X#1\endcsname - \fi - #2% Output the suffix in any case. -} - -% Read the last existing aux file, if any. No error if none exists. - -% This is the macro invoked by entries in the aux file. -\def\xrdef #1#2{ -{\catcode`\'=\other\expandafter \gdef \csname X#1\endcsname {#2}}} - -\def\readauxfile{% -\begingroup -\catcode `\^^@=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\^^C=\other -\catcode `\^^D=\other -\catcode `\^^E=\other -\catcode `\^^F=\other -\catcode `\^^G=\other -\catcode `\^^H=\other -\catcode `\ =\other -\catcode `\^^L=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\=\other -\catcode `\^^[=\other -\catcode `\^^\=\other -\catcode `\^^]=\other -\catcode `\^^^=\other -\catcode `\^^_=\other -\catcode `\@=\other -\catcode `\^=\other -\catcode `\~=\other -\catcode `\[=\other -\catcode `\]=\other -\catcode`\"=\other -\catcode`\_=\other -\catcode`\|=\other -\catcode`\<=\other -\catcode`\>=\other -\catcode `\$=\other -\catcode `\#=\other -\catcode `\&=\other -% the aux file uses ' as the escape. -% Turn off \ as an escape so we do not lose on -% entries which were dumped with control sequences in their names. -% For example, 'xrdef {$\leq $-fun}{page ...} made by @defun ^^ -% Reference to such entries still does not work the way one would wish, -% but at least they do not bomb out when the aux file is read in. -\catcode `\{=1 \catcode `\}=2 -\catcode `\%=\other -\catcode `\'=0 -\catcode `\\=\other -\openin 1 \jobname.aux -\ifeof 1 \else \closein 1 \input \jobname.aux \global\havexrefstrue -\fi -% Open the new aux file. Tex will close it automatically at exit. -\openout \auxfile=\jobname.aux -\endgroup} - - -% Footnotes. - -\newcount \footnoteno - -\def\supereject{\par\penalty -20000\footnoteno =0 } - -\let\ptexfootnote=\footnote - -{\catcode `\@=11 -\long\gdef\footnote #1{\global\advance \footnoteno by \@ne -\removelastskip -\edef\thisfootno{$^{\the\footnoteno}$}% -\let\@sf\empty -\ifhmode\edef\@sf{\spacefactor\the\spacefactor}\/\fi -\thisfootno\@sf \footnotezzz{#1}} -% \parsearg\footnotezzz} - -\long\gdef\footnotezzz #1{\insert\footins{ -\interlinepenalty\interfootnotelinepenalty -\splittopskip\ht\strutbox % top baseline for broken footnotes -\splitmaxdepth\dp\strutbox \floatingpenalty\@MM -\leftskip\z@skip \rightskip\z@skip \spaceskip\z@skip \xspaceskip\z@skip -\footstrut\parindent=\defaultparindent\hang\textindent{\thisfootno}#1\strut}} - -}%end \catcode `\@=11 - -% End of control word definitions. - -\message{and turning on texinfo input format.} - -\def\openindices{% - \newindex{cp}% - \newcodeindex{fn}% - \newcodeindex{vr}% - \newcodeindex{tp}% - \newcodeindex{ky}% - \newcodeindex{pg}% -} - -% Set some numeric style parameters, for 8.5 x 11 format. - -%\hsize = 6.5in -\newdimen\defaultparindent \defaultparindent = 15pt -\parindent = \defaultparindent -\parskip 18pt plus 1pt -\baselineskip 15pt -\advance\topskip by 1.2cm - -% Prevent underfull vbox error messages. -\vbadness=10000 - -% Use TeX 3.0's \emergencystretch to help line breaking, but if we're -% using an old version of TeX, don't do anything. We want the amount of -% stretch added to depend on the line length, hence the dependence on -% \hsize. This makes it come to about 9pt for the 8.5x11 format. -% -\ifx\emergencystretch\thisisundefined \else - \emergencystretch = \hsize - \divide\emergencystretch by 45 -\fi - -% Use @smallbook to reset parameters for 7x9.5 format -\def\smallbook{ -\global\lispnarrowing = 0.3in -\global\baselineskip 12pt -\global\parskip 3pt plus 1pt -\global\hsize = 5in -\global\doublecolumnhsize=2.4in \global\doublecolumnvsize=15.0in -\global\vsize=7.5in -\global\tolerance=700 -\global\hfuzz=1pt - -\global\pagewidth=\hsize -\global\pageheight=\vsize - -\global\let\smalllisp=\smalllispx -\global\let\smallexample=\smalllispx -\global\def\Esmallexample{\Esmalllisp} -} - -%% For a final copy, take out the rectangles -%% that mark overfull boxes (in case you have decided -%% that the text looks ok even though it passes the