From: whitequark Date: Tue, 4 Jun 2019 09:47:29 +0000 (+0000) Subject: Extract from nMigen. X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=50403d6846ede8fac502fc919bae91d74875cb72;p=nmigen-boards.git Extract from nMigen. --- 50403d6846ede8fac502fc919bae91d74875cb72 diff --git a/.gitattributes b/.gitattributes new file mode 100644 index 0000000..f7b6e40 --- /dev/null +++ b/.gitattributes @@ -0,0 +1 @@ +nmigen_boards/_version.py export-subst diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..ab7547c --- /dev/null +++ b/.gitignore @@ -0,0 +1,3 @@ +*.pyc +*.egg-info +/build diff --git a/LICENSE.txt b/LICENSE.txt new file mode 100644 index 0000000..147ab4f --- /dev/null +++ b/LICENSE.txt @@ -0,0 +1,28 @@ +Copyright (C) 2011-2019 M-Labs Limited + +Redistribution and use in source and binary forms, with or without modification, +are permitted provided that the following conditions are met: + +1. Redistributions of source code must retain the above copyright notice, this + list of conditions and the following disclaimer. +2. Redistributions in binary form must reproduce the above copyright notice, + this list of conditions and the following disclaimer in the documentation + and/or other materials provided with the distribution. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR +ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +Other authors retain ownership of their contributions. If a submission can +reasonably be considered independently copyrightable, it's yours and we +encourage you to claim it with appropriate copyright notices. This submission +then falls under the "otherwise noted" category. All submissions are strongly +encouraged to use the two-clause BSD license reproduced above. diff --git a/README.md b/README.md new file mode 100644 index 0000000..1dd5851 --- /dev/null +++ b/README.md @@ -0,0 +1,11 @@ +# nMigen boards and connectors + +## Ready to use board and connector pinouts, and programming scripts + +TBD + +### License + +nMigen is released under the very permissive two-clause BSD license. Under the terms of this license, you are authorized to use nMigen for closed-source proprietary designs. + +See LICENSE file for full copyright and license info. diff --git a/nmigen_boards/__init__.py b/nmigen_boards/__init__.py new file mode 100644 index 0000000..e69de29 diff --git a/nmigen_boards/_version.py b/nmigen_boards/_version.py new file mode 100644 index 0000000..f875c24 --- /dev/null +++ b/nmigen_boards/_version.py @@ -0,0 +1,520 @@ + +# This file helps to compute a version number in source trees obtained from +# git-archive tarball (such as those provided by githubs download-from-tag +# feature). Distribution tarballs (built by setup.py sdist) and build +# directories (produced by setup.py build) will contain a much shorter file +# that just contains the computed version number. + +# This file is released into the public domain. Generated by +# versioneer-0.18 (https://github.com/warner/python-versioneer) + +"""Git implementation of _version.py.""" + +import errno +import os +import re +import subprocess +import sys + + +def get_keywords(): + """Get the keywords needed to look up the version information.""" + # these strings will be replaced by git during git-archive. + # setup.py/versioneer.py will grep for the variable names, so they must + # each be defined on a line of their own. _version.py will just call + # get_keywords(). + git_refnames = "$Format:%d$" + git_full = "$Format:%H$" + git_date = "$Format:%ci$" + keywords = {"refnames": git_refnames, "full": git_full, "date": git_date} + return keywords + + +class VersioneerConfig: + """Container for Versioneer configuration parameters.""" + + +def get_config(): + """Create, populate and return the VersioneerConfig() object.""" + # these strings are filled in when 'setup.py versioneer' creates + # _version.py + cfg = VersioneerConfig() + cfg.VCS = "git" + cfg.style = "git-describe-long" + cfg.tag_prefix = "v" + cfg.parentdir_prefix = "nmigen_boards-" + cfg.versionfile_source = "nmigen_boards/_version.py" + cfg.verbose = False + return cfg + + +class NotThisMethod(Exception): + """Exception raised if a method is not valid for the current scenario.""" + + +LONG_VERSION_PY = {} +HANDLERS = {} + + +def register_vcs_handler(vcs, method): # decorator + """Decorator to mark a method as the handler for a particular VCS.""" + def decorate(f): + """Store f in HANDLERS[vcs][method].""" + if vcs not in HANDLERS: + HANDLERS[vcs] = {} + HANDLERS[vcs][method] = f + return f + return decorate + + +def run_command(commands, args, cwd=None, verbose=False, hide_stderr=False, + env=None): + """Call the given command(s).""" + assert isinstance(commands, list) + p = None + for c in commands: + try: + dispcmd = str([c] + args) + # remember shell=False, so use git.cmd on windows, not just git + p = subprocess.Popen([c] + args, cwd=cwd, env=env, + stdout=subprocess.PIPE, + stderr=(subprocess.PIPE if hide_stderr + else None)) + break + except EnvironmentError: + e = sys.exc_info()[1] + if e.errno == errno.ENOENT: + continue + if verbose: + print("unable to run %s" % dispcmd) + print(e) + return None, None + else: + if verbose: + print("unable to find command, tried %s" % (commands,)) + return None, None + stdout = p.communicate()[0].strip() + if sys.version_info[0] >= 3: + stdout = stdout.decode() + if p.returncode != 0: + if verbose: + print("unable to run %s (error)" % dispcmd) + print("stdout was %s" % stdout) + return None, p.returncode + return stdout, p.returncode + + +def versions_from_parentdir(parentdir_prefix, root, verbose): + """Try to determine the version from the parent directory name. + + Source tarballs conventionally unpack into a directory that includes both + the project name and a version string. We will also support searching up + two directory levels for an appropriately named parent directory + """ + rootdirs = [] + + for i in range(3): + dirname = os.path.basename(root) + if dirname.startswith(parentdir_prefix): + return {"version": dirname[len(parentdir_prefix):], + "full-revisionid": None, + "dirty": False, "error": None, "date": None} + else: + rootdirs.append(root) + root = os.path.dirname(root) # up a level + + if verbose: + print("Tried directories %s but none started with prefix %s" % + (str(rootdirs), parentdir_prefix)) + raise NotThisMethod("rootdir doesn't start with parentdir_prefix") + + +@register_vcs_handler("git", "get_keywords") +def git_get_keywords(versionfile_abs): + """Extract version information from the given file.""" + # the code embedded in _version.py can just fetch the value of these + # keywords. When used from setup.py, we don't want to import _version.py, + # so we do it with a regexp instead. This function is not used from + # _version.py. + keywords = {} + try: + f = open(versionfile_abs, "r") + for line in f.readlines(): + if line.strip().startswith("git_refnames ="): + mo = re.search(r'=\s*"(.*)"', line) + if mo: + keywords["refnames"] = mo.group(1) + if line.strip().startswith("git_full ="): + mo = re.search(r'=\s*"(.*)"', line) + if mo: + keywords["full"] = mo.group(1) + if line.strip().startswith("git_date ="): + mo = re.search(r'=\s*"(.*)"', line) + if mo: + keywords["date"] = mo.group(1) + f.close() + except EnvironmentError: + pass + return keywords + + +@register_vcs_handler("git", "keywords") +def git_versions_from_keywords(keywords, tag_prefix, verbose): + """Get version information from git keywords.""" + if not keywords: + raise NotThisMethod("no keywords at all, weird") + date = keywords.get("date") + if date is not None: + # git-2.2.0 added "%cI", which expands to an ISO-8601 -compliant + # datestamp. However we prefer "%ci" (which expands to an "ISO-8601 + # -like" string, which we must then edit to make compliant), because + # it's been around since git-1.5.3, and it's too difficult to + # discover which version we're using, or to work around using an + # older one. + date = date.strip().replace(" ", "T", 1).replace(" ", "", 1) + refnames = keywords["refnames"].strip() + if refnames.startswith("$Format"): + if verbose: + print("keywords are unexpanded, not using") + raise NotThisMethod("unexpanded keywords, not a git-archive tarball") + refs = set([r.strip() for r in refnames.strip("()").split(",")]) + # starting in git-1.8.3, tags are listed as "tag: foo-1.0" instead of + # just "foo-1.0". If we see a "tag: " prefix, prefer those. + TAG = "tag: " + tags = set([r[len(TAG):] for r in refs if r.startswith(TAG)]) + if not tags: + # Either we're using git < 1.8.3, or there really are no tags. We use + # a heuristic: assume all version tags have a digit. The old git %d + # expansion behaves like git log --decorate=short and strips out the + # refs/heads/ and refs/tags/ prefixes that would let us distinguish + # between branches and tags. By ignoring refnames without digits, we + # filter out many common branch names like "release" and + # "stabilization", as well as "HEAD" and "master". + tags = set([r for r in refs if re.search(r'\d', r)]) + if verbose: + print("discarding '%s', no digits" % ",".join(refs - tags)) + if verbose: + print("likely tags: %s" % ",".join(sorted(tags))) + for ref in sorted(tags): + # sorting will prefer e.g. "2.0" over "2.0rc1" + if ref.startswith(tag_prefix): + r = ref[len(tag_prefix):] + if verbose: + print("picking %s" % r) + return {"version": r, + "full-revisionid": keywords["full"].strip(), + "dirty": False, "error": None, + "date": date} + # no suitable tags, so version is "0+unknown", but full hex is still there + if verbose: + print("no suitable tags, using unknown + full revision id") + return {"version": "0+unknown", + "full-revisionid": keywords["full"].strip(), + "dirty": False, "error": "no suitable tags", "date": None} + + +@register_vcs_handler("git", "pieces_from_vcs") +def git_pieces_from_vcs(tag_prefix, root, verbose, run_command=run_command): + """Get version from 'git describe' in the root of the source tree. + + This only gets called if the git-archive 'subst' keywords were *not* + expanded, and _version.py hasn't already been rewritten with a short + version string, meaning we're inside a checked out source tree. + """ + GITS = ["git"] + if sys.platform == "win32": + GITS = ["git.cmd", "git.exe"] + + out, rc = run_command(GITS, ["rev-parse", "--git-dir"], cwd=root, + hide_stderr=True) + if rc != 0: + if verbose: + print("Directory %s not under git control" % root) + raise NotThisMethod("'git rev-parse --git-dir' returned error") + + # if there is a tag matching tag_prefix, this yields TAG-NUM-gHEX[-dirty] + # if there isn't one, this yields HEX[-dirty] (no NUM) + describe_out, rc = run_command(GITS, ["describe", "--tags", "--dirty", + "--always", "--long", + "--match", "%s*" % tag_prefix], + cwd=root) + # --long was added in git-1.5.5 + if describe_out is None: + raise NotThisMethod("'git describe' failed") + describe_out = describe_out.strip() + full_out, rc = run_command(GITS, ["rev-parse", "HEAD"], cwd=root) + if full_out is None: + raise NotThisMethod("'git rev-parse' failed") + full_out = full_out.strip() + + pieces = {} + pieces["long"] = full_out + pieces["short"] = full_out[:7] # maybe improved later + pieces["error"] = None + + # parse describe_out. It will be like TAG-NUM-gHEX[-dirty] or HEX[-dirty] + # TAG might have hyphens. + git_describe = describe_out + + # look for -dirty suffix + dirty = git_describe.endswith("-dirty") + pieces["dirty"] = dirty + if dirty: + git_describe = git_describe[:git_describe.rindex("-dirty")] + + # now we have TAG-NUM-gHEX or HEX + + if "-" in git_describe: + # TAG-NUM-gHEX + mo = re.search(r'^(.