From: Michael Meissner Date: Sat, 29 Nov 1997 01:14:58 +0000 (+0000) Subject: Fix problems with d30v addc/subb X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=465db791ec7944040587cdea97d2c673774c6f14;p=binutils-gdb.git Fix problems with d30v addc/subb --- diff --git a/sim/common/ChangeLog b/sim/common/ChangeLog index 5a508a05e6c..a8d4ea8abf6 100644 --- a/sim/common/ChangeLog +++ b/sim/common/ChangeLog @@ -1,3 +1,8 @@ +Fri Nov 28 20:10:09 1997 Michael Meissner + + * sim-alu.h (ALU{,8,16,32,64}_SET_CARRY): Provide macros to import + the carry bit from the CPU's psw. + Fri Nov 28 11:15:05 1997 Doug Evans * gennltvals.sh: Redo syscall support to allow sanitization. diff --git a/sim/common/sim-alu.h b/sim/common/sim-alu.h index 98bbfd288a5..e556dce0580 100644 --- a/sim/common/sim-alu.h +++ b/sim/common/sim-alu.h @@ -25,169 +25,364 @@ #include "sim-xcat.h" -/* 32bit target expressions: - Each calculation is performed three times using each of the - signed64, unsigned64 and long integer types. The macro ALU_END - (in _ALU_RESULT_VAL) then selects which of the three alternative - results will be used in the final assignment of the target - register. As this selection is determined at compile time by - fields in the instruction (OE, EA, Rc) the compiler has sufficient - information to firstly simplify the selection code into a single - case and then back anotate the equations and hence eliminate any - resulting dead code. That dead code being the calculations that, - as it turned out were not in the end needed. +/* Binary addition, carry and overflow: - 64bit arrithemetic is used firstly because it allows the use of - gcc's efficient long long operators (typically efficiently output - inline) and secondly because the resultant answer will contain in - the low 32bits the answer while in the high 32bits is either carry - or status information. */ + Overflow - method 1: + Overflow occures when the sign of the two operands is identical but + different to the sign of the result: -/* 16bit target expressions: + SIGN_BIT (~(a ^ b) & ((a + b) ^ b)) - These are a simplified version of the 32bit target expressions */ + Note that, for subtraction, care must be taken with MIN_INTn. + Overflow - method 2: -/* 64bit target expressions: + The two N bit operands are sign extended to M>N bits and then + added. Overflow occures when SIGN_BIT and SIGN_BIT do not + match. + + SIGN_BIT (r >> (M-N) ^ r) - Unfortunatly 128bit arrithemetic isn't that common. Consequently - the 32/64 bit trick can not be used. Instead all calculations are - required to retain carry/overflow information in separate - variables. Even with this restriction it is still possible for the - trick of letting the compiler discard the calculation of unneeded - values */ + Overflow - method 3: -/* Start a section of ALU code */ + The two N bit operands are sign extended to M>N bits and then + added. Overflow occures when the result is outside of signextended + MIN_INTn, MAX_INTn. -#define ALU16_BEGIN(VAL) \ -{ \ - signed_word alu_carry_val; \ - unsigned_word alu_overflow_val; \ - ALU16_SET(VAL) -#define ALU32_BEGIN(VAL) \ -{ \ - natural_word alu_val; \ - unsigned64 alu_carry_val; \ - signed64 alu_overflow_val; \ - ALU32_SET(VAL) + Overflow - method 4: + + Given the carry bit, the overflow can be computed using the + equation: + + SIGN_BIT (((A ^ B) ^ R) ^ C) + + As shown in the table below: + + I A B R C | V | A^B ^R ^C + ---------------+---+------------- + 0 0 0 0 0 | 0 | 0 0 0 + 0 0 1 1 0 | 0 | 1 0 0 + 0 1 0 1 0 | 0 | 1 0 0 + 0 1 1 0 1 | 1 | 0 0 1 + 1 0 0 1 0 | 1 | 0 1 1 + 1 0 1 0 1 | 0 | 1 1 0 + 1 1 0 0 1 | 0 | 1 1 0 + 1 1 1 1 1 | 0 | 0 1 0 + + + + Carry - method 1: + + Consider the truth table (carryIn, Result, Carryout, Result): + + I A B R | C + ------------+--- + 0 0 0 0 | 0 + 0 0 1 1 | 0 + 0 1 0 1 | 0 + 0 1 1 0 | 1 + 1 0 0 1 | 0 + 1 0 1 0 | 1 + 1 1 0 0 | 1 + 1 1 1 1 | 1 + + Looking at the terms A, B and R we want an equation for C. + + AB\R 0 1 + +------- + 00 | 0 0 + 01 | 1 0 + 11 | 1 1 + 10 | 1 0 + + This giving us the sum-of-prod equation: + + SIGN_BIT ((A & B) | (A & ~R) | (B & ~R)) + + Verifying: + + I A B R | C | A&B A&~R B&~R + ------------+---+--------------- + 0 0 0 0 | 0 | 0 0 0 + 0 0 1 1 | 0 | 0 0 0 + 0 1 0 1 | 0 | 0 0 0 + 0 1 1 0 | 1 | 1 1 1 + 1 0 0 1 | 0 | 0 0 0 + 1 0 1 0 | 1 | 0 0 1 + 1 1 0 0 | 1 | 0 1 0 + 1 1 1 1 | 1 | 1 0 0 + + + + Carry - method 2: + + Given two signed N bit numbers, a carry can be detected by treating + the numbers as N bit unsigned and adding them using M>N unsigned + arrithmetic. Carry is indicated by bit (1 << N) being set (result + >= 2**N). + + SIGN_BITm (r) -#define ALU64_BEGIN(VAL) \ -{ \ - natural64 alu_val; \ - unsigned64 alu_carry_val; \ - signed64 alu_overflow_val; \ - ALU64_SET(VAL) + Carry - method 3: -#define ALU_BEGIN(VAL) XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_BEGIN)(VAL) + Given the overflow bit. The carry can be computed from: -/* More basic alu operations */ + (~R&V) | (R&V) + Carry - method 4: + Add the two signed N bit numbers as unsigned N bit numbers, and then + compare the result to either one of the inputs via unsigned compare. + If the result is less than the inputs, carry occurred. + + C = ((unsigned)(a+b)) < (unsigned)a if adding + (or) + C = (unsigned)a < (unsigned)b if subtracting + */ + + + +/* 8 bit target expressions: + + Since the host's natural bitsize > 8 bits, carry method 2 and + overflow method 2 are used. */ + +#define ALU8_BEGIN(VAL) \ +signed alu8_cr = (unsigned8) (VAL); \ +unsigned alu8_vr = (signed8) (alu8_cr) + +#define ALU8_SET(VAL) \ +alu8_cr = (unsigned8) (VAL); \ +alu8_vr = (signed8) (alu8_cr) + +#define ALU8_SET_CARRY(CARRY) \ +do { \ + if (CARRY) \ + alu8_cr |= ((signed)-1) << 8; \ + else \ + alu8_cr &= 0xff; \ +} while (0) + +#define ALU8_HAD_CARRY (alu8_cr & LSBIT32(8)) +#define ALU8_HAD_OVERFLOW (((alu8_vr >> 8) ^ alu8_vr) & LSBIT32 (8-1)) + +#define ALU8_RESULT ((unsigned8) alu8_cr) +#define ALU8_CARRY_RESULT ((unsigned8) alu8_cr) +#define ALU8_OVERFLOW_RESULT ((unsigned8) alu8_vr) + +/* #define ALU8_END ????? - target dependant */ + + + +/* 16 bit target expressions: + + Since the host's natural bitsize > 16 bits, carry method 2 and + overflow method 2 are used. */ + +#define ALU16_BEGIN(VAL) \ +signed alu16_cr = (unsigned16) (VAL); \ +unsigned alu16_vr = (signed16) (alu16_cr) #define ALU16_SET(VAL) \ -do { \ - alu_carry_val = (unsigned16)(VAL); \ - alu_overflow_val = (signed16)(VAL); \ +alu16_cr = (unsigned16) (VAL); \ +alu16_vr = (signed16) (alu16_cr) + +#define ALU16_SET_CARRY(CARRY) \ +do { \ + if (CARRY) \ + alu16_cr |= ((signed)-1) << 16; \ + else \ + alu16_cr &= 0xffff; \ } while (0) +#define ALU16_HAD_CARRY (alu16_cr & LSBIT32(16)) +#define ALU16_HAD_OVERFLOW (((alu16_vr >> 16) ^ alu16_vr) & LSBIT32 (16-1)) + +#define ALU16_RESULT ((unsigned16) alu16_cr) +#define ALU16_CARRY_RESULT ((unsigned16) alu16_cr) +#define ALU16_OVERFLOW_RESULT ((unsigned16) alu16_vr) + +/* #define ALU16_END ????? - target dependant */ + + + +/* 32 bit target expressions: + + Since most hosts do not support 64 (> 32) bit arrithmetic, carry + method 4 and overflow method 4 are used. + + FIXME: 64 bit hosts should use the same method as for the 16 bit + ALU. */ + +#define ALU32_BEGIN(VAL) \ +unsigned32 alu32_r = (VAL); \ +int alu32_c = 0; \ +int alu32_v = 0 + #define ALU32_SET(VAL) \ -do { \ - alu_val = (unsigned32)(VAL); \ - alu_carry_val = (unsigned32)(alu_val); \ - alu_overflow_val = (signed32)(alu_val); \ -} while (0) +alu32_r = (VAL); \ +alu32_c = 0; \ +alu32_v = 0 + +#define ALU32_SET_CARRY(CARRY) alu32_c = (CARRY) + +#define ALU32_HAD_OVERFLOW (alu32_v) +#define ALU32_HAD_CARRY (alu32_c) + +#define ALU32_RESULT (alu32_r) +#define ALU32_CARRY_RESULT (alu32_r) +#define ALU32_OVERFLOW_RESULT (alu32_r) + + + +/* 64 bit target expressions: + + Even though the host typically doesn't support native 64 bit + arrithmetic, it is still used. */ + +#define ALU64_BEGIN(VAL) \ +natural64 alu64_r = (VAL); \ +int alu64_c = 0; \ +int alu64_v = 0 #define ALU64_SET(VAL) \ -do { \ - alu_val = (VAL); \ - alu_carry_val = ((unsigned64)alu_val) >> 32; \ - alu_overflow_val = ((signed64)alu_val) >> 32; \ -} while (0) +alu64_r = (VAL); \ +alu64_c = 0; \ +alu64_v = 0 + +#define ALU64_SET_CARRY(CARRY) alu64_c = (CARRY) + +#define ALU64_HAD_CARRY (alu64_c) +#define ALU64_HAD_OVERFLOW (alu64_v) + +#define ALU64_RESULT (alu64_r) +#define ALU64_CARRY_RESULT (alu64_r) +#define ALU64_OVERFLOW_RESULT (alu64_r) + + + +/* Generic versions of above macros */ + +#define ALU_BEGIN XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_BEGIN) +#define ALU_SET XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_SET) +#define ALU_SET_CARRY XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_SET_CARRY) + +#define ALU_HAD_OVERFLOW XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_HAD_OVERFLOW) +#define ALU_HAD_CARRY XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_HAD_CARRY) + +#define ALU_RESULT XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_RESULT) +#define ALU_OVERFLOW_RESULT XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_OVERFLOW_RESULT) +#define