From: Andrew Burgess Date: Wed, 17 Nov 2021 17:17:37 +0000 (+0000) Subject: gdb/remote: some fixes for 'maint set target-async off' X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=4f626cad041b96f78bae75a2d24d1573f382e12b;p=binutils-gdb.git gdb/remote: some fixes for 'maint set target-async off' While working on another patch relating to remote targets, I wanted to test with 'maint set target-async off' in place. Unfortunately I ran into some problems. This commit is an attempt to fix one of the issues I hit. In my particular case I was actually running with: maint set target-async off maint set target-non-stop off that is, we're telling GDB to force the targets to operate in non-async mode, and in all-stop mode. Here's my GDB session showing the problem: (gdb) maintenance set target-async off (gdb) maintenance set target-non-stop off (gdb) target extended-remote :54321 Remote debugging using :54321 (gdb) attach 2365960 Attaching to process 2365960 No unwaited-for children left. (gdb) Notice the 'No unwaited-for children left.' error, this is the problem. There's no reason why GDB should not be able to attach to the process. The problem is this: 1. The user runs 'attach PID' and this sends GDB into attach_command in infcmd.c. From here we call the ::attach method on the attach target, which will be the extended_remote_target. 2. In extended_remote_target::attach, we attach to the remote target and get the first reply (which is a stop packet). We put off processing the stop packet until the end of ::attach. We setup the inferior and thread to represent the process we attached to, and download the target description. Finally, we process the initial stop packet. If '!target_is_non_stop_p ()' and '!target_can_async_p ()', which is the case for us given the maintenance commands we used, we cache the stop packet within the remote_state::buf for later processing. 3. Back in attach_command, if 'target_is_non_stop_p ()' then we request that the target stops. This will either process any cached stop replies, or request that the target stops, and process the stop replies. However, this code is not what we use due to non-stop mode being disabled. So, we skip to the next step which is to call validate_exec_file. 4. Calling validate_exec_file can cause packets to be sent to the remote target, and replies received, the first path I hit is the call to target_pid_to_exec_file, which calls remote_target::pid_to_exec_file, which can then try to read the executable from the remote. Sending an receiving packets will make use of the remote_state::buf object. 5. The attempt to attach continues, but the damage is already done... So, the problem is that, in step #2 we cache a stop reply in the remote_state::buf, and then in step #4 we reuse the remote_state::buf object, discarding any cached stop reply. As a result, the initial stop, which is sent when GDB first attaches to the target, is lost. This problem can clearly be seen, I feel, by looking at the remote_state::cached_wait_status flag. This flag tells GDB if there is a wait status cached in remote_state::buf. However, in remote_target::putpkt_binary and remote_target::getpkt_or_notif_sane_1 this flag is just set back to 0, doing this immediately discards any cached data. I don't know if this scheme ever made sense, looking at commit 2d717e4f8a54, where the cached_wait_status flag was added, it appears that there was nothing between where the stop was cached, and where the stop was consumed, so, I suspect, there never was a situation where we ended up in putpkt_binary or getpkt_or_notif_sane_1 and needed to clear to the flag, maybe the clearing was added "just in case". Whatever the history, I claim that this clearing this flag is no longer a good idea. So, my first step toward fixing this issue was to replace the two instances of 'rs->cached_wait_status = 0;' in ::putpkt_binary and ::getpkt_or_notif_sane_1 with 'gdb_assert (rs->cached_wait_status == 0);', this, at least would show me when GDB was doing something dangerous, and indeed, this assert is now hit in my test case above. I did play with using some kind of scoped restore to backup, and restore the remote_state::buf object in all the places within remote.c that I was hitting where the ::buf was being corrupted. The first problem with this is that, where the ::cached_wait_status flag is reset is _not_ where ::buf is corrupted. For the ::putpkt_binary case, by the time we get to the method the buffer has already been corrupted in many cases, so we end up needing to add the scoped save/restore within the callers, which means we need the save/restore in _lots_ of places. Plus, using this save/restore model feels like the wrong solution. I don't think that it's obvious that the buffer might be holding cached data, and I think it would be