From: lkcl <lkcl@web>
Date: Sat, 30 Apr 2022 14:50:20 +0000 (+0100)
Subject: (no commit message)
X-Git-Tag: opf_rfc_ls005_v1~2538
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=446d4cbae13f22fea2a80f915c63b77ea3144205;p=libreriscv.git

---

diff --git a/openpower/sv/svp64/appendix.mdwn b/openpower/sv/svp64/appendix.mdwn
index 2871bd9bc..849ae216d 100644
--- a/openpower/sv/svp64/appendix.mdwn
+++ b/openpower/sv/svp64/appendix.mdwn
@@ -935,6 +935,75 @@ insert MV operations
 if necessary or desired, to give the level of efficiency or performance
 required.*
 
+# Element-width overrides
+
+    typedef union {
+        uint8_t  b;
+        uint16_t s;
+        uint32_t i;
+        uint64_t l;
+    } el_reg_t;
+
+    bw(elwidth):
+        if elwidth == 0: return xlen
+        if elwidth == 1: return 8
+        if elwidth == 2: return 16
+        // elwidth == 3:
+        return 32
+
+    get_max_elwidth(rs1, rs2):
+        return max(bw(int_csr[rs1].elwidth), # default (XLEN) if not set
+                   bw(int_csr[rs2].elwidth)) # again XLEN if no entry
+
+    get_polymorphed_reg(reg, bitwidth, offset):
+        el_reg_t res;
+        res.l = 0; // TODO: going to need sign-extending / zero-extending
+        if bitwidth == 8:
+            reg.b = int_regfile[reg].b[offset]
+        elif bitwidth == 16:
+            reg.s = int_regfile[reg].s[offset]
+        elif bitwidth == 32:
+            reg.i = int_regfile[reg].i[offset]
+        elif bitwidth == 64:
+            reg.l = int_regfile[reg].l[offset]
+        return res
+
+    set_polymorphed_reg(reg, bitwidth, offset, val):
+        if (!int_csr[reg].isvec):
+            # sign/zero-extend depending on opcode requirements, from
+            # the reg's bitwidth out to the full bitwidth of the regfile
+            val = sign_or_zero_extend(val, bitwidth, xlen)
+            int_regfile[reg].l[0] = val
+        elif bitwidth == 8:
+            int_regfile[reg].b[offset] = val
+        elif bitwidth == 16:
+            int_regfile[reg].s[offset] = val
+        elif bitwidth == 32:
+            int_regfile[reg].i[offset] = val
+        elif bitwidth == 64:
+            int_regfile[reg].l[offset] = val
+
+      maxsrcwid =  get_max_elwidth(rs1, rs2) # source element width(s)
+      destwid = int_csr[rs1].elwidth         # destination element width
+      for (i = 0; i < VL; i++)
+        if (predval & 1<<i) # predication uses intregs
+           // TODO, calculate if over-run occurs, for each elwidth
+           src1 = get_polymorphed_reg(rs1, maxsrcwid, irs1)
+           // TODO, sign/zero-extend src1 and src2 as operation requires
+           if (op_requires_sign_extend_src1)
+              src1 = sign_extend(src1, maxsrcwid)
+           src2 = get_polymorphed_reg(rs2, maxsrcwid, irs2)
+           result = src1 + src2 # actual add here
+           // TODO, sign/zero-extend result, as operation requires
+           if (op_requires_sign_extend_dest)
+              result = sign_extend(result, maxsrcwid)
+           set_polymorphed_reg(rd, destwid, ird, result)
+           if (!int_vec[rd].isvector) break
+        if (int_vec[rd ].isvector)  { id += 1; }
+        if (int_vec[rs1].isvector)  { irs1 += 1; }
+        if (int_vec[rs2].isvector)  { irs2 += 1; }
+
+
 # Twin (implicit) result operations
 
 Some operations in the Power ISA already target two 64-bit scalar