+)-(\d+)-g([0-9a-f]+)$', git_describe) + if not mo: + # unparseable. Maybe git-describe is misbehaving? + pieces["error"] = ("unable to parse git-describe output: '%s'" + % describe_out) + return pieces + + # tag + full_tag = mo.group(1) + if not full_tag.startswith(tag_prefix): + if verbose: + fmt = "tag '%s' doesn't start with prefix '%s'" + print(fmt % (full_tag, tag_prefix)) + pieces["error"] = ("tag '%s' doesn't start with prefix '%s'" + % (full_tag, tag_prefix)) + return pieces + pieces["closest-tag"] = full_tag[len(tag_prefix):] + + # distance: number of commits since tag + pieces["distance"] = int(mo.group(2)) + + # commit: short hex revision ID + pieces["short"] = mo.group(3) + + else: + # HEX: no tags + pieces["closest-tag"] = None + count_out, rc = run_command(GITS, ["rev-list", "HEAD", "--count"], + cwd=root) + pieces["distance"] = int(count_out) # total number of commits + + # commit date: see ISO-8601 comment in git_versions_from_keywords() + date = run_command(GITS, ["show", "-s", "--format=%ci", "HEAD"], + cwd=root)[0].strip() + pieces["date"] = date.strip().replace(" ", "T", 1).replace(" ", "", 1) + + return pieces + + +def plus_or_dot(pieces): + """Return a + if we don't already have one, else return a .""" + if "+" in pieces.get("closest-tag", ""): + return "." + return "+" + + +def render_pep440(pieces): + """Build up version string, with post-release "local version identifier". + + Our goal: TAG[+DISTANCE.gHEX[.dirty]] . Note that if you + get a tagged build and then dirty it, you'll get TAG+0.gHEX.dirty + + Exceptions: + 1: no tags. git_describe was just HEX. 0+untagged.DISTANCE.gHEX[.dirty] + """ + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"] or pieces["dirty"]: + rendered += plus_or_dot(pieces) + rendered += "%d.g%s" % (pieces["distance"], pieces["short"]) + if pieces["dirty"]: + rendered += ".dirty" + else: + # exception #1 + rendered = "0+untagged.%d.g%s" % (pieces["distance"], + pieces["short"]) + if pieces["dirty"]: + rendered += ".dirty" + return rendered + + +def render_pep440_pre(pieces): + """TAG[.post.devDISTANCE] -- No -dirty. + + Exceptions: + 1: no tags. 0.post.devDISTANCE + """ + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"]: + rendered += ".post.dev%d" % pieces["distance"] + else: + # exception #1 + rendered = "0.post.dev%d" % pieces["distance"] + return rendered + + +def render_pep440_post(pieces): + """TAG[.postDISTANCE[.dev0]+gHEX] . + + The ".dev0" means dirty. Note that .dev0 sorts backwards + (a dirty tree will appear "older" than the corresponding clean one), + but you shouldn't be releasing software with -dirty anyways. + + Exceptions: + 1: no tags. 0.postDISTANCE[.dev0] + """ + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"] or pieces["dirty"]: + rendered += ".post%d" % pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + rendered += plus_or_dot(pieces) + rendered += "g%s" % pieces["short"] + else: + # exception #1 + rendered = "0.post%d" % pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + rendered += "+g%s" % pieces["short"] + return rendered + + +def render_pep440_old(pieces): + """TAG[.postDISTANCE[.dev0]] . + + The ".dev0" means dirty. + + Eexceptions: + 1: no tags. 0.postDISTANCE[.dev0] + """ + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"] or pieces["dirty"]: + rendered += ".post%d" % pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + else: + # exception #1 + rendered = "0.post%d" % pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + return rendered + + +def render_git_describe(pieces): + """TAG[-DISTANCE-gHEX][-dirty]. + + Like 'git describe --tags --dirty --always'. + + Exceptions: + 1: no tags. HEX[-dirty] (note: no 'g' prefix) + """ + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"]: + rendered += "-%d-g%s" % (pieces["distance"], pieces["short"]) + else: + # exception #1 + rendered = pieces["short"] + if pieces["dirty"]: + rendered += "-dirty" + return rendered + + +def render_git_describe_long(pieces): + """TAG-DISTANCE-gHEX[-dirty]. + + Like 'git describe --tags --dirty --always -long'. + The distance/hash is unconditional. + + Exceptions: + 1: no tags. HEX[-dirty] (note: no 'g' prefix) + """ + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + rendered += "-%d-g%s" % (pieces["distance"], pieces["short"]) + else: + # exception #1 + rendered = pieces["short"] + if pieces["dirty"]: + rendered += "-dirty" + return rendered + + +def render(pieces, style): + """Render the given version pieces into the requested style.""" + if pieces["error"]: + return {"version": "unknown", + "full-revisionid": pieces.get("long"), + "dirty": None, + "error": pieces["error"], + "date": None} + + if not style or style == "default": + style = "pep440" # the default + + if style == "pep440": + rendered = render_pep440(pieces) + elif style == "pep440-pre": + rendered = render_pep440_pre(pieces) + elif style == "pep440-post": + rendered = render_pep440_post(pieces) + elif style == "pep440-old": + rendered = render_pep440_old(pieces) + elif style == "git-describe": + rendered = render_git_describe(pieces) + elif style == "git-describe-long": + rendered = render_git_describe_long(pieces) + else: + raise ValueError("unknown style '%s'" % style) + + return {"version": rendered, "full-revisionid": pieces["long"], + "dirty": pieces["dirty"], "error": None, + "date": pieces.get("date")} + + +def get_versions(): + """Get version information or return default if unable to do so.""" + # I am in _version.py, which lives at ROOT/VERSIONFILE_SOURCE. If we have + # __file__, we can work backwards from there to the root. Some + # py2exe/bbfreeze/non-CPython implementations don't do __file__, in which + # case we can only use expanded keywords. + + cfg = get_config() + verbose = cfg.verbose + + try: + return git_versions_from_keywords(get_keywords(), cfg.tag_prefix, + verbose) + except NotThisMethod: + pass + + try: + root = os.path.realpath(__file__) + # versionfile_source is the relative path from the top of the source + # tree (where the .git directory might live) to this file. Invert + # this to find the root from __file__. + for i in cfg.versionfile_source.split('/'): + root = os.path.dirname(root) + except NameError: + return {"version": "0+unknown", "full-revisionid": None, + "dirty": None, + "error": "unable to find root of source tree", + "date": None} + + try: + pieces = git_pieces_from_vcs(cfg.tag_prefix, root, verbose) + return render(pieces, cfg.style) + except NotThisMethod: + pass + + try: + if cfg.parentdir_prefix: + return versions_from_parentdir(cfg.parentdir_prefix, root, verbose) + except NotThisMethod: + pass + + return {"version": "0+unknown", "full-revisionid": None, + "dirty": None, + "error": "unable to compute version", "date": None} diff --git a/nmigen_boards/ext/__init__.py b/nmigen_boards/ext/__init__.py new file mode 100644 index 0000000..e69de29 diff --git a/nmigen_boards/ext/pmod.py b/nmigen_boards/ext/pmod.py new file mode 100644 index 0000000..331352c --- /dev/null +++ b/nmigen_boards/ext/pmod.py @@ -0,0 +1,94 @@ +# Reference: https://www.digilentinc.com/Pmods/Digilent-Pmod_%20Interface_Specification.pdf + +from nmigen.build import * + + +__all__ = [ + "PmodGPIOType1Resource", + "PmodSPIType2Resource", + "PmodSPIType2AResource", + "PmodUARTType3Resource", + "PmodUARTType4Resource", + "PmodUARTType4AResource", + "PmodHBridgeType5Resource", + "PmodDualHBridgeType6Resource", +] + + +def PmodGPIOType1Resource(name, number, *, pmod, extras=None): + return Resource(name, number, + Pins("1 2 3 4", dir="io", conn=("pmod", pmod)), + extras=extras + ) + + +def PmodSPIType2Resource(name, number, *, pmod, extras=None): + return Resource(name, number, + Subsignal("cs_n", Pins("1", dir="o", conn=("pmod", pmod))), + Subsignal("clk", Pins("2", dir="o", conn=("pmod", pmod))), + Subsignal("mosi", Pins("3", dir="o", conn=("pmod", pmod))), + Subsignal("miso", Pins("4", dir="i", conn=("pmod", pmod))), + extras=extras + ) + + +def PmodSPIType2AResource(name, number, *, pmod, extras=None): + return Resource(name, number, + Subsignal("cs_n", Pins("1", dir="o", conn=("pmod", pmod))), + Subsignal("clk", Pins("2", dir="o", conn=("pmod", pmod))), + Subsignal("mosi", Pins("3", dir="o", conn=("pmod", pmod))), + Subsignal("miso", Pins("4", dir="i", conn=("pmod", pmod))), + Subsignal("int", Pins("7", dir="i", conn=("pmod", pmod))), + Subsignal("reset", Pins("8", dir="o", conn=("pmod", pmod))), + extras=extras + ) + + +def PmodUARTType3Resource(name, number, *, pmod, extras=None): + return Resource(name, number, + Subsignal("cts", Pins("1", dir="o", conn=("pmod", pmod))), + Subsignal("rts", Pins("2", dir="i", conn=("pmod", pmod))), + Subsignal("rx", Pins("3", dir="i", conn=("pmod", pmod))), + Subsignal("tx", Pins("4", dir="o", conn=("pmod", pmod))), + extras=extras + ) + + +def PmodUARTType4Resource(name, number, *, pmod, extras=None): + return Resource(name, number, + Subsignal("cts", Pins("1", dir="i", conn=("pmod", pmod))), + Subsignal("tx", Pins("2", dir="o", conn=("pmod", pmod))), + Subsignal("rx", Pins("3", dir="i", conn=("pmod", pmod))), + Subsignal("rts", Pins("4", dir="o", conn=("pmod", pmod))), + extras=extras + ) + + +def PmodUARTType4AResource(name, number, *, pmod, extras=None): + return Resource(name, number, + Subsignal("cts", Pins("1", dir="i", conn=("pmod", pmod))), + Subsignal("tx", Pins("2", dir="o", conn=("pmod", pmod))), + Subsignal("rx", Pins("3", dir="i", conn=("pmod", pmod))), + Subsignal("rts", Pins("4", dir="o", conn=("pmod", pmod))), + Subsignal("int", Pins("7", dir="i", conn=("pmod", pmod))), + Subsignal("reset", Pins("8", dir="o", conn=("pmod", pmod))), + extras=extras + ) + + +def PmodHBridgeType5Resource(name, number, *, pmod, extras=None): + return Resource(name, number, + Subsignal("dir", Pins("1", dir="o", conn=("pmod", pmod))), + Subsignal("en", Pins("2", dir="o", conn=("pmod", pmod))), + Subsignal("sa", Pins("3", dir="i", conn=("pmod", pmod))), + Subsignal("sb", Pins("4", dir="i", conn=("pmod", pmod))), + extras=extras + ) + + +def PmodDualHBridgeType6Resource(name, number, *, pmod, extras=None): + return Resource(name, number, + Subsignal("dir", Pins("1 3", dir="o", conn=("pmod", pmod))), + Subsignal("en", Pins("2 4", dir="o", conn=("pmod", pmod))), + extras=extras + ) diff --git a/nmigen_boards/ice40_hx1k_blink_evn.py b/nmigen_boards/ice40_hx1k_blink_evn.py new file mode 100644 index 0000000..fc80d64 --- /dev/null +++ b/nmigen_boards/ice40_hx1k_blink_evn.py @@ -0,0 +1,42 @@ +import os +import subprocess + +from nmigen.build import * +from nmigen.vendor.lattice_ice40 import * + + +__all__ = ["ICE40HX1KBlinkEVNPlatform"] + + +class ICE40HX1KBlinkEVNPlatform(LatticeICE40Platform): + device = "hx1k" + package = "vq100" + clocks = [ + ("clk3p3", 3.3e6), + ] + resources = [ + Resource("clk3p3", 0, Pins("13", dir="i"), + extras={"GLOBAL": "1", "IO_STANDARD": "SB_LVCMOS33"}), + + Resource("user_led", 0, Pins("59", dir="o"), extras={"IO_STANDARD": "SB_LVCMOS33"}), + Resource("user_led", 1, Pins("56", dir="o"), extras={"IO_STANDARD": "SB_LVCMOS33"}), + Resource("user_led", 2, Pins("53", dir="o"), extras={"IO_STANDARD": "SB_LVCMOS33"}), + Resource("user_led", 3, Pins("51", dir="o"), extras={"IO_STANDARD": "SB_LVCMOS33"}), + + Resource("user_btn", 0, Pins("60"), extras={"IO_STANDARD": "SB_LVCMOS33"}), + Resource("user_btn", 1, Pins("57"), extras={"IO_STANDARD": "SB_LVCMOS33"}), + Resource("user_btn", 2, Pins("54"), extras={"IO_STANDARD": "SB_LVCMOS33"}), + Resource("user_btn", 3, Pins("52"), extras={"IO_STANDARD": "SB_LVCMOS33"}), + ] + connectors = [ + Connector("pmod", 1, "10 9 8 7 - - 4 3 2 1 - -"), # J1 + Connector("pmod", 5, "40 42 62 64 - - 37 41 63 45 - -"), # J5 + Connector("pmod", 6, "25 24 21 20 - - 26 27 28 33 - -"), # J6 + Connector("pmod", 11, "49 45 46 48 - -"), # J11 + Connector("pmod", 12, "59 56 53 51 - -"), # J12 + ] + + def toolchain_program(self, products, name): + iceburn = os.environ.get("ICEBURN", "iCEburn") + with products.extract("{}.bin".format(name)) as bitstream_filename: + subprocess.run([iceburn, "-evw", bitstream_filename], check=True) diff --git a/nmigen_boards/icestick.py b/nmigen_boards/icestick.py new file mode 100644 index 0000000..1fe7954 --- /dev/null +++ b/nmigen_boards/icestick.py @@ -0,0 +1,63 @@ +import os +import subprocess + +from nmigen.build import * +from nmigen.vendor.lattice_ice40 import * + + +__all__ = ["ICEStickPlatform"] + + +class ICEStickPlatform(LatticeICE40Platform): + device = "hx1k" + package = "tq144" + clocks = [ + ("clk12", 12e6), + ] + resources = [ + Resource("clk12", 0, Pins("21", dir="i"), + extras={"GLOBAL": "1", "IO_STANDARD": "SB_LVCMOS33"}), + + Resource("user_led", 0, Pins("99", dir="o"), extras={"IO_STANDARD": "SB_LVCMOS33"}), + Resource("user_led", 1, Pins("98", dir="o"), extras={"IO_STANDARD": "SB_LVCMOS33"}), + Resource("user_led", 2, Pins("97", dir="o"), extras={"IO_STANDARD": "SB_LVCMOS33"}), + Resource("user_led", 3, Pins("96", dir="o"), extras={"IO_STANDARD": "SB_LVCMOS33"}), + Resource("user_led", 4, Pins("95", dir="o"), extras={"IO_STANDARD": "SB_LVCMOS33"}), + + Resource("serial", 0, + Subsignal("rx", Pins("9", dir="i")), + Subsignal("tx", Pins("8", dir="o")), + Subsignal("rts", Pins("7", dir="o")), + Subsignal("cts", Pins("4", dir="i")), + Subsignal("dtr", Pins("3", dir="o")), + Subsignal("dsr", Pins("2", dir="i")), + Subsignal("dcd", Pins("1", dir="i")), + extras={"IO_STANDARD": "SB_LVTTL", "PULLUP": "1"} + ), + + Resource("irda", 0, + Subsignal("rx", Pins("106", dir="i")), + Subsignal("tx", Pins("105", dir="o")), + Subsignal("sd", Pins("107", dir="o")), + extras={"IO_STANDARD": "SB_LVCMOS33"} + ), + + Resource("spiflash", 0, + Subsignal("cs_n", Pins("71", dir="o")), + Subsignal("clk", Pins("70", dir="o")), + Subsignal("mosi", Pins("67", dir="o")), + Subsignal("miso", Pins("68", dir="i")), + extras={"IO_STANDARD": "SB_LVCMOS33"} + ), + ] + connectors = [ + Connector("pmod", 0, "78 79 80 81 - - 87 88 90 91 - -"), # J2 + + Connector("j", 1, "- - 112 113 114 115 116 117 118 119"), # J1 + Connector("j", 3, "- - 62 61 60 56 48 47 45 44"), # J3 + ] + + def toolchain_program(self, products, name): + iceprog = os.environ.get("ICEPROG", "iceprog") + with products.extract("{}.bin".format(name)) as bitstream_filename: + subprocess.run([iceprog, bitstream_filename], check=True) diff --git a/nmigen_boards/tinyfpga_bx.py b/nmigen_boards/tinyfpga_bx.py new file mode 100644 index 0000000..087f6d9 --- /dev/null +++ b/nmigen_boards/tinyfpga_bx.py @@ -0,0 +1,63 @@ +import os +import subprocess + +from nmigen.build import * +from nmigen.vendor.lattice_ice40 import * + + +__all__ = ["TinyFPGABXPlatform"] + + +class TinyFPGABXPlatform(LatticeICE40Platform): + device = "lp8k" + package = "cm81" + clocks = [ + ("clk16", 16e6), + ] + resources = [ + Resource("clk16", 0, Pins("B2", dir="i"), + extras={"IO_STANDARD": "SB_LVCMOS33"}), + + Resource("user_led", 0, Pins("B3", dir="o"), extras={"IO_STANDARD": "SB_LVCMOS33"}), + + Resource("usb", 0, + Subsignal("d_p", Pins("B4", dir="io")), + Subsignal("d_n", Pins("A4", dir="io")), + Subsignal("pullup", Pins("A3", dir="o")), + extras={"IO_STANDARD": "SB_LVCMOS33"} + ), + + Resource("spiflash", 0, + Subsignal("cs_n", Pins("F7", dir="o")), + Subsignal("clk", Pins("G7", dir="o")), + Subsignal("mosi", Pins("G6", dir="o")), + Subsignal("miso", Pins("H7", dir="i")), + Subsignal("wp", Pins("H4", dir="o")), + Subsignal("hold", Pins("J8", dir="o")), + extras={"IO_STANDARD": "SB_LVCMOS33"} + ), + + Resource("spiflash4x", 0, + Subsignal("cs_n", Pins("F7", dir="o")), + Subsignal("clk", Pins("G7", dir="o")), + Subsignal("dq", Pins("G6 H7 H4 J8", dir="io")), + extras={"IO_STANDARD": "SB_LVCMOS33"} + ), + ] + connectors = [ + Connector("gpio", 0, + # Left side of the board + # 1 2 3 4 5 6 7 8 9 10 11 12 13 + " A2 A1 B1 C2 C1 D2 D1 E2 E1 G2 H1 J1 H2" + # Right side of the board + # 14 15 16 17 18 19 20 21 22 23 24 + " H9 D9 D8 B8 A9 B8 A8 B7 A7 B6 A6" + # Bottom of the board + # 25 26 27 28 29 30 31 + "G1 J3 J4 G9 J9 E8 J2"), + ] + + def toolchain_program(self, products, name): + tinyprog = os.environ.get("TINYPROG", "tinyprog") + with products.extract("{}.bin".format(name)) as bitstream_filename: + subprocess.run([tinyprog, "-p", bitstream_filename], check=True) diff --git a/setup.cfg b/setup.cfg new file mode 100644 index 0000000..fdc627b --- /dev/null +++ b/setup.cfg @@ -0,0 +1,7 @@ +[versioneer] +VCS = git +style = git-describe-long +versionfile_source = nmigen_boards/_version.py +versionfile_build = nmigen_boards/_version.py +tag_prefix = v +parentdir_prefix = nmigen_boards- diff --git a/setup.py b/setup.py new file mode 100644 index 0000000..c6dd417 --- /dev/null +++ b/setup.py @@ -0,0 +1,21 @@ +import sys +from setuptools import setup, find_packages +import versioneer + + +setup( + name="nmigen-boards", + version=versioneer.get_version(), + author="whitequark", + author_email="whitequark@whitequark.org", + description="Board and connector definitions for nMigen", + #long_description="""TODO""", + license="BSD", + install_requires=["nmigen"], + packages=find_packages(), + project_urls={ + "Source Code": "https://github.com/m-labs/nmigen-boards", + "Bug Tracker": "https://github.com/m-labs/nmigen-boards/issues", + }, + cmdclass=versioneer.get_cmdclass() +) diff --git a/versioneer.py b/versioneer.py new file mode 100644 index 0000000..64fea1c --- /dev/null +++ b/versioneer.py @@ -0,0 +1,1822 @@ + +# Version: 0.18 + +"""The Versioneer - like a rocketeer, but for versions. + +The Versioneer +============== + +* like a rocketeer, but for versions! +* https://github.com/warner/python-versioneer +* Brian Warner +* License: Public Domain +* Compatible With: python2.6, 2.7, 3.2, 3.3, 3.4, 3.5, 3.6, and pypy +* [![Latest Version] +(https://pypip.in/version/versioneer/badge.svg?style=flat) +](https://pypi.python.org/pypi/versioneer/) +* [![Build Status] +(https://travis-ci.org/warner/python-versioneer.png?branch=master) +](https://travis-ci.org/warner/python-versioneer) + +This is a tool for managing a recorded version number in distutils-based +python projects. The goal is to remove the tedious and error-prone "update +the embedded version string" step from your release process. Making a new +release should be as easy as recording a new tag in your version-control +system, and maybe making new tarballs. + + +## Quick Install + +* `pip install versioneer` to somewhere to your $PATH +* add a `[versioneer]` section to your setup.cfg (see below) +* run `versioneer install` in your source tree, commit the results + +## Version Identifiers + +Source trees come from a variety of places: + +* a version-control system checkout (mostly used by developers) +* a nightly tarball, produced by build automation +* a snapshot tarball, produced by a web-based VCS browser, like github's + "tarball from tag" feature +* a release tarball, produced by "setup.py sdist", distributed through PyPI + +Within each source tree, the version identifier (either a string or a number, +this tool is format-agnostic) can come from a variety of places: + +* ask the VCS tool itself, e.g. "git describe" (for checkouts), which knows + about recent "tags" and an absolute revision-id +* the name of the directory into which the tarball was unpacked +* an expanded VCS keyword ($Id$, etc) +* a `_version.py` created by some earlier build step + +For released software, the version identifier is closely related to a VCS +tag. Some projects use tag names that include more than just the version +string (e.g. "myproject-1.2" instead of just "1.2"), in which case the tool +needs to strip the tag prefix to extract the version identifier. For +unreleased software (between tags), the version identifier should provide +enough information to help developers recreate the same tree, while also +giving them an idea of roughly how old the tree is (after version 1.2, before +version 1.3). Many VCS systems can report a description that captures this, +for example `git describe --tags --dirty --always` reports things like +"0.7-1-g574ab98-dirty" to indicate that the checkout is one revision past the +0.7 tag, has a unique revision id of "574ab98", and is "dirty" (it has +uncommitted changes. + +The version identifier is used for multiple purposes: + +* to allow the module to self-identify its version: `myproject.