too easy for new corruptions of the buffer to be introduced, which could easily go unnoticed for a long time. So, I really wanted a solution that didn't require us to cache data in the ::buf object. Luckily, I think we already have such a solution in place, the remote_state::stop_reply_queue, it seems like this does exactly the same task, just in a slightly different way. With the ::stop_reply_queue, the stop packets are processed upon receipt and the stop_reply object is added to the queue. With the ::buf cache solution, the unprocessed stop reply is cached in the ::buf, and processed later. So, finally, in this commit, I propose to remove the remote_state::cached_wait_status flag and to stop using the ::buf to cache stop replies. Instead, stop replies will now always be stored in the ::stop_reply_queue. There are two places where we use the ::buf to hold a cached stop reply, the first is in the ::attach method, and the second is in remote_target::start_remote, however, the second of these cases is far less problematic, as after caching the stop reply in ::buf we call the global start_remote function, which does very little work before calling normal_stop, which processes the cached stop reply. However, my plan is to switch both users over to using ::stop_reply_queue so that the old (unsafe) ::cached_wait_status mechanism can be completely removed. The next problem is that the ::stop_reply_queue is currently only used for async-mode, and so, in remote_target::push_stop_reply, where we push stop_reply objects into the ::stop_reply_queue, we currently also mark the async event token. I've modified this so we only mark the async event token if 'target_is_async_p ()' - note, _is_, not _can_ here. The ::push_stop_reply method is called in places where async mode has been temporarily disabled, but, when async mode is switched back on (see remote_target::async) we will mark the event token if there are events in the queue. Another change of interest is in remote_target::remote_interrupt_as. Previously this code checked ::cached_wait_status, but didn't check for events in the ::stop_reply_queue. Now that ::cached_wait_status has been removed we now check the queue length instead, which should have the same result. Finally, in remote_target::wait_as, I've tried to merge the processing of the ::stop_reply_queue with how we used to handle the ::cached_wait_status flag. Currently, when processing the ::stop_reply_queue we call process_stop_reply and immediately return. However, when handling ::cached_wait_status we run through the whole of ::wait_as, and return at the end of the function. If we consider a standard stop packet, the two differences I see are: 1. Resetting of the remote_state::waiting_for_stop_reply, flag; this is not currently done when processing a stop from the ::stop_reply_queue. 2. The final return value has the possibility of being adjusted at the end of ::wait_as, as well as there being calls to record_currthread, non of which are done if we process a stop from the ::stop_reply_queue. After discussion on the mailing list: https://sourceware.org/pipermail/gdb-patches/2021-December/184535.html it was suggested that, when an event is pushed into the ::stop_reply_queue, the ::waiting_for_stop_reply flag is never going to be set. As a result, we don't need to worry about the first difference. I have however, added a gdb_assert to validate the assumption that the flag is never going to be set. If in future the situation ever changes, then we should find out pretty quickly. As for the second difference, I have resolved this by having all stop packets taken from the ::stop_reply_queue, pass through the return value adjustment code at the end of ::wait_as. An example of a test that reveals the benefits of this commit is: make check-gdb \ RUNTESTFLAGS="--target_board=native-extended-gdbserver \ GDBFLAGS='-ex maint\ set\ target-async\ off \ -ex maint\ set\ target-non-stop\ off' \ gdb.base/attach.exp" For testing I've been running test on x86-64/GNU Linux, and run with target boards unix, native-gdbserver, and native-extended-gdbserver. For each board I've run with the default GDBFLAGS, as well as with: GDBFLAGS='-ex maint\ set\ target-async\ off \ -ex maint\ set\ target-non-stop\ off' \ Though running with the above GDBFLAGS is clearly a lot more unstable both before and after my patch, I'm not seeing any consistent new failures with my patch, except, with the native-extended-gdbserver board, where I am seeing new failures, but only because more tests are now running. For that configuration alone I see the number of unresolved go down by 49, the number of passes goes up by 446, and the number of failures also increases by 144. All of the failures are new tests as far as I can tell. --- diff --git a/gdb/remote.c b/gdb/remote.c