From: Shyam Saini Date: Mon, 22 Apr 2019 18:04:32 +0000 (+0530) Subject: configs/nanopi_m4: new defconfig X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=493c3979a4def978a1137cf8543bf0de50d2615e;p=buildroot.git configs/nanopi_m4: new defconfig This initial support includes: Custom u-boot Linux v5.1 ATF v2.0 Buildroot default packages Tested-by: Michael Trimarchi Signed-off-by: Shyam Saini [Thomas: - Use BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_1 - Use final 5.1 kernel - Use default ext2 filesystem] Signed-off-by: Thomas Petazzoni --- diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index 311ddb7780..b04bb74381 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -213,6 +213,7 @@ mx6udoo_defconfig: { extends: .defconfig } nanopc_t4_defconfig: { extends: .defconfig } nanopi_m1_defconfig: { extends: .defconfig } nanopi_m1_plus_defconfig: { extends: .defconfig } +nanopi_m4_defconfig: {extends: .defconfig} nanopi_neo_defconfig: { extends: .defconfig } nanopi_neo4_defconfig: { extends: .defconfig } nexbox_a95x_defconfig: { extends: .defconfig } diff --git a/DEVELOPERS b/DEVELOPERS index 2956528a8e..0638ef6120 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -2064,11 +2064,13 @@ F: package/ubus/ F: package/wolfssl/ N: Shyam Saini +F: board/friendlyarm/nanopi-m4/ F: board/friendlyarm/nanopi-neo4/ F: board/friendlyarm/nanopc-t4/ F: board/olimex/a33_olinuxino/ F: board/radxa/rock-pi4/ F: board/pine64/rockpro64/ +F: configs/nanopi_m4_defconfig F: configs/nanopi_neo4_defconfig F: configs/nanopc_t4_defconfig F: configs/olimex_a33_olinuxino_defconfig diff --git a/board/friendlyarm/nanopi-m4/extlinux.conf b/board/friendlyarm/nanopi-m4/extlinux.conf new file mode 100644 index 0000000000..e5861cdcbe --- /dev/null +++ b/board/friendlyarm/nanopi-m4/extlinux.conf @@ -0,0 +1,4 @@ +label NanoPi M4 5.1-rc1 + kernel /boot/Image + devicetree /boot/rk3399-nanopi-m4.dtb + append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p1 rootwait diff --git a/board/friendlyarm/nanopi-m4/genimage.cfg b/board/friendlyarm/nanopi-m4/genimage.cfg new file mode 100644 index 0000000000..6404b0ad3b --- /dev/null +++ b/board/friendlyarm/nanopi-m4/genimage.cfg @@ -0,0 +1,22 @@ +image sdcard.img { + hdimage { + } + + partition u-boot-spl-dtb { + in-partition-table = "no" + image = "u-boot-spl-dtb.img" + offset = 32K + } + + partition u-boot-dtb { + in-partition-table = "no" + image = "u-boot.itb" + offset = 8M + size = 30M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/friendlyarm/nanopi-m4/post-build.sh b/board/friendlyarm/nanopi-m4/post-build.sh new file mode 100755 index 0000000000..9b0c4ecc83 --- /dev/null +++ b/board/friendlyarm/nanopi-m4/post-build.sh @@ -0,0 +1,8 @@ +#!/bin/sh + +MKIMAGE=$HOST_DIR/bin/mkimage +BOARD_DIR="$(dirname $0)" + +$MKIMAGE -n rk3399 -T rksd -d $BINARIES_DIR/u-boot-spl-dtb.bin $BINARIES_DIR/u-boot-spl-dtb.img + +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf diff --git a/board/friendlyarm/nanopi-m4/readme.txt b/board/friendlyarm/nanopi-m4/readme.txt new file mode 100644 index 0000000000..97d5b86cb2 --- /dev/null +++ b/board/friendlyarm/nanopi-m4/readme.txt @@ -0,0 +1,45 @@ +Intro +===== + +NanoPi M4 is a RK3399 SoC based ARM board. + +Wiki: https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/nanopi_m4.html + +Build +===== + +Run NanoPi M4 configuration + + $ make nanopi_m4_defconfig + +To build, run make command. + + $ make + +Files created in output directory +================================= +output/images/ +├── bl31.bin +├── Image +├── rk3399-nanopi-m4.dtb +├── rootfs.ext2 +├── rootfs.ext4 -> rootfs.ext2 +├── rootfs.tar +├── sdcard.img +├── u-boot.bin +├── u-boot.itb +├── u-boot-spl-dtb.bin +└── u-boot-spl-dtb.img + +Creating bootable SD card: +========================= + +Simply invoke (as root) + + # dd if=output/images/sdcard.img of=/dev/sdX && sync + +Where X is your SD card device + +Serial console +-------------- +Baudrate for this board is 1500000 diff --git a/configs/nanopi_m4_defconfig b/configs/nanopi_m4_defconfig new file mode 100644 index 0000000000..1a14ae83fd --- /dev/null +++ b/configs/nanopi_m4_defconfig @@ -0,0 +1,54 @@ +# Architecture +BR2_aarch64=y +BR2_cortex_a72_a53=y + +# Linux headers same as kernel, a 5.1 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_1=y + +# Firmware +BR2_TARGET_ARM_TRUSTED_FIRMWARE=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/ARM-software/arm-trusted-firmware" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v2.0" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399" +BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31=y + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/amarula/u-boot-amarula.git" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="980ca75ae0438b4a1847d044605c492f3c844f88" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="nanopi-m4-rk3399" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y +BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y +BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb" +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl-dtb.bin" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.1" +BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-nanopi-m4" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y + +# Filesystem +BR2_TARGET_GENERIC_HOSTNAME="NanoPi M4" +BR2_TARGET_GENERIC_ISSUE="Welcome to NanoPi M4!" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/friendlyarm/nanopi-m4/genimage.cfg" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/friendlyarm/nanopi-m4/post-build.sh"