From: Fabio Estevam Date: Wed, 22 Nov 2017 13:21:12 +0000 (-0200) Subject: configs/imx6sx-sdb: Add new defconfig X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=459e3320dc234f96b93661bed1a753e477aeab17;p=buildroot.git configs/imx6sx-sdb: Add new defconfig Add support for imx6sx-sdb_defconfig that allows booting a mainline kernel and mainline U-Boot. Signed-off-by: Fabio Estevam Signed-off-by: Thomas Petazzoni --- diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index 5f859faa7e..a7a486551e 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -127,6 +127,7 @@ imx6-sabreauto_defconfig: *defconfig imx6-sabresd_defconfig: *defconfig imx6-sabresd_qt5_defconfig: *defconfig imx6slevk_defconfig: *defconfig +imx6sxsdb_defconfig: *defconfig imx6ulpico_defconfig: *defconfig imx7dpico_defconfig: *defconfig lego_ev3_defconfig: *defconfig diff --git a/DEVELOPERS b/DEVELOPERS index ad481f2409..df61a0138c 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -578,6 +578,7 @@ F: board/warp7/ F: configs/freescale_imx* F: configs/imx6-sabresd* F: configs/imx6slevk_defconfig +F: configs/imx6sxsdb_defconfig F: configs/imx6ulpico_defconfig F: configs/mx6cubox_defconfig F: configs/mx6sx_udoo_neo_defconfig diff --git a/board/freescale/imx6sxsdb/readme.txt b/board/freescale/imx6sxsdb/readme.txt new file mode 100644 index 0000000000..2779075f0b --- /dev/null +++ b/board/freescale/imx6sxsdb/readme.txt @@ -0,0 +1,14 @@ +NXP i.MX6SX SDB board +--------------------- + +To build a minimal support for this board: + +$ make imx6sx-sdb_defconfig +$ make + +Buildroot prepares a bootable "sdcard.img" image in the output/images/ +directory, ready to be flashed into the SD card: + +$ sudo dd if=output/images/sdcard.img of=/dev/; sync + +Then insert the SD card into the SD4 boot slot and boot the board. diff --git a/configs/imx6sx-sdb_defconfig b/configs/imx6sx-sdb_defconfig new file mode 100644 index 0000000000..baead34545 --- /dev/null +++ b/configs/imx6sx-sdb_defconfig @@ -0,0 +1,26 @@ +BR2_arm=y +BR2_cortex_a9=y +BR2_ARM_ENABLE_NEON=y +BR2_ARM_ENABLE_VFP=y +BR2_ARM_FPU_VFPV3=y +# Linux headers same as kernel, a 4.14 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_14=y +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARDNAME="mx6sxsabresd" +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.11" +BR2_TARGET_UBOOT_FORMAT_IMX=y +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.14" +BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6sx-sdb imx6sx-sdb-reva" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/common/imx/post-image.sh" +# required tools to create the SD card image +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y