From: Gustavo Zacarias Date: Thu, 13 Oct 2016 13:02:48 +0000 (-0300) Subject: configs/qemu: bump to the latest kernel version X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=477756b257c4b72e03679b9142104860e1d4dabc;p=buildroot.git configs/qemu: bump to the latest kernel version Drop m68k-mcf5208 kernel patch since it's upstream. Also bump the pc samples since they're tied to the (base) qemu config. Results table: Defconfig Kernel Qemu Network Status -------------------------------------------------------------- aarch64_virt 4.8.1 2.6.0 YES OK (3) arm_versatile 4.8.1 2.5.0 YES OK arm_vexpress 4.8.1 2.5.0 YES OK m68k_mcf5208 4.8.1 2.5.0 YES OK m68k_q800 4.8.1 q800-v2.4.0 NO (2) OK microblazebe 4.8.1 2.5.0 YES OK microblazeel 4.8.1 2.5.0 YES OK mips32r2el_malta 4.8.1 2.5.0 YES OK mips32r2_malta 4.8.1 2.5.0 YES OK mips32r6el_malta 4.8.1 2.6.0 YES OK (3) mips32r6_malta 4.8.1 2.6.0 YES OK (3) mips64el_malta 4.8.1 2.5.0 YES OK mips64_malta 4.8.1 2.5.0 YES OK mips64r6el_malta 4.8.1 2.7.0 YES OK (3)(4) mips64r6_malta 4.8.1 2.7.0 YES OK (3)(4) ppc_g3beige 4.8.1 2.5.0 YES OK ppc_mpc8544ds 4.8.1 2.5.0 YES OK ppc_virtex_ml507 4.8.1 2.5.0 NO OK ppc64_pseries 4.8.1 2.5.0 YES OK sh4 4.8.1 2.5.0 YES OK sh4eb 4.8.1 2.5.0 NO (1) OK sparc_ss10 4.8.1 2.5.0 YES OK sparc64_sun4u 4.8.1 2.5.0 YES OK sparc_sun4u 4.8.1 2.5.0 YES OK x86 4.8.1 2.5.0 YES OK x86_64 4.8.1 2.5.0 YES OK xtensa_lx60 4.8.1 2.6.0 YES OK xtensa_lx60_nommu 4.8.1 2.6.0 YES OK (1) - Probably an endian issue with 8139 emulation/driver (2) - There's a network interface, but enabling it in qemu fails (3) - Known to fail with qemu versions lower than 2.6.0 (4) - Might work with 2.6.0, but the cpu definition changed in 2.7.0 Signed-off-by: Gustavo Zacarias Signed-off-by: Peter Korsgaard --- diff --git a/board/qemu/aarch64-virt/linux-4.7.config b/board/qemu/aarch64-virt/linux-4.7.config deleted file mode 100644 index 93cb42f2ea..0000000000 --- a/board/qemu/aarch64-virt/linux-4.7.config +++ /dev/null @@ -1,56 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_FHANDLE=y -CONFIG_NO_HZ_IDLE=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_TASKSTATS=y -CONFIG_SCHED_AUTOGROUP=y -CONFIG_PROFILING=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_BLK_DEV_BSGLIB=y -CONFIG_ARCH_VEXPRESS=y -CONFIG_SMP=y -CONFIG_TRANSPARENT_HUGEPAGE=y -CONFIG_BINFMT_MISC=y -CONFIG_COMPAT=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_PACKET_DIAG=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_BRIDGE=m -CONFIG_NET_SCHED=y -CONFIG_VSOCKETS=y -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_VIRTIO_BLK=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_SCSI_VIRTIO=y -CONFIG_ATA=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=y -CONFIG_MACVLAN=y -CONFIG_VIRTIO_NET=y -CONFIG_NLMON=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_VIRTIO_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_VIRTIO=y -CONFIG_RTC_CLASS=y -CONFIG_VIRTIO_MMIO=y -CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y -CONFIG_MAILBOX=y -CONFIG_PL320_MBOX=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/aarch64-virt/linux-4.8.config b/board/qemu/aarch64-virt/linux-4.8.config new file mode 100644 index 0000000000..93cb42f2ea --- /dev/null +++ b/board/qemu/aarch64-virt/linux-4.8.config @@ -0,0 +1,56 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_TASKSTATS=y +CONFIG_SCHED_AUTOGROUP=y +CONFIG_PROFILING=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_BLK_DEV_BSGLIB=y +CONFIG_ARCH_VEXPRESS=y +CONFIG_SMP=y +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_BINFMT_MISC=y +CONFIG_COMPAT=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_PACKET_DIAG=y +CONFIG_UNIX=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_BRIDGE=m +CONFIG_NET_SCHED=y +CONFIG_VSOCKETS=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_VIRTIO_BLK=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_VIRTIO=y +CONFIG_ATA=y +CONFIG_NETDEVICES=y +CONFIG_DUMMY=y +CONFIG_MACVLAN=y +CONFIG_VIRTIO_NET=y +CONFIG_NLMON=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_VIRTIO_CONSOLE=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_VIRTIO=y +CONFIG_RTC_CLASS=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y +CONFIG_MAILBOX=y +CONFIG_PL320_MBOX=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/arm-versatile/linux-4.7.config b/board/qemu/arm-versatile/linux-4.7.config deleted file mode 100644 index b1001d84a7..0000000000 --- a/board/qemu/arm-versatile/linux-4.7.config +++ /dev/null @@ -1,43 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_ARCH_MULTI_V7 is not set -CONFIG_ARCH_VERSATILE=y -CONFIG_PCI=y -CONFIG_PCI_VERSATILE=y -CONFIG_AEABI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_SYM53C8XX_2=y -CONFIG_NETDEVICES=y -CONFIG_8139CP=y -CONFIG_PHYLIB=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIO_AMBAKMI=y -CONFIG_LEGACY_PTY_COUNT=16 -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_RSA=y -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=m -CONFIG_FB=y -CONFIG_FB_ARMCLCD=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_SOUND=y -CONFIG_SND=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_ARMAACI=m -CONFIG_EXT4_FS=y -CONFIG_VFAT_FS=m -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_MAGIC_SYSRQ=y diff --git a/board/qemu/arm-versatile/linux-4.8.config b/board/qemu/arm-versatile/linux-4.8.config new file mode 100644 index 0000000000..b1001d84a7 --- /dev/null +++ b/board/qemu/arm-versatile/linux-4.8.config @@ -0,0 +1,43 @@ +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_ARCH_MULTI_V7 is not set +CONFIG_ARCH_VERSATILE=y +CONFIG_PCI=y +CONFIG_PCI_VERSATILE=y +CONFIG_AEABI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_SYM53C8XX_2=y +CONFIG_NETDEVICES=y +CONFIG_8139CP=y +CONFIG_PHYLIB=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIO_AMBAKMI=y +CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=m +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_SOUND=y +CONFIG_SND=m +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_ARMAACI=m +CONFIG_EXT4_FS=y +CONFIG_VFAT_FS=m +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_MAGIC_SYSRQ=y diff --git a/board/qemu/m68k-mcf5208/linux-4.7.config b/board/qemu/m68k-mcf5208/linux-4.7.config deleted file mode 100644 index 09a89d7255..0000000000 --- a/board/qemu/m68k-mcf5208/linux-4.7.config +++ /dev/null @@ -1,28 +0,0 @@ -CONFIG_M68K=y -CONFIG_COLDFIRE=y -# CONFIG_MMU is not set -CONFIG_M520x=y -CONFIG_CLOCK_SET=y -CONFIG_CLOCK_FREQ=66666666 -CONFIG_CLOCK_DIV=1 -CONFIG_M5208EVB=y -CONFIG_FREESCALE=y -CONFIG_RAMBASE=0x40000000 -CONFIG_RAMSIZE=0x0 -CONFIG_VECTORBASE=0x40000000 -CONFIG_KERNELBASE=0x40020000 -CONFIG_4KSTACKS=y -CONFIG_RAMKERNEL=y -CONFIG_BINFMT_FLAT=y -CONFIG_SERIAL_MCF=y -CONFIG_SERIAL_MCF_BAUDRATE=115200 -CONFIG_SERIAL_MCF_CONSOLE=y -CONFIG_BOOTPARAM=y -CONFIG_BOOTPARAM_STRING="console=ttyS0,115200" -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_NETDEVICES=y -CONFIG_NET_VENDOR_FREESCALE=y -CONFIG_FEC=y diff --git a/board/qemu/m68k-mcf5208/linux-4.8.config b/board/qemu/m68k-mcf5208/linux-4.8.config new file mode 100644 index 0000000000..09a89d7255 --- /dev/null +++ b/board/qemu/m68k-mcf5208/linux-4.8.config @@ -0,0 +1,28 @@ +CONFIG_M68K=y +CONFIG_COLDFIRE=y +# CONFIG_MMU is not set +CONFIG_M520x=y +CONFIG_CLOCK_SET=y +CONFIG_CLOCK_FREQ=66666666 +CONFIG_CLOCK_DIV=1 +CONFIG_M5208EVB=y +CONFIG_FREESCALE=y +CONFIG_RAMBASE=0x40000000 +CONFIG_RAMSIZE=0x0 +CONFIG_VECTORBASE=0x40000000 +CONFIG_KERNELBASE=0x40020000 +CONFIG_4KSTACKS=y +CONFIG_RAMKERNEL=y +CONFIG_BINFMT_FLAT=y +CONFIG_SERIAL_MCF=y +CONFIG_SERIAL_MCF_BAUDRATE=115200 +CONFIG_SERIAL_MCF_CONSOLE=y +CONFIG_BOOTPARAM=y +CONFIG_BOOTPARAM_STRING="console=ttyS0,115200" +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_NETDEVICES=y +CONFIG_NET_VENDOR_FREESCALE=y +CONFIG_FEC=y diff --git a/board/qemu/m68k-mcf5208/patches/linux/m68knommu-fix-signal.patch b/board/qemu/m68k-mcf5208/patches/linux/m68knommu-fix-signal.patch deleted file mode 100644 index b56994b239..0000000000 --- a/board/qemu/m68k-mcf5208/patches/linux/m68knommu-fix-signal.patch +++ /dev/null @@ -1,45 +0,0 @@ -m68knommu: fix user a5 register being overwritten - -On no-MMU systems the application a5 register can be overwitten with the -address of the process data segment when processing application signals. -For flat format applications compiled with full absolute relocation this -effectively corrupts the a5 register on signal processing - and this very -quickly leads to process crash and often takes out the whole system with -a panic as well. - -This has no effect on flat format applications compiled with the more -common PIC methods (such as -msep-data). These format applications reserve -a5 for the pointer to the data segment anyway - so it doesn't change it. - -A long time ago the a5 register was used in the code packed into the user -stack to enable signal return processing. And so it had to be restored on -end of signal cleanup processing back to the original a5 user value. This -was historically done by saving away a5 in the sigcontext structure. At -some point (a long time back it seems) the a5 restore process was changed -and it was hard coded to put the user data segment address directly into a5. -Which is ok for the common PIC compiled application case, but breaks the -full relocation application code. - -We no longer use this type of signal handling mechanism and so we don't -need to do anything special to save and restore a5 at all now. So remove the -code that hard codes a5 to the address of the user data segment. - -Signed-off-by: Greg Ungerer ---- - arch/m68k/kernel/signal.c | 1 - - 1 file changed, 1 deletion(-) - -diff --git a/arch/m68k/kernel/signal.c b/arch/m68k/kernel/signal.c -index 2dcee3a..9202f82 100644 ---- a/arch/m68k/kernel/signal.c -+++ b/arch/m68k/kernel/signal.c -@@ -213,7 +213,6 @@ static inline int frame_extra_sizes(int f) - - static inline void adjustformat(struct pt_regs *regs) - { -- ((struct switch_stack *)regs - 1)->a5 = current->mm->start_data; - /* - * set format byte to make stack appear modulo 4, which it will - * be when doing the rte --- -1.9.1 diff --git a/board/qemu/m68k-q800/linux-4.7.config b/board/qemu/m68k-q800/linux-4.7.config deleted file mode 100644 index 44eb70e2d7..0000000000 --- a/board/qemu/m68k-q800/linux-4.7.config +++ /dev/null @@ -1,26 +0,0 @@ -CONFIG_M68K=y -CONFIG_M68040=y -CONFIG_M68KFPU_EMU=y -CONFIG_MAC=y -CONFIG_MACINTOSH_DRIVERS=y -CONFIG_ADB=y -CONFIG_ADB_MACII=y -CONFIG_TTY=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_NETDEVICES=y -CONFIG_MACSONIC=y -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -CONFIG_SCSI_LOWLEVEL=y -CONFIG_SCSI_MAC_ESP=y -CONFIG_BLK_DEV_SD=y -CONFIG_SERIAL_PMACZILOG=y -CONFIG_SERIAL_PMACZILOG_TTYS=y -CONFIG_SERIAL_PMACZILOG_CONSOLE=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y diff --git a/board/qemu/m68k-q800/linux-4.8.config b/board/qemu/m68k-q800/linux-4.8.config new file mode 100644 index 0000000000..44eb70e2d7 --- /dev/null +++ b/board/qemu/m68k-q800/linux-4.8.config @@ -0,0 +1,26 @@ +CONFIG_M68K=y +CONFIG_M68040=y +CONFIG_M68KFPU_EMU=y +CONFIG_MAC=y +CONFIG_MACINTOSH_DRIVERS=y +CONFIG_ADB=y +CONFIG_ADB_MACII=y +CONFIG_TTY=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_NETDEVICES=y +CONFIG_MACSONIC=y +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_LOWLEVEL=y +CONFIG_SCSI_MAC_ESP=y +CONFIG_BLK_DEV_SD=y +CONFIG_SERIAL_PMACZILOG=y +CONFIG_SERIAL_PMACZILOG_TTYS=y +CONFIG_SERIAL_PMACZILOG_CONSOLE=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y diff --git a/board/qemu/microblazebe-mmu/linux-4.7.config b/board/qemu/microblazebe-mmu/linux-4.7.config deleted file mode 100644 index 7bcd382060..0000000000 --- a/board/qemu/microblazebe-mmu/linux-4.7.config +++ /dev/null @@ -1,20 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_OPT_LIB_ASM=y -CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" -CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 -CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 -CONFIG_MMU=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_NETDEVICES=y -CONFIG_XILINX_EMACLITE=y -CONFIG_SERIAL_UARTLITE=y -CONFIG_SERIAL_UARTLITE_CONSOLE=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_TMPFS=y diff --git a/board/qemu/microblazebe-mmu/linux-4.8.config b/board/qemu/microblazebe-mmu/linux-4.8.config new file mode 100644 index 0000000000..7bcd382060 --- /dev/null +++ b/board/qemu/microblazebe-mmu/linux-4.8.config @@ -0,0 +1,20 @@ +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_OPT_LIB_ASM=y +CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" +CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 +CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 +CONFIG_MMU=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_NETDEVICES=y +CONFIG_XILINX_EMACLITE=y +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_TMPFS=y diff --git a/board/qemu/microblazeel-mmu/linux-4.7.config