From: Oleksandr Zhadan Date: Tue, 18 Jun 2019 20:32:03 +0000 (-0400) Subject: configs/arcturus_ucp1020: bump Linux and U-Boot X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=42a172bb0ee9acfc9b71e72d8bae7e5958503d72;p=buildroot.git configs/arcturus_ucp1020: bump Linux and U-Boot Bump Linux and U-Boot versions. The Linux configuration file and patches are no longer needed. Signed-off-by: Oleksandr Zhadan Signed-off-by: Michael Durrant [Thomas: also use a tarball for U-Boot.] Signed-off-by: Thomas Petazzoni --- diff --git a/board/arcturus/ppc-ucp1020/configs/linux-4.1.x.config b/board/arcturus/ppc-ucp1020/configs/linux-4.1.x.config deleted file mode 100644 index a371df810e..0000000000 --- a/board/arcturus/ppc-ucp1020/configs/linux-4.1.x.config +++ /dev/null @@ -1,269 +0,0 @@ -CONFIG_PPC_85xx=y -CONFIG_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_CROSS_COMPILE="powerpc-linux-" -CONFIG_LOCALVERSION="-ANI-uCP1020-64EE512" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_DEFAULT_HOSTNAME="uCP1020-64EE512" -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_AUDIT=y -CONFIG_NO_HZ_IDLE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_LOG_CPU_MAX_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y -CONFIG_BLK_DEV_INITRD=y -# CONFIG_RD_BZIP2 is not set -# CONFIG_RD_LZMA is not set -# CONFIG_RD_XZ is not set -# CONFIG_RD_LZO is not set -# CONFIG_RD_LZ4 is not set -CONFIG_SYSCTL_SYSCALL=y -CONFIG_EMBEDDED=y -# CONFIG_SLUB_DEBUG is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_JUMP_LABEL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -# CONFIG_EFI_PARTITION is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_UCP1020_SOM=y -CONFIG_HIGHMEM=y -CONFIG_PREEMPT=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_MATH_EMULATION=y -CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED=y -CONFIG_SWIOTLB=y -# CONFIG_COMPACTION is not set -CONFIG_PCI=y -CONFIG_PCIEPORTBUS=y -# CONFIG_PCIEAER is not set -# CONFIG_PCIEASPM is not set -CONFIG_PCI_MSI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_SYN_COOKIES=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -CONFIG_BRIDGE_NETFILTER=y -CONFIG_NF_CONNTRACK=y -CONFIG_NF_CONNTRACK_FTP=y -CONFIG_NETFILTER_XT_TARGET_CONNMARK=y -CONFIG_NETFILTER_XT_TARGET_MARK=y -CONFIG_NETFILTER_XT_MATCH_COMMENT=y -CONFIG_NETFILTER_XT_MATCH_CONNMARK=y -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=y -CONFIG_NETFILTER_XT_MATCH_HELPER=y -CONFIG_NETFILTER_XT_MATCH_MARK=y -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y -CONFIG_NETFILTER_XT_MATCH_STATE=y -CONFIG_NF_CONNTRACK_IPV4=y -CONFIG_IP_NF_IPTABLES=y -CONFIG_IP_NF_FILTER=y -CONFIG_IP_NF_TARGET_REJECT=y -CONFIG_IP_NF_NAT=y -CONFIG_IP_NF_TARGET_MASQUERADE=y -CONFIG_IP_NF_TARGET_NETMAP=y -CONFIG_IP_NF_TARGET_REDIRECT=y -CONFIG_IP_NF_MANGLE=y -CONFIG_BRIDGE=y -CONFIG_VLAN_8021Q=y -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_HTB=y -CONFIG_CFG80211=y -# CONFIG_CFG80211_DEFAULT_PS is not set -CONFIG_MAC80211=y -# CONFIG_MAC80211_RC_MINSTREL is not set -CONFIG_UEVENT_HELPER_PATH="/bin/hotplug" -CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_FTL=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP_OF=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_SST25L=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_MTD_NAND_FSL_ELBC=y -CONFIG_MTD_NAND_FSL_UPM=y -CONFIG_MTD_SPI_NOR=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=131072 -CONFIG_EEPROM_AT25=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -CONFIG_BLK_DEV_SR=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_LOGGING=y -CONFIG_NETDEVICES=y -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_NET_VENDOR_ADAPTEC is not set -# CONFIG_NET_VENDOR_AGERE is not set -# CONFIG_NET_VENDOR_ALTEON is not set -# CONFIG_NET_VENDOR_AMD is not set -# CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_VENDOR_ATHEROS is not set -# CONFIG_NET_CADENCE is not set -# CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_BROCADE is not set -# CONFIG_NET_VENDOR_CHELSIO is not set -# CONFIG_NET_VENDOR_CISCO is not set -# CONFIG_NET_VENDOR_DEC is not set -# CONFIG_NET_VENDOR_DLINK is not set -# CONFIG_NET_VENDOR_EMULEX is not set -# CONFIG_NET_VENDOR_EXAR is not set -CONFIG_GIANFAR=y -# CONFIG_NET_VENDOR_HP is not set -# CONFIG_NET_VENDOR_INTEL is not set -# CONFIG_NET_VENDOR_MARVELL is not set -# CONFIG_NET_VENDOR_MELLANOX is not set -# CONFIG_NET_VENDOR_MICREL is not set -# CONFIG_NET_VENDOR_MICROCHIP is not set -# CONFIG_NET_VENDOR_MYRI is not set -# CONFIG_NET_VENDOR_NATSEMI is not set -# CONFIG_NET_VENDOR_NVIDIA is not set -# CONFIG_NET_VENDOR_OKI is not set -# CONFIG_NET_PACKET_ENGINE is not set -# CONFIG_NET_VENDOR_QLOGIC is not set -# CONFIG_NET_VENDOR_QUALCOMM is not set -# CONFIG_NET_VENDOR_REALTEK is not set -# CONFIG_NET_VENDOR_RDC is not set -# CONFIG_NET_VENDOR_ROCKER is not set -# CONFIG_NET_VENDOR_SAMSUNG is not set -# CONFIG_NET_VENDOR_SEEQ is not set -# CONFIG_NET_VENDOR_SILAN is not set -# CONFIG_NET_VENDOR_SIS is not set -# CONFIG_NET_VENDOR_SMSC is not set -# CONFIG_NET_VENDOR_STMICRO is not set -# CONFIG_NET_VENDOR_SUN is not set -# CONFIG_NET_VENDOR_TEHUTI is not set -# CONFIG_NET_VENDOR_TI is not set -# CONFIG_NET_VENDOR_VIA is not set -# CONFIG_NET_VENDOR_WIZNET is not set -# CONFIG_NET_VENDOR_XILINX is not set -CONFIG_MICREL_PHY=y -CONFIG_IWLWIFI=m -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIO_LIBPS2=y -CONFIG_LEGACY_PTY_COUNT=16 -CONFIG_NOZOMI=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=2 -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -CONFIG_NVRAM=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MPC=y -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_FSL_ESPI=y -CONFIG_SPI_SPIDEV=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_MPC8XXX=y -CONFIG_SENSORS_LM90=y -CONFIG_THERMAL=y -CONFIG_WATCHDOG=y -CONFIG_BOOKE_WDT=y -CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT=36 -CONFIG_MEDIA_SUPPORT=y -CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_MEDIA_CONTROLLER=y -CONFIG_VIDEO_V4L2_SUBDEV_API=y -CONFIG_MEDIA_USB_SUPPORT=y -CONFIG_USB_VIDEO_CLASS=y -CONFIG_USB_GSPCA=y -CONFIG_USB_PWC=y -CONFIG_USB_ZR364XX=y -CONFIG_USB_STKWEBCAM=y -CONFIG_VIDEO_EM28XX=y -CONFIG_VIDEO_EM28XX_V4L2=y -# CONFIG_HID is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y -CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_ACM=y -CONFIG_USB_WDM=y -CONFIG_USB_TMC=y -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DEBUG=y -CONFIG_USB_MDC800=y -CONFIG_MMC=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_PLTFM=y -CONFIG_MMC_SDHCI_OF_ESDHC=y -CONFIG_DMADEVICES=y -CONFIG_FSL_DMA=y -CONFIG_ASYNC_TX_DMA=y -# CONFIG_IOMMU_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_EXT4_FS=y -CONFIG_XFS_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_NTFS_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_WBUF_VERIFY=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_FS_XATTR=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_RUBIN=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V4=y -CONFIG_NFSD=y -CONFIG_CIFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=60 -# CONFIG_RCU_CPU_STALL_INFO is not set -# CONFIG_FTRACE is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA1_PPC=y -CONFIG_CRYPTO_DEFLATE=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_DEV_TALITOS=y diff --git a/board/arcturus/ppc-ucp1020/patches/linux/0001-Arcturus-uCP1020-BSP-support.patch b/board/arcturus/ppc-ucp1020/patches/linux/0001-Arcturus-uCP1020-BSP-support.patch deleted file mode 100644 index 759712714e..0000000000 --- a/board/arcturus/ppc-ucp1020/patches/linux/0001-Arcturus-uCP1020-BSP-support.patch +++ /dev/null @@ -1,462 +0,0 @@ -From a243628639e12a4bd0a737eac78a12ed240cd137 Mon Sep 17 00:00:00 2001 -From: Oleksandr G Zhadan -Date: Mon, 18 Jul 2016 10:40:16 -0400 -Subject: [PATCH] Arcturus uCP1020 BSP support - -The uCP1020 product family (ucp1020) is an Arcturus Networks Inc. -System on Modules product featuring a NXP QorIQ P1020 CPU, -optionally populated with 1 or 2 Gig-Ethernet PHYs, -DDR3, NOR Flash, eMMC NAND Flash and/or SPI Flash. - -Signed-off-by: Oleksandr G Zhadan -Signed-off-by: Michael Durrant ---- - arch/powerpc/boot/dts/ucp1020.dts | 87 ++++++++++++ - arch/powerpc/boot/dts/ucp1020.dtsi | 211 ++++++++++++++++++++++++++++++ - arch/powerpc/platforms/85xx/Kconfig | 7 + - arch/powerpc/platforms/85xx/Makefile | 1 + - arch/powerpc/platforms/85xx/ucp1020_som.c | 92 +++++++++++++ - 5 files changed, 398 insertions(+) - create mode 100644 arch/powerpc/boot/dts/ucp1020.dts - create mode 100644 arch/powerpc/boot/dts/ucp1020.dtsi - create mode 100644 arch/powerpc/platforms/85xx/ucp1020_som.c - -diff --git a/arch/powerpc/boot/dts/ucp1020.dts b/arch/powerpc/boot/dts/ucp1020.dts -new file mode 100644 -index 0000000..291e70a ---- /dev/null -+++ b/arch/powerpc/boot/dts/ucp1020.dts -@@ -0,0 +1,87 @@ -+/* -+ * uCP1020 Tree Source (32-bit address map) -+ * -+ * Copyright 2013-2016 Arcturus Networks Inc. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions are met: -+ * * Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * * Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * * Neither the name of Freescale Semiconductor nor the -+ * names of its contributors may be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * -+ * ALTERNATIVELY, this software may be distributed under the terms of the -+ * GNU General Public License ("GPL") as published by the Free Software -+ * Foundation, either version 2 of that License or (at your option) any -+ * later version. -+ * -+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY -+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY -+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+/include/ "fsl/p1020si-pre.dtsi" -+/ { -+ model = "arcturus,uCP1020"; -+ compatible = "arcturus,uCP1020"; -+ -+ memory { -+ device_type = "memory"; -+ }; -+ -+ lbc: localbus@ffe05000 { -+ reg = <0 0xffe05000 0 0x1000>; -+ -+ /* NOR Flash */ -+ ranges = <0x0 0x0 0x0 0xec000000 0x04000000>; -+ }; -+ -+ soc: soc@ffe00000 { -+ ranges = <0x0 0x0 0xffe00000 0x100000>; -+ }; -+ -+ pci0: pcie@ffe09000 { -+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 -+ 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; -+ reg = <0 0xffe09000 0 0x1000>; -+ pcie@0 { -+ ranges = <0x2000000 0x0 0xa0000000 -+ 0x2000000 0x0 0xa0000000 -+ 0x0 