From: Simon Marchi Date: Thu, 17 Nov 2016 17:02:32 +0000 (-0500) Subject: Makefile: Replace explicit subdir rules with pattern rules X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=470dd0a647c95a2e88c5b0f8df538826b08959a8;p=binutils-gdb.git Makefile: Replace explicit subdir rules with pattern rules When adding a .c file in subdirectory (e.g. mi/), the current practice is to add an explicit rule, such as: mi-cmd-break.o: $(srcdir)/mi/mi-cmd-break.c $(COMPILE) $(srcdir)/mi/mi-cmd-break.c $(POSTCOMPILE) I find it a bit verbose and cumbersome. Since we now require GNU make, we can change those rules with pattern rules, one for each subdirectory. For example, the following rule works for all files under mi: %.o: $(srcdir)/mi/%.c $(COMPILE) $< $(POSTCOMPILE) Those pattern rules assume that the source and target files have the same stem (foo.c and foo.o). In one case, common-agent.o is generated from common/agent.c, to avoid a conflict with the agent.o in gdb/. In this case, I kept the explicit rule, which takes precedence over the pattern rule. We could also rename common/agent.c to common/common-agent.c to get rid of the special case and still avoid the clash, as it is done with common/common-regcache.c, for example. This strategy was the least intrusive I found, as it only requires changing the rules, not the target names. I also considered two other solutions, which I did not like because I would have had to change target names a bit everywhere. - Replicate the source directory structure in the build directory, which would generate common/agent.o from common/agent.c. However, something was not right with the dependency tracking (the .deps directory). It's probably not hard to fix, but I did not investigate further. - Name the object files after the directory they are in, so that common/agent.c would generate common_agent.c. GDBserver can benefit from the same treatment, but I'll do it in another patch. Built-tested with --enable-targets=all. New in v2: - Regroup pattern rules for .c -> .o compilation in a single place. - Add comment about common-agent.o. gdb/ChangeLog: (PYTHON_CFLAGS): Move up. (%.o: $(srcdir)/arch/%.c): New rule. (%.o: $(srcdir)/cli/%.c): New rule. (%.o: $(srcdir)/common/%.c): New rule. (%.o: $(srcdir)/compile/%.c): New rule. (%.o: $(srcdir)/gdbtk/generic/%.c): New rule. (%.o: $(srcdir)/guile/%.c): New rule. (%.o: $(srcdir)/mi/%.c): New rule. (%.o: $(srcdir)/nat/%.c): New rule. (%.o: $(srcdir)/python/%.c): New rule. (%.o: $(srcdir)/target/%.c): New rule. (%.o: $(srcdir)/tui/%.c): New rule. (cli-cmds.o): Remove. (cli-decode.o): Likewise. (cli-dump.o): Likewise. (cli-interp.o): Likewise. (cli-logging.o): Likewise. (cli-script.o): Likewise. (cli-setshow.o): Likewise. (cli-utils.o): Likewise. (compile.o): Likewise. (compile-c-types.o): Likewise. (compile-c-symbols.o): Likewise. (compile-object-load.o): Likewise. (compile-object-run.o): Likewise. (compile-loc2c.o): Likewise. (compile-c-support.o): Likewise. (gdbtk.o): Likewise. (gdbtk-bp.o): Likewise. (gdbtk-cmds.o): Likewise. (gdbtk-hooks.o): Likewise. (gdbtk-interp.o): Likewise. (gdbtk-main.o): Likewise. (gdbtk-register.o): Likewise. (gdbtk-stack.o): Likewise. (gdbtk-varobj.o): Likewise. (gdbtk-wrapper.o): Likewise. (mi-cmd-break.o): Likewise. (mi-cmd-catch.o): Likewise. (mi-cmd-disas.o): Likewise. (mi-cmd-env.o): Likewise. (mi-cmd-file.o): Likewise. (mi-cmd-info.o): Likewise. (mi-cmds.o): Likewise. (mi-cmd-stack.o): Likewise. (mi-cmd-target.o): Likewise. (mi-cmd-var.o): Likewise. (mi-console.o): Likewise. (mi-getopt.o): Likewise. (mi-interp.o): Likewise. (mi-main.o): Likewise. (mi-out.o): Likewise. (mi-parse.o): Likewise. (mi-symbol-cmds.o): Likewise. (mi-common.o): Likewise. (signals.o): Likewise. (common-utils.o): Likewise. (gdb_vecs.o): Likewise. (xml-utils.o): Likewise. (ptid.o): Likewise. (buffer.o): Likewise. (filestuff.o): Likewise. (format.o): Likewise. (vec.o): Likewise. (print-utils.o): Likewise. (rsp-low.o): Likewise. (errors.o): Likewise. (common-debug.o): Likewise. (cleanups.o): Likewise. (common-exceptions.o (posix-strerror.o): Likewise. (mingw-strerror.o): Likewise. (btrace-common.o): Likewise. (fileio.o): Likewise. (common-regcache.o): Likewise. (signals-state-save-restore.o): Likewise. (new-op.o): Likewise. (waitstatus.o): Likewise. (arm.o): Likewise. (arm-linux.o): Likewise. (arm-get-next-pcs.o): Likewise. (x86-dregs.o): Likewise. (linux-btrace.o): Likewise. (linux-osdata.o): Likewise. (linux-procfs.o): Likewise. (linux-ptrace.o): Likewise. (linux-waitpid.o): Likewise. (mips-linux-watch.o): Likewise. (ppc-linux.o): Likewise. (linux-personality.o): Likewise. (x86-linux.o): Likewise. (x86-linux-dregs.o): Likewise. (amd64-linux-siginfo.o): Likewise. (linux-namespaces.o): Likewise. (aarch64-linux-hw-point.o): Likewise. (aarch64-linux.o): Likewise. (aarch64-insn.o): Likewise. (tui.o): Likewise. (tui-command.o): Likewise. (tui-data.o): Likewise. (tui-disasm.o): Likewise. (tui-file.o): Likewise. (tui-hooks.o): Likewise. (tui-interp.o): Likewise. (tui-io.o): Likewise. (tui-layout.o): Likewise. (tui-out.o): Likewise. (tui-regs.o): Likewise. (tui-source.o): Likewise. (tui-stack.o): Likewise. (tui-win.o): Likewise. (tui-windata.o): Likewise. (tui-wingeneral.o): Likewise. (tui-winsource.o): Likewise. (guile.o): Likewise. (scm-arch.o): Likewise. (scm-auto-load.o): Likewise. (scm-block.o): Likewise. (scm-breakpoint.o): Likewise. (scm-cmd.o): Likewise. (scm-disasm.o): Likewise. (scm-exception.o): Likewise. (scm-frame.o): Likewise. (scm-gsmob.o): Likewise. (scm-iterator.o): Likewise. (scm-lazy-string.o): Likewise. (scm-math.o): Likewise. (scm-objfile.o): Likewise. (scm-param.o): Likewise. (scm-ports.o): Likewise. (scm-pretty-print.o): Likewise. (scm-progspace.o): Likewise. (scm-safe-call.o): Likewise. (scm-string.o): Likewise. (scm-symbol.o): Likewise. (scm-symtab.o): Likewise. (scm-type.o): Likewise. (scm-utils.o): Likewise. (scm-value.o): Likewise. (python.o): Likewise. (py-arch.o): Likewise. (py-auto-load.o): Likewise. (py-block.o): Likewise. (py-bpevent.o): Likewise. (py-breakpoint.o): Likewise. (py-cmd.o): Likewise. (py-continueevent.o): Likewise. (py-xmethods.o): Likewise. (py-event.o): Likewise. (py-evtregistry.o): Likewise. (py-evts.o): Likewise. (py-exitedevent.o): Likewise. (py-finishbreakpoint.o): Likewise. (py-frame.o): Likewise. (py-framefilter.o): Likewise. (py-function.o): Likewise. (py-gdb-readline.o): Likewise. (py-inferior.o): Likewise. (py-infevents.o): Likewise. (py-infthread.o): Likewise. (py-lazy-string.o): Likewise. (py-linetable.o): Likewise. (py-newobjfileevent.o): Likewise. (py-objfile.o): Likewise. (py-param.o): Likewise. (py-prettyprint.o): Likewise. (py-progspace.o): Likewise. (py-signalevent.o): Likewise. (py-stopevent.o): Likewise. (py-symbol.o): Likewise. (py-symtab.o): Likewise. (py-threadevent.o): Likewise. (py-type.o): Likewise. (py-unwind.o): Likewise. (py-utils.o): Likewise. (py-value.o): Likewise. (py-varobj.o): Likewise. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 3585b326813..07b564b8b24 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,183 @@ +2016-11-17 Simon Marchi + + (PYTHON_CFLAGS): Move up. + (%.o: $(srcdir)/arch/%.c): New rule. + (%.o: $(srcdir)/cli/%.c): New rule. + (%.o: $(srcdir)/common/%.c): New rule. + (%.o: $(srcdir)/compile/%.c): New rule. + (%.o: $(srcdir)/gdbtk/generic/%.c): New rule. + (%.o: $(srcdir)/guile/%.c): New rule. + (%.o: $(srcdir)/mi/%.c): New rule. + (%.o: $(srcdir)/nat/%.c): New rule. + (%.o: $(srcdir)/python/%.c): New rule. + (%.o: $(srcdir)/target/%.c): New rule. + (%.o: $(srcdir)/tui/%.c): New rule. + (cli-cmds.o): Remove. + (cli-decode.o): Likewise. + (cli-dump.o): Likewise. + (cli-interp.o): Likewise. + (cli-logging.o): Likewise. + (cli-script.o): Likewise. + (cli-setshow.o): Likewise. + (cli-utils.o): Likewise. + (compile.o): Likewise. + (compile-c-types.o): Likewise. + (compile-c-symbols.o): Likewise. + (compile-object-load.o): Likewise. + (compile-object-run.o): Likewise. + (compile-loc2c.o): Likewise. + (compile-c-support.o): Likewise. + (gdbtk.o): Likewise. + (gdbtk-bp.o): Likewise. + (gdbtk-cmds.o): Likewise. + (gdbtk-hooks.o): Likewise. + (gdbtk-interp.o): Likewise. + (gdbtk-main.o): Likewise. + (gdbtk-register.o): Likewise. + (gdbtk-stack.o): Likewise. + (gdbtk-varobj.o): Likewise. + (gdbtk-wrapper.o): Likewise. + (mi-cmd-break.o): Likewise. + (mi-cmd-catch.o): Likewise. + (mi-cmd-disas.o): Likewise. + (mi-cmd-env.o): Likewise. + (mi-cmd-file.o): Likewise. + (mi-cmd-info.o): Likewise. + (mi-cmds.o): Likewise. + (mi-cmd-stack.o): Likewise. + (mi-cmd-target.o): Likewise. + (mi-cmd-var.o): Likewise. + (mi-console.o): Likewise. + (mi-getopt.o): Likewise. + (mi-interp.o): Likewise. + (mi-main.o): Likewise. + (mi-out.o): Likewise. + (mi-parse.o): Likewise. + (mi-symbol-cmds.o): Likewise. + (mi-common.o): Likewise. + (signals.o): Likewise. + (common-utils.o): Likewise. + (gdb_vecs.o): Likewise. + (xml-utils.o): Likewise. + (ptid.o): Likewise. + (buffer.o): Likewise. + (filestuff.o): Likewise. + (format.o): Likewise. + (vec.o): Likewise. + (print-utils.o): Likewise. + (rsp-low.o): Likewise. + (errors.o): Likewise. + (common-debug.o): Likewise. + (cleanups.o): Likewise. + (common-exceptions.o + (posix-strerror.o): Likewise. + (mingw-strerror.o): Likewise. + (btrace-common.o): Likewise. + (fileio.o): Likewise. + (common-regcache.o): Likewise. + (signals-state-save-restore.o): Likewise. + (new-op.o): Likewise. + (waitstatus.o): Likewise. + (arm.o): Likewise. + (arm-linux.o): Likewise. + (arm-get-next-pcs.o): Likewise. + (x86-dregs.o): Likewise. + (linux-btrace.o): Likewise. + (linux-osdata.o): Likewise. + (linux-procfs.o): Likewise. + (linux-ptrace.o): Likewise. + (linux-waitpid.o): Likewise. + (mips-linux-watch.o): Likewise. + (ppc-linux.o): Likewise. + (linux-personality.o): Likewise. + (x86-linux.o): Likewise. + (x86-linux-dregs.o): Likewise. + (amd64-linux-siginfo.o): Likewise. + (linux-namespaces.o): Likewise. + (aarch64-linux-hw-point.o): Likewise. + (aarch64-linux.o): Likewise. + (aarch64-insn.o): Likewise. + (tui.o): Likewise. + (tui-command.o): Likewise. + (tui-data.o): Likewise. + (tui-disasm.o): Likewise. + (tui-file.o): Likewise. + (tui-hooks.o): Likewise. + (tui-interp.o): Likewise. + (tui-io.o): Likewise. + (tui-layout.o): Likewise. + (tui-out.o): Likewise. + (tui-regs.o): Likewise. + (tui-source.o): Likewise. + (tui-stack.o): Likewise. + (tui-win.o): Likewise. + (tui-windata.o): Likewise. + (tui-wingeneral.o): Likewise. + (tui-winsource.o): Likewise. + (guile.o): Likewise. + (scm-arch.o): Likewise. + (scm-auto-load.o): Likewise. + (scm-block.o): Likewise. + (scm-breakpoint.o): Likewise. + (scm-cmd.o): Likewise. + (scm-disasm.o): Likewise. + (scm-exception.o): Likewise. + (scm-frame.o): Likewise. + (scm-gsmob.o): Likewise. + (scm-iterator.o): Likewise. + (scm-lazy-string.o): Likewise. + (scm-math.o): Likewise. + (scm-objfile.o): Likewise. + (scm-param.o): Likewise. + (scm-ports.o): Likewise. + (scm-pretty-print.o): Likewise. + (scm-progspace.o): Likewise. + (scm-safe-call.o): Likewise. + (scm-string.o): Likewise. + (scm-symbol.o): Likewise. + (scm-symtab.o): Likewise. + (scm-type.o): Likewise. + (scm-utils.o): Likewise. + (scm-value.o): Likewise. + (python.o): Likewise. + (py-arch.o): Likewise. + (py-auto-load.o): Likewise. + (py-block.o): Likewise. + (py-bpevent.o): Likewise. + (py-breakpoint.o): Likewise. + (py-cmd.o): Likewise. + (py-continueevent.o): Likewise. + (py-xmethods.o): Likewise. + (py-event.o): Likewise. + (py-evtregistry.o): Likewise. + (py-evts.o): Likewise. + (py-exitedevent.o): Likewise. + (py-finishbreakpoint.o): Likewise. + (py-frame.o): Likewise. + (py-framefilter.o): Likewise. + (py-function.o): Likewise. + (py-gdb-readline.o): Likewise. + (py-inferior.o): Likewise. + (py-infevents.o): Likewise. + (py-infthread.o): Likewise. + (py-lazy-string.o): Likewise. + (py-linetable.o): Likewise. + (py-newobjfileevent.o): Likewise. + (py-objfile.o): Likewise. + (py-param.o): Likewise. + (py-prettyprint.o): Likewise. + (py-progspace.o): Likewise. + (py-signalevent.o): Likewise. + (py-stopevent.o): Likewise. + (py-symbol.o): Likewise. + (py-symtab.o): Likewise. + (py-threadevent.o): Likewise. + (py-type.o): Likewise. + (py-unwind.o): Likewise. + (py-utils.o): Likewise. + (py-value.o): Likewise. + (py-varobj.o): Likewise. + 2016-11-17 Simon Marchi * Makefile.in (.c.o): Replace rule with ... diff --git a/gdb/Makefile.in b/gdb/Makefile.in index fe10a8de908..1d6da4b02d4 100644 --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -1122,12 +1122,66 @@ DISTSTUFF = $(YYFILES) generated_files = config.h observer.h observer.inc ada-lex.c jit-reader.h \ $(GNULIB_H) $(NAT_GENERATED_FILES) gcore +# Flags needed to compile Python code +PYTHON_CFLAGS=@PYTHON_CFLAGS@ + +all: gdb$(EXEEXT) $(CONFIG_ALL) + @$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do + +# Rule for compiling .c files in the top-level gdb directory. %.o: %.c $(COMPILE) $< $(POSTCOMPILE) -all: gdb$(EXEEXT) $(CONFIG_ALL) - @$(MAKE) $(FLAGS_TO_PASS) DO=all "DODIRS=`echo $(SUBDIRS) | sed 's/testsuite//'`" subdir_do +# Rules for compiling .c files in the various source subdirectories. +%.o: ${srcdir}/arch/%.c + $(COMPILE) $< + $(POSTCOMPILE) + +%.o: $(srcdir)/cli/%.c + $(COMPILE) $< + $(POSTCOMPILE) + +%.o: ${srcdir}/common/%.c + $(COMPILE) $< + $(POSTCOMPILE) + +%.o: $(srcdir)/compile/%.c + $(COMPILE) $< + $(POSTCOMPILE) + +%.o: $(srcdir)/gdbtk/generic/%.c + $(COMPILE) $(all_gdbtk_cflags) %< + $(POSTCOMPILE) + +%.o: $(srcdir)/guile/%.c + $(COMPILE) $< + $(POSTCOMPILE) + +%.o: $(srcdir)/mi/%.c + $(COMPILE) $< + +%.o: ${srcdir}/nat/%.c + $(COMPILE) $< + $(POSTCOMPILE) + +%.o: $(srcdir)/python/%.c + $(COMPILE) $(PYTHON_CFLAGS) $< + $(POSTCOMPILE) + +%.o: ${srcdir}/target/%.c + $(COMPILE) $< + $(POSTCOMPILE) + +%.o: $(srcdir)/tui/%.c + $(COMPILE) $< + $(POSTCOMPILE) + +# Specify an explicit rule for gdb/common/agent.c, to avoid a clash with the +# object file generate by gdb/agent.c. +common-agent.o: $(srcdir)/common/agent.c + $(COMPILE) $(srcdir)/common/agent.c + $(POSTCOMPILE) installcheck: @@ -1933,83 +1987,9 @@ stamp-xml: $(srcdir)/features/feature_to_c.sh Makefile $(XMLFILES) .PRECIOUS: xml-builtin.c -# -# gdb/cli/ dependencies -# -# Need to explicitly specify the compile rule as make will do nothing -# or try to compile the object file into the sub-directory. - -cli-cmds.o: $(srcdir)/cli/cli-cmds.c - $(COMPILE) $(srcdir)/cli/cli-cmds.c - $(POSTCOMPILE) - -cli-decode.o: $(srcdir)/cli/cli-decode.c - $(COMPILE) $(srcdir)/cli/cli-decode.c - $(POSTCOMPILE) - -cli-dump.o: $(srcdir)/cli/cli-dump.c - $(COMPILE) $(srcdir)/cli/cli-dump.c - $(POSTCOMPILE) - -cli-interp.o: $(srcdir)/cli/cli-interp.c - $(COMPILE) $(srcdir)/cli/cli-interp.c - $(POSTCOMPILE) - -cli-logging.o: $(srcdir)/cli/cli-logging.c - $(COMPILE) $(srcdir)/cli/cli-logging.c - $(POSTCOMPILE) - -cli-script.o: $(srcdir)/cli/cli-script.c - $(COMPILE) $(srcdir)/cli/cli-script.c - $(POSTCOMPILE) - -cli-setshow.o: $(srcdir)/cli/cli-setshow.c - $(COMPILE) $(srcdir)/cli/cli-setshow.c - $(POSTCOMPILE) - -cli-utils.o: $(srcdir)/cli/cli-utils.c - $(COMPILE) $(srcdir)/cli/cli-utils.c - $(POSTCOMPILE) - -# GCC Compile support dependencies -# -# Need to explicitly specify the compile rule as make will do nothing -# or try to compile the object file into the sub-directory. - -compile.o: $(srcdir)/compile/compile.c - $(COMPILE) $(srcdir)/compile/compile.c - $(POSTCOMPILE) - -compile-c-types.o: $(srcdir)/compile/compile-c-types.c - $(COMPILE) $(srcdir)/compile/compile-c-types.c - $(POSTCOMPILE) - -compile-c-symbols.o: $(srcdir)/compile/compile-c-symbols.c - $(COMPILE) $(srcdir)/compile/compile-c-symbols.c - $(POSTCOMPILE) - -compile-object-load.o: $(srcdir)/compile/compile-object-load.c - $(COMPILE) $(srcdir)/compile/compile-object-load.c - $(POSTCOMPILE) - -compile-object-run.o: $(srcdir)/compile/compile-object-run.c - $(COMPILE) $(srcdir)/compile/compile-object-run.c - $(POSTCOMPILE) - -compile-loc2c.o: $(srcdir)/compile/compile-loc2c.c - $(COMPILE) $(srcdir)/compile/compile-loc2c.c - $(POSTCOMPILE) - -compile-c-support.o: $(srcdir)/compile/compile-c-support.c - $(COMPILE) $(srcdir)/compile/compile-c-support.c - $(POSTCOMPILE) - - # # GDBTK sub-directory # -# Need to explicitly specify the compile rule as make will do nothing -# or try to compile the object file into the mi directory. all-gdbtk: insight$(EXEEXT) @@ -2074,663 +2054,6 @@ all_gdbtk_cflags = $(IDE_CFLAGS) $(ITCL_CFLAGS) \ -DGDBTK_LIBRARY=\"$(GDBTK_LIBRARY)\" \ -DSRC_DIR=\"$(GDBTK_SRC_DIR)\" -gdbtk.o: $(srcdir)/gdbtk/generic/gdbtk.c - $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk.c - $(POSTCOMPILE) - -gdbtk-bp.o: $(srcdir)/gdbtk/generic/gdbtk-bp.c - $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-bp.c - $(POSTCOMPILE) - -gdbtk-cmds.o: $(srcdir)/gdbtk/generic/gdbtk-cmds.c - $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-cmds.c - $(POSTCOMPILE) - -gdbtk-hooks.o: $(srcdir)/gdbtk/generic/gdbtk-hooks.c - $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-hooks.c - $(POSTCOMPILE) - -gdbtk-interp.o: $(srcdir)/gdbtk/generic/gdbtk-interp.c - $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-interp.c - $(POSTCOMPILE) - -gdbtk-main.o: $(srcdir)/gdbtk/generic/gdbtk-main.c - $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-main.c - $(POSTCOMPILE) - -gdbtk-register.o: $(srcdir)/gdbtk/generic/gdbtk-register.c - $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-register.c - $(POSTCOMPILE) - -gdbtk-stack.o: $(srcdir)/gdbtk/generic/gdbtk-stack.c - $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-stack.c - $(POSTCOMPILE) - -gdbtk-varobj.o: $(srcdir)/gdbtk/generic/gdbtk-varobj.c - $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-varobj.c - $(POSTCOMPILE) - -gdbtk-wrapper.o: $(srcdir)/gdbtk/generic/gdbtk-wrapper.c - $(COMPILE) $(all_gdbtk_cflags) $(srcdir)/gdbtk/generic/gdbtk-wrapper.c - $(POSTCOMPILE) - - -# -# gdb/mi/ dependencies -# -# Need to explicitly specify the compile rule as make will do nothing -# or try to compile the object file into the sub-directory. - -mi-cmd-break.o: $(srcdir)/mi/mi-cmd-break.c - $(COMPILE) $(srcdir)/mi/mi-cmd-break.c - $(POSTCOMPILE) - -mi-cmd-catch.o: $(srcdir)/mi/mi-cmd-catch.c - $(COMPILE) $(srcdir)/mi/mi-cmd-catch.c - $(POSTCOMPILE) - -mi-cmd-disas.o: $(srcdir)/mi/mi-cmd-disas.c - $(COMPILE) $(srcdir)/mi/mi-cmd-disas.c - $(POSTCOMPILE) - -mi-cmd-env.o: $(srcdir)/mi/mi-cmd-env.c - $(COMPILE) $(srcdir)/mi/mi-cmd-env.c - $(POSTCOMPILE) - -mi-cmd-file.o: $(srcdir)/mi/mi-cmd-file.c - $(COMPILE) $(srcdir)/mi/mi-cmd-file.c - $(POSTCOMPILE) - -mi-cmd-info.o: $(srcdir)/mi/mi-cmd-info.c - $(COMPILE) $(srcdir)/mi/mi-cmd-info.c - $(POSTCOMPILE) - -mi-cmds.o: $(srcdir)/mi/mi-cmds.c - $(COMPILE) $(srcdir)/mi/mi-cmds.c - $(POSTCOMPILE) - -mi-cmd-stack.o: $(srcdir)/mi/mi-cmd-stack.c - $(COMPILE) $(srcdir)/mi/mi-cmd-stack.c - $(POSTCOMPILE) - -mi-cmd-target.o: $(srcdir)/mi/mi-cmd-target.c - $(COMPILE) $(srcdir)/mi/mi-cmd-target.c - $(POSTCOMPILE) - -mi-cmd-var.o: $(srcdir)/mi/mi-cmd-var.c - $(COMPILE) $(srcdir)/mi/mi-cmd-var.c - $(POSTCOMPILE) - -mi-console.o: $(srcdir)/mi/mi-console.c - $(COMPILE) $(srcdir)/mi/mi-console.c - $(POSTCOMPILE) - -mi-getopt.o: $(srcdir)/mi/mi-getopt.c - $(COMPILE) $(srcdir)/mi/mi-getopt.c - $(POSTCOMPILE) - -mi-interp.o: $(srcdir)/mi/mi-interp.c - $(COMPILE) $(srcdir)/mi/mi-interp.c - $(POSTCOMPILE) - -mi-main.o: $(srcdir)/mi/mi-main.c - $(COMPILE) $(srcdir)/mi/mi-main.c - $(POSTCOMPILE) - -mi-out.o: $(srcdir)/mi/mi-out.c - $(COMPILE) $(srcdir)/mi/mi-out.c - $(POSTCOMPILE) - -mi-parse.o: $(srcdir)/mi/mi-parse.c - $(COMPILE) $(srcdir)/mi/mi-parse.c - $(POSTCOMPILE) - -mi-symbol-cmds.o: $(srcdir)/mi/mi-symbol-cmds.c - $(COMPILE) $(srcdir)/mi/mi-symbol-cmds.c - $(POSTCOMPILE) - -mi-common.o: $(srcdir)/mi/mi-common.c - $(COMPILE) $(srcdir)/mi/mi-common.c - $(POSTCOMPILE) - -# gdb/common/ dependencies -# -# Need to explicitly specify the compile rule as make will do nothing -# or try to compile the object file into the sub-directory. - -signals.o: $(srcdir)/common/signals.c - $(COMPILE) $(srcdir)/common/signals.c - $(POSTCOMPILE) - -common-utils.o: ${srcdir}/common/common-utils.c - $(COMPILE) $(srcdir)/common/common-utils.c - $(POSTCOMPILE) - -gdb_vecs.o: ${srcdir}/common/gdb_vecs.c - $(COMPILE) $(srcdir)/common/gdb_vecs.c - $(POSTCOMPILE) - -xml-utils.o: ${srcdir}/common/xml-utils.c - $(COMPILE) $(srcdir)/common/xml-utils.c - $(POSTCOMPILE) - -ptid.o: ${srcdir}/common/ptid.c - $(COMPILE) $(srcdir)/common/ptid.c - $(POSTCOMPILE) - -buffer.o: ${srcdir}/common/buffer.c - $(COMPILE) $(srcdir)/common/buffer.c - $(POSTCOMPILE) - -filestuff.o: $(srcdir)/common/filestuff.c - $(COMPILE) $(srcdir)/common/filestuff.c - $(POSTCOMPILE) - -format.o: ${srcdir}/common/format.c - $(COMPILE) $(srcdir)/common/format.c - $(POSTCOMPILE) - -common-agent.o: $(srcdir)/common/agent.c - $(COMPILE) $(srcdir)/common/agent.c - $(POSTCOMPILE) - -vec.o: ${srcdir}/common/vec.c - $(COMPILE) $(srcdir)/common/vec.c - $(POSTCOMPILE) - -print-utils.o: ${srcdir}/common/print-utils.c - $(COMPILE) $(srcdir)/common/print-utils.c - $(POSTCOMPILE) - -rsp-low.o: ${srcdir}/common/rsp-low.c - $(COMPILE) $(srcdir)/common/rsp-low.c - $(POSTCOMPILE) - -errors.o: ${srcdir}/common/errors.c - $(COMPILE) $(srcdir)/common/errors.c - $(POSTCOMPILE) - -common-debug.o: ${srcdir}/common/common-debug.c - $(COMPILE) $(srcdir)/common/common-debug.c - $(POSTCOMPILE) - -cleanups.o: ${srcdir}/common/cleanups.c - $(COMPILE) $(srcdir)/common/cleanups.c - $(POSTCOMPILE) - -common-exceptions.o: ${srcdir}/common/common-exceptions.c - $(COMPILE) $(srcdir)/common/common-exceptions.c - $(POSTCOMPILE) - -posix-strerror.o: ${srcdir}/common/posix-strerror.c - $(COMPILE) $(srcdir)/common/posix-strerror.c - $(POSTCOMPILE) - -mingw-strerror.o: ${srcdir}/common/mingw-strerror.c - $(COMPILE) $(srcdir)/common/mingw-strerror.c - $(POSTCOMPILE) - -btrace-common.o: ${srcdir}/common/btrace-common.c - $(COMPILE) $(srcdir)/common/btrace-common.c - $(POSTCOMPILE) - -fileio.o: ${srcdir}/common/fileio.c - $(COMPILE) $(srcdir)/common/fileio.c - $(POSTCOMPILE) - -common-regcache.o: ${srcdir}/common/common-regcache.c - $(COMPILE) $(srcdir)/common/common-regcache.c - $(POSTCOMPILE) - -signals-state-save-restore.o: $(srcdir)/common/signals-state-save-restore.c - $(COMPILE) $(srcdir)/common/signals-state-save-restore.c - $(POSTCOMPILE) - -new-op.o: ${srcdir}/common/new-op.c - $(COMPILE) $(srcdir)/common/new-op.c - $(POSTCOMPILE) - -# -# gdb/target/ dependencies -# -# Need to explicitly specify the compile rule as make will do nothing -# or try to compile the object file into the sub-directory. - -waitstatus.o: ${srcdir}/target/waitstatus.c - $(COMPILE) $(srcdir)/target/waitstatus.c - $(POSTCOMPILE) - -# -# gdb/arch/ dependencies -# -# Need to explicitly specify the compile rule as make will do nothing -# or try to compile the object file into the sub-directory. - -arm.o: ${srcdir}/arch/arm.c - $(COMPILE) $(srcdir)/arch/arm.c - $(POSTCOMPILE) - -arm-linux.o: ${srcdir}/arch/arm-linux.c - $(COMPILE) $(srcdir)/arch/arm-linux.c - $(POSTCOMPILE) - -arm-get-next-pcs.o: ${srcdir}/arch/arm-get-next-pcs.c - $(COMPILE) $(srcdir)/arch/arm-get-next-pcs.c - $(POSTCOMPILE) - -# gdb/nat/ dependencies -# -# Need to explicitly specify the compile rule as make will do nothing -# or try to compile the object file into the sub-directory. - -x86-dregs.o: ${srcdir}/nat/x86-dregs.c - $(COMPILE) $(srcdir)/nat/x86-dregs.c - $(POSTCOMPILE) - -linux-btrace.o: ${srcdir}/nat/linux-btrace.c - $(COMPILE) $(srcdir)/nat/linux-btrace.c - $(POSTCOMPILE) - -linux-osdata.o: ${srcdir}/nat/linux-osdata.c - $(COMPILE) $(srcdir)/nat/linux-osdata.c - $(POSTCOMPILE) - -linux-procfs.o: $(srcdir)/nat/linux-procfs.c - $(COMPILE) $(srcdir)/nat/linux-procfs.c - $(POSTCOMPILE) - -linux-ptrace.o: $(srcdir)/nat/linux-ptrace.c - $(COMPILE) $(srcdir)/nat/linux-ptrace.c - $(POSTCOMPILE) - -linux-waitpid.o: ${srcdir}/nat/linux-waitpid.c - $(COMPILE) $(srcdir)/nat/linux-waitpid.c - $(POSTCOMPILE) - -mips-linux-watch.o: ${srcdir}/nat/mips-linux-watch.c - $(COMPILE) $(srcdir)/nat/mips-linux-watch.c - $(POSTCOMPILE) - -ppc-linux.o: ${srcdir}/nat/ppc-linux.c - $(COMPILE) $(srcdir)/nat/ppc-linux.c - $(POSTCOMPILE) - -linux-personality.o: ${srcdir}/nat/linux-personality.c - $(COMPILE) $(srcdir)/nat/linux-personality.c - $(POSTCOMPILE) - -x86-linux.o: ${srcdir}/nat/x86-linux.c - $(COMPILE) $(srcdir)/nat/x86-linux.c - $(POSTCOMPILE) - -x86-linux-dregs.o: ${srcdir}/nat/x86-linux-dregs.c - $(COMPILE) $(srcdir)/nat/x86-linux-dregs.c - $(POSTCOMPILE) - -amd64-linux-siginfo.o: ${srcdir}/nat/amd64-linux-siginfo.c - $(COMPILE) $(srcdir)/nat/amd64-linux-siginfo.c - $(POSTCOMPILE) - -linux-namespaces.o: ${srcdir}/nat/linux-namespaces.c - $(COMPILE) $(srcdir)/nat/linux-namespaces.c - $(POSTCOMPILE) - -aarch64-linux-hw-point.o: ${srcdir}/nat/aarch64-linux-hw-point.c - $(COMPILE) $(srcdir)/nat/aarch64-linux-hw-point.c - $(POSTCOMPILE) - -aarch64-linux.o: ${srcdir}/nat/aarch64-linux.c - $(COMPILE) $(srcdir)/nat/aarch64-linux.c - $(POSTCOMPILE) - -# gdb/arch/ dependencies -# -# Need to explicitly specify the compile rule as make will do nothing -# or try to compile the object file into the sub-directory. - -aarch64-insn.o: ${srcdir}/arch/aarch64-insn.c - $(COMPILE) $(srcdir)/arch/aarch64-insn.c - $(POSTCOMPILE) - -# -# gdb/tui/ dependencies -# -# Need to explicitly specify the compile rule as make will do nothing -# or try to compile the object file into the sub-directory. - -tui.o: $(srcdir)/tui/tui.c - $(COMPILE) $(srcdir)/tui/tui.c - $(POSTCOMPILE) - -tui-command.o: $(srcdir)/tui/tui-command.c - $(COMPILE) $(srcdir)/tui/tui-command.c - $(POSTCOMPILE) - -tui-data.o: $(srcdir)/tui/tui-data.c - $(COMPILE) $(srcdir)/tui/tui-data.c - $(POSTCOMPILE) - -tui-disasm.o: $(srcdir)/tui/tui-disasm.c - $(COMPILE) $(srcdir)/tui/tui-disasm.c - $(POSTCOMPILE) - -tui-file.o: $(srcdir)/tui/tui-file.c - $(COMPILE) $(srcdir)/tui/tui-file.c - $(POSTCOMPILE) - -tui-hooks.o: $(srcdir)/tui/tui-hooks.c - $(COMPILE) $(srcdir)/tui/tui-hooks.c - $(POSTCOMPILE) - -tui-interp.o: $(srcdir)/tui/tui-interp.c - $(COMPILE) $(srcdir)/tui/tui-interp.c - $(POSTCOMPILE) - -tui-io.o: $(srcdir)/tui/tui-io.c - $(COMPILE) $(srcdir)/tui/tui-io.c - $(POSTCOMPILE) - -tui-layout.o: $(srcdir)/tui/tui-layout.c - $(COMPILE) $(srcdir)/tui/tui-layout.c - $(POSTCOMPILE) - -tui-out.o: $(srcdir)/tui/tui-out.c - $(COMPILE) $(srcdir)/tui/tui-out.c - $(POSTCOMPILE) - -tui-regs.o: $(srcdir)/tui/tui-regs.c - $(COMPILE) $(srcdir)/tui/tui-regs.c - $(POSTCOMPILE) - -tui-source.o: $(srcdir)/tui/tui-source.c - $(COMPILE) $(srcdir)/tui/tui-source.c - $(POSTCOMPILE) - -tui-stack.o: $(srcdir)/tui/tui-stack.c - $(COMPILE) $(srcdir)/tui/tui-stack.c - $(POSTCOMPILE) - -tui-win.o: $(srcdir)/tui/tui-win.c - $(COMPILE) $(srcdir)/tui/tui-win.c - $(POSTCOMPILE) - -tui-windata.o: $(srcdir)/tui/tui-windata.c - $(COMPILE) $(srcdir)/tui/tui-windata.c - $(POSTCOMPILE) - -tui-wingeneral.o: $(srcdir)/tui/tui-wingeneral.c - $(COMPILE) $(srcdir)/tui/tui-wingeneral.c - $(POSTCOMPILE) - -tui-winsource.o: $(srcdir)/tui/tui-winsource.c - $(COMPILE) $(srcdir)/tui/tui-winsource.c - $(POSTCOMPILE) - -# gdb/guile dependencies -# -# Need to explicitly specify the compile rule as make will do nothing -# or try to compile the object file into the sub-directory. - -guile.o: $(srcdir)/guile/guile.c - $(COMPILE) $(srcdir)/guile/guile.c - $(POSTCOMPILE) - -scm-arch.o: $(srcdir)/guile/scm-arch.c - $(COMPILE) $(srcdir)/guile/scm-arch.c - $(POSTCOMPILE) - -scm-auto-load.o: $(srcdir)/guile/scm-auto-load.c - $(COMPILE) $(srcdir)/guile/scm-auto-load.c - $(POSTCOMPILE) - -scm-block.o: $(srcdir)/guile/scm-block.c - $(COMPILE) $(srcdir)/guile/scm-block.c - $(POSTCOMPILE) - -scm-breakpoint.o: $(srcdir)/guile/scm-breakpoint.c - $(COMPILE) $(srcdir)/guile/scm-breakpoint.c - $(POSTCOMPILE) - -scm-cmd.o: $(srcdir)/guile/scm-cmd.c - $(COMPILE) $(srcdir)/guile/scm-cmd.c - $(POSTCOMPILE) - -scm-disasm.o: $(srcdir)/guile/scm-disasm.c - $(COMPILE) $(srcdir)/guile/scm-disasm.c - $(POSTCOMPILE) - -scm-exception.o: $(srcdir)/guile/scm-exception.c - $(COMPILE) $(srcdir)/guile/scm-exception.c - $(POSTCOMPILE) - -scm-frame.o: $(srcdir)/guile/scm-frame.c - $(COMPILE) $(srcdir)/guile/scm-frame.c - $(POSTCOMPILE) - -scm-gsmob.o: $(srcdir)/guile/scm-gsmob.c - $(COMPILE) $(srcdir)/guile/scm-gsmob.c - $(POSTCOMPILE) - -scm-iterator.o: $(srcdir)/guile/scm-iterator.c - $(COMPILE) $(srcdir)/guile/scm-iterator.c - $(POSTCOMPILE) - -scm-lazy-string.o: $(srcdir)/guile/scm-lazy-string.c - $(COMPILE) $(srcdir)/guile/scm-lazy-string.c - $(POSTCOMPILE) - -scm-math.o: $(srcdir)/guile/scm-math.c - $(COMPILE) $(srcdir)/guile/scm-math.c - $(POSTCOMPILE) - -scm-objfile.o: $(srcdir)/guile/scm-objfile.c - $(COMPILE) $(srcdir)/guile/scm-objfile.c - $(POSTCOMPILE) - -scm-param.o: $(srcdir)/guile/scm-param.c - $(COMPILE) $(srcdir)/guile/scm-param.c - $(POSTCOMPILE) - -scm-ports.o: $(srcdir)/guile/scm-ports.c - $(COMPILE) $(srcdir)/guile/scm-ports.c - $(POSTCOMPILE) - -scm-pretty-print.o: $(srcdir)/guile/scm-pretty-print.c - $(COMPILE) $(srcdir)/guile/scm-pretty-print.c - $(POSTCOMPILE) - -scm-progspace.o: $(srcdir)/guile/scm-progspace.c - $(COMPILE) $(srcdir)/guile/scm-progspace.c - $(POSTCOMPILE) - -scm-safe-call.o: $(srcdir)/guile/scm-safe-call.c - $(COMPILE) $(srcdir)/guile/scm-safe-call.c - $(POSTCOMPILE) - -scm-string.o: $(srcdir)/guile/scm-string.c - $(COMPILE) $(srcdir)/guile/scm-string.c - $(POSTCOMPILE) - -scm-symbol.o: $(srcdir)/guile/scm-symbol.c - $(COMPILE) $(srcdir)/guile/scm-symbol.c - $(POSTCOMPILE) - -scm-symtab.o: $(srcdir)/guile/scm-symtab.c - $(COMPILE) $(srcdir)/guile/scm-symtab.c - $(POSTCOMPILE) - -scm-type.o: $(srcdir)/guile/scm-type.c - $(COMPILE) $(srcdir)/guile/scm-type.c - $(POSTCOMPILE) - -scm-utils.o: $(srcdir)/guile/scm-utils.c - $(COMPILE) $(srcdir)/guile/scm-utils.c - $(POSTCOMPILE) - -scm-value.o: $(srcdir)/guile/scm-value.c - $(COMPILE) $(srcdir)/guile/scm-value.c - $(POSTCOMPILE) - -# gdb/python/ dependencies -# -# Need to explicitly specify the compile rule as make will do nothing -# or try to compile the object file into the sub-directory. - -# Flags needed to compile Python code -PYTHON_CFLAGS=@PYTHON_CFLAGS@ - -python.o: $(srcdir)/python/python.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/python.c - $(POSTCOMPILE) - -py-arch.o: $(srcdir)/python/py-arch.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-arch.c - $(POSTCOMPILE) - -py-auto-load.o: $(srcdir)/python/py-auto-load.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-auto-load.c - $(POSTCOMPILE) - -py-block.o: $(srcdir)/python/py-block.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-block.c - $(POSTCOMPILE) - -py-bpevent.o: $(srcdir)/python/py-bpevent.