b/board/qemu/microblazeel-mmu/linux-4.7.config deleted file mode 100644 index a6228280bd..0000000000 --- a/board/qemu/microblazeel-mmu/linux-4.7.config +++ /dev/null @@ -1,19 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" -CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 -CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 -CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 -CONFIG_MMU=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_NETDEVICES=y -CONFIG_XILINX_EMACLITE=y -CONFIG_SERIAL_UARTLITE=y -CONFIG_SERIAL_UARTLITE_CONSOLE=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_TMPFS=y diff --git a/board/qemu/microblazeel-mmu/linux-4.8.config b/board/qemu/microblazeel-mmu/linux-4.8.config new file mode 100644 index 0000000000..a6228280bd --- /dev/null +++ b/board/qemu/microblazeel-mmu/linux-4.8.config @@ -0,0 +1,19 @@ +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp" +CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1 +CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1 +CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1 +CONFIG_MMU=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_NETDEVICES=y +CONFIG_XILINX_EMACLITE=y +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_TMPFS=y diff --git a/board/qemu/mips32r2-malta/linux-4.7.config b/board/qemu/mips32r2-malta/linux-4.7.config deleted file mode 100644 index 3a26ac830f..0000000000 --- a/board/qemu/mips32r2-malta/linux-4.7.config +++ /dev/null @@ -1,30 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS32_R2=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips32r2-malta/linux-4.8.config b/board/qemu/mips32r2-malta/linux-4.8.config new file mode 100644 index 0000000000..3a26ac830f --- /dev/null +++ b/board/qemu/mips32r2-malta/linux-4.8.config @@ -0,0 +1,30 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips32r2el-malta/linux-4.7.config b/board/qemu/mips32r2el-malta/linux-4.7.config deleted file mode 100644 index 79d7352474..0000000000 --- a/board/qemu/mips32r2el-malta/linux-4.7.config +++ /dev/null @@ -1,31 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS32_R2=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips32r2el-malta/linux-4.8.config b/board/qemu/mips32r2el-malta/linux-4.8.config new file mode 100644 index 0000000000..79d7352474 --- /dev/null +++ b/board/qemu/mips32r2el-malta/linux-4.8.config @@ -0,0 +1,31 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32_R2=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips32r6-malta/linux-4.7.config b/board/qemu/mips32r6-malta/linux-4.7.config deleted file mode 100644 index d559676615..0000000000 --- a/board/qemu/mips32r6-malta/linux-4.7.config +++ /dev/null @@ -1,30 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS32_R6=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips32r6-malta/linux-4.8.config b/board/qemu/mips32r6-malta/linux-4.8.config new file mode 100644 index 0000000000..d559676615 --- /dev/null +++ b/board/qemu/mips32r6-malta/linux-4.8.config @@ -0,0 +1,30 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS32_R6=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips32r6el-malta/linux-4.7.config b/board/qemu/mips32r6el-malta/linux-4.7.config deleted file mode 100644 index d559676615..0000000000 --- a/board/qemu/mips32r6el-malta/linux-4.7.config +++ /dev/null @@ -1,30 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS32_R6=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips32r6el-malta/linux-4.8.config b/board/qemu/mips32r6el-malta/linux-4.8.config new file mode 100644 index 0000000000..d559676615 --- /dev/null +++ b/board/qemu/mips32r6el-malta/linux-4.8.config @@ -0,0 +1,30 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS32_R6=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64-malta/linux-4.7.config b/board/qemu/mips64-malta/linux-4.7.config deleted file mode 100644 index cd0b560634..0000000000 --- a/board/qemu/mips64-malta/linux-4.7.config +++ /dev/null @@ -1,34 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS64_R1=y -CONFIG_64BIT=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_MIPS32_COMPAT=y -CONFIG_MIPS32_O32=y -CONFIG_MIPS32_N32=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64-malta/linux-4.8.config b/board/qemu/mips64-malta/linux-4.8.config new file mode 100644 index 0000000000..cd0b560634 --- /dev/null +++ b/board/qemu/mips64-malta/linux-4.8.config @@ -0,0 +1,34 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS64_R1=y +CONFIG_64BIT=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_MIPS32_COMPAT=y +CONFIG_MIPS32_O32=y +CONFIG_MIPS32_N32=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64el-malta/linux-4.7.config b/board/qemu/mips64el-malta/linux-4.7.config deleted file mode 100644 index c6b46d4d7f..0000000000 --- a/board/qemu/mips64el-malta/linux-4.7.config +++ /dev/null @@ -1,35 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_MIPS64_R1=y -CONFIG_64BIT=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_MIPS32_COMPAT=y -CONFIG_MIPS32_O32=y -CONFIG_MIPS32_N32=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64el-malta/linux-4.8.config b/board/qemu/mips64el-malta/linux-4.8.config new file mode 100644 index 0000000000..c6b46d4d7f --- /dev/null +++ b/board/qemu/mips64el-malta/linux-4.8.config @@ -0,0 +1,35 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS64_R1=y +CONFIG_64BIT=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_MIPS32_COMPAT=y +CONFIG_MIPS32_O32=y +CONFIG_MIPS32_N32=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64r6-malta/linux-4.7.config b/board/qemu/mips64r6-malta/linux-4.7.config deleted file mode 100644 index 0ebfdbdb05..0000000000 --- a/board/qemu/mips64r6-malta/linux-4.7.config +++ /dev/null @@ -1,34 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS64_R6=y -CONFIG_64BIT=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_MIPS32_COMPAT=y -CONFIG_MIPS32_O32=y -CONFIG_MIPS32_N32=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64r6-malta/linux-4.8.config b/board/qemu/mips64r6-malta/linux-4.8.config new file mode 100644 index 0000000000..0ebfdbdb05 --- /dev/null +++ b/board/qemu/mips64r6-malta/linux-4.8.config @@ -0,0 +1,34 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS64_R6=y +CONFIG_64BIT=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_MIPS32_COMPAT=y +CONFIG_MIPS32_O32=y +CONFIG_MIPS32_N32=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64r6-malta/readme.txt b/board/qemu/mips64r6-malta/readme.txt index 