__version__` +* to choose a name and prefix for a 'setup.py sdist' tarball + +## Theory of Operation + +Versioneer works by adding a special `_version.py` file into your source +tree, where your `__init__.py` can import it. This `_version.py` knows how to +dynamically ask the VCS tool for version information at import time. + +`_version.py` also contains `$Revision$` markers, and the installation +process marks `_version.py` to have this marker rewritten with a tag name +during the `git archive` command. As a result, generated tarballs will +contain enough information to get the proper version. + +To allow `setup.py` to compute a version too, a `versioneer.py` is added to +the top level of your source tree, next to `setup.py` and the `setup.cfg` +that configures it. This overrides several distutils/setuptools commands to +compute the version when invoked, and changes `setup.py build` and `setup.py +sdist` to replace `_version.py` with a small static file that contains just +the generated version data. + +## Installation + +See [INSTALL.md](./INSTALL.md) for detailed installation instructions. + +## Version-String Flavors + +Code which uses Versioneer can learn about its version string at runtime by +importing `_version` from your main `__init__.py` file and running the +`get_versions()` function. From the "outside" (e.g. in `setup.py`), you can +import the top-level `versioneer.py` and run `get_versions()`. + +Both functions return a dictionary with different flavors of version +information: + +* `['version']`: A condensed version string, rendered using the selected + style. This is the most commonly used value for the project's version + string. The default "pep440" style yields strings like `0.11`, + `0.11+2.g1076c97`, or `0.11+2.g1076c97.dirty`. See the "Styles" section + below for alternative styles. + +* `['full-revisionid']`: detailed revision identifier. For Git, this is the + full SHA1 commit id, e.g. "1076c978a8d3cfc70f408fe5974aa6c092c949ac". + +* `['date']`: Date and time of the latest `HEAD` commit. For Git, it is the + commit date in ISO 8601 format. This will be None if the date is not + available. + +* `['dirty']`: a boolean, True if the tree has uncommitted changes. Note that + this is only accurate if run in a VCS checkout, otherwise it is likely to + be False or None + +* `['error']`: if the version string could not be computed, this will be set + to a string describing the problem, otherwise it will be None. It may be + useful to throw an exception in setup.py if this is set, to avoid e.g. + creating tarballs with a version string of "unknown". + +Some variants are more useful than others. Including `full-revisionid` in a +bug report should allow developers to reconstruct the exact code being tested +(or indicate the presence of local changes that should be shared with the +developers). `version` is suitable for display in an "about" box or a CLI +`--version` output: it can be easily compared against release notes and lists +of bugs fixed in various releases. + +The installer adds the following text to your `__init__.py` to place a basic +version in `YOURPROJECT.__version__`: + + from ._version import get_versions + __version__ = get_versions()['version'] + del get_versions + +## Styles + +The setup.cfg `style=` configuration controls how the VCS information is +rendered into a version string. + +The default style, "pep440", produces a PEP440-compliant string, equal to the +un-prefixed tag name for actual releases, and containing an additional "local +version" section with more detail for in-between builds. For Git, this is +TAG[+DISTANCE.gHEX[.dirty]] , using information from `git describe --tags +--dirty --always`. For example "0.11+2.g1076c97.dirty" indicates that the +tree is like the "1076c97" commit but has uncommitted changes (".dirty"), and +that this commit is two revisions ("+2") beyond the "0.11" tag. For released +software (exactly equal to a known tag), the identifier will only contain the +stripped tag, e.g. "0.11". + +Other styles are available. See [details.md](details.md) in the Versioneer +source tree for descriptions. + +## Debugging + +Versioneer tries to avoid fatal errors: if something goes wrong, it will tend +to return a version of "0+unknown". To investigate the problem, run `setup.py +version`, which will run the version-lookup code in a verbose mode, and will +display the full contents of `get_versions()` (including the `error` string, +which may help identify what went wrong). + +## Known Limitations + +Some situations are known to cause problems for Versioneer. This details the +most significant ones. More can be found on Github +[issues page](https://github.com/warner/python-versioneer/issues). + +### Subprojects + +Versioneer has limited support for source trees in which `setup.py` is not in +the root directory (e.g. `setup.py` and `.git/` are *not* siblings). The are +two common reasons why `setup.py` might not be in the root: + +* Source trees which contain multiple subprojects, such as + [Buildbot](https://github.com/buildbot/buildbot), which contains both + "master" and "slave" subprojects, each with their own `setup.py`, + `setup.cfg`, and `tox.ini`. Projects like these produce multiple PyPI + distributions (and upload multiple independently-installable tarballs). +* Source trees whose main purpose is to contain a C library, but which also + provide bindings to Python (and perhaps other langauges) in subdirectories. + +Versioneer will look for `.git` in parent directories, and most operations +should get the right version string. However `pip` and `setuptools` have bugs +and implementation details which frequently cause `pip install .` from a +subproject directory to fail to find a correct version string (so it usually +defaults to `0+unknown`). + +`pip install --editable .` should work correctly. `setup.py install` might +work too. + +Pip-8.1.1 is known to have this problem, but hopefully it will get fixed in +some later version. + +[Bug #38](https://github.com/warner/python-versioneer/issues/38) is tracking +this issue. The discussion in +[PR #61](https://github.com/warner/python-versioneer/pull/61) describes the +issue from the Versioneer side in more detail. +[pip PR#3176](https://github.com/pypa/pip/pull/3176) and +[pip PR#3615](https://github.com/pypa/pip/pull/3615) contain work to improve +pip to let Versioneer work correctly. + +Versioneer-0.16 and earlier only looked for a `.git` directory next to the +`setup.cfg`, so subprojects were completely unsupported with those releases. + +### Editable installs with setuptools <= 18.5 + +`setup.py develop` and `pip install --editable .` allow you to install a +project into a virtualenv once, then continue editing the source code (and +test) without re-installing after every change. + +"Entry-point scripts" (`setup(entry_points={"console_scripts": ..})`) are a +convenient way to specify executable scripts that should be installed along +with the python package. + +These both work as expected when using modern setuptools. When using +setuptools-18.5 or earlier, however, certain operations will cause +`pkg_resources.DistributionNotFound` errors when running the entrypoint +script, which must be resolved by re-installing the package. This happens +when the install happens with one version, then the egg_info data is +regenerated while a different version is checked out. Many setup.py commands +cause egg_info to be rebuilt (including `sdist`, `wheel`, and installing into +a different virtualenv), so this can be surprising. + +[Bug #83](https://github.com/warner/python-versioneer/issues/83) describes +this one, but upgrading to a newer version of setuptools should probably +resolve it. + +### Unicode version strings + +While Versioneer works (and is continually tested) with both Python 2 and +Python 3, it is not entirely consistent with bytes-vs-unicode distinctions. +Newer releases probably generate unicode version strings on py2. It's not +clear that this is wrong, but it may be surprising for applications when then +write these strings to a network connection or include them in bytes-oriented +APIs like cryptographic checksums. + +[Bug #71](https://github.com/warner/python-versioneer/issues/71) investigates +this question. + + +## Updating Versioneer + +To upgrade your project to a new release of Versioneer, do the following: + +* install the new Versioneer (`pip install -U versioneer` or equivalent) +* edit `setup.cfg`, if necessary, to include any new configuration settings + indicated by the release notes. See [UPGRADING](./UPGRADING.md) for details. +* re-run `versioneer install` in your source tree, to replace + `SRC/_version.py` +* commit any changed files + +## Future Directions + +This tool is designed to make it easily extended to other version-control +systems: all VCS-specific components are in separate