0x20000000 -+ -+ 0x1000000 0x0 0x0 -+ 0x1000000 0x0 0x0 -+ 0x0 0x100000>; -+ }; -+ }; -+ -+ pci1: pcie@ffe0a000 { -+ reg = <0 0xffe0a000 0 0x1000>; -+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 -+ 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; -+ pcie@0 { -+ ranges = <0x2000000 0x0 0x80000000 -+ 0x2000000 0x0 0x80000000 -+ 0x0 0x20000000 -+ -+ 0x1000000 0x0 0x0 -+ 0x1000000 0x0 0x0 -+ 0x0 0x100000>; -+ }; -+ }; -+}; -+ -+/include/ "ucp1020.dtsi" -+/include/ "fsl/p1020si-post.dtsi" -diff --git a/arch/powerpc/boot/dts/ucp1020.dtsi b/arch/powerpc/boot/dts/ucp1020.dtsi -new file mode 100644 -index 0000000..7cff949 ---- /dev/null -+++ b/arch/powerpc/boot/dts/ucp1020.dtsi -@@ -0,0 +1,211 @@ -+/* -+ * uCP1020 Device Tree Source stub (no addresses or top-level ranges) -+ * -+ * Copyright 2013-2016 Arcturus Networks Inc. -+ * -+ * Redistribution and use in source and binary forms, with or without -+ * modification, are permitted provided that the following conditions are met: -+ * * Redistributions of source code must retain the above copyright -+ * notice, this list of conditions and the following disclaimer. -+ * * Redistributions in binary form must reproduce the above copyright -+ * notice, this list of conditions and the following disclaimer in the -+ * documentation and/or other materials provided with the distribution. -+ * * Neither the name of Freescale Semiconductor nor the -+ * names of its contributors may be used to endorse or promote products -+ * derived from this software without specific prior written permission. -+ * -+ * -+ * ALTERNATIVELY, this software may be distributed under the terms of the -+ * GNU General Public License ("GPL") as published by the Free Software -+ * Foundation, either version 2 of that License or (at your option) any -+ * later version. -+ * -+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY -+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED -+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY -+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES -+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; -+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND -+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT -+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS -+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -+ */ -+ -+&lbc { -+ nor@0,0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "cfi-flash"; -+ reg = <0x0 0x0 0x04000000>; -+ bank-width = <2>; -+ device-width = <1>; -+ -+ partition@100000 { -+ /* 7MB - PART 0 */ -+ reg = <0x00100000 0x00700000>; -+ label = "0"; -+ }; -+ -+ partition@800000 { -+ /* 32MB - PART 1 */ -+ reg = <0x0800000 0x02000000>; -+ label = "1"; -+ }; -+ -+ partition@2800000 { -+ /* 8MB - PART 2 */ -+ reg = <0x02800000 0x00800000>; -+ label = "2"; -+ }; -+ -+ partition@3000000 { -+ /* (16MB - 512K) - PART 3 JFFS 2 */ -+ reg = <0x03000000 0x00f80000>; -+ label = "3"; -+ }; -+ -+ partition@0 { -+ /* 512KB - bootloader[u-boot, uCbootloader] */ -+ reg = <0x0 0x00080000>; -+ label = "BOOT_SPI"; -+ }; -+ -+ partition@3f80000 { -+ /* 512KB - bootloade NOR r[u-boot, uCbootloader] */ -+ reg = <0x03f80000 0x00080000>; -+ label = "B"; -+ }; -+ -+ partition@80000 { -+ /* 256KB - bootloaders environment (uCenv) */ -+ reg = <0x00080000 0x00040000>; -+ -+ label = "E"; -+ }; -+ -+ partition@C0000 { -+ /* 256KB - bootloaders environment (u-boot) */ -+ reg = <0x000C0000 0x00040000>; -+ label = "UENV"; -+ }; -+ }; -+}; -+ -+&soc { -+ i2c@3000 { -+ spoc@14 { -+ compatible = "conexant,cx2070x"; -+ reg = <0x14>; -+ }; -+ }; -+ -+ i2c@3100 { -+ dtt@4C { -+ compatible = "national,lm90"; -+ reg = <0x4C>; -+ }; -+ }; -+ -+ spi@7000 { -+ flash@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "winbond,w25q80bl"; -+ reg = <0>; -+ spi-max-frequency = <40000000>; /* input clock */ -+ -+ partition@0 { -+ label = "SPI MBR"; -+ reg = <0x00000000 0x00002000>; -+ read-only; -+ }; -+ partition@2000 { -+ label = "SPI ENV"; -+ reg = <0x00002000 0x00006000>; -+ read-only; -+ }; -+ partition@8000 { -+ label = "SPI FS"; -+ reg = <0x00008000 0x000F8000>; -+ }; -+ }; -+ flash@3 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "spansion,s25fl008k"; -+ reg = <3>; -+ spi-max-frequency = <40000000>; /* input clock */ -+ partition@0 { -+ label = "SPI USER"; -+ reg = <0x00000000 0x00100000>; -+ }; -+ }; -+ }; -+ -+ usb@22000 { -+ phy_type = "ulpi"; -+ dr_mode = "host"; -+ }; -+ -+ mdio@24000 { -+ phy0: ethernet-phy@4 { -+ interrupt-parent = <&mpic>; -+ interrupts = <4 1>; -+ reg = <0x04>; -+ }; -+ -+ phy1: ethernet-phy@6 { -+ interrupt-parent = <&mpic>; -+ interrupts = <8 1>; -+ reg = <0x6>; -+ }; -+ }; -+ -+ enet0: ethernet@b0000 { -+ phy-handle = <&phy0>; -+ phy-connection-type = "rgmii-id"; -+ }; -+ -+ enet1: ethernet@b1000 { -+ status = "disabled"; -+ }; -+ -+ enet2: ethernet@b2000 { -+ phy-handle = <&phy1>; -+ phy-connection-type = "rgmii-id"; -+ }; -+ -+ gpio0: gpio@f000 { -+ compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio"; -+ reg = <0xf000 0x1000>; -+ interrupts = <47 2>; -+ interrupt-parent = <&mpic>; -+ #gpio-cells = <2>; -+ gpio-controller; -+ }; -+ -+ gpio-leds { -+ compatible = "gpio-leds"; -+ gpio5 { -+ label = "led1"; /* LED15 */ -+ gpios = <&gpio0 5 0>; -+ }; -+ gpio12 { -+ label = "led2"; /* LED16 */ -+ gpios = <&gpio0 12 0>; -+ }; -+ gpio13 { -+ label = "led3"; /* LED17 */ -+ gpios = <&gpio0 13 0>; -+ }; -+ gpio7 { -+ label = "led4"; /* LED18 */ -+ gpios = <&gpio0 7 0>; -+ }; -+ gpio6 { -+ label = "led5"; /* LED19 */ -+ gpios = <&gpio0 6 0>; -+ }; -+ }; -+}; -diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig -index 2fb4b24..81a944f 100644 ---- a/arch/powerpc/platforms/85xx/Kconfig -+++ b/arch/powerpc/platforms/85xx/Kconfig -@@ -241,6 +241,13 @@ config SGY_CTS1000 - help - Enable this to support functionality in Servergy's CTS-1000 systems. - -+config UCP1020_SOM -+ bool "Arcturus uCP1020 Rev.1.3 System on Module" -+ select DEFAULT_UIMAGE -+ help -+ This option enables support for the Arcturus Networks Inc. -+ uCP1020 System on Module. -+ - config MVME2500 - bool "Artesyn MVME2500" - select DEFAULT_UIMAGE -diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile -index 1fe7fb9..84f2b9a 100644 ---- a/arch/powerpc/platforms/85xx/Makefile -+++ b/arch/powerpc/platforms/85xx/Makefile -@@ -31,4 +31,5 @@ obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o - obj-$(CONFIG_GE_IMP3A) += ge_imp3a.o - obj-$(CONFIG_PPC_QEMU_E500) += qemu_e500.o - obj-$(CONFIG_SGY_CTS1000) += sgy_cts1000.o -+obj-$(CONFIG_UCP1020_SOM) += ucp1020_som.o - obj-$(CONFIG_MVME2500) += mvme2500.o -diff --git a/arch/powerpc/platforms/85xx/ucp1020_som.c b/arch/powerpc/platforms/85xx/ucp1020_som.c -new file mode 100644 -index 0000000..777e8ad ---- /dev/null -+++ b/arch/powerpc/platforms/85xx/ucp1020_som.c -@@ -0,0 +1,92 @@ -+/* -+ * Arcturus Networks Inc. uCP1020 module Setup -+ * -+ * Copyright 2014-2016 Arcturus Networks Inc. -+ * -+ * by Oleksandr G Zhadan & Michael Durrant (www.ArcturusNetworks.com) -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include "smp.h" -+ -+#include "mpc85xx.h" -+ -+void __init ucp1020_som_pic_init(void) -+{ -+ struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | -+ MPIC_SINGLE_DEST_CPU, -+ 0, 256, " OpenPIC "); -+ -+ BUG_ON(mpic == NULL); -+ -+ mpic_init(mpic); -+} -+ -+/* -+ * Setup the architecture -+ */ -+static void __init ucp1020_som_setup_arch(void) -+{ -+ if (ppc_md.progress) -+ ppc_md.progress("uCP1020_SoM_setup_arch()", 0); -+ -+ mpc85xx_smp_init(); -+ -+ fsl_pci_assign_primary(); -+ pr_info("\n\t%s (http://www.arcturusnetworks.com)\n", ppc_md.name); -+} -+ -+machine_arch_initcall(ucp1020, mpc85xx_common_publish_devices); -+machine_arch_initcall(ucp1020, swiotlb_setup_bus_notifier); -+ -+/* -+ * Called very early, device-tree isn't unflattened -+ */ -+static int __init ucp1020_probe(void) -+{ -+ unsigned long root = of_get_flat_dt_root(); -+ -+ if (of_flat_dt_is_compatible(root, "arcturus,uCP1020")) -+ return 1; -+ return 0; -+} -+ -+define_machine(ucp1020) { -+ .name = "uCP1020 SoM - Arcturus Networks Inc.", -+ .probe = ucp1020_probe, -+ .setup_arch = ucp1020_som_setup_arch, -+ .init_IRQ = ucp1020_som_pic_init, -+#ifdef CONFIG_PCI -+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus, -+#endif -+ .get_irq = mpic_get_irq, -+ .restart = fsl_rstcr_restart, -+ .calibrate_decr = generic_calibrate_decr, -+#ifdef DEBUG -+ .progress = udbg_progress, -+#endif -+}; --- -2.1.4 - diff --git a/board/arcturus/ppc-ucp1020/patches/linux/0002-p1020-esdhc-controller-reserved-bit.patch b/board/arcturus/ppc-ucp1020/patches/linux/0002-p1020-esdhc-controller-reserved-bit.patch deleted file mode 100644 index 9694140f82..0000000000 --- a/board/arcturus/ppc-ucp1020/patches/linux/0002-p1020-esdhc-controller-reserved-bit.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 4c74fd1266287deca0c1ff091071c5b8558b9735 Mon Sep 17 00:00:00 2001 -From: Oleksandr G Zhadan -Date: Mon, 18 Jul 2016 10:45:41 -0400 -Subject: [PATCH 1/1] p1020 esdhc controller reserved bit - -Prevent SDHCI core from writing reserved bits, where -p1020 reserved bit is SDHCI_CTRL_HISPD, not 0x01(SDHCI_CTRL_LED). - -Signed-off-by: Oleksandr G Zhadan -Signed-off-by: Michael Durrant ---- - drivers/mmc/host/sdhci-esdhc.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/drivers/mmc/host/sdhci-esdhc.h b/drivers/mmc/host/sdhci-esdhc.h -index a870c42..b45de0a 100644 ---- a/drivers/mmc/host/sdhci-esdhc.h -+++ b/drivers/mmc/host/sdhci-esdhc.h -@@ -45,6 +45,6 @@ - #define ESDHC_DMA_SYSCTL 0x40c - #define ESDHC_DMA_SNOOP 0x00000040 - --#define ESDHC_HOST_CONTROL_RES 0x01 -+#define ESDHC_HOST_CONTROL_RES (SDHCI_CTRL_HISPD) - - #endif /* _DRIVERS_MMC_SDHCI_ESDHC_H */ --- -2.1.4 diff --git a/board/arcturus/ppc-ucp1020/patches/linux/0003-powerpc-ptrace-Fix-out-of-bounds-array-access-warning.patch b/board/arcturus/ppc-ucp1020/patches/linux/0003-powerpc-ptrace-Fix-out-of-bounds-array-access-warning.patch deleted file mode 100644 index aac15a121c..0000000000 --- a/board/arcturus/ppc-ucp1020/patches/linux/0003-powerpc-ptrace-Fix-out-of-bounds-array-access-warning.patch +++ /dev/null @@ -1,53 +0,0 @@ -From 35b7ce4f8f290794d3b89db7461e8c568b5defa1 Mon Sep 17 00:00:00 2001 -From: Khem Raj -Date: Mon, 25 Apr 2016 09:19:17 -0700 -Subject: powerpc/ptrace: Fix out of bounds array access warning - -commit 1e407ee3b21f981140491d5b8a36422979ca246f