8f792a0ac1..4a6c5fe798 100644 --- a/board/qemu/mips64r6-malta/readme.txt +++ b/board/qemu/mips64r6-malta/readme.txt @@ -1,7 +1,10 @@ Run the emulation with: - qemu-system-mips64 -M malta -cpu MIPS64R6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -nographic + qemu-system-mips64 -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -nographic The login prompt will appear in the terminal that started Qemu. -Tested with QEMU 2.6.0 +Tested with QEMU 2.7.0 + +Might work with 2.6.0 by changing the -cpu entry to MIPS64R6-generic +since the naming was updated and the old name removed in 2.7.0 diff --git a/board/qemu/mips64r6el-malta/linux-4.7.config b/board/qemu/mips64r6el-malta/linux-4.7.config deleted file mode 100644 index 0ebfdbdb05..0000000000 --- a/board/qemu/mips64r6el-malta/linux-4.7.config +++ /dev/null @@ -1,34 +0,0 @@ -CONFIG_MIPS_MALTA=y -CONFIG_CPU_MIPS64_R6=y -CONFIG_64BIT=y -CONFIG_MIPS_MT_SMP=y -CONFIG_NR_CPUS=2 -CONFIG_SYSVIPC=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_MIPS32_COMPAT=y -CONFIG_MIPS32_O32=y -CONFIG_MIPS32_N32=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_GENERIC=y -CONFIG_BLK_DEV_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_FB=y -CONFIG_FB_CIRRUS=y -CONFIG_USB=y -CONFIG_USB_UHCI_HCD=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64r6el-malta/linux-4.8.config b/board/qemu/mips64r6el-malta/linux-4.8.config new file mode 100644 index 0000000000..0ebfdbdb05 --- /dev/null +++ b/board/qemu/mips64r6el-malta/linux-4.8.config @@ -0,0 +1,34 @@ +CONFIG_MIPS_MALTA=y +CONFIG_CPU_MIPS64_R6=y +CONFIG_64BIT=y +CONFIG_MIPS_MT_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_SYSVIPC=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_MIPS32_COMPAT=y +CONFIG_MIPS32_O32=y +CONFIG_MIPS32_N32=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_GENERIC=y +CONFIG_BLK_DEV_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_FB=y +CONFIG_FB_CIRRUS=y +CONFIG_USB=y +CONFIG_USB_UHCI_HCD=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/mips64r6el-malta/readme.txt b/board/qemu/mips64r6el-malta/readme.txt index 3459a87768..b1dc23a22f 100644 --- a/board/qemu/mips64r6el-malta/readme.txt +++ b/board/qemu/mips64r6el-malta/readme.txt @@ -1,7 +1,10 @@ Run the emulation with: - qemu-system-mips64el -M malta -cpu MIPS64R6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -nographic + qemu-system-mips64el -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "root=/dev/hda" -nographic The login prompt will appear in the terminal that started Qemu. Tested with QEMU 2.6.0 + +Might work with 2.6.0 by changing the -cpu entry to MIPS64R6-generic +since the naming was updated and the old name removed in 2.7.0 diff --git a/board/qemu/ppc-g3beige/linux-4.7.config b/board/qemu/ppc-g3beige/linux-4.7.config deleted file mode 100644 index 7994553544..0000000000 --- a/board/qemu/ppc-g3beige/linux-4.7.config +++ /dev/null @@ -1,25 +0,0 @@ -CONFIG_ALTIVEC=y -CONFIG_SYSVIPC=y -CONFIG_HIGHMEM=y -CONFIG_YENTA=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IDE=y -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_CMD64X=y -CONFIG_BLK_DEV_IDE_PMAC=y -CONFIG_ADB=y -CONFIG_ADB_CUDA=y -CONFIG_ADB_PMU=y -CONFIG_NETDEVICES=y -CONFIG_PCNET32=y -CONFIG_8139CP=y -CONFIG_SERIAL_PMACZILOG=y -CONFIG_SERIAL_PMACZILOG_TTYS=y -CONFIG_SERIAL_PMACZILOG_CONSOLE=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_BOOTX_TEXT=y diff --git a/board/qemu/ppc-g3beige/linux-4.8.config b/board/qemu/ppc-g3beige/linux-4.8.config new file mode 100644 index 0000000000..7994553544 --- /dev/null +++ b/board/qemu/ppc-g3beige/linux-4.8.config @@ -0,0 +1,25 @@ +CONFIG_ALTIVEC=y +CONFIG_SYSVIPC=y +CONFIG_HIGHMEM=y +CONFIG_YENTA=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IDE=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_CMD64X=y +CONFIG_BLK_DEV_IDE_PMAC=y +CONFIG_ADB=y +CONFIG_ADB_CUDA=y +CONFIG_ADB_PMU=y +CONFIG_NETDEVICES=y +CONFIG_PCNET32=y +CONFIG_8139CP=y +CONFIG_SERIAL_PMACZILOG=y +CONFIG_SERIAL_PMACZILOG_TTYS=y +CONFIG_SERIAL_PMACZILOG_CONSOLE=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_BOOTX_TEXT=y diff --git a/board/qemu/ppc-mpc8544ds/linux-4.7.config b/board/qemu/ppc-mpc8544ds/linux-4.7.config deleted file mode 100644 index b36847c93d..0000000000 --- a/board/qemu/ppc-mpc8544ds/linux-4.7.config +++ /dev/null @@ -1,38 +0,0 @@ -CONFIG_PPC_85xx=y -CONFIG_PHYS_64BIT=y -CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio" -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MPC8540_ADS=y -CONFIG_MPC85xx_DS=y -CONFIG_HIGHMEM=y -CONFIG_MATH_EMULATION=y -CONFIG_PCI=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCI_MSI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_NETDEVICES=y -CONFIG_E1000=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=6 -CONFIG_SERIAL_8250_RUNTIME_UARTS=6 -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_OHCI_HCD=y -CONFIG_TMPFS=y diff --git a/board/qemu/ppc-mpc8544ds/linux-4.8.config b/board/qemu/ppc-mpc8544ds/linux-4.8.config new file mode 100644 index 0000000000..b36847c93d --- /dev/null +++ b/board/qemu/ppc-mpc8544ds/linux-4.8.config @@ -0,0 +1,38 @@ +CONFIG_PPC_85xx=y +CONFIG_PHYS_64BIT=y +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="${BR_BINARIES_DIR}/rootfs.cpio" +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MPC8540_ADS=y +CONFIG_MPC85xx_DS=y +CONFIG_HIGHMEM=y +CONFIG_MATH_EMULATION=y +CONFIG_PCI=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCI_MSI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=6 +CONFIG_SERIAL_8250_RUNTIME_UARTS=6 +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_FSL=y +CONFIG_USB_OHCI_HCD=y +CONFIG_TMPFS=y diff --git a/board/qemu/ppc-virtex-ml507/linux-4.7.config b/board/qemu/ppc-virtex-ml507/linux-4.7.config deleted file mode 100644 index ed4eb792b6..0000000000 --- a/board/qemu/ppc-virtex-ml507/linux-4.7.config +++ /dev/null @@ -1,36 +0,0 @@ -CONFIG_44x=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_EBONY is not set -CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y -CONFIG_MATH_EMULATION=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_XILINX_SYSACE=y -CONFIG_NETDEVICES=y -CONFIG_SERIO_XILINX_XPS_PS2=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_UARTLITE=y -CONFIG_SERIAL_UARTLITE_CONSOLE=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_XILINX_HWICAP=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_XILINX=y -CONFIG_FB=y -CONFIG_FB_XILINX=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_EXT4_FS=y -CONFIG_AUTOFS4_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y diff --git a/board/qemu/ppc-virtex-ml507/linux-4.8.config b/board/qemu/ppc-virtex-ml507/linux-4.8.config new file mode 100644 index 0000000000..ed4eb792b6 --- /dev/null +++ b/board/qemu/ppc-virtex-ml507/linux-4.8.config @@ -0,0 +1,36 @@ +CONFIG_44x=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_EBONY is not set +CONFIG_XILINX_VIRTEX440_GENERIC_BOARD=y +CONFIG_MATH_EMULATION=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_XILINX_SYSACE=y +CONFIG_NETDEVICES=y +CONFIG_SERIO_XILINX_XPS_PS2=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_UARTLITE=y +CONFIG_SERIAL_UARTLITE_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_XILINX_HWICAP=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_XILINX=y +CONFIG_FB=y +CONFIG_FB_XILINX=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_EXT4_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y diff --git a/board/qemu/sh4-r2d/linux-4.7.config b/board/qemu/sh4-r2d/linux-4.7.config deleted file mode 100644 index a3d6544549..0000000000 --- a/board/qemu/sh4-r2d/linux-4.7.config +++ /dev/null @@ -1,38 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_MODULES=y -CONFIG_CPU_SUBTYPE_SH7751R=y -CONFIG_MEMORY_START=0x0c000000 -CONFIG_FLATMEM_MANUAL=y -CONFIG_SH_RTS7751R2D=y -CONFIG_RTS7751R2D_PLUS=y -CONFIG_HEARTBEAT=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_PATA_PLATFORM=y -CONFIG_NETDEVICES=y -CONFIG_8139CP=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_CONSOLE=y -CONFIG_SPI=y -CONFIG_SPI_SH_SCI=y -CONFIG_MFD_SM501=y -CONFIG_FB=y -CONFIG_FB_SH_MOBILE_LCDC=y -CONFIG_FB_SH_MOBILE_HDMI=y -CONFIG_FB_SM501=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -CONFIG_SOUND=y -CONFIG_SND_YMFPCI=y -CONFIG_SOUND_PRIME=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_R9701=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sh4-r2d/linux-4.8.config b/board/qemu/sh4-r2d/linux-4.8.config new file mode 100644 index 0000000000..a3d6544549 --- /dev/null +++ b/board/qemu/sh4-r2d/linux-4.8.config @@ -0,0 +1,38 @@ +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_CPU_SUBTYPE_SH7751R=y +CONFIG_MEMORY_START=0x0c000000 +CONFIG_FLATMEM_MANUAL=y +CONFIG_SH_RTS7751R2D=y +CONFIG_RTS7751R2D_PLUS=y +CONFIG_HEARTBEAT=y +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_PLATFORM=y +CONFIG_NETDEVICES=y +CONFIG_8139CP=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SPI=y +CONFIG_SPI_SH_SCI=y +CONFIG_MFD_SM501=y +CONFIG_FB=y +CONFIG_FB_SH_MOBILE_LCDC=y +CONFIG_FB_SH_MOBILE_HDMI=y +CONFIG_FB_SM501=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND_YMFPCI=y +CONFIG_SOUND_PRIME=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_R9701=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sh4eb-r2d/linux-4.7.config b/board/qemu/sh4eb-r2d/linux-4.7.config deleted file mode 100644 index 6ead626c41..0000000000 --- a/board/qemu/sh4eb-r2d/linux-4.7.config +++ /dev/null @@ -1,38 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_MODULES=y -CONFIG_CPU_SUBTYPE_SH7751R=y -CONFIG_MEMORY_START=0x0c000000 -CONFIG_FLATMEM_MANUAL=y -CONFIG_CPU_BIG_ENDIAN=y -CONFIG_SH_RTS7751R2D=y -CONFIG_RTS7751R2D_PLUS=y -CONFIG_HEARTBEAT=y -CONFIG_PCI=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_PATA_PLATFORM=y -CONFIG_NETDEVICES=y -CONFIG_8139CP=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_CONSOLE=y -CONFIG_SPI=y -CONFIG_SPI_SH_SCI=y -CONFIG_MFD_SM501=y -CONFIG_FB=y -CONFIG_FB_SH_MOBILE_LCDC=y -CONFIG_FB_SH_MOBILE_HDMI=y -CONFIG_FB_SM501=y -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_LOGO=y -CONFIG_SND_YMFPCI=y -CONFIG_SOUND_PRIME=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_R9701=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sh4eb-r2d/linux-4.8.config b/board/qemu/sh4eb-r2d/linux-4.8.config new file mode 100644 index 0000000000..6ead626c41 --- /dev/null +++ b/board/qemu/sh4eb-r2d/linux-4.8.config @@ -0,0 +1,38 @@ +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_CPU_SUBTYPE_SH7751R=y +CONFIG_MEMORY_START=0x0c000000 +CONFIG_FLATMEM_MANUAL=y +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_SH_RTS7751R2D=y +CONFIG_RTS7751R2D_PLUS=y +CONFIG_HEARTBEAT=y +CONFIG_PCI=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_PLATFORM=y +CONFIG_NETDEVICES=y +CONFIG_8139CP=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SPI=y +CONFIG_SPI_SH_SCI=y +CONFIG_MFD_SM501=y +CONFIG_FB=y +CONFIG_FB_SH_MOBILE_LCDC=y +CONFIG_FB_SH_MOBILE_HDMI=y +CONFIG_FB_SM501=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_LOGO=y +CONFIG_SND_YMFPCI=y +CONFIG_SOUND_PRIME=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_R9701=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sparc-ss10/linux-4.7.config b/board/qemu/sparc-ss10/linux-4.7.config deleted file mode 100644 index cb8d01dc02..0000000000 --- a/board/qemu/sparc-ss10/linux-4.7.config +++ /dev/null @@ -1,31 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_PCI=y -CONFIG_SUN_OPENPROMFS=m -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_WIRELESS is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_SUNESP=y -CONFIG_NETDEVICES=y -CONFIG_SUNLANCE=y -# CONFIG_WLAN is not set -CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_SUNKBD=y -CONFIG_MOUSE_SERIAL=y -CONFIG_SERIAL_SUNZILOG=y -CONFIG_SERIAL_SUNZILOG_CONSOLE=y -CONFIG_SERIAL_SUNSU=y -CONFIG_SERIAL_SUNSU_CONSOLE=y -CONFIG_SUN_OPENPROMIO=m -CONFIG_EXT4_FS=y -CONFIG_ISO9660_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sparc-ss10/linux-4.8.config b/board/qemu/sparc-ss10/linux-4.8.config new file mode 100644 index 0000000000..cb8d01dc02 --- /dev/null +++ b/board/qemu/sparc-ss10/linux-4.8.config @@ -0,0 +1,31 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_PCI=y +CONFIG_SUN_OPENPROMFS=m +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_WIRELESS is not set +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SR=y +CONFIG_CHR_DEV_SG=y +CONFIG_SCSI_SUNESP=y +CONFIG_NETDEVICES=y +CONFIG_SUNLANCE=y +# CONFIG_WLAN is not set +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_SUNKBD=y +CONFIG_MOUSE_SERIAL=y +CONFIG_SERIAL_SUNZILOG=y +CONFIG_SERIAL_SUNZILOG_CONSOLE=y +CONFIG_SERIAL_SUNSU=y +CONFIG_SERIAL_SUNSU_CONSOLE=y +CONFIG_SUN_OPENPROMIO=m +CONFIG_EXT4_FS=y +CONFIG_ISO9660_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/sparc64-sun4u/linux-4.7.config b/board/qemu/sparc64-sun4u/linux-4.7.config deleted file mode 100644 index 0e1e16879d..0000000000 --- a/board/qemu/sparc64-sun4u/linux-4.7.config +++ /dev/null @@ -1,25 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_NO_HZ_IDLE=y -CONFIG_EMBEDDED=y -CONFIG_MODULES=y -CONFIG_PCI=y -CONFIG_SUN_OPENPROMFS=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_PATA_CMD64X=y -CONFIG_NETDEVICES=y -CONFIG_E1000=y -CONFIG_SERIAL_SUNSU=y -CONFIG_SERIAL_SUNSU_CONSOLE=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf-8" -CONFIG_MAGIC_SYSRQ=y diff --git a/board/qemu/sparc64-sun4u/linux-4.8.config b/board/qemu/sparc64-sun4u/linux-4.8.config new file mode 100644 index 0000000000..0e1e16879d --- /dev/null +++ b/board/qemu/sparc64-sun4u/linux-4.8.config @@ -0,0 +1,25 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ_IDLE=y +CONFIG_EMBEDDED=y +CONFIG_MODULES=y +CONFIG_PCI=y +CONFIG_SUN_OPENPROMFS=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_BLK_DEV_SD=y +CONFIG_ATA=y +CONFIG_PATA_CMD64X=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_SERIAL_SUNSU=y +CONFIG_SERIAL_SUNSU_CONSOLE=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf-8" +CONFIG_MAGIC_SYSRQ=y diff --git a/board/qemu/x86/linux-4.7.config b/board/qemu/x86/linux-4.7.config deleted file mode 120000 index 22732f69a8..0000000000 --- a/board/qemu/x86/linux-4.7.config +++ /dev/null @@ -1 +0,0 @@ -../x86_64/linux-4.7.config \ No newline at end of file diff --git a/board/qemu/x86/linux-4.8.config b/board/qemu/x86/linux-4.8.config new file mode 120000 index 0000000000..fca759e105 --- /dev/null +++ b/board/qemu/x86/linux-4.8.config @@ -0,0 +1 @@ +../x86_64/linux-4.8.config \ No newline at end of file diff --git a/board/qemu/x86_64/linux-4.7.config b/board/qemu/x86_64/linux-4.7.config deleted file mode 100644 index e3bd1454e6..0000000000 --- a/board/qemu/x86_64/linux-4.7.config +++ /dev/null @@ -1,45 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_SMP=y -CONFIG_HYPERVISOR_GUEST=y -CONFIG_PARAVIRT=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_VIRTIO_BLK=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_VIRTIO=y -CONFIG_ATA=y -CONFIG_ATA_PIIX=y -CONFIG_NETDEVICES=y -CONFIG_VIRTIO_NET=y -CONFIG_NE2K_PCI=y -CONFIG_8139CP=y -CONFIG_INPUT_EVDEV=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_VIRTIO_CONSOLE=y -CONFIG_HW_RANDOM_VIRTIO=m -CONFIG_DRM=y -CONFIG_DRM_BOCHS=y -CONFIG_DRM_QXL=y -CONFIG_DRM_VIRTIO_GPU=y -CONFIG_SOUND=y -CONFIG_SND=y -CONFIG_SND_HDA_INTEL=y -CONFIG_SND_HDA_GENERIC=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_UHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_VIRTIO_PCI=y -CONFIG_VIRTIO_BALLOON=y -CONFIG_VIRTIO_INPUT=y -CONFIG_VIRTIO_MMIO=y -CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y -CONFIG_EXT4_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/x86_64/linux-4.8.config b/board/qemu/x86_64/linux-4.8.config new file mode 100644 index 0000000000..e3bd1454e6 --- /dev/null +++ b/board/qemu/x86_64/linux-4.8.config @@ -0,0 +1,45 @@ +CONFIG_SYSVIPC=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_SMP=y +CONFIG_HYPERVISOR_GUEST=y +CONFIG_PARAVIRT=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_VIRTIO_BLK=y +CONFIG_BLK_DEV_SD=y +CONFIG_SCSI_VIRTIO=y +CONFIG_ATA=y +CONFIG_ATA_PIIX=y +CONFIG_NETDEVICES=y +CONFIG_VIRTIO_NET=y +CONFIG_NE2K_PCI=y +CONFIG_8139CP=y +CONFIG_INPUT_EVDEV=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_VIRTIO_CONSOLE=y +CONFIG_HW_RANDOM_VIRTIO=m +CONFIG_DRM=y +CONFIG_DRM_BOCHS=y +CONFIG_DRM_QXL=y +CONFIG_DRM_VIRTIO_GPU=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_HDA_INTEL=y +CONFIG_SND_HDA_GENERIC=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_UHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_BALLOON=y +CONFIG_VIRTIO_INPUT=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y +CONFIG_EXT4_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y diff --git a/board/qemu/xtensa-lx60/linux-4.7-nommu.config b/board/qemu/xtensa-lx60/linux-4.7-nommu.config deleted file mode 100644 index 29f6fa4cb9..0000000000 --- a/board/qemu/xtensa-lx60/linux-4.7-nommu.config +++ /dev/null @@ -1,37 +0,0 @@ -CONFIG_NO_HZ_IDLE=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_XTENSA_VARIANT_CUSTOM=y -CONFIG_XTENSA_VARIANT_CUSTOM_NAME="dc233c" -# CONFIG_XTENSA_VARIANT_MMU is not set -CONFIG_XTENSA_UNALIGNED_USER=y -CONFIG_PREEMPT=y -# CONFIG_PCI is not set -CONFIG_XTENSA_PLATFORM_XTFPGA=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8" -CONFIG_DEFAULT_MEM_START=0x00000000 -CONFIG_BINFMT_FLAT=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -CONFIG_DNS_RESOLVER=y -# CONFIG_WIRELESS is not set -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_NETDEVICES=y -CONFIG_MARVELL_PHY=y -# CONFIG_WLAN is not set -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_TMPFS=y -CONFIG_FANOTIFY=y -CONFIG_PRINTK_TIME=y -# CONFIG_S32C1I_SELFTEST is not set diff --git a/board/qemu/xtensa-lx60/linux-4.7.config b/board/qemu/xtensa-lx60/linux-4.7.config deleted file mode 100644 index 2d8e58d782..0000000000 --- a/board/qemu/xtensa-lx60/linux-4.7.config +++ /dev/null @@ -1,36 +0,0 @@ -# CONFIG_SWAP is not set -# CONFIG_CROSS_MEMORY_ATTACH is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_XTENSA_VARIANT_DC233C=y -CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX=y -CONFIG_XTENSA_PLATFORM_XTFPGA=y -CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttyS0,38400" -# CONFIG_COMPACTION is not set -# CONFIG_BOUNCE is not set -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_NETDEVICES=y -# CONFIG_WLAN is not set -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set -CONFIG_SERIAL_8250_CONSOLE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_LD_NO_RELAX=y -# CONFIG_S32C1I_SELFTEST is not set diff --git a/board/qemu/xtensa-lx60/linux-4.8-nommu.config b/board/qemu/xtensa-lx60/linux-4.8-nommu.config new file mode 100644 index 0000000000..29f6fa4cb9 --- /dev/null +++ b/board/qemu/xtensa-lx60/linux-4.8-nommu.config @@ -0,0 +1,37 @@ +CONFIG_NO_HZ_IDLE=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_XTENSA_VARIANT_CUSTOM=y +CONFIG_XTENSA_VARIANT_CUSTOM_NAME="dc233c" +# CONFIG_XTENSA_VARIANT_MMU is not set +CONFIG_XTENSA_UNALIGNED_USER=y +CONFIG_PREEMPT=y +# CONFIG_PCI is not set +CONFIG_XTENSA_PLATFORM_XTFPGA=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8" +CONFIG_DEFAULT_MEM_START=0x00000000 +CONFIG_BINFMT_FLAT=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_IPV6 is not set +CONFIG_NETFILTER=y +CONFIG_DNS_RESOLVER=y +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_NETDEVICES=y +CONFIG_MARVELL_PHY=y +# CONFIG_WLAN is not set +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_HWMON is not set +# CONFIG_VGA_CONSOLE is not set +CONFIG_TMPFS=y +CONFIG_FANOTIFY=y +CONFIG_PRINTK_TIME=y +# CONFIG_S32C1I_SELFTEST is not set diff --git a/board/qemu/xtensa-lx60/linux-4.8.config b/board/qemu/xtensa-lx60/linux-4.8.config new file mode 100644 index 0000000000..2d8e58d782 --- /dev/null +++ b/board/qemu/xtensa-lx60/linux-4.8.config @@ -0,0 +1,36 @@ +# CONFIG_SWAP is not set +# CONFIG_CROSS_MEMORY_ATTACH is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_XTENSA_VARIANT_DC233C=y +CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX=y +CONFIG_XTENSA_PLATFORM_XTFPGA=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttyS0,38400" +# CONFIG_COMPACTION is not set +# CONFIG_BOUNCE is not set +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_NETDEVICES=y +# CONFIG_WLAN is not set +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_VGA_CONSOLE is not set +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_LD_NO_RELAX=y +# CONFIG_S32C1I_SELFTEST is not set diff --git a/configs/pc_x86_64_bios_defconfig b/configs/pc_x86_64_bios_defconfig index 020be85873..242d3bf52c 100644 --- a/configs/pc_x86_64_bios_defconfig +++ b/configs/pc_x86_64_bios_defconfig @@ -20,15 +20,15 @@ BR2_TARGET_ROOTFS_EXT2_4=y # BR2_TARGET_ROOTFS_TAR is not set BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image.sh" -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.8.config" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/pc/linux-extras.config" BR2_LINUX_KERNEL_INSTALL_TARGET=y diff --git a/configs/pc_x86_64_efi_defconfig b/configs/pc_x86_64_efi_defconfig index 131948817f..118cc5982b 100644 --- a/configs/pc_x86_64_efi_defconfig +++ b/configs/pc_x86_64_efi_defconfig @@ -23,15 +23,15 @@ BR2_TARGET_ROOTFS_EXT2_4=y # BR2_TARGET_ROOTFS_TAR is not set BR2_ROOTFS_POST_IMAGE_SCRIPT="board/pc/post-image.sh" -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.8.config" BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/pc/linux-extras.config" BR2_LINUX_KERNEL_INSTALL_TARGET=y diff --git a/configs/qemu_aarch64_virt_defconfig b/configs/qemu_aarch64_virt_defconfig index 2f5429b164..acde3547c8 100644 --- a/configs/qemu_aarch64_virt_defconfig +++ b/configs/qemu_aarch64_virt_defconfig @@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/aarch64-virt/linux-4.8.config" diff --git a/configs/qemu_arm_versatile_defconfig b/configs/qemu_arm_versatile_defconfig index 738c7277d5..452ed5f92e 100644 --- a/configs/qemu_arm_versatile_defconfig +++ b/configs/qemu_arm_versatile_defconfig @@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.8.config" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="versatile-pb" diff --git a/configs/qemu_arm_vexpress_defconfig b/configs/qemu_arm_vexpress_defconfig index 381c0eb795..e841bac5d3 100644 --- a/configs/qemu_arm_vexpress_defconfig +++ b/configs/qemu_arm_vexpress_defconfig @@ -13,13 +13,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_DEFCONFIG="vexpress" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="vexpress-v2p-ca9" diff --git a/configs/qemu_m68k_mcf5208_defconfig b/configs/qemu_m68k_mcf5208_defconfig index 659ae3d8e6..c6c9098c25 100644 --- a/configs/qemu_m68k_mcf5208_defconfig +++ b/configs/qemu_m68k_mcf5208_defconfig @@ -9,17 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_INITRAMFS=y # BR2_TARGET_ROOTFS_TAR is not set -BR2_GLOBAL_PATCH_DIR="board/qemu/m68k-mcf5208/patches" - -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-mcf5208/linux-4.8.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_m68k_q800_defconfig b/configs/qemu_m68k_q800_defconfig index 6ebd6fae3c..1d59d7746e 100644 --- a/configs/qemu_m68k_q800_defconfig +++ b/configs/qemu_m68k_q800_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/m68k-q800/linux-4.8.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_microblazebe_mmu_defconfig b/configs/qemu_microblazebe_mmu_defconfig index ecff6c3bd6..188304e6e9 100644 --- a/configs/qemu_microblazebe_mmu_defconfig +++ b/configs/qemu_microblazebe_mmu_defconfig @@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazebe-mmu/linux-4.8.config" BR2_LINUX_KERNEL_LINUX_BIN=y BR2_LINUX_KERNEL_PATCH="board/qemu/microblazebe-mmu/xilinx-xemaclite.patch" diff --git a/configs/qemu_microblazeel_mmu_defconfig b/configs/qemu_microblazeel_mmu_defconfig index 67534b3111..471d86ad30 100644 --- a/configs/qemu_microblazeel_mmu_defconfig +++ b/configs/qemu_microblazeel_mmu_defconfig @@ -10,14 +10,14 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyUL0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/microblazeel-mmu/linux-4.8.config" BR2_LINUX_KERNEL_LINUX_BIN=y BR2_LINUX_KERNEL_PATCH="board/qemu/microblazeel-mmu/xilinx-xemaclite.patch" diff --git a/configs/qemu_mips32r2_malta_defconfig b/configs/qemu_mips32r2_malta_defconfig index 7aa8fc0891..16cc0ca585 100644 --- a/configs/qemu_mips32r2_malta_defconfig +++ b/configs/qemu_mips32r2_malta_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2-malta/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2-malta/linux-4.8.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_mips32r2el_malta_defconfig b/configs/qemu_mips32r2el_malta_defconfig index 6c6b3cd422..a66bdbda34 100644 --- a/configs/qemu_mips32r2el_malta_defconfig +++ b/configs/qemu_mips32r2el_malta_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2el-malta/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r2el-malta/linux-4.8.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_mips32r6_malta_defconfig b/configs/qemu_mips32r6_malta_defconfig index bddde486d6..a74c101502 100644 --- a/configs/qemu_mips32r6_malta_defconfig +++ b/configs/qemu_mips32r6_malta_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6-malta/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6-malta/linux-4.8.config" BR2_LINUX_KERNEL_VMLINUX=y # Compiler diff --git a/configs/qemu_mips32r6el_malta_defconfig b/configs/qemu_mips32r6el_malta_defconfig index f0d64ffc27..5202e2c462 100644 --- a/configs/qemu_mips32r6el_malta_defconfig +++ b/configs/qemu_mips32r6el_malta_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6el-malta/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips32r6el-malta/linux-4.8.config" BR2_LINUX_KERNEL_VMLINUX=y # Compiler diff --git a/configs/qemu_mips64_malta_defconfig b/configs/qemu_mips64_malta_defconfig index 211bf01e23..92bacc07b6 100644 --- a/configs/qemu_mips64_malta_defconfig +++ b/configs/qemu_mips64_malta_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64-malta/linux-4.8.