directories like +src/git/ . The top-level `versioneer.py` script is assembled from these +components by running make-versioneer.py . In the future, make-versioneer.py +will take a VCS name as an argument, and will construct a version of +`versioneer.py` that is specific to the given VCS. It might also take the +configuration arguments that are currently provided manually during +installation by editing setup.py . Alternatively, it might go the other +direction and include code from all supported VCS systems, reducing the +number of intermediate scripts. + + +## License + +To make Versioneer easier to embed, all its code is dedicated to the public +domain. The `_version.py` that it creates is also in the public domain. +Specifically, both are released under the Creative Commons "Public Domain +Dedication" license (CC0-1.0), as described in +https://creativecommons.org/publicdomain/zero/1.0/ . + +""" + +from __future__ import print_function +try: + import configparser +except ImportError: + import ConfigParser as configparser +import errno +import json +import os +import re +import subprocess +import sys + + +class VersioneerConfig: + """Container for Versioneer configuration parameters.""" + + +def get_root(): + """Get the project root directory. + + We require that all commands are run from the project root, i.e. the + directory that contains setup.py, setup.cfg, and versioneer.py . + """ + root = os.path.realpath(os.path.abspath(os.getcwd())) + setup_py = os.path.join(root, "setup.py") + versioneer_py = os.path.join(root, "versioneer.py") + if not (os.path.exists(setup_py) or os.path.exists(versioneer_py)): + # allow 'python path/to/setup.py COMMAND' + root = os.path.dirname(os.path.realpath(os.path.abspath(sys.argv[0]))) + setup_py = os.path.join(root, "setup.py") + versioneer_py = os.path.join(root, "versioneer.py") + if not (os.path.exists(setup_py) or os.path.exists(versioneer_py)): + err = ("Versioneer was unable to run the project root directory. " + "Versioneer requires setup.py to be executed from " + "its immediate directory (like 'python setup.py COMMAND'), " + "or in a way that lets it use sys.argv[0] to find the root " + "(like 'python path/to/setup.py COMMAND').") + raise VersioneerBadRootError(err) + try: + # Certain runtime workflows (setup.py install/develop in a setuptools + # tree) execute all dependencies in a single python process, so + # "versioneer" may be imported multiple times, and python's shared + # module-import table will cache the first one. So we can't use + # os.path.dirname(__file__), as that will find whichever + # versioneer.py was first imported, even in later projects. + me = os.path.realpath(os.path.abspath(__file__)) + me_dir = os.path.normcase(os.path.splitext(me)[0]) + vsr_dir = os.path.normcase(os.path.splitext(versioneer_py)[0]) + if me_dir != vsr_dir: + print("Warning: build in %s is using versioneer.py from %s" + % (os.path.dirname(me), versioneer_py)) + except NameError: + pass + return root + + +def get_config_from_root(root): + """Read the project setup.cfg file to determine Versioneer config.""" + # This might raise EnvironmentError (if setup.cfg is missing), or + # configparser.NoSectionError (if it lacks a [versioneer] section), or + # configparser.NoOptionError (if it lacks "VCS="). See the docstring at + # the top of versioneer.py for instructions on writing your setup.cfg . + setup_cfg = os.path.join(root, "setup.cfg") + parser = configparser.SafeConfigParser() + with open(setup_cfg, "r") as f: + parser.readfp(f) + VCS = parser.get("versioneer", "VCS") # mandatory + + def get(parser, name): + if parser.has_option("versioneer", name): + return parser.get("versioneer", name) + return None + cfg = VersioneerConfig() + cfg.VCS = VCS + cfg.style = get(parser, "style") or "" + cfg.versionfile_source = get(parser, "versionfile_source") + cfg.versionfile_build = get(parser, "versionfile_build") + cfg.tag_prefix = get(parser, "tag_prefix") + if cfg.tag_prefix in ("''", '""'): + cfg.tag_prefix = "" + cfg.parentdir_prefix = get(parser, "parentdir_prefix") + cfg.verbose = get(parser, "verbose") + return cfg + + +class NotThisMethod(Exception): + """Exception raised if a method is not valid for the current scenario.""" + + +# these dictionaries contain VCS-specific tools +LONG_VERSION_PY = {} +HANDLERS = {} + + +def register_vcs_handler(vcs, method): # decorator + """Decorator to mark a method as the handler for a particular VCS.""" + def decorate(f): + """Store f in HANDLERS[vcs][method].""" + if vcs not in HANDLERS: + HANDLERS[vcs] = {} + HANDLERS[vcs][method] = f + return f + return decorate + + +def run_command(commands, args, cwd=None, verbose=False, hide_stderr=False, + env=None): + """Call the given command(s).""" + assert isinstance(commands, list) + p = None + for c in commands: + try: + dispcmd = str([c] + args) + # remember shell=False, so use git.cmd on windows, not just git + p = subprocess.Popen([c] + args, cwd=cwd, env=env, + stdout=subprocess.PIPE, + stderr=(subprocess.PIPE if hide_stderr + else None)) + break + except EnvironmentError: + e = sys.exc_info()[1] + if e.errno == errno.ENOENT: + continue + if verbose: + print("unable to run %s" % dispcmd) + print(e) + return None, None + else: + if verbose: + print("unable to find command, tried %s" % (commands,)) + return None, None + stdout = p.communicate()[0].strip() + if sys.version_info[0] >= 3: + stdout = stdout.decode() + if p.returncode != 0: + if verbose: + print("unable to run %s (error)" % dispcmd) + print("stdout was %s" % stdout) + return None, p.returncode + return stdout, p.returncode + + +LONG_VERSION_PY['git'] = ''' +# This file helps to compute a version number in source trees obtained from +# git-archive tarball (such as those provided by githubs download-from-tag +# feature). Distribution tarballs (built by setup.py sdist) and build +# directories (produced by setup.py build) will contain a much shorter file +# that just contains the computed version number. + +# This file is released into the public domain. Generated by +# versioneer-0.18 (https://github.com/warner/python-versioneer) + +"""Git implementation of _version.py.""" + +import errno +import os +import re +import subprocess +import sys + + +def get_keywords(): + """Get the keywords needed to look up the version information.""" + # these strings will be replaced by git during git-archive. + # setup.py/versioneer.py will grep for the variable names, so they must + # each be defined on a line of their own. _version.py will just call + # get_keywords(). + git_refnames = "%(DOLLAR)sFormat:%%d%(DOLLAR)s" + git_full = "%(DOLLAR)sFormat:%%H%(DOLLAR)s" + git_date = "%(DOLLAR)sFormat:%%ci%(DOLLAR)s" + keywords = {"refnames": git_refnames, "full": git_full, "date": git_date} + return keywords + + +class VersioneerConfig: + """Container for Versioneer configuration parameters.""" + + +def get_config(): + """Create, populate and return the VersioneerConfig() object.""" + # these strings are filled in when 'setup.py versioneer' creates + # _version.py + cfg = VersioneerConfig() + cfg.VCS = "git" + cfg.style = "%(STYLE)s" + cfg.tag_prefix = "%(TAG_PREFIX)s" + cfg.parentdir_prefix = "%(PARENTDIR_PREFIX)s" + cfg.versionfile_source = "%(VERSIONFILE_SOURCE)s" + cfg.verbose = False + return cfg + + +class NotThisMethod(Exception): + """Exception raised if a method is not valid for the current scenario.""" + + +LONG_VERSION_PY = {} +HANDLERS = {} + + +def register_vcs_handler(vcs, method): # decorator + """Decorator to mark a method as the handler for a particular VCS.""" + def decorate(f): + """Store f in HANDLERS[vcs][method].""" + if vcs not in HANDLERS: + HANDLERS[vcs] = {} + HANDLERS[vcs][method] = f + return f + return decorate + + +def run_command(commands, args, cwd=None, verbose=False, hide_stderr=False, + env=None): + """Call the given command(s).""" + assert isinstance(commands, list) + p = None + for c in commands: + try: + dispcmd = str([c] + args) + # remember shell=False, so use git.cmd on windows, not just git + p = subprocess.Popen([c] + args, cwd=cwd, env=env, + stdout=subprocess.PIPE, + stderr=(subprocess.PIPE if hide_stderr + else None)) + break + except EnvironmentError: + e = sys.exc_info()[1] + if e.errno == errno.ENOENT: + continue + if verbose: + print("unable to run %%s" %% dispcmd) + print(e) + return None, None + else: + if verbose: + print("unable to find command, tried %%s" %% (commands,)) + return None, None + stdout = p.communicate()[0].strip() + if sys.version_info[0] >= 3: + stdout = stdout.decode() + if p.returncode != 0: + if verbose: + print("unable to run %%s (error)" %% dispcmd) + print("stdout was %%s" %% stdout) + return None, p.returncode + return stdout, p.returncode + + +def versions_from_parentdir(parentdir_prefix, root, verbose): + """Try to determine the version from the parent directory name. + + Source tarballs conventionally unpack into a directory that includes both + the project name and a version string. We will also support searching up + two directory levels for an appropriately named parent directory + """ + rootdirs = [] + + for i in range(3): + dirname = os.path.basename(root) + if dirname.startswith(parentdir_prefix): + return {"version": dirname[len(parentdir_prefix):], + "full-revisionid": None, + "dirty": False, "error": None, "date": None} + else: + rootdirs.append(root) + root = os.path.dirname(root) # up a level + + if verbose: + print("Tried directories %%s but none started with prefix %%s" %% + (str(rootdirs), parentdir_prefix)) + raise NotThisMethod("rootdir doesn't start with parentdir_prefix") + + +@register_vcs_handler("git", "get_keywords") +def git_get_keywords(versionfile_abs): + """Extract version information from the given file.""" + # the code embedded in _version.py can just fetch the value of these + # keywords. When used from setup.py, we don't want to import _version.py, + # so we do it with a regexp instead. This function is not used from + # _version.py. + keywords = {} + try: + f = open(versionfile_abs, "r") + for line in f.readlines(): + if line.strip().startswith("git_refnames ="): + mo = re.search(r'=\s*"(.