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-bpevent.c - $(POSTCOMPILE) - -py-breakpoint.o: $(srcdir)/python/py-breakpoint.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-breakpoint.c - $(POSTCOMPILE) - -py-cmd.o: $(srcdir)/python/py-cmd.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-cmd.c - $(POSTCOMPILE) - -py-continueevent.o: $(srcdir)/python/py-continueevent.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-continueevent.c - $(POSTCOMPILE) - -py-xmethods.o: $(srcdir)/python/py-xmethods.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-xmethods.c - $(POSTCOMPILE) - -py-event.o: $(srcdir)/python/py-event.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-event.c - $(POSTCOMPILE) - -py-evtregistry.o: $(srcdir)/python/py-evtregistry.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-evtregistry.c - $(POSTCOMPILE) - -py-evts.o: $(srcdir)/python/py-evts.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-evts.c - $(POSTCOMPILE) - -py-exitedevent.o: $(srcdir)/python/py-exitedevent.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-exitedevent.c - $(POSTCOMPILE) - -py-finishbreakpoint.o: $(srcdir)/python/py-finishbreakpoint.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-finishbreakpoint.c - $(POSTCOMPILE) - -py-frame.o: $(srcdir)/python/py-frame.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-frame.c - $(POSTCOMPILE) - -py-framefilter.o: $(srcdir)/python/py-framefilter.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-framefilter.c - $(POSTCOMPILE) - -py-function.o: $(srcdir)/python/py-function.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-function.c - $(POSTCOMPILE) - -py-gdb-readline.o: $(srcdir)/python/py-gdb-readline.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-gdb-readline.c - $(POSTCOMPILE) - -py-inferior.o: $(srcdir)/python/py-inferior.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-inferior.c - $(POSTCOMPILE) - -py-infevents.o: $(srcdir)/python/py-infevents.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-infevents.c - $(POSTCOMPILE) - -py-infthread.o: $(srcdir)/python/py-infthread.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-infthread.c - $(POSTCOMPILE) - -py-lazy-string.o: $(srcdir)/python/py-lazy-string.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-lazy-string.c - $(POSTCOMPILE) - -py-linetable.o: $(srcdir)/python/py-linetable.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-linetable.c - $(POSTCOMPILE) - -py-newobjfileevent.o: $(srcdir)/python/py-newobjfileevent.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-newobjfileevent.c - $(POSTCOMPILE) - -py-objfile.o: $(srcdir)/python/py-objfile.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-objfile.c - $(POSTCOMPILE) - -py-param.o: $(srcdir)/python/py-param.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-param.c - $(POSTCOMPILE) - -py-prettyprint.o: $(srcdir)/python/py-prettyprint.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-prettyprint.c - $(POSTCOMPILE) - -py-progspace.o: $(srcdir)/python/py-progspace.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-progspace.c - $(POSTCOMPILE) - -py-signalevent.o: $(srcdir)/python/py-signalevent.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-signalevent.c - $(POSTCOMPILE) - -py-stopevent.o: $(srcdir)/python/py-stopevent.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-stopevent.c - $(POSTCOMPILE) - -py-symbol.o: $(srcdir)/python/py-symbol.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-symbol.c - $(POSTCOMPILE) - -py-symtab.o: $(srcdir)/python/py-symtab.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-symtab.c - $(POSTCOMPILE) - -py-threadevent.o: $(srcdir)/python/py-threadevent.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-threadevent.c - $(POSTCOMPILE) - -py-type.o: $(srcdir)/python/py-type.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-type.c - $(POSTCOMPILE) - -py-unwind.o: $(srcdir)/python/py-unwind.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-unwind.c - $(POSTCOMPILE) - -py-utils.o: $(srcdir)/python/py-utils.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-utils.c - $(POSTCOMPILE) - -py-value.o: $(srcdir)/python/py-value.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-value.c - $(POSTCOMPILE) - -py-varobj.o: $(srcdir)/python/py-varobj.c - $(COMPILE) $(PYTHON_CFLAGS) $(srcdir)/python/py-varobj.c - $(POSTCOMPILE) - # # Dependency tracking. #