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_mips64el_malta_defconfig b/configs/qemu_mips64el_malta_defconfig index b80b3eb924..d3cac61c63 100644 --- a/configs/qemu_mips64el_malta_defconfig +++ b/configs/qemu_mips64el_malta_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64el-malta/linux-4.8.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_mips64r6_malta_defconfig b/configs/qemu_mips64r6_malta_defconfig index 43e141d6ac..c68d887798 100644 --- a/configs/qemu_mips64r6_malta_defconfig +++ b/configs/qemu_mips64r6_malta_defconfig @@ -10,15 +10,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6-malta/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6-malta/linux-4.8.config" BR2_LINUX_KERNEL_VMLINUX=y # Compiler diff --git a/configs/qemu_mips64r6el_malta_defconfig b/configs/qemu_mips64r6el_malta_defconfig index c3acc1cabb..c0ad30449f 100644 --- a/configs/qemu_mips64r6el_malta_defconfig +++ b/configs/qemu_mips64r6el_malta_defconfig @@ -10,15 +10,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6el-malta/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/mips64r6el-malta/linux-4.8.config" BR2_LINUX_KERNEL_VMLINUX=y # Compiler diff --git a/configs/qemu_ppc64_pseries_defconfig b/configs/qemu_ppc64_pseries_defconfig index 5c183573c0..810f6e6e18 100644 --- a/configs/qemu_ppc64_pseries_defconfig +++ b/configs/qemu_ppc64_pseries_defconfig @@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="hvc0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_DEFCONFIG="pseries" BR2_LINUX_KERNEL_VMLINUX=y diff --git a/configs/qemu_ppc_g3beige_defconfig b/configs/qemu_ppc_g3beige_defconfig index ab3276d710..d0cd2cc2a8 100644 --- a/configs/qemu_ppc_g3beige_defconfig +++ b/configs/qemu_ppc_g3beige_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-g3beige/linux-4.8.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_ppc_mpc8544ds_defconfig b/configs/qemu_ppc_mpc8544ds_defconfig index a77936f3b2..ed10eeeea2 100644 --- a/configs/qemu_ppc_mpc8544ds_defconfig +++ b/configs/qemu_ppc_mpc8544ds_defconfig @@ -9,15 +9,15 @@ BR2_SYSTEM_DHCP="eth0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-mpc8544ds/linux-4.8.config" BR2_LINUX_KERNEL_VMLINUX=y # Serial port config diff --git a/configs/qemu_ppc_virtex_ml507_defconfig b/configs/qemu_ppc_virtex_ml507_defconfig index d2581cbdb4..c8571b6a74 100644 --- a/configs/qemu_ppc_virtex_ml507_defconfig +++ b/configs/qemu_ppc_virtex_ml507_defconfig @@ -6,8 +6,8 @@ BR2_powerpc_440=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Use soft float BR2_SOFT_FLOAT=y @@ -15,9 +15,9 @@ BR2_SOFT_FLOAT=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/ppc-virtex-ml507/linux-4.8.config" BR2_LINUX_KERNEL_VMLINUX=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="virtex440-ml507" diff --git a/configs/qemu_sh4_r2d_defconfig b/configs/qemu_sh4_r2d_defconfig index ce387c27d0..11c4d26a19 100644 --- a/configs/qemu_sh4_r2d_defconfig +++ b/configs/qemu_sh4_r2d_defconfig @@ -10,13 +10,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Linux kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4-r2d/linux-4.8.config" BR2_LINUX_KERNEL_ZIMAGE=y diff --git a/configs/qemu_sh4eb_r2d_defconfig b/configs/qemu_sh4eb_r2d_defconfig index 246e39e313..e88b638193 100644 --- a/configs/qemu_sh4eb_r2d_defconfig +++ b/configs/qemu_sh4eb_r2d_defconfig @@ -9,13 +9,13 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttySC1" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Linux kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sh4eb-r2d/linux-4.8.config" BR2_LINUX_KERNEL_ZIMAGE=y diff --git a/configs/qemu_sparc64_sun4u_defconfig b/configs/qemu_sparc64_sun4u_defconfig index 288945b347..a4c0e96b36 100644 --- a/configs/qemu_sparc64_sun4u_defconfig +++ b/configs/qemu_sparc64_sun4u_defconfig @@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Linux kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc64-sun4u/linux-4.8.config" diff --git a/configs/qemu_sparc_ss10_defconfig b/configs/qemu_sparc_ss10_defconfig index 42efa481a1..0f3b474b14 100644 --- a/configs/qemu_sparc_ss10_defconfig +++ b/configs/qemu_sparc_ss10_defconfig @@ -9,12 +9,12 @@ BR2_SYSTEM_DHCP="eth0" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Linux kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/sparc-ss10/linux-4.8.config" diff --git a/configs/qemu_x86_64_defconfig b/configs/qemu_x86_64_defconfig index 40840bee59..8284d3fc5b 100644 --- a/configs/qemu_x86_64_defconfig +++ b/configs/qemu_x86_64_defconfig @@ -9,12 +9,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux-4.8.config" diff --git a/configs/qemu_x86_defconfig b/configs/qemu_x86_defconfig index a17ced44d5..0a4c6a8237 100644 --- a/configs/qemu_x86_defconfig +++ b/configs/qemu_x86_defconfig @@ -10,12 +10,12 @@ BR2_TARGET_GENERIC_GETTY_PORT="tty1" BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86/linux-4.8.config" diff --git a/configs/qemu_xtensa_lx60_defconfig b/configs/qemu_xtensa_lx60_defconfig index cf60100b44..020ea0cc75 100644 --- a/configs/qemu_xtensa_lx60_defconfig +++ b/configs/qemu_xtensa_lx60_defconfig @@ -16,15 +16,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4,8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.7.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.8.config" BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf" BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage" diff --git a/configs/qemu_xtensa_lx60_nommu_defconfig b/configs/qemu_xtensa_lx60_nommu_defconfig index ab9de6aa80..b2ff47942a 100644 --- a/configs/qemu_xtensa_lx60_nommu_defconfig +++ b/configs/qemu_xtensa_lx60_nommu_defconfig @@ -20,15 +20,15 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_ROOTFS_INITRAMFS=y -# Linux headers same as kernel, a 4.7 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y +# Linux headers same as kernel, a 4.8 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y # Kernel BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.1" BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y -BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.7-nommu.config" +BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/xtensa-lx60/linux-4.8-nommu.config" BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y BR2_LINUX_KERNEL_IMAGE_NAME="Image.elf" BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="zImage"