index 1f977d57fba..f0f3dcbabb0 100644 --- a/gdb/remote.c +++ b/gdb/remote.c @@ -258,15 +258,6 @@ public: /* data */ Otherwise zero, meaning to use the guessed size. */ long explicit_packet_size = 0; - /* remote_wait is normally called when the target is running and - waits for a stop reply packet. But sometimes we need to call it - when the target is already stopped. We can send a "?" packet - and have remote_wait read the response. Or, if we already have - the response, we can stash it in BUF and tell remote_wait to - skip calling getpkt. This flag is set when BUF contains a - stop reply packet and the target is not waiting. */ - int cached_wait_status = 0; - /* True, if in no ack mode. That is, neither GDB nor the stub will expect acks from each other. The connection is assumed to be reliable. */ @@ -4969,8 +4960,9 @@ remote_target::start_remote_1 (int from_tty, int extended_p) /* Use the previously fetched status. */ gdb_assert (wait_status != NULL); - strcpy (rs->buf.data (), wait_status); - rs->cached_wait_status = 1; + struct notif_event *reply + = remote_notif_parse (this, ¬if_client_stop, wait_status); + push_stop_reply ((struct stop_reply *) reply); ::start_remote (from_tty); /* Initialize gdb process mechanisms. */ } @@ -5804,7 +5796,6 @@ remote_target::open_1 (const char *name, int from_tty, int extended_p) /* Reset the target state; these things will be queried either by remote_query_supported or as they are needed. */ reset_all_packet_configs_support (); - rs->cached_wait_status = 0; rs->explicit_packet_size = 0; rs->noack_mode = 0; rs->extended = extended_p; @@ -6199,21 +6190,13 @@ extended_remote_target::attach (const char *args, int from_tty) /* Use the previously fetched status. */ gdb_assert (wait_status != NULL); - if (target_can_async_p ()) - { - struct notif_event *reply - = remote_notif_parse (this, ¬if_client_stop, wait_status); + struct notif_event *reply + = remote_notif_parse (this, ¬if_client_stop, wait_status); - push_stop_reply ((struct stop_reply *) reply); + push_stop_reply ((struct stop_reply *) reply); - target_async (1); - } - else - { - gdb_assert (wait_status != NULL); - strcpy (rs->buf.data (), wait_status); - rs->cached_wait_status = 1; - } + if (target_can_async_p ()) + target_async (1); } else { @@ -7084,9 +7067,9 @@ remote_target::remote_interrupt_as () rs->ctrlc_pending_p = 1; /* If the inferior is stopped already, but the core didn't know - about it yet, just ignore the request. The cached wait status + about it yet, just ignore the request. The pending stop events will be collected in remote_wait. */ - if (rs->cached_wait_status) + if (stop_reply_queue_length () > 0) return; /* Send interrupt_sequence to remote target. */ @@ -7480,7 +7463,7 @@ remote_target::queued_stop_reply (ptid_t ptid) remote_state *rs = get_remote_state (); struct stop_reply *r = remote_notif_remove_queued_reply (ptid); - if (!rs->stop_reply_queue.empty ()) + if (!rs->stop_reply_queue.empty () && target_can_async_p ()) { /* There's still at least an event left. */ mark_async_event_handler (rs->remote_async_inferior_event_token); @@ -7505,7 +7488,12 @@ remote_target::push_stop_reply (struct stop_reply *new_event) target_pid_to_str (new_event->ptid).c_str (), int (rs->stop_reply_queue.size ())); - mark_async_event_handler (rs->remote_async_inferior_event_token); + /* Mark the pending event queue only if async mode is currently enabled. + If async mode is not currently enabled, then, if it later becomes + enabled, and there are events in this queue, we will mark the event + token at that point, see remote_target::async. */ + if (target_is_async_p ()) + mark_async_event_handler (rs->remote_async_inferior_event_token); } /* Returns true if we have a stop reply for PTID. */ @@ -8214,15 +8202,14 @@ remote_target::wait_as (ptid_t ptid, target_waitstatus *status, stop_reply = queued_stop_reply (ptid); if (stop_reply != NULL) - return process_stop_reply (stop_reply, status); - - if (rs->cached_wait_status) - /* Use the cached wait status, but only once. */ - rs->cached_wait_status = 0; + { + /* None of the paths that push a stop reply onto the queue should + have set the waiting_for_stop_reply flag. */ + gdb_assert (!rs->waiting_for_stop_reply); + event_ptid = process_stop_reply (stop_reply, status); + } else { - int ret; - int is_notif; int forever = ((options & TARGET_WNOHANG) == 0 && rs->wait_forever_enabled_p); @@ -8236,7 +8223,8 @@ remote_target::wait_as (ptid_t ptid, target_waitstatus *status, _never_ wait for ever -> test on target_is_async_p(). However, before we do that we need to ensure that the caller knows how to take the target into/out of async mode. */ - ret = getpkt_or_notif_sane (&rs->buf, forever, &is_notif); + int is_notif; + int ret = getpkt_or_notif_sane (&rs->buf, forever, &is_notif); /* GDB gets a