From: Jeffrey Wheat Date: Thu, 4 Nov 1993 16:43:25 +0000 (+0000) Subject: Changed RUNTESTFLAGS to RUNTEST_FLAGS X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=484fa12d0b710b6d791ac1c523986b8f4498f088;p=binutils-gdb.git Changed RUNTESTFLAGS to RUNTEST_FLAGS --- diff --git a/ChangeLog b/ChangeLog index b628ebd19e5..8ec2b71ec72 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,13 @@ +Thu Nov 04 08:08:04 1993 Jeffrey Wheat (cassidy@cygnus.com) + + * Makefile.in: Change RUNTESTFLAGS to RUNTEST_FLAGS + +Wed Nov 3 22:09:46 1993 Ken Raeburn (raeburn@rtl.cygnus.com) + + * Makefile.in (DISTDOCDIRS): New variable. + (taz): Edit local Makefile.in sooner, instead of proto-toplev + Makefile.in later. Build "info" and "dvi" in DISTDOCDIRS. + Wed Nov 3 21:31:52 1993 david d `zoo' zuhn (zoo@rtl.cygnus.com) * configure.in (hppa target): check the source directory for the diff --git a/Makefile.in b/Makefile.in index cf2c867c078..1401c15e0fe 100644 --- a/Makefile.in +++ b/Makefile.in @@ -90,6 +90,7 @@ M4 = `if [ -f $${rootme}/m4/m4 ] ; \ MAKEINFO = `if [ -f $${rootme}/texinfo/makeinfo/makeinfo ] ; \ then echo $${rootme}/texinfo/makeinfo/makeinfo ; \ else echo makeinfo ; fi` + # This just becomes part of the MAKEINFO definition passed down to # sub-makes. It lets flags be given on the command line while still # using the makeinfo from the object tree. @@ -249,7 +250,7 @@ BASE_FLAGS_TO_PASS = \ "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \ "EXPECT=$(EXPECT)" \ "RUNTEST=$(RUNTEST)" \ - "RUNTESTFLAGS=$(RUNTESTFLAGS)" \ + "RUNTEST_FLAGS=$(RUNTEST_FLAGS)" \ "XTRAFLAGS_FOR_TARGET=$(XTRAFLAGS)" \ "exec_prefix=$(exec_prefix)" \ "prefix=$(prefix)" \ @@ -1052,19 +1053,35 @@ SUPPORT_FILES = list-of-support-files-for-tool-in-question DISTSTUFFDIRS= ld gprof gdb libg++ binutils # Files where "byacc" (Cygnus version) should be changed to "bison -y" (FSF). DISTBISONFILES= binutils/Makefile.in gas/Makefile.in gdb/Makefile.in +# Directories where "info" and "dvi" should be built. +DISTDOCDIRS= ld gprof binutils gdb libg++ gas bfd .PHONY: taz -taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex texinfo/gpl.texinfo - # Do this first so "diststuff" files get built properly. +taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) \ + texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo + # Make sure "diststuff" files get built properly. for f in $(DISTBISONFILES) ; do \ if [ -r $$f ]; then \ sed '/^BISON *=.*$$/s/.*/BISON = bison -y/' <$$f >tmp ; \ mv -f tmp $$f ; \ else true; fi ; \ done + # Take out texinfo from a few places; make simple BISON=bison line. + sed -e '/^all\.normal: /s/\all-texinfo //' \ + -e '/^ install-texinfo /d' \ + -e '/^BISON = /,/^$$/d' \ + -e '/^# BISON:/s/.*/BISON = bison -y/' \ + tmp + mv -f tmp Makefile.in # ./configure sun4 + # Doc files don't change; include them in distribution. + for f in $(DISTDOCDIRS) ; do \ + if [ -r $$f/Makefile ]; then \ + (cd $$f ; $(MAKE) info dvi) || exit 1 ; \ + else true ; fi ; \ + done # Make links, and run "make diststuff" when needed. # The `echo' for setting `p' is to convert all whitespace to spaces. # Then the `case' further below should tell whether $$d is in @@ -1077,7 +1094,7 @@ taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex texinfo/gpl.texinfo case " $$p " in \ *" $$d "*) \ echo making diststuff in $$d ; \ - (cd $$d ; pwd ; $(MAKE) diststuff BISON="bison -y") || exit 1 ;; \ + (cd $$d ; pwd ; $(MAKE) diststuff ) || exit 1 ;; \ esac ; \ if [ -d $$d/proto-$$d.dir ]; then \ ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \ @@ -1099,17 +1116,10 @@ taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex texinfo/gpl.texinfo -e '/^host_libs=/s/glob //' \ proto-toplev/configure.in # - # Take out texinfo from a few places; make simple BISON=bison line. - rm proto-toplev/Makefile.in - sed -e '/^all\.normal: /s/\all-texinfo //' \ - -e '/^ install-texinfo /d' \ - -e '/^BISON = /,/^$$/d' \ - -e '/^# BISON:/s/.*/BISON = bison -y/' \ - proto-toplev/Makefile.in - # mkdir proto-toplev/texinfo ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/ ln -s ../../texinfo/gpl.texinfo proto-toplev/texinfo/ + ln -s ../../texinfo/lgpl.texinfo proto-toplev/texinfo/ ln -s ../../texinfo/tex3patch proto-toplev/texinfo/ chmod og=u `find . -print` (VER=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`; \ @@ -1118,29 +1128,33 @@ taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex texinfo/gpl.texinfo tar cfh - $(TOOL)-$$VER \ | $(GZIP) -v -9 >$(TOOL)-$$VER.tar.gz) -TEXINFO_SUPPORT= texinfo/texinfo.tex texinfo/gpl.texinfo +TEXINFO_SUPPORT= texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT) .PHONY: gas.tar.gz GAS_SUPPORT_DIRS= bfd include libiberty opcodes gas.tar.gz: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas - $(MAKE) -f Makefile.in taz SUPPORT_FILES="$(GAS_SUPPORT_DIRS)" TOOL=gas + $(MAKE) -f Makefile.in taz TOOL=gas \ + SUPPORT_FILES="$(GAS_SUPPORT_DIRS)" # The FSF "binutils" release includes gprof and ld. .PHONY: binutils.tar.gz BINUTILS_SUPPORT_DIRS= bfd include libiberty opcodes ld gprof binutils.tar.gz: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils - $(MAKE) -f Makefile.in taz SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)" TOOL=binutils + $(MAKE) -f Makefile.in taz TOOL=binutils \ + SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)" .PHONY: gas+binutils.tar.gz GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof gas+binutils.tar.gz: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas - $(MAKE) -f Makefile.in taz SUPPORT_FILES="$(GASB_SUPPORT_DIRS)" TOOL=gas + $(MAKE) -f Makefile.in taz TOOL=gas \ + SUPPORT_FILES="$(GASB_SUPPORT_DIRS)" .PHONY: libg++.tar.gz LIBGXX_SUPPORT_DIRS=include libio libiberty xiberty libg++.tar.gz: $(DIST_SUPPORT) libg++ - $(MAKE) -f Makefile.in taz SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)" TOOL=libg++ + $(MAKE) -f Makefile.in taz TOOL=libg++ \ + SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)" .NOEXPORT: MAKEOVERRIDES=