upstream. - -gcc-6 correctly warns about a out of bounds access - -arch/powerpc/kernel/ptrace.c:407:24: warning: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Warray-bounds] - offsetof(struct thread_fp_state, fpr[32][0])); - ^ - -check the end of array instead of beginning of next element to fix this - -Signed-off-by: Khem Raj -Cc: Kees Cook -Cc: Michael Ellerman -Cc: Segher Boessenkool -Tested-by: Aaro Koskinen -Acked-by: Olof Johansson -Cc: Arnd Bergmann -Signed-off-by: Michael Ellerman -Signed-off-by: Greg Kroah-Hartman -Signed-off-by: Oleksandr Zhadan ---- - arch/powerpc/kernel/ptrace.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - -diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c -index f21897b..93f200f 100644 ---- a/arch/powerpc/kernel/ptrace.c -+++ b/arch/powerpc/kernel/ptrace.c -@@ -376,7 +376,7 @@ static int fpr_get(struct task_struct *target, const struct user_regset *regset, - - #else - BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) != -- offsetof(struct thread_fp_state, fpr[32][0])); -+ offsetof(struct thread_fp_state, fpr[32])); - - return user_regset_copyout(&pos, &count, &kbuf, &ubuf, - &target->thread.fp_state, 0, -1); -@@ -404,7 +404,7 @@ static int fpr_set(struct task_struct *target, const struct user_regset *regset, - return 0; - #else - BUILD_BUG_ON(offsetof(struct thread_fp_state, fpscr) != -- offsetof(struct thread_fp_state, fpr[32][0])); -+ offsetof(struct thread_fp_state, fpr[32])); - - return user_regset_copyin(&pos, &count, &kbuf, &ubuf, - &target->thread.fp_state, 0, -1); --- -cgit v1.1 diff --git a/board/arcturus/ppc-ucp1020/readme.txt b/board/arcturus/ppc-ucp1020/readme.txt index c46fd80e7e..07986f50e0 100644 --- a/board/arcturus/ppc-ucp1020/readme.txt +++ b/board/arcturus/ppc-ucp1020/readme.txt @@ -38,6 +38,7 @@ You'll need to program the files created by buildroot into the NOR flash. B$ protect off 0xeff80000 +$filesize B$ erase 0xeff80000 +$filesize B$ cp.b $loadaddr 0xeff80000 $filesize + B$ protect on 0xeff80000 +$filesize 2. Program the kernel diff --git a/configs/arcturus_ucp1020_defconfig b/configs/arcturus_ucp1020_defconfig index cc1297ce1f..8b90f44750 100644 --- a/configs/arcturus_ucp1020_defconfig +++ b/configs/arcturus_ucp1020_defconfig @@ -2,8 +2,8 @@ BR2_powerpc=y BR2_powerpc_8548=y -# Linux headers same as kernel, a 4.1 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y +# Linux headers same as kernel, a 4.4 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y # System settings BR2_TARGET_GENERIC_HOSTNAME="UCP1020" @@ -13,11 +13,9 @@ BR2_SYSTEM_DHCP="eth0" # Kernel BR2_LINUX_KERNEL=y -BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.1.27" -BR2_LINUX_KERNEL_PATCH="board/arcturus/ppc-ucp1020/patches/linux" -BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/arcturus/ppc-ucp1020/configs/linux-4.1.x.config" +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,ArcturusNetworks,uCP1020-kernel,v20190618)/linux-v20190618.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="ucp1020" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="ucp1020" @@ -26,6 +24,7 @@ BR2_TARGET_ROOTFS_JFFS2=y # U-boot BR2_TARGET_UBOOT=y -BR2_TARGET_UBOOT_BOARDNAME="UCP1020" -BR2_TARGET_UBOOT_CUSTOM_VERSION=y -BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.07" +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,ArcturusNetworks,uCP1020-uboot,v20190618)/uboot-v20190618.tar.gz" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="UCP1020"