From: Suniel Mahesh Date: Sat, 29 Aug 2020 09:35:03 +0000 (+0530) Subject: configs/rockpro64: new defconfig X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=4293ce6e3b236b8b52ad0b1567604f6d9e30d709;p=buildroot.git configs/rockpro64: new defconfig A defconfig for the rockpro64 was added in 59e1077b4ebe79622a454b0a8a840e4349a0440d, but then removed in 10f49213b7e2837ae6ed63fc16fbdaa954ecd87f because an ARM32 compiler was needed to build ATF, and this was not supported back then. Now, since package/arm-gnu-a-toolchain/ has been added, this defconfig can be re-introduced. Following new changes are introduced in comparision with the older changeset: - renamed defconfig from pine64_rockpro64 to rockpro64 - updated readme - using a GPT partition layout - update defconfig to build ATF - bump u-boot to 2020.07 - bump linux to 5.8.2 Signed-off-by: Suniel Mahesh Reviewed-by: Jagan Teki Signed-off-by: Arnout Vandecappelle (Essensium/Mind) [Arnout: fixate U-Boot version; remove blind BR2_TARGET_UBOOT_NEEDS_PYTHON] --- diff --git a/DEVELOPERS b/DEVELOPERS index 192eab8de9..9ea49d8a11 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2451,6 +2451,7 @@ F: package/powertop/ N: Suniel Mahesh F: board/firefly/ +F: board/pine64/rockpro64 F: board/radxa/rockpi-4 F: board/radxa/rockpi-n8 F: board/radxa/rockpi-n10 @@ -2458,6 +2459,7 @@ F: configs/roc_pc_rk3399_defconfig F: configs/rock_pi_4_defconfig F: configs/rock_pi_n8_defconfig F: configs/rock_pi_n10_defconfig +F: configs/rockpro64_defconfig F: package/arm-gnu-a-toolchain/ N: Sven Haardiek diff --git a/board/pine64/rockpro64/extlinux.conf b/board/pine64/rockpro64/extlinux.conf new file mode 100644 index 0000000000..ea081a1f0b --- /dev/null +++ b/board/pine64/rockpro64/extlinux.conf @@ -0,0 +1,4 @@ +label RK3399_ROCKPRO64 linux + kernel /Image + devicetree /rk3399-rockpro64.dtb + append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p4 rw rootwait diff --git a/board/pine64/rockpro64/genimage.cfg b/board/pine64/rockpro64/genimage.cfg new file mode 100644 index 0000000000..0ba25c0eef --- /dev/null +++ b/board/pine64/rockpro64/genimage.cfg @@ -0,0 +1,39 @@ +image boot.vfat { + vfat { + files = { + "Image", + "rk3399-rockpro64.dtb", + "extlinux" + } + } + size = 64M +} + +image sdcard.img { + + hdimage { + gpt = true + } + + partition loader1 { + image = "idbloader.img" + offset = 32K + } + + partition loader2 { + image = "u-boot.itb" + offset = 8M + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 16M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/pine64/rockpro64/post-build.sh b/board/pine64/rockpro64/post-build.sh new file mode 100755 index 0000000000..ba29375c05 --- /dev/null +++ b/board/pine64/rockpro64/post-build.sh @@ -0,0 +1,5 @@ +#!/bin/sh + +BOARD_DIR="$(dirname $0)" + +install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf diff --git a/board/pine64/rockpro64/readme.txt b/board/pine64/rockpro64/readme.txt new file mode 100644 index 0000000000..de86970104 --- /dev/null +++ b/board/pine64/rockpro64/readme.txt @@ -0,0 +1,60 @@ +PINE64 ROCKPro64 +================ +https://www.pine64.org/rockpro64/ + +Build: +====== + $ make rockpro64_defconfig + $ make + +Files created in output directory +================================= + +output/images + +├── bl31.elf +├── boot.vfat +├── extlinux +├── idbloader.img +├── Image +├── rk3399-rockpro64.dtb +├── rootfs.ext2 +├── rootfs.ext4 -> rootfs.ext2 +├── rootfs.tar +├── sdcard.img +├── u-boot.bin +└── u-boot.itb + +Creating bootable SD card: +========================== + +Simply invoke (as root) + +sudo dd if=output/images/sdcard.img of=/dev/sdX && sync + +Where X is your SD card device. + +Booting: +======== +RockPro64 has a 40-pin PI-2 GPIO Bus. + +Connect a jumper between pin 23 and pin 25 for SD card boot. + +Serial console: +--------------- +The pin layout for serial console on PI-2 GPIO Bus is as follows: + +pin 6: gnd +pin 8: tx +pin 10: rx + +Initially connect pin 6 and pin 8(transmit). Apply power to RockPro64, once the +power is on then connect pin 10(receive). + +Baudrate for this board is 1500000. + +Login: +------ +Enter 'root' as login user, and the prompt is ready. + +https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/rockpro64.html diff --git a/configs/rockpro64_defconfig b/configs/rockpro64_defconfig new file mode 100644 index 0000000000..5086320cbc --- /dev/null +++ b/configs/rockpro64_defconfig @@ -0,0 +1,53 @@ +# Architecture +BR2_aarch64=y +BR2_cortex_a72_a53=y + +# Linux headers same as kernel, a 5.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_8=y + +# Firmware +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="11a0a46a899fcc3b1fdb214b382f3d7495d88eca" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES="" + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2020.07" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="rockpro64-rk3399" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYTHON3=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="idbloader.img" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.8.2" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-rockpro64" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y + +# Filesystem +BR2_TARGET_GENERIC_HOSTNAME="rockpro64" +BR2_TARGET_GENERIC_ISSUE="Welcome to ROCKPRO64" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/pine64/rockpro64/genimage.cfg" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/pine64/rockpro64/post-build.sh"