ALU_CARRY_RESULT XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_CARRY_RESULT) -#define ALU_SET(VAL) XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_SET)(VAL) +/* Basic operations */ -#define ALU16_ADD(VAL) \ -do { \ - alu_carry_val += (unsigned16)(VAL); \ - alu_overflow_val += (signed16)(VAL); \ +#define ALU8_ADD(VAL) \ +do { \ + unsigned8 alu8_tmp = (VAL); \ + alu8_cr += (unsigned8)(alu8_tmp); \ + alu8_vr += (signed8)(alu8_tmp); \ } while (0) -#define ALU32_ADD(VAL) \ -do { \ - alu_val += (VAL); \ - alu_carry_val += (unsigned32)(VAL); \ - alu_overflow_val += (signed32)(VAL); \ +#define ALU16_ADD(VAL) \ +do { \ + unsigned16 alu16_tmp = (VAL); \ + alu16_cr += (unsigned16)(alu16_tmp); \ + alu16_vr += (signed16)(alu16_tmp); \ } while (0) -#define ALU64_ADD(VAL) \ -do { \ - unsigned64 val = (VAL); \ - unsigned64 alu_lo = alu_val + val; \ - signed alu_carry = ((alu_lo & LSBIT64 (31)) != 0); \ - alu_carry_val = (alu_carry_val \ - + MSEXTRACTED64 (val, 0, 31) \ - + alu_carry); \ - alu_overflow_val = (alu_overflow_val \ - + MSEXTRACTED64 (val, 0, 31) \ - + alu_carry); \ - alu_val = alu_val + val; \ +#define ALU32_ADD(VAL) \ +do { \ + unsigned32 alu32_tmp = (unsigned32) (VAL); \ + unsigned32 alu32_sign = alu32_tmp ^ alu32_r; \ + alu32_r += (alu32_tmp); \ + alu32_c = (alu32_r < alu32_tmp); \ + alu32_v = ((alu32_sign ^ - (unsigned32)alu32_c) ^ alu32_r) >> 31; \ +} while (0) + +#define ALU64_ADD(VAL) \ +do { \ + unsigned64 alu64_tmp = (unsigned64) (VAL); \ + unsigned64 alu64_sign = alu64_tmp ^ alu64_r; \ + alu64_r += (alu64_tmp); \ + alu64_c = (alu64_r < alu64_tmp); \ + alu64_v = ((alu64_sign ^ - (unsigned64)alu64_c) ^ alu64_r) >> 63; \ } while (0) #define ALU_ADD(VAL) XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_ADD)(VAL) +#define ALU8_ADD_CA(VAL) \ +do { \ + unsigned8 alu8_ca_tmp = (VAL) + ALU8_HAD_CARRY; \ + ALU8_ADD(alu8_ca_tmp); \ +} while (0) -#define ALU16_ADD_CA \ -do { \ - signed carry = ALU_CARRY; \ - ALU16_ADD(carry); \ +#define ALU16_ADD_CA(VAL) \ +do { \ + unsigned16 alu16_ca_tmp = (VAL) + ALU16_HAD_CARRY; \ + ALU16_ADD(alu16_ca_tmp); \ } while (0) -#define ALU32_ADD_CA \ -do { \ - signed carry = ALU_CARRY; \ - ALU32_ADD(carry); \ +#define ALU32_ADD_CA(VAL) \ +do { \ + unsigned32 alu32_ca_tmp = (VAL) + ALU32_HAD_CARRY; \ + ALU32_ADD(alu32_ca_tmp); \ } while (0) -#define ALU64_ADD_CA \ -do { \ - signed carry = ALU_CARRY; \ - ALU64_ADD(carry); \ +#define ALU64_ADD_CA(VAL) \ +do { \ + unsigned64 alu64_ca_tmp = (VAL) + ALU64_HAD_CARRY; \ + ALU64_ADD(alu64_ca_tmp); \ } while (0) -#define ALU_ADD_CA XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_ADD_CA) +#define ALU_ADD_CA(VAL) XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_ADD_CA)(VAL) +/* Remember: Hardware implements subtract as an ADD with a carry in of + 1 into the least significant bit */ -#define ALU16_SUB(VAL) \ -do { \ - alu_carry_val -= (unsigned16)(VAL); \ - alu_overflow_val -= (signed16)(VAL); \ +#define ALU8_SUB(VAL) \ +do { \ + signed alu8sub_val = ~(VAL); \ + ALU8_ADD (alu8sub_val); \ + ALU8_ADD (1); \ } while (0) -#define ALU32_SUB(VAL) \ -do { \ - alu_val -= (VAL); \ - alu_carry_val -= (unsigned32)(VAL); \ - alu_overflow_val -= (signed32)(VAL); \ +#define ALU16_SUB(VAL) \ +do { \ + signed alu16sub_val = ~(VAL); \ + ALU16_ADD (alu16sub_val); \ + ALU16_ADD (1); \ } while (0) -#define ALU64_SUB(VAL) \ -do { \ - signed64 subval = -(VAL); /* -MININT? */ \ - ALU64_ADD (subval); \ +#define ALU32_SUB(VAL) \ +do { \ + unsigned32 alu32_tmp = (unsigned32) (VAL); \ + unsigned32 alu32_sign = alu32_tmp ^ alu32_r; \ + alu32_c = (alu32_r < alu32_tmp); \ + alu32_r -= (alu32_tmp); \ + alu32_v = ((alu32_sign ^ - (unsigned32)alu32_c) ^ alu32_r) >> 31; \ +} while (0) + +#define ALU64_SUB(VAL) \ +do { \ + unsigned64 alu64_tmp = (unsigned64) (VAL); \ + unsigned64 alu64_sign = alu64_tmp ^ alu64_r; \ + alu64_c = (alu64_r < alu64_tmp); \ + alu64_r -= (alu64_tmp); \ + alu64_v = ((alu64_sign ^ - (unsigned64)alu64_c) ^ alu64_r) >> 63; \ } while (0) #define ALU_SUB(VAL) XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_SUB)(VAL) @@ -195,66 +390,74 @@ do { \ -#define ALU16_SUB_CA \ -do { \ - signed carry = ALU_CARRY; \ - ALU16_SUB(carry); \ +#define ALU8_SUB_CA(VAL) \ +do { \ + unsigned8 alu8_ca_tmp = (VAL) + ALU8_HAD_CARRY; \ + ALU8_SUB(alu8_ca_tmp); \ } while (0) -#define ALU32_SUB_CA \ -do { \ - signed carry = ALU_CARRY; \ - ALU32_SUB(carry); \ +#define ALU16_SUB_CA(VAL) \ +do { \ + unsigned16 alu16_ca_tmp = (VAL) + ALU16_HAD_CARRY; \ + ALU16_SUB(alu16_ca_tmp); \ } while (0) -#define ALU64_SUB_CA \ -do { \ - signed carry = ALU_CARRY; \ - ALU64_SUB(carry); \ +#define ALU32_SUB_CA(VAL) \ +do { \ + unsigned32 alu32_ca_tmp = (VAL) + ALU32_HAD_CARRY; \ + ALU32_SUB(alu32_ca_tmp); \ } while (0) -#define ALU_SUB_CA XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_SUB_CA) +#define ALU64_SUB_CA(VAL) \ +do { \ + unsigned64 alu64_ca_tmp = (VAL) + ALU64_HAD_CARRY; \ + ALU64_SUB(alu64_ca_tmp); \ +} while (0) +#define ALU_SUB_CA(VAL) XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_SUB_CA)(VAL) -#define ALU16_OR(VAL) \ -do { \ - error("ALU16_OR"); \ +#define ALU16_OR(VAL) \ +do { \ + error("ALU16_OR"); \ } while (0) -#define ALU32_OR(VAL) \ -do { \ - alu_val |= (VAL); \ - alu_carry_val = (unsigned32)(alu_val); \ - alu_overflow_val = (signed32)(alu_val); \ +#define ALU32_OR(VAL) \ +do { \ + alu32_r |= (VAL); \ + alu32_c = 0; \ + alu32_v = 0; \ } while (0) -#define ALU64_OR(VAL) \ -do { \ - error("ALU_OR64"); \ +#define ALU64_OR(VAL) \ +do { \ + alu64_r |= (VAL); \ + alu64_c = 0; \ + alu64_v = 0; \ } while (0) #define ALU_OR(VAL) XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_OR)(VAL) - -#define ALU16_XOR(VAL) \ -do { \ - error("ALU16_XOR"); \ +#define ALU16_XOR(VAL) \ +do { \ + error("ALU16_XOR"); \ } while (0) -#define ALU32_XOR(VAL) \ -do { \ - alu_val ^= (VAL); \ - alu_carry_val = (unsigned32)(alu_val); \ - alu_overflow_val = (signed32)(alu_val); \ +#define ALU32_XOR(VAL) \ +do { \ + alu32_r ^= (VAL); \ + alu32_c = 0; \ + alu32_v = 0; \ } while (0) -#define ALU64_XOR(VAL) \ -do { \ - error("ALU_XOR64"); \ +#define ALU64_XOR(VAL) \ +do { \ + alu64_r ^= (VAL); \ + alu64_c = 0; \ + alu64_v = 0; \ } while (0) #define ALU_XOR(VAL) XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_XOR)(VAL) @@ -262,21 +465,32 @@ do { \ -#define ALU16_NEGATE \ -do { \ - error("ALU_NEGATE16"); \ +#define ALU8_NEGATE() \ +do { \ + signed alu8neg_val = ~(ALU8_RESULT); \ + ALU8_SET (1); \ + ALU8_ADD (alu8neg_val); \ +} while (0) + +#define ALU16_NEGATE() \ +do { \ + signed alu16neg_val = ~(ALU16_RESULT); \ + ALU16_SET (1); \ + ALU16_ADD (alu16neg_val); \ } while (0) -#define ALU32_NEGATE \ -do { \ - alu_val = -alu_val; \ - alu_carry_val = -alu_carry_val; \ - alu_overflow_val = -alu_overflow_val; \ +#define ALU32_NEGATE() \ +do { \ + unsigned32 alu32_tmp_orig = alu32_r; \ + ALU32_SET (0); \ + ALU32_SUB (alu32_tmp_orig); \ } while(0) -#define ALU64_NEGATE \ -do { \ - error("ALU_NEGATE64"); \ +#define ALU64_NEGATE() \ +do { \ + unsigned64 alu64_tmp_orig = alu64_r; \ + ALU64_SET (0); \ + ALU64_SUB (alu64_tmp_orig); \ } while (0) #define ALU_NEGATE XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_NEGATE) @@ -284,21 +498,23 @@ do { \ -#define ALU16_AND(VAL) \ -do { \ - error("ALU_AND16"); \ +#define ALU16_AND(VAL) \ +do { \ + error("ALU_AND16"); \ } while (0) -#define ALU32_AND(VAL) \ -do { \ - alu_val &= (VAL); \ - alu_carry_val = (unsigned32)(alu_val); \ - alu_overflow_val = (signed32)(alu_val); \ +#define ALU32_AND(VAL) \ +do { \ + alu32_r &= (VAL); \ + alu32_r = 0; \ + alu32_v = 0; \ } while (0) -#define ALU64_AND(VAL) \ -do { \ - error("ALU_AND64"); \ +#define ALU64_AND(VAL) \ +do { \ + alu64_r &= (VAL); \ + alu64_r = 0; \ + alu64_v = 0; \ } while (0) #define ALU_AND(VAL) XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_AND)(VAL) @@ -306,51 +522,25 @@ do { \ -#define ALU16_NOT(VAL) \ -do { \ - error("ALU_NOT16"); \ +#define ALU16_NOT(VAL) \ +do { \ + error("ALU_NOT16"); \ } while (0) -#define ALU32_NOT \ -do { \ - signed64 new_alu_val = ~alu_val; \ - ALU_SET(new_alu_val); \ +#define ALU32_NOT \ +do { \ + alu32_r = ~alu32_r; \ + alu32_c = 0; \ + alu32_v = 0; \ } while (0) -#define ALU64_NOT \ -do { \ - error("ALU_NOT64"); \ +#define ALU64_NOT \ +do { \ + alu64_r = ~alu64_r; \ + alu64_c = 0; \ + alu64_v = 0; \ } while (0) #define ALU_NOT XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_NOT) - - -/* Make available various results */ - - -/* overflow occures if the sign bit differs from the carry bit */ - -#define ALU16_HAD_OVERFLOW \ - (!(alu_overflow_val & MSBIT32 (0)) != !(alu_overflow_val & MSBIT32 (16))) - -#define ALU32_HAD_OVERFLOW \ - ((((unsigned64)(alu_overflow_val & MSBIT64(0))) >> 32) \ - != (unsigned64)(alu_overflow_val & MSBIT64(32))) - -#define ALU64_HAD_OVERFLOW \ - ((alu_val & MSBIT64 (0)) != (alu_overflow_val & MSBIT64 (0))) - -#define ALU_HAD_OVERFLOW XCONCAT3(ALU,WITH_TARGET_WORD_BITSIZE,_HAD_OVERFLOW) - - -/* carry found in bit before sign */ - -#define ALU16_HAD_CARRY \ - (alu_carry_val & MSBIT32(16)) - -#define ALU32_HAD_CARRY \ - (alu_carry_val & MSBIT64(31)) - - #endif