*)"', line) + if mo: + keywords["refnames"] = mo.group(1) + if line.strip().startswith("git_full ="): + mo = re.search(r'=\s*"(.*)"', line) + if mo: + keywords["full"] = mo.group(1) + if line.strip().startswith("git_date ="): + mo = re.search(r'=\s*"(.*)"', line) + if mo: + keywords["date"] = mo.group(1) + f.close() + except EnvironmentError: + pass + return keywords + + +@register_vcs_handler("git", "keywords") +def git_versions_from_keywords(keywords, tag_prefix, verbose): + """Get version information from git keywords.""" + if not keywords: + raise NotThisMethod("no keywords at all, weird") + date = keywords.get("date") + if date is not None: + # git-2.2.0 added "%%cI", which expands to an ISO-8601 -compliant + # datestamp. However we prefer "%%ci" (which expands to an "ISO-8601 + # -like" string, which we must then edit to make compliant), because + # it's been around since git-1.5.3, and it's too difficult to + # discover which version we're using, or to work around using an + # older one. + date = date.strip().replace(" ", "T", 1).replace(" ", "", 1) + refnames = keywords["refnames"].strip() + if refnames.startswith("$Format"): + if verbose: + print("keywords are unexpanded, not using") + raise NotThisMethod("unexpanded keywords, not a git-archive tarball") + refs = set([r.strip() for r in refnames.strip("()").split(",")]) + # starting in git-1.8.3, tags are listed as "tag: foo-1.0" instead of + # just "foo-1.0". If we see a "tag: " prefix, prefer those. + TAG = "tag: " + tags = set([r[len(TAG):] for r in refs if r.startswith(TAG)]) + if not tags: + # Either we're using git < 1.8.3, or there really are no tags. We use + # a heuristic: assume all version tags have a digit. The old git %%d + # expansion behaves like git log --decorate=short and strips out the + # refs/heads/ and refs/tags/ prefixes that would let us distinguish + # between branches and tags. By ignoring refnames without digits, we + # filter out many common branch names like "release" and + # "stabilization", as well as "HEAD" and "master". + tags = set([r for r in refs if re.search(r'\d', r)]) + if verbose: + print("discarding '%%s', no digits" %% ",".join(refs - tags)) + if verbose: + print("likely tags: %%s" %% ",".join(sorted(tags))) + for ref in sorted(tags): + # sorting will prefer e.g. "2.0" over "2.0rc1" + if ref.startswith(tag_prefix): + r = ref[len(tag_prefix):] + if verbose: + print("picking %%s" %% r) + return {"version": r, + "full-revisionid": keywords["full"].strip(), + "dirty": False, "error": None, + "date": date} + # no suitable tags, so version is "0+unknown", but full hex is still there + if verbose: + print("no suitable tags, using unknown + full revision id") + return {"version": "0+unknown", + "full-revisionid": keywords["full"].strip(), + "dirty": False, "error": "no suitable tags", "date": None} + + +@register_vcs_handler("git", "pieces_from_vcs") +def git_pieces_from_vcs(tag_prefix, root, verbose, run_command=run_command): + """Get version from 'git describe' in the root of the source tree. + + This only gets called if the git-archive 'subst' keywords were *not* + expanded, and _version.py hasn't already been rewritten with a short + version string, meaning we're inside a checked out source tree. + """ + GITS = ["git"] + if sys.platform == "win32": + GITS = ["git.cmd", "git.exe"] + + out, rc = run_command(GITS, ["rev-parse", "--git-dir"], cwd=root, + hide_stderr=True) + if rc != 0: + if verbose: + print("Directory %%s not under git control" %% root) + raise NotThisMethod("'git rev-parse --git-dir' returned error") + + # if there is a tag matching tag_prefix, this yields TAG-NUM-gHEX[-dirty] + # if there isn't one, this yields HEX[-dirty] (no NUM) + describe_out, rc = run_command(GITS, ["describe", "--tags", "--dirty", + "--always", "--long", + "--match", "%%s*" %% tag_prefix], + cwd=root) + # --long was added in git-1.5.5 + if describe_out is None: + raise NotThisMethod("'git describe' failed") + describe_out = describe_out.strip() + full_out, rc = run_command(GITS, ["rev-parse", "HEAD"], cwd=root) + if full_out is None: + raise NotThisMethod("'git rev-parse' failed") + full_out = full_out.strip() + + pieces = {} + pieces["long"] = full_out + pieces["short"] = full_out[:7] # maybe improved later + pieces["error"] = None + + # parse describe_out. It will be like TAG-NUM-gHEX[-dirty] or HEX[-dirty] + # TAG might have hyphens. + git_describe = describe_out + + # look for -dirty suffix + dirty = git_describe.endswith("-dirty") + pieces["dirty"] = dirty + if dirty: + git_describe = git_describe[:git_describe.rindex("-dirty")] + + # now we have TAG-NUM-gHEX or HEX + + if "-" in git_describe: + # TAG-NUM-gHEX + mo = re.search(r'^(.+)-(\d+)-g([0-9a-f]+)$', git_describe) + if not mo: + # unparseable. Maybe git-describe is misbehaving? + pieces["error"] = ("unable to parse git-describe output: '%%s'" + %% describe_out) + return pieces + + # tag + full_tag = mo.group(1) + if not full_tag.startswith(tag_prefix): + if verbose: + fmt = "tag '%%s' doesn't start with prefix '%%s'" + print(fmt %% (full_tag, tag_prefix)) + pieces["error"] = ("tag '%%s' doesn't start with prefix '%%s'" + %% (full_tag, tag_prefix)) + return pieces + pieces["closest-tag"] = full_tag[len(tag_prefix):] + + # distance: number of commits since tag + pieces["distance"] = int(mo.group(2)) + + # commit: short hex revision ID + pieces["short"] = mo.group(3) + + else: + # HEX: no tags + pieces["closest-tag"] = None + count_out, rc = run_command(GITS, ["rev-list", "HEAD", "--count"], + cwd=root) + pieces["distance"] = int(count_out) # total number of commits + + # commit date: see ISO-8601 comment in git_versions_from_keywords() + date = run_command(GITS, ["show", "-s", "--format=%%ci", "HEAD"], + cwd=root)[0].strip() + pieces["date"] = date.strip().replace(" ", "T", 1).replace(" ", "", 1) + + return pieces + + +def plus_or_dot(pieces): + """Return a + if we don't already have one, else return a .""" + if "+" in pieces.get("closest-tag", ""): + return "." + return "+" + + +def render_pep440(pieces): + """Build up version string, with post-release "local version identifier". + + Our goal: TAG[+DISTANCE.gHEX[.dirty]] . Note that if you + get a tagged build and then dirty it, you'll get TAG+0.gHEX.dirty + + Exceptions: + 1: no tags. git_describe was just HEX. 0+untagged.DISTANCE.gHEX[.dirty] + """ + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"] or pieces["dirty"]: + rendered += plus_or_dot(pieces) + rendered += "%%d.g%%s" %% (pieces["distance"], pieces["short"]) + if pieces["dirty"]: + rendered += ".dirty" + else: + # exception #1 + rendered = "0+untagged.%%d.g%%s" %% (pieces["distance"], + pieces["short"]) + if pieces["dirty"]: + rendered += ".dirty" + return rendered + + +def render_pep440_pre(pieces): + """TAG[.post.devDISTANCE] -- No -dirty. + + Exceptions: + 1: no tags. 0.post.devDISTANCE + """ + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"]: + rendered += ".post.dev%%d" %% pieces["distance"] + else: + # exception #1 + rendered = "0.post.dev%%d" %% pieces["distance"] + return rendered + + +def render_pep440_post(pieces): + """TAG[.postDISTANCE[.dev0]+gHEX] . + + The ".dev0" means dirty. Note that .dev0 sorts backwards + (a dirty tree will appear "older" than the corresponding clean one), + but you shouldn't be releasing software with -dirty anyways. + + Exceptions: + 1: no tags. 0.postDISTANCE[.dev0] + """ + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"] or pieces["dirty"]: + rendered += ".post%%d" %% pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + rendered += plus_or_dot(pieces) + rendered += "g%%s" %% pieces["short"] + else: + # exception #1 + rendered = "0.post%%d" %% pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + rendered += "+g%%s" %% pieces["short"] + return rendered + + +def render_pep440_old(pieces): + """TAG[.postDISTANCE[.dev0]] . + + The ".dev0" means dirty. + + Eexceptions: + 1: no tags. 0.postDISTANCE[.dev0] + """ + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"] or pieces["dirty"]: + rendered += ".post%%d" %% pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + else: + # exception #1 + rendered = "0.post%%d" %% pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + return rendered + + +def render_git_describe(pieces): + """TAG[-DISTANCE-gHEX][-dirty]. + + Like 'git describe --tags --dirty --always'. + + Exceptions: + 1: no tags. HEX[-dirty] (note: no 'g' prefix) + """ + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"]: + rendered += "-%%d-g%%s" %% (pieces["distance"], pieces["short"]) + else: + # exception #1 + rendered = pieces["short"] + if pieces["dirty"]: + rendered += "-dirty" + return rendered + + +def render_git_describe_long(pieces): + """TAG-DISTANCE-gHEX[-dirty]. + + Like 'git describe --tags --dirty --always -long'. + The distance/hash is unconditional. + + Exceptions: + 1: no tags. HEX[-dirty] (note: no 'g' prefix) + """ + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + rendered += "-%%d-g%%s" %% (pieces["distance"], pieces["short"]) + else: + # exception #1 + rendered = pieces["short"] + if pieces["dirty"]: + rendered += "-dirty" + return rendered + + +def render(pieces, style): + """Render the given version pieces into the requested style.""" + if pieces["error"]: + return {"version": "unknown", + "full-revisionid": pieces.get("long"), + "dirty": None, + "error": pieces["error"], + "date": None} + + if not style or style == "default": + style = "pep440" # the default + + if style == "pep440": + rendered = render_pep440(pieces) + elif style == "pep440-pre": + rendered = render_pep440_pre(pieces) + elif style == "pep440-post": + rendered = render_pep440_post(pieces) + elif style == "pep440-old": + rendered = render_pep440_old(pieces) + elif style == "git-describe": + rendered = render_git_describe(pieces) + elif style == "git-describe-long": + rendered = render_git_describe_long(pieces) + else: + raise ValueError("unknown style '%%s'" %% style) + + return {"version": rendered, "full-revisionid": pieces["long"], + "dirty": pieces["dirty"], "error": None, + "date": pieces.get("date")} + + +def get_versions(): + """Get version information or return default if unable to do so.""" + # I am in _version.py, which lives at ROOT/VERSIONFILE_SOURCE. If we have + # __file__, we can work backwards from there to the root. Some + # py2exe/bbfreeze/non-CPython implementations don't do __file__, in which + # case we can only use expanded keywords. + + cfg = get_config() + verbose = cfg.verbose + + try: + return git_versions_from_keywords(get_keywords(), cfg.tag_prefix, + verbose) + except NotThisMethod: + pass + + try: + root = os.path.realpath(__file__) + # versionfile_source is the relative path from the top of the source + # tree (where the .git directory might live) to this file. Invert + # this to find the root from __file__. + for i in cfg.versionfile_source.split('/'): + root = os.path.dirname(root) + except NameError: + return {"version": "0+unknown", "full-revisionid": None, + "dirty": None, + "error": "unable to find root of source tree", + "date": None} + + try: + pieces = git_pieces_from_vcs(cfg.tag_prefix, root, verbose) + return render(pieces, cfg.style) + except NotThisMethod: + pass + + try: + if cfg.parentdir_prefix: + return versions_from_parentdir(cfg.parentdir_prefix, root, verbose) + except NotThisMethod: + pass + + return {"version": "0+unknown", "full-revisionid": None, + "dirty": None, + "error": "unable to compute version", "date": None} +''' + + +@register_vcs_handler("git", "get_keywords") +def git_get_keywords(versionfile_abs): + """Extract version information from the given file.""" + # the code embedded in _version.py can just fetch the value of these + # keywords. When used from setup.py, we don't want to import _version.py, + # so we do it with a regexp instead. This function is not used from + # _version.py. + keywords = {} + try: + f = open(versionfile_abs, "r") + for line in f.readlines(): + if line.strip().startswith("git_refnames ="): + mo = re.search(r'=\s*"(.*)"', line) + if mo: + keywords["refnames"] = mo.group(1) + if line.strip().startswith("git_full ="): + mo = re.search(r'=\s*"(.*)"', line) + if mo: + keywords["full"] = mo.group(1) + if line.strip().startswith("git_date ="): + mo = re.search(r'=\s*"(.*)"', line) + if mo: + keywords["date"] = mo.group(1) + f.close() + except EnvironmentError: + pass + return keywords + + +@register_vcs_handler("git", "keywords") +def git_versions_from_keywords(keywords, tag_prefix, verbose): + """Get version information from git keywords.""" + if not keywords: + raise NotThisMethod("no keywords at all, weird") + date = keywords.get("date") + if date is not None: + # git-2.2.0 added "%cI", which expands to an ISO-8601 -compliant + # datestamp. However we prefer "%ci" (which expands to an "ISO-8601 + # -like" string, which we must then edit to make compliant), because + # it's been around since git-1.5.3, and it's too difficult to + # discover which version we're using, or to work around using an + # older one. + date = date.strip().replace(" ", "T", 1).replace(" ", "", 1) + refnames = keywords["refnames"].strip() + if refnames.startswith("$Format"): + if verbose: + print("keywords are unexpanded, not using") + raise NotThisMethod("unexpanded keywords, not a git-archive tarball") + refs = set([r.strip() for r in refnames.strip("()").split(",")]) + # starting in git-1.8.3, tags are listed as "tag: foo-1.0" instead of + # just "foo-1.0". If we see a "tag: " prefix, prefer those. + TAG = "tag: " + tags = set([r[len(TAG):] for r in refs if r.startswith(TAG)]) + if not tags: + # Either we're using git < 1.8.3, or there really are no tags. We use + # a heuristic: assume all version tags have a digit. The old git %d + # expansion behaves like git log --decorate=short and strips out the + # refs/heads/ and refs/tags/ prefixes that would let us distinguish + # between branches and tags. By ignoring refnames without digits, we + # filter out many common branch names like "release" and + # "stabilization", as well as "HEAD" and "master". + tags = set([r for r in refs if re.search(r'\d', r)]) + if verbose: + print("discarding '%s', no digits" % ",".join(refs - tags)) + if verbose: + print("likely tags: %s" % ",".join(sorted(tags))) + for ref in sorted(tags): + # sorting will prefer e.g. "2.0" over "2.0rc1" + if ref.startswith(tag_prefix): + r = ref[len(tag_prefix):] + if verbose: + print("picking %s" % r) + return {"version": r, + "full-revisionid": keywords["full"].strip(), + "dirty": False, "error": None, + "date": date} + # no suitable tags, so version is "0+unknown", but full hex is still there + if verbose: + print("no suitable tags, using unknown + full revision id") + return {"version": "0+unknown", + "full-revisionid": keywords["full"].strip(), + "dirty": False, "error": "no suitable tags", "date": None} + + +@register_vcs_handler("git", "pieces_from_vcs") +def git_pieces_from_vcs(tag_prefix, root, verbose, run_command=run_command): + """Get version from 'git describe' in the root of the source tree. + + This only gets called if the git-archive 'subst' keywords were *not* + expanded, and _version.py hasn't already been rewritten with a short + version string, meaning we're inside a checked out source tree. + """ + GITS = ["git"] + if sys.platform == "win32": + GITS = ["git.cmd", "git.exe"] + + out, rc = run_command(GITS, ["rev-parse", "--git-dir"], cwd=root, + hide_stderr=True) + if rc != 0: + if verbose: + print("Directory %s not under git control" % root) + raise NotThisMethod("'git rev-parse --git-dir' returned error") + + # if there is a tag matching tag_prefix, this yields TAG-NUM-gHEX[-dirty] + # if there isn't one, this yields HEX[-dirty] (no NUM) + describe_out, rc = run_command(GITS, ["describe", "--tags", "--dirty", + "--always", "--long", + "--match", "%s*" % tag_prefix], + cwd=root) + # --long was added in git-1.5.5 + if describe_out is None: + raise NotThisMethod("'git describe' failed") + describe_out = describe_out.strip() + full_out, rc = run_command(GITS, ["rev-parse", "HEAD"], cwd=root) + if full_out is None: + raise NotThisMethod("'git rev-parse' failed") + full_out = full_out.strip() + + pieces = {} + pieces["long"] = full_out + pieces["short"] = full_out[:7] # maybe improved later + pieces["error"] = None + + # parse describe_out. It will be like TAG-NUM-gHEX[-dirty] or HEX[-dirty] + # TAG might have hyphens. + git_describe = describe_out + + # look for -dirty suffix + dirty = git_describe.endswith("-dirty") + pieces["dirty"] = dirty + if dirty: + git_describe = git_describe[:git_describe.rindex("-dirty")] + + # now we have TAG-NUM-gHEX or HEX + + if "-" in git_describe: + # TAG-NUM-gHEX + mo = re.search(r'^(.+)-(\d+)-g([0-9a-f]+)$', git_describe) + if not mo: + # unparseable. Maybe git-describe is misbehaving? + pieces["error"] = ("unable to parse git-describe output: '%s'" + % describe_out) + return pieces + + # tag + full_tag = mo.group(1) + if not full_tag.startswith(tag_prefix): + if verbose: + fmt = "tag '%s' doesn't start with prefix '%s'" + print(fmt % (full_tag, tag_prefix)) + pieces["error"] = ("tag '%s' doesn't start with prefix '%s'" + % (full_tag, tag_prefix)) + return pieces + pieces["closest-tag"] = full_tag[len(tag_prefix):] + + # distance: number of commits since tag + pieces["distance"] = int(mo.group(2)) + + # commit: short hex revision ID + pieces["short"] = mo.group(3) + + else: + # HEX: no tags + pieces["closest-tag"] = None + count_out, rc = run_command(GITS, ["rev-list", "HEAD", "--count"], + cwd=root) + pieces["distance"] = int(count_out) # total number of commits + + # commit date: see ISO-8601 comment in git_versions_from_keywords() + date = run_command(GITS, ["show", "-s", "--format=%ci", "HEAD"], + cwd=root)[0].strip() + pieces["date"] = date.strip().replace(" ", "T", 1).replace(" ", "", 1) + + return pieces + + +def do_vcs_install(manifest_in, versionfile_source, ipy): + """Git-specific installation logic for Versioneer. + + For Git, this means creating/changing .gitattributes to mark _version.py + for export-subst keyword substitution. + """ + GITS = ["git"] + if sys.platform == "win32": + GITS = ["git.cmd", "git.exe"] + files = [manifest_in, versionfile_source] + if ipy: + files.append(ipy) + try: + me = __file__ + if me.endswith(".pyc") or me.endswith(".pyo"): + me = os.path.splitext(me)[0] + ".py" + versioneer_file = os.path.relpath(me) + except NameError: + versioneer_file = "versioneer.py" + files.append(versioneer_file) + present = False + try: + f = open(".gitattributes", "r") + for line in f.readlines(): + if line.strip().startswith(versionfile_source): + if "export-subst" in line.strip().split()[1:]: + present = True + f.close() + except EnvironmentError: + pass + if not present: + f = open(".gitattributes", "a+") + f.write("%s export-subst\n" % versionfile_source) + f.close() + files.append(".gitattributes") + run_command(GITS, ["add", "--"] + files) + + +def versions_from_parentdir(parentdir_prefix, root, verbose): + """Try to determine the version from the parent directory name. + + Source tarballs conventionally unpack into a directory that includes both + the project name and a version string. We will also support searching up + two directory levels for an appropriately named parent directory + """ + rootdirs = [] + + for i in range(3): + dirname = os.path.basename(root) + if dirname.startswith(parentdir_prefix): + return {"version": dirname[len(parentdir_prefix):], + "full-revisionid": None, + "dirty": False, "error": None, "date": None} + else: + rootdirs.append(root) + root = os.path.dirname(root) # up a level + + if verbose: + print("Tried directories %s but none started with prefix %s" % + (str(rootdirs), parentdir_prefix)) + raise NotThisMethod("rootdir doesn't start with parentdir_prefix") + + +SHORT_VERSION_PY = """ +# This file was generated by 'versioneer.py' (0.18) from +# revision-control system data, or from the parent directory name of an +# unpacked source archive. Distribution tarballs contain a pre-generated copy +# of this file. + +import json + +version_json = ''' +%s +''' # END VERSION_JSON + + +def get_versions(): + return json.loads(version_json) +""" + + +def versions_from_file(filename): + """Try to determine the version from _version.py if present.""" + try: + with open(filename) as f: + contents = f.read() + except EnvironmentError: + raise NotThisMethod("unable to read _version.py") + mo = re.search(r"version_json = '''\n(.