margin). -\def\finalout{\hfuzz=\maxdimen} - -% Define macros to output various characters with catcode for normal text. -\catcode`\"=\other -\catcode`\~=\other -\catcode`\^=\other -\catcode`\_=\other -\catcode`\|=\other -\catcode`\<=\other -\catcode`\>=\other -\catcode`\+=\other -\def\normaldoublequote{"} -\def\normaltilde{~} -\def\normalcaret{^} -\def\normalunderscore{_} -\def\normalverticalbar{|} -\def\normalless{<} -\def\normalgreater{>} -\def\normalplus{+} - -% This macro is used to make a character print one way in ttfont -% where it can probably just be output, and another way in other fonts, -% where something hairier probably needs to be done. -% -% #1 is what to print if we are indeed using \tt; #2 is what to print -% otherwise. Since all the Computer Modern typewriter fonts have zero -% interword stretch (and shrink), and it is reasonable to expect all -% typewriter fonts to have this, we can check that font parameter. -% -\def\ifusingtt#1#2{\ifdim \fontdimen3\the\font=0pt #1\else #2\fi} - -% Turn off all special characters except @ -% (and those which the user can use as if they were ordinary). -% Most of these we simply print from the \tt font, but for some, we can -% use math or other variants that look better in normal text. - -\catcode`\"=\active -\def\activedoublequote{{\tt \char '042}} -\let"=\activedoublequote -\catcode`\~=\active -\def~{{\tt \char '176}} -\chardef\hat=`\^ -\catcode`\^=\active -\def^{{\tt \hat}} - -\catcode`\_=\active -\def_{\ifusingtt\normalunderscore\_} -% Subroutine for the previous macro. -\def\_{\lvvmode \kern.06em \vbox{\hrule width.3em height.1ex}} - -% \lvvmode is equivalent in function to \leavevmode. -% Using \leavevmode runs into trouble when written out to -% an index file due to the expansion of \leavevmode into ``\unhbox -% \voidb@x'' ---which looks to TeX like ``\unhbox \voidb\x'' due to our -% magic tricks with @. -\def\lvvmode{\vbox to 0pt{}} - -\catcode`\|=\active -\def|{{\tt \char '174}} -\chardef \less=`\< -\catcode`\<=\active -\def<{{\tt \less}} -\chardef \gtr=`\> -\catcode`\>=\active -\def>{{\tt \gtr}} -\catcode`\+=\active -\def+{{\tt \char 43}} -%\catcode 27=\active -%\def^^[{$\diamondsuit$} - -% Used sometimes to turn off (effectively) the active characters -% even after parsing them. -\def\turnoffactive{\let"=\normaldoublequote -\let~=\normaltilde -\let^=\normalcaret -\let_=\normalunderscore -\let|=\normalverticalbar -\let<=\normalless -\let>=\normalgreater -\let+=\normalplus} - -% Set up an active definition for =, but don't enable it most of the time. -{\catcode`\==\active -\global\def={{\tt \char 61}}} - -\catcode`\@=0 - -% \rawbackslashxx output one backslash character in current font -\global\chardef\rawbackslashxx=`\\ -%{\catcode`\\=\other -%@gdef@rawbackslashxx{\}} - -% \rawbackslash redefines \ as input to do \rawbackslashxx. -{\catcode`\\=\active -@gdef@rawbackslash{@let\=@rawbackslashxx }} - -% \normalbackslash outputs one backslash in fixed width font. -\def\normalbackslash{{\tt\rawbackslashxx}} - -% Say @foo, not \foo, in error messages. -\escapechar=`\@ - -% \catcode 17=0 % Define control-q -\catcode`\\=\active - -% If a .fmt file is being used, we don't want the `\input texinfo' to show up. -% That is what \eatinput is for; after that, the `\' should revert to printing -% a backslash. -% -@gdef@eatinput input texinfo{@fixbackslash} -@global@let\ = @eatinput - -% On the other hand, perhaps the file did not have a `\input texinfo'. Then -% the first `\{ in the file would cause an error. This macro tries to fix -% that, assuming it is called before the first `\' could plausibly occur. -% -@gdef@fixbackslash{@ifx\@eatinput @let\ = @normalbackslash @fi} - -%% These look ok in all fonts, so just make them not special. The @rm below -%% makes sure that the current font starts out as the newly loaded cmr10 -@catcode`@$=@other @catcode`@%=@other @catcode`@&=@other @catcode`@#=@other - -@textfonts -@rm - -@c Local variables: -@c page-delimiter: "^\\\\message" -@c End: