From: Joyce Janczyn Date: Tue, 24 Mar 1998 20:16:25 +0000 (+0000) Subject: Add ability to configure mn10300 built with common simulator code base. X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=4f262a370da1735ff521f5de9248d23c33dba815;p=binutils-gdb.git Add ability to configure mn10300 built with common simulator code base. Use --enable-sim-common to build this way; default configure has not changed. --- diff --git a/sim/mn10300/configure b/sim/mn10300/configure index 47610362857..578206b9eed 100755 --- a/sim/mn10300/configure +++ b/sim/mn10300/configure @@ -71,12 +71,15 @@ + + + # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12.1 +# Generated automatically using autoconf version 2.12 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -100,6 +103,20 @@ ac_help="$ac_help --enable-sim-trace=opts Enable tracing flags" ac_help="$ac_help --enable-sim-profile=opts Enable profiling flags" +ac_help="$ac_help + --enable-sim-endian=endian Specify target byte endian orientation." +ac_help="$ac_help + --enable-sim-alignment=align Specify strict, nonstrict or forced alignment of memory accesses." +ac_help="$ac_help + --enable-sim-hostendian=end Specify host byte endian orientation." +ac_help="$ac_help + --enable-sim-warnings=opts Extra CFLAGS for turning on compiler warnings" +ac_help="$ac_help + --enable-sim-reserved-bits Specify whether to check reserved bits in instruction." +ac_help="$ac_help + --enable-sim-bitsize=N Specify target bitsize (32 or 64)." +ac_help="$ac_help + --enable-sim-common Enable common simulator" # Initialize some variables set by options. # The variables have the same names as the options, with @@ -138,7 +155,6 @@ mandir='${prefix}/man' # Initialize some other variables. subdirs= MFLAGS= MAKEFLAGS= -SHELL=${CONFIG_SHELL-/bin/sh} # Maximum number of lines to put in a shell here document. ac_max_here_lines=12 @@ -422,7 +438,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12.1" + echo "configure generated by autoconf version 2.12" exit 0 ;; -with-* | --with-*) @@ -610,7 +626,7 @@ fi echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:614: checking how to run the C preprocessor" >&5 +echo "configure:630: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -625,13 +641,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:635: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:651: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : @@ -642,13 +658,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:652: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:668: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then : @@ -716,33 +732,33 @@ esac # Make sure we can run config.sub. -if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then : +if $ac_config_sub sun4 >/dev/null 2>&1; then : else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:725: checking host system type" >&5 +echo "configure:741: checking host system type" >&5 host_alias=$host case "$host_alias" in NONE) case $nonopt in NONE) - if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then : + if host_alias=`$ac_config_guess`; then : else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; } fi ;; *) host_alias=$nonopt ;; esac ;; esac -host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias` +host=`$ac_config_sub $host_alias` host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:746: checking target system type" >&5 +echo "configure:762: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -753,14 +769,14 @@ NONE) esac ;; esac -target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias` +target=`$ac_config_sub $target_alias` target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:764: checking build system type" >&5 +echo "configure:780: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -771,7 +787,7 @@ NONE) esac ;; esac -build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias` +build=`$ac_config_sub $build_alias` build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` @@ -804,7 +820,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:808: checking for $ac_word" >&5 +echo "configure:824: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -833,7 +849,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:837: checking for $ac_word" >&5 +echo "configure:853: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -881,7 +897,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:885: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:901: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -891,11 +907,11 @@ ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:915: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -915,12 +931,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:919: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:935: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:924: checking whether we are using GNU C" >&5 +echo "configure:940: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -929,7 +945,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:933: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:949: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -944,7 +960,7 @@ if test $ac_cv_prog_gcc = yes; then ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:948: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:964: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -978,12 +994,11 @@ fi # SunOS /usr/etc/install # IRIX /sbin/install # AIX /bin/install -# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag # AFS /usr/afsws/bin/install, which mishandles nonexistent args # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:987: checking for a BSD compatible install" >&5 +echo "configure:1002: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -995,13 +1010,12 @@ else /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; *) # OSF1 and SCO ODT 3.0 have their own names for install. - # Don't use installbsd from OSF since it installs stuff as root - # by default. - for ac_prog in ginstall scoinst install; do + for ac_prog in ginstall installbsd scoinst install; do if test -f $ac_dir/$ac_prog; then if test $ac_prog = install && grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then # AIX install. It has an incompatible calling convention. + # OSF/1 installbsd also uses dspmsg, but is usable. : else ac_cv_path_install="$ac_dir/$ac_prog -c" @@ -1049,7 +1063,7 @@ AR=${AR-ar} # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1053: checking for $ac_word" >&5 +echo "configure:1067: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1079,21 +1093,101 @@ fi # Check for common headers. # FIXME: Seems to me this can cause problems for i386-windows hosts. # At one point there were hardcoded AC_DEFINE's if ${host} = i386-*-windows*. -for ac_hdr in stdlib.h string.h strings.h unistd.h time.h sys/time.h sys/resource.h +for ac_hdr in stdlib.h string.h strings.h unistd.h time.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:1101: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1111: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <&6 +fi +done + +for ac_hdr in sys/time.h sys/resource.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:1141: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:1151: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <&6 +fi +done + +for ac_hdr in fcntl.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1087: checking for $ac_hdr" >&5 +echo "configure:1181: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1097: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1191: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* @@ -1122,12 +1216,12 @@ done for ac_func in getrusage time sigaction do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:1126: checking for $ac_func" >&5 +echo "configure:1220: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1248: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -1179,11 +1273,12 @@ done +USE_MAINTAINER_MODE=no # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" case "${enableval}" in - yes) MAINT="" ;; + yes) MAINT="" USE_MAINTAINER_MODE=yes ;; no) MAINT="#" ;; *) { echo "configure: error: "--enable-maintainer-mode does not take a value"" 1>&2; exit 1; }; MAINT="#" ;; esac @@ -1322,12 +1417,12 @@ fi echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6 -echo "configure:1326: checking return type of signal handlers" >&5 +echo "configure:1421: checking return type of signal handlers" >&5 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -1344,7 +1439,7 @@ int main() { int i; ; return 0; } EOF -if { (eval echo configure:1348: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:1443: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_type_signal=void else @@ -1384,21 +1479,379 @@ sim_link_links="${sim_link_links} targ-vals.def" -for ac_hdr in unistd.h + +wire_endian="LITTLE_ENDIAN" +default_endian="" +# Check whether --enable-sim-endian or --disable-sim-endian was given. +if test "${enable_sim_endian+set}" = set; then + enableval="$enable_sim_endian" + case "${enableval}" in + b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; + l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; + yes) if test x"$wire_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + else + if test x"$default_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=${default_endian}" + else + echo "No hard-wired endian for target $target" 1>&6 + sim_endian="-DWITH_TARGET_BYTE_ORDER=0" + fi + fi;; + no) if test x"$default_endian" != x; then + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" + else + if test x"$wire_endian" != x; then + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${wire_endian}" + else + echo "No default endian for target $target" 1>&6 + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=0" + fi + fi;; + *) { echo "configure: error: "Unknown value $enableval for --enable-sim-endian"" 1>&2; exit 1; }; sim_endian="";; +esac +if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then + echo "Setting endian flags = $sim_endian" 6>&1 +fi +else + if test x"$default_endian" != x; then + sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=${default_endian}" +else + if test x"$wire_endian" != x; then + sim_endian="-DWITH_TARGET_BYTE_ORDER=${wire_endian}" + else + sim_endian= + fi +fi +fi + +wire_alignment="NONSTRICT_ALIGNMENT" +default_alignment="" + +# Check whether --enable-sim-alignment or --disable-sim-alignment was given. +if test "${enable_sim_alignment+set}" = set; then + enableval="$enable_sim_alignment" + case "${enableval}" in + strict | STRICT) sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";; + nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";; + forced | FORCED) sim_alignment="-DWITH_ALIGNMENT=FORCED_ALIGNMENT";; + yes) if test x"$wire_alignment" != x; then + sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}" + else + if test x"$default_alignment" != x; then + sim_alignment="-DWITH_ALIGNMENT=${default_alignment}" + else + echo "No hard-wired alignment for target $target" 1>&6 + sim_alignment="-DWITH_ALIGNMENT=0" + fi + fi;; + no) if test x"$default_alignment" != x; then + sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}" + else + if test x"$wire_alignment" != x; then + sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${wire_alignment}" + else + echo "No default alignment for target $target" 1>&6 + sim_alignment="-DWITH_DEFAULT_ALIGNMENT=0" + fi + fi;; + *) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-alignment"" 1>&2; exit 1; }; sim_alignment="";; +esac +if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then + echo "Setting alignment flags = $sim_alignment" 6>&1 +fi +else + if test x"$default_alignment" != x; then + sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}" +else + if test x"$wire_alignment" != x; then + sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}" + else + sim_alignment= + fi +fi +fi + + +# Check whether --enable-sim-hostendian or --disable-sim-hostendian was given. +if test "${enable_sim_hostendian+set}" = set; then + enableval="$enable_sim_hostendian" + case "${enableval}" in + no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; + b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; + l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; + *) { echo "configure: error: "Unknown value $enableval for --enable-sim-hostendian"" 1>&2; exit 1; }; sim_hostendian="";; +esac +if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then + echo "Setting hostendian flags = $sim_hostendian" 6>&1 +fi +else + +if test "x$cross_compiling" = "xno"; then + echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6 +echo "configure:1593: checking whether byte ordering is bigendian" >&5 +if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_cv_c_bigendian=unknown +# See if sys/param.h defines the BYTE_ORDER macro. +cat > conftest.$ac_ext < +#include +int main() { + +#if !BYTE_ORDER || !BIG_ENDIAN || !LITTLE_ENDIAN + bogus endian macros +#endif +; return 0; } +EOF +if { (eval echo configure:1611: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + # It does; now see whether it defined to BIG_ENDIAN or not. +cat > conftest.