*)''' # END VERSION_JSON", + contents, re.M | re.S) + if not mo: + mo = re.search(r"version_json = '''\r\n(.*)''' # END VERSION_JSON", + contents, re.M | re.S) + if not mo: + raise NotThisMethod("no version_json in _version.py") + return json.loads(mo.group(1)) + + +def write_to_version_file(filename, versions): + """Write the given version number to the given _version.py file.""" + os.unlink(filename) + contents = json.dumps(versions, sort_keys=True, + indent=1, separators=(",", ": ")) + with open(filename, "w") as f: + f.write(SHORT_VERSION_PY % contents) + + print("set %s to '%s'" % (filename, versions["version"])) + + +def plus_or_dot(pieces): + """Return a + if we don't already have one, else return a .""" + if "+" in pieces.get("closest-tag", ""): + return "." + return "+" + + +def render_pep440(pieces): + """Build up version string, with post-release "local version identifier". + + Our goal: TAG[+DISTANCE.gHEX[.dirty]] . Note that if you + get a tagged build and then dirty it, you'll get TAG+0.gHEX.dirty + + Exceptions: + 1: no tags. git_describe was just HEX. 0+untagged.DISTANCE.gHEX[.dirty] + """ + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"] or pieces["dirty"]: + rendered += plus_or_dot(pieces) + rendered += "%d.g%s" % (pieces["distance"], pieces["short"]) + if pieces["dirty"]: + rendered += ".dirty" + else: + # exception #1 + rendered = "0+untagged.%d.g%s" % (pieces["distance"], + pieces["short"]) + if pieces["dirty"]: + rendered += ".dirty" + return rendered + + +def render_pep440_pre(pieces): + """TAG[.post.devDISTANCE] -- No -dirty. + + Exceptions: + 1: no tags. 0.post.devDISTANCE + """ + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"]: + rendered += ".post.dev%d" % pieces["distance"] + else: + # exception #1 + rendered = "0.post.dev%d" % pieces["distance"] + return rendered + + +def render_pep440_post(pieces): + """TAG[.postDISTANCE[.dev0]+gHEX] . + + The ".dev0" means dirty. Note that .dev0 sorts backwards + (a dirty tree will appear "older" than the corresponding clean one), + but you shouldn't be releasing software with -dirty anyways. + + Exceptions: + 1: no tags. 0.postDISTANCE[.dev0] + """ + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"] or pieces["dirty"]: + rendered += ".post%d" % pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + rendered += plus_or_dot(pieces) + rendered += "g%s" % pieces["short"] + else: + # exception #1 + rendered = "0.post%d" % pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + rendered += "+g%s" % pieces["short"] + return rendered + + +def render_pep440_old(pieces): + """TAG[.postDISTANCE[.dev0]] . + + The ".dev0" means dirty. + + Eexceptions: + 1: no tags. 0.postDISTANCE[.dev0] + """ + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"] or pieces["dirty"]: + rendered += ".post%d" % pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + else: + # exception #1 + rendered = "0.post%d" % pieces["distance"] + if pieces["dirty"]: + rendered += ".dev0" + return rendered + + +def render_git_describe(pieces): + """TAG[-DISTANCE-gHEX][-dirty]. + + Like 'git describe --tags --dirty --always'. + + Exceptions: + 1: no tags. HEX[-dirty] (note: no 'g' prefix) + """ + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + if pieces["distance"]: + rendered += "-%d-g%s" % (pieces["distance"], pieces["short"]) + else: + # exception #1 + rendered = pieces["short"] + if pieces["dirty"]: + rendered += "-dirty" + return rendered + + +def render_git_describe_long(pieces): + """TAG-DISTANCE-gHEX[-dirty]. + + Like 'git describe --tags --dirty --always -long'. + The distance/hash is unconditional. + + Exceptions: + 1: no tags. HEX[-dirty] (note: no 'g' prefix) + """ + if pieces["closest-tag"]: + rendered = pieces["closest-tag"] + rendered += "-%d-g%s" % (pieces["distance"], pieces["short"]) + else: + # exception #1 + rendered = pieces["short"] + if pieces["dirty"]: + rendered += "-dirty" + return rendered + + +def render(pieces, style): + """Render the given version pieces into the requested style.""" + if pieces["error"]: + return {"version": "unknown", + "full-revisionid": pieces.get("long"), + "dirty": None, + "error": pieces["error"], + "date": None} + + if not style or style == "default": + style = "pep440" # the default + + if style == "pep440": + rendered = render_pep440(pieces) + elif style == "pep440-pre": + rendered = render_pep440_pre(pieces) + elif style == "pep440-post": + rendered = render_pep440_post(pieces) + elif style == "pep440-old": + rendered = render_pep440_old(pieces) + elif style == "git-describe": + rendered = render_git_describe(pieces) + elif style == "git-describe-long": + rendered = render_git_describe_long(pieces) + else: + raise ValueError("unknown style '%s'" % style) + + return {"version": rendered, "full-revisionid": pieces["long"], + "dirty": pieces["dirty"], "error": None, + "date": pieces.get("date")} + + +class VersioneerBadRootError(Exception): + """The project root directory is unknown or missing key files.""" + + +def get_versions(verbose=False): + """Get the project version from whatever source is available. + + Returns dict with two keys: 'version' and 'full'. + """ + if "versioneer" in sys.modules: + # see the discussion in cmdclass.py:get_cmdclass() + del sys.modules["versioneer"] + + root = get_root() + cfg = get_config_from_root(root) + + assert cfg.VCS is not None, "please set [versioneer]VCS= in setup.cfg" + handlers = HANDLERS.get(cfg.VCS) + assert handlers, "unrecognized VCS '%s'" % cfg.VCS + verbose = verbose or cfg.verbose + assert cfg.versionfile_source is not None, \ + "please set versioneer.versionfile_source" + assert cfg.tag_prefix is not None, "please set versioneer.tag_prefix" + + versionfile_abs = os.path.join(root, cfg.versionfile_source) + + # extract version from first of: _version.py, VCS command (e.g. 'git + # describe'), parentdir. This is meant to work for developers using a + # source checkout, for users of a tarball created by 'setup.py sdist', + # and for users of a tarball/zipball created by 'git archive' or github's + # download-from-tag feature or the equivalent in other VCSes. + + get_keywords_f = handlers.get("get_keywords") + from_keywords_f = handlers.get("keywords") + if get_keywords_f and from_keywords_f: + try: + keywords = get_keywords_f(versionfile_abs) + ver = from_keywords_f(keywords, cfg.tag_prefix, verbose) + if verbose: + print("got version from expanded keyword %s" % ver) + return ver + except NotThisMethod: + pass + + try: + ver = versions_from_file(versionfile_abs) + if verbose: + print("got version from file %s %s" % (versionfile_abs, ver)) + return ver + except NotThisMethod: + pass + + from_vcs_f = handlers.get("pieces_from_vcs") + if from_vcs_f: + try: + pieces = from_vcs_f(cfg.tag_prefix, root, verbose) + ver = render(pieces, cfg.style) + if verbose: + print("got version from VCS %s" % ver) + return ver + except NotThisMethod: + pass + + try: + if cfg.parentdir_prefix: + ver = versions_from_parentdir(cfg.parentdir_prefix, root, verbose) + if verbose: + print("got version from parentdir %s" % ver) + return ver + except NotThisMethod: + pass + + if verbose: + print("unable to compute version") + + return {"version": "0+unknown", "full-revisionid": None, + "dirty": None, "error": "unable to compute version", + "date": None} + + +def get_version(): + """Get the short version string for this project.""" + return get_versions()["version"] + + +def get_cmdclass(): + """Get the custom setuptools/distutils subclasses used by Versioneer.""" + if "versioneer" in sys.modules: + del sys.modules["versioneer"] + # this fixes the "python setup.py develop" case (also 'install' and + # 'easy_install .'), in which subdependencies of the main project are + # built (using setup.py bdist_egg) in the same python process. Assume + # a main project A and a dependency B, which use different versions + # of Versioneer. A's setup.py imports A's Versioneer, leaving it in + # sys.modules by the time B's setup.py is executed, causing B to run + # with the wrong versioneer. Setuptools wraps the sub-dep builds in a + # sandbox that restores sys.modules to it's pre-build state, so the + # parent is protected against the child's "import versioneer". By + # removing ourselves from sys.modules here, before the child build + # happens, we protect the child from the parent's versioneer too. + # Also see https://github.com/warner/python-versioneer/issues/52 + + cmds = {} + + # we add "version" to both distutils and setuptools + from distutils.core import Command + + class cmd_version(Command): + description = "report generated version string" + user_options = [] + boolean_options = [] + + def initialize_options(self): + pass + + def finalize_options(self): + pass + + def run(self): + vers = get_versions(verbose=True) + print("Version: %s" % vers["version"]) + print(" full-revisionid: %s" % vers.get("full-revisionid")) + print(" dirty: %s" % vers.get("dirty")) + print(" date: %s" % vers.get("date")) + if vers["error"]: + print(" error: %s" % vers["error"]) + cmds["version"] = cmd_version + + # we override "build_py" in both distutils and setuptools + # + # most invocation pathways end up running build_py: + # distutils/build -> build_py + # distutils/install -> distutils/build ->.. + # setuptools/bdist_wheel -> distutils/install ->.. + # setuptools/bdist_egg -> distutils/install_lib -> build_py + # setuptools/install -> bdist_egg ->.. + # setuptools/develop -> ? + # pip install: + # copies source tree to a tempdir before running egg_info/etc + # if .git isn't copied too, 'git describe' will fail + # then does setup.py bdist_wheel, or sometimes setup.py install + # setup.py egg_info -> ? + + # we override different "build_py" commands for both environments + if "setuptools" in sys.modules: + from setuptools.command.build_py import build_py as _build_py + else: + from distutils.command.build_py import build_py as _build_py + + class cmd_build_py(_build_py): + def run(self): + root = get_root() + cfg = get_config_from_root(root) + versions = get_versions() + _build_py.run(self) + # now locate _version.py in the new build/ directory and replace + # it with an updated value + if cfg.versