From: Steve Reinhardt Date: Sun, 8 Mar 2009 00:58:51 +0000 (-0800) Subject: Fix up regression execution to better handle tests that end abnormally. X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=4f1855484c1fe148d66b2dbc2dc0d7964b578c5c;p=gem5.git Fix up regression execution to better handle tests that end abnormally. E.g., mark aborts due to assertion failures as failed tests, but those that get killed by the user as needing to be rerun, etc. --- diff --git a/src/python/m5/config.py b/src/python/m5/config.py index 7fb531a18..c28f6675a 100644 --- a/src/python/m5/config.py +++ b/src/python/m5/config.py @@ -29,10 +29,18 @@ import os from os.path import isdir, isfile, join as joinpath -homedir = os.environ['HOME'] -confdir = os.environ.get('M5_CONFIG', joinpath(homedir, '.m5')) + +confdir = os.environ.get('M5_CONFIG') + +if not confdir: + # HOME is not set when running regressions, due to use of scons + # Execute() function. + homedir = os.environ.get('HOME') + if homedir and isdir(joinpath(homedir, '.m5')): + confdir = joinpath(homedir, '.m5') + def get(name): - if not isdir(confdir): + if not confdir: return None conffile = joinpath(confdir, name) if not isfile(conffile): diff --git a/tests/SConscript b/tests/SConscript index 016b3a26a..5c4a61e18 100644 --- a/tests/SConscript +++ b/tests/SConscript @@ -29,7 +29,7 @@ # Authors: Steve Reinhardt # Kevin Lim -import os +import os, signal import sys import glob from SCons.Script.SConscript import SConsEnvironment @@ -44,57 +44,113 @@ env.Tests = {} def contents(node): return file(str(node)).read() -def check_test(target, source, env): +# functions to parse return value from scons Execute()... not the same +# as wait() etc., so python built-in os funcs don't work. +def signaled(status): + return (status & 0x80) != 0; + +def signum(status): + return (status & 0x7f); + +# List of signals that indicate that we should retry the test rather +# than consider it failed. +retry_signals = (signal.SIGTERM, signal.SIGKILL, signal.SIGINT, + signal.SIGQUIT, signal.SIGHUP) + +# regular expressions of lines to ignore when diffing outputs +output_ignore_regexes = ( + '^command line:', # for stdout file + '^M5 compiled ', # for stderr file + '^M5 started ', # for stderr file + '^M5 executing on ', # for stderr file + '^Simulation complete at', # for stderr file + '^Listening for', # for stderr file + 'listening for remote gdb', # for stderr file + ) + +output_ignore_args = ' '.join(["-I '"+s+"'" for s in output_ignore_regexes]) + +output_ignore_args += ' --exclude=stats.txt --exclude=outdiff' + +def run_test(target, source, env): """Check output from running test. Targets are as follows: - target[0] : outdiff - target[1] : statsdiff - target[2] : status + target[0] : status + + Sources are: + source[0] : M5 binary + source[1] : tests/run.py script + source[2] : reference stats file """ # make sure target files are all gone for t in target: if os.path.exists(t.abspath): Execute(Delete(t.abspath)) - # Run diff on output & ref directories to find differences. - # Exclude the stats file since we will use diff-out on that. - Execute(env.subst('diff -ubr ${SOURCES[0].dir} ${SOURCES[1].dir} ' + - '-I "^command line:" ' + # for stdout file - '-I "^M5 compiled " ' + # for stderr file - '-I "^M5 started " ' + # for stderr file - '-I "^M5 executing on " ' + # for stderr file - '-I "^Simulation complete at" ' + # for stderr file - '-I "^Listening for" ' + # for stderr file - '-I "listening for remote gdb" ' + # for stderr file - '--exclude=stats.txt --exclude=SCCS ' + - '--exclude=${TARGETS[0].file} ' + - '> ${TARGETS[0]}', target=target, source=source), None) - print "===== Output differences =====" - print contents(target[0]) - # Run diff-out on stats.txt file - status = Execute(env.subst('$DIFFOUT $SOURCES > ${TARGETS[1]}', - target=target, source=source), - strfunction=None) - print "===== Statistics differences =====" - print contents(target[1]) - # Generate status file contents based on exit status of diff-out + + tgt_dir = os.path.dirname(str(target[0])) + + # Base command for running test. We mess around with indirectly + # referring to files via SOURCES and TARGETS so that scons can mess + # with paths all it wants to and we still get the right files. + cmd = '${SOURCES[0]} -d %s -re ${SOURCES[1]} %s' % (tgt_dir, tgt_dir) + + # Prefix test run with batch job submission command if appropriate. + # Batch command also supports timeout arg (in seconds, not minutes). + timeout = 15 * 60 # used to be a param, probably should be again + if env['BATCH']: + cmd = '%s -t %d %s' % (env['BATCH_CMD'], timeout, cmd) + + status = Execute(env.subst(cmd, target=target, source=source)) + if status == 0: + # M5 terminated normally. + # Run diff on output & ref directories to find differences. + # Exclude the stats file since we will use diff-out on that. + outdiff = os.path.join(tgt_dir, 'outdiff') + diffcmd = 'diff -ubr %s ${SOURCES[2].dir} %s > %s' \ + % (output_ignore_args, tgt_dir, outdiff) + Execute(env.subst(diffcmd, target=target, source=source)) + print "===== Output differences =====" + print contents(outdiff) + # Run diff-out on stats.txt file + statsdiff = os.path.join(tgt_dir, 'statsdiff') + diffcmd = '$DIFFOUT ${SOURCES[2]} %s > %s' \ + % (os.path.join(tgt_dir, 'stats.txt'), statsdiff) + diffcmd = env.subst(diffcmd, target=target, source=source) + status = Execute(diffcmd, strfunction=None) + print "===== Statistics differences =====" + print contents(statsdiff) + + else: # m5 exit status != 0 + # M5 did not terminate properly, so no need to check the output + if signaled(status) and signum(status) in retry_signals: + # Consider the test incomplete; don't create a 'status' output. + # Hand the return status to scons and let scons decide what + # to do about it (typically terminate unless run with -k). + print 'M5 terminated with signal', signum(status) + return status + # complete but failed execution (call to exit() with non-zero + # status, SIGABORT due to assertion failure, etc.)... fall through + # and generate FAILED status as if output comparison had failed + print 'M5 exited with non-zero status', status + + # Generate status file contents based on exit status of m5 or diff-out if status == 0: status_str = "passed." else: status_str = "FAILED!" - f = file(str(target[2]), 'w') - print >>f, env.subst('${TARGETS[2].dir}', target=target, source=source), \ - status_str + f = file(str(target[0]), 'w') + print >>f, tgt_dir, status_str f.close() # done return 0 -def check_test_string(target, source, env): - return env.subst("Comparing outputs in ${TARGETS[0].dir}.", +def run_test_string(target, source, env): + return env.subst("Running test in ${TARGETS[0].dir}.", target=target, source=source) -testAction = env.Action(check_test, check_test_string) +testAction = env.Action(run_test, run_test_string) def print_test(target, source, env): print '***** ' + contents(source[0]) @@ -174,24 +230,8 @@ def test_builder(env, ref_dir): new_stats = tgt('stats.txt') status_file = tgt('status') - # Base command for running test. We mess around with indirectly - # referring to files via SOURCES and TARGETS so that scons can - # mess with paths all it wants to and we still get the right - # files. - cmd = '${SOURCES[0]} -d $TARGET.dir -re ${SOURCES[1]} %s' % tgt_dir - - # Prefix test run with batch job submission command if appropriate. - # Batch command also supports timeout arg (in seconds, not minutes). - timeout = 15 * 60 # used to be a param, probably should be again - if env['BATCH']: - cmd = '%s -t %d %s' % (env['BATCH_CMD'], timeout, cmd) - - env.Command([tgt('simout'), tgt('simerr'), new_stats], - [env.M5Binary, 'run.py'], cmd) - - # order of targets is important... see check_test - env.Command([tgt('outdiff'), tgt('statsdiff'), status_file], - [ref_stats, new_stats], + env.Command([status_file], + [env.M5Binary, 'run.py', ref_stats], testAction) # phony target to echo status diff --git a/tests/run.py b/tests/run.py index aadc16b93..df26c88c5 100644 --- a/tests/run.py +++ b/tests/run.py @@ -34,7 +34,7 @@ import m5 m5.disableAllListeners() # single "path" arg encodes everything we need to know about test -(category, name, isa, opsys, config) = sys.argv[1].split('/') +(category, name, isa, opsys, config) = sys.argv[1].split('/')[-5:] # find path to directory containing this file tests_root = os.path.dirname(__file__)