notification. Return to core as this event is not interesting. */ @@ -8245,73 +8233,73 @@ remote_target::wait_as (ptid_t ptid, target_waitstatus *status, if (ret == -1 && (options & TARGET_WNOHANG) != 0) return minus_one_ptid; - } - buf = rs->buf.data (); + buf = rs->buf.data (); - /* Assume that the target has acknowledged Ctrl-C unless we receive - an 'F' or 'O' packet. */ - if (buf[0] != 'F' && buf[0] != 'O') - rs->ctrlc_pending_p = 0; + /* Assume that the target has acknowledged Ctrl-C unless we receive + an 'F' or 'O' packet. */ + if (buf[0] != 'F' && buf[0] != 'O') + rs->ctrlc_pending_p = 0; - switch (buf[0]) - { - case 'E': /* Error of some sort. */ - /* We're out of sync with the target now. Did it continue or - not? Not is more likely, so report a stop. */ - rs->waiting_for_stop_reply = 0; + switch (buf[0]) + { + case 'E': /* Error of some sort. */ + /* We're out of sync with the target now. Did it continue or + not? Not is more likely, so report a stop. */ + rs->waiting_for_stop_reply = 0; - warning (_("Remote failure reply: %s"), buf); - status->set_stopped (GDB_SIGNAL_0); - break; - case 'F': /* File-I/O request. */ - /* GDB may access the inferior memory while handling the File-I/O - request, but we don't want GDB accessing memory while waiting - for a stop reply. See the comments in putpkt_binary. Set - waiting_for_stop_reply to 0 temporarily. */ - rs->waiting_for_stop_reply = 0; - remote_fileio_request (this, buf, rs->ctrlc_pending_p); - rs->ctrlc_pending_p = 0; - /* GDB handled the File-I/O request, and the target is running - again. Keep waiting for events. */ - rs->waiting_for_stop_reply = 1; - break; - case 'N': case 'T': case 'S': case 'X': case 'W': - { - /* There is a stop reply to handle. */ - rs->waiting_for_stop_reply = 0; + warning (_("Remote failure reply: %s"), buf); + status->set_stopped (GDB_SIGNAL_0); + break; + case 'F': /* File-I/O request. */ + /* GDB may access the inferior memory while handling the File-I/O + request, but we don't want GDB accessing memory while waiting + for a stop reply. See the comments in putpkt_binary. Set + waiting_for_stop_reply to 0 temporarily. */ + rs->waiting_for_stop_reply = 0; + remote_fileio_request (this, buf, rs->ctrlc_pending_p); + rs->ctrlc_pending_p = 0; + /* GDB handled the File-I/O request, and the target is running + again. Keep waiting for events. */ + rs->waiting_for_stop_reply = 1; + break; + case 'N': case 'T': case 'S': case 'X': case 'W': + { + /* There is a stop reply to handle. */ + rs->waiting_for_stop_reply = 0; - stop_reply - = (struct stop_reply *) remote_notif_parse (this, - ¬if_client_stop, - rs->buf.data ()); + stop_reply + = (struct stop_reply *) remote_notif_parse (this, + ¬if_client_stop, + rs->buf.data ()); - event_ptid = process_stop_reply (stop_reply, status); - break; - } - case 'O': /* Console output. */ - remote_console_output (buf + 1); - break; - case '\0': - if (rs->last_sent_signal != GDB_SIGNAL_0) - { - /* Zero length reply means that we tried 'S' or 'C' and the - remote system doesn't support it. */ - target_terminal::ours_for_output (); - printf_filtered - ("Can't send signals to this remote system. %s not sent.\n", - gdb_signal_to_name (rs->last_sent_signal)); - rs->last_sent_signal = GDB_SIGNAL_0; - target_terminal::inferior (); - - strcpy (buf, rs->last_sent_step ? "s" : "c"); - putpkt (buf); + event_ptid = process_stop_reply (stop_reply, status); + break; + } + case 'O': /* Console output. */ + remote_console_output (buf + 1); + break; + case '\0': + if (rs->last_sent_signal != GDB_SIGNAL_0) + { + /* Zero length reply means that we tried 'S' or 'C' and the + remote system doesn't support it. */ + target_terminal::ours_for_output (); + printf_filtered + ("Can't send signals to this remote system. %s not sent.\n", + gdb_signal_to_name (rs->last_sent_signal)); + rs->last_sent_signal = GDB_SIGNAL_0; + target_terminal::inferior (); + + strcpy (buf, rs->last_sent_step ? "s" : "c"); + putpkt (buf); + break; + } + /* fallthrough */ + default: + warning (_("Invalid remote reply: %s"), buf); break; } - /* fallthrough */ - default: - warning (_("Invalid remote reply: %s"), buf); - break; } if (status->kind () == TARGET_WAITKIND_NO_RESUMED) @@ -9596,10 +9584,6 @@ remote_target::putpkt_binary (const char *buf, int cnt) "and then try again.")); } - /* We're sending out a new packet. Make sure we don't look at a - stale cached response. */ - rs->cached_wait_status = 0; - /* Copy the packet into buffer BUF2, encapsulating it and giving it a checksum. */ @@ -9937,10 +9921,6 @@ remote_target::getpkt_or_notif_sane_1 (gdb::char_vector *buf, int timeout; int val = -1; - /* We're reading a new response. Make sure we don't look at a - previously cached response. */ - rs->cached_wait_status = 0; - strcpy (buf->data (), "timeout"); if (forever)