$ac_ext < +#include +int main() { + +#if BYTE_ORDER != BIG_ENDIAN + not big endian +#endif +; return 0; } +EOF +if { (eval echo configure:1626: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_c_bigendian=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_c_bigendian=no +fi +rm -f conftest* +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* +if test $ac_cv_c_bigendian = unknown; then +if test "$cross_compiling" = yes; then + { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; } +else + cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +then + ac_cv_c_bigendian=no +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -fr conftest* + ac_cv_c_bigendian=yes +fi +rm -fr conftest* +fi + +fi +fi + +echo "$ac_t""$ac_cv_c_bigendian" 1>&6 +if test $ac_cv_c_bigendian = yes; then + cat >> confdefs.h <<\EOF +#define WORDS_BIGENDIAN 1 +EOF + +fi + + if test $ac_cv_c_bigendian = yes; then + sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" + else + sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" + fi +else + sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" +fi +fi + + +# Check whether --enable-sim-warnings or --disable-sim-warnings was given. +if test "${enable_sim_warnings+set}" = set; then + enableval="$enable_sim_warnings" + case "${enableval}" in + yes) sim_warnings="-Werror -Wall -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations ";; + no) sim_warnings="-w";; + *) sim_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;; +esac +if test x"$silent" != x"yes" && test x"$sim_warnings" != x""; then + echo "Setting warning flags = $sim_warnings" 6>&1 +fi +else + sim_warnings="" +fi + + +default_sim_reserved_bits="1" +# Check whether --enable-sim-reserved-bits or --disable-sim-reserved-bits was given. +if test "${enable_sim_reserved_bits+set}" = set; then + enableval="$enable_sim_reserved_bits" + case "${enableval}" in + yes) sim_reserved_bits="-DWITH_RESERVED_BITS=1";; + no) sim_reserved_bits="-DWITH_RESERVED_BITS=0";; + *) { echo "configure: error: "--enable-sim-reserved-bits does not take a value"" 1>&2; exit 1; }; sim_reserved_bits="";; +esac +if test x"$silent" != x"yes" && test x"$sim_reserved_bits" != x""; then + echo "Setting reserved flags = $sim_reserved_bits" 6>&1 +fi +else + sim_reserved_bits="-DWITH_RESERVED_BITS=${default_sim_reserved_bits}" +fi + +wire_word_bitsize="32" +wire_word_msb="31" +wire_address_bitsize="" +wire_cell_bitsize="" +# Check whether --enable-sim-bitsize or --disable-sim-bitsize was given. +if test "${enable_sim_bitsize+set}" = set; then + enableval="$enable_sim_bitsize" + sim_bitsize= +case "${enableval}" in + 64,63 | 64,63,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63";; + 32,31 | 32,31,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31";; + 64,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";; + 32,0 | 64,0,* ) sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0";; + 32) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then + sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=31" + else + sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=32 -DWITH_TARGET_WORD_MSB=0" + fi ;; + 64) if test x"$wire_word_msb" != x -a x"$wire_word_msb" != x0; then + sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=63" + else + sim_bitsize="-DWITH_TARGET_WORD_BITSIZE=64 -DWITH_TARGET_WORD_MSB=0" + fi ;; + *) { echo "configure: error: "--enable-sim-bitsize was given $enableval. Expected 32 or 64"" 1>&2; exit 1; } ;; +esac +# address bitsize +tmp=`echo "${enableval}" | sed -e "s/^[0-9]*,*[0-9]*,*//"` +case x"${tmp}" in + x ) ;; + x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=32" ;; + x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_ADDRESS_BITSIZE=64" ;; + * ) { echo "configure: error: "--enable-sim-bitsize was given address size $enableval. Expected 32 or 64"" 1>&2; exit 1; } ;; +esac +# cell bitsize +tmp=`echo "${enableval}" | sed -e "s/^[0-9]*,*[0-9*]*,*[0-9]*,*//"` +case x"${tmp}" in + x ) ;; + x32 | x32,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=32" ;; + x64 | x64,* ) sim_bitsize="${sim_bitsize} -DWITH_TARGET_CELL_BITSIZE=64" ;; + * ) { echo "configure: error: "--enable-sim-bitsize was given cell size $enableval. Expected 32 or 64"" 1>&2; exit 1; } ;; +esac +if test x"$silent" != x"yes" && test x"$sim_bitsize" != x""; then + echo "Setting bitsize flags = $sim_bitsize" 6>&1 +fi +else + sim_bitsize="" +if test x"$wire_word_bitsize" != x; then + sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_BITSIZE=$wire_word_bitsize" +fi +if test x"$wire_word_msb" != x; then + sim_bitsize="$sim_bitsize -DWITH_TARGET_WORD_MSB=$wire_word_msb" +fi +if test x"$wire_address_bitsize" != x; then + sim_bitsize="$sim_bitsize -DWITH_TARGET_ADDRESS_BITSIZE=$wire_address_bitsize" +fi +if test x"$wire_cell_bitsize" != x; then + sim_bitsize="$sim_bitsize -DWITH_TARGET_CELL_BITSIZE=$wire_cell_bitsize" +fi +fi + + +for ac_func in time chmod utime fork execve execv chown +do +echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +echo "configure:1789: checking for $ac_func" >&5 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +$ac_func(); +#endif + +; return 0; } +EOF +if { (eval echo configure:1817: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then + rm -rf conftest* + eval "ac_cv_func_$ac_func=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_$ac_func=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` + cat >> confdefs.h <&6 +fi +done + +for ac_hdr in unistd.h stdlib.h string.h strings.h utime.h time.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1392: checking for $ac_hdr" >&5 +echo "configure:1845: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1402: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1855: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out` if test -z "$ac_err"; then rm -rf conftest* @@ -1425,6 +1878,26 @@ fi done +# +# Enable common +# +# Check whether --enable-sim-common or --disable-sim-common was given. +if test "${enable_sim_common+set}" = set; then + enableval="$enable_sim_common" + case "${enableval}" in + yes) sim_gen="-DWITH_COMMON=1"; mn10300_common="WITH";; + no) sim_gen="-DWITH_COMMON=0"; mn10300_common="WITHOUT";; + *) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-common"" 1>&2; exit 1; }; sim_gen="";; +esac +if test x"$silent" != x"yes" && test x"$sim_gen" != x""; then + echo "Setting sim_common = $sim_common" 6>&1 +fi +else + sim_gen=""; mn10300_common="WITHOUT" +fi + + + trap '' 1 2 15 @@ -1450,7 +1923,7 @@ EOF # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1 | grep ac_space` in + case `(ac_space=' '; set) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). @@ -1517,7 +1990,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12.1" + echo "$CONFIG_STATUS generated by autoconf version 2.12" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -1547,6 +2020,9 @@ s%@sim_float@%$sim_float%g s%@sim_scache@%$sim_scache%g s%@sim_default_model@%$sim_default_model%g s%@sim_hardware@%$sim_hardware%g +s%@sim_hw_obj@%$sim_hw_obj%g +s%@sim_dv_src@%$sim_dv_src%g +s%@sim_dv_obj@%$sim_dv_obj%g s%@sim_inline@%$sim_inline%g s%@sim_packages@%$sim_packages%g s%@sim_regparm@%$sim_regparm%g @@ -1555,7 +2031,6 @@ s%@sim_smp@%$sim_smp%g s%@sim_stdcall@%$sim_stdcall%g s%@sim_xor_endian@%$sim_xor_endian%g s%@sim_warnings@%$sim_warnings%g -s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g @@ -1607,6 +2082,8 @@ s%@sim_debug@%$sim_debug%g s%@sim_stdio@%$sim_stdio%g s%@sim_trace@%$sim_trace%g s%@sim_profile@%$sim_profile%g +s%@sim_gen@%$sim_gen%g +s%@mn10300_common@%$mn10300_common%g CEOF EOF diff --git a/sim/mn10300/configure.in b/sim/mn10300/configure.in index 033b0bc1615..2a5719ac58e 100644 --- a/sim/mn10300/configure.in +++ b/sim/mn10300/configure.in @@ -5,6 +5,30 @@ AC_INIT(Makefile.in) SIM_AC_COMMON -AC_CHECK_HEADERS(unistd.h) +SIM_AC_OPTION_ENDIAN(LITTLE_ENDIAN) +SIM_AC_OPTION_ALIGNMENT(NONSTRICT_ALIGNMENT) +SIM_AC_OPTION_HOSTENDIAN +SIM_AC_OPTION_WARNINGS +SIM_AC_OPTION_RESERVED_BITS +SIM_AC_OPTION_BITSIZE(32,31) + +AC_CHECK_FUNCS(time chmod utime fork execve execv chown) +AC_CHECK_HEADERS(unistd.h stdlib.h string.h strings.h utime.h time.h) + +# +# Enable common +# +AC_ARG_ENABLE(sim-common, +[ --enable-sim-common Enable common simulator], +[case "${enableval}" in + yes) sim_gen="-DWITH_COMMON=1"; mn10300_common="WITH";; + no) sim_gen="-DWITH_COMMON=0"; mn10300_common="WITHOUT";; + *) AC_MSG_ERROR("Unknown value $enableval passed to --enable-sim-common"); sim_gen="";; +esac +if test x"$silent" != x"yes" && test x"$sim_gen" != x""; then + echo "Setting sim_common = $sim_common" 6>&1 +fi],[sim_gen=""; mn10300_common="WITHOUT"])dnl +AC_SUBST(sim_gen) +AC_SUBST(mn10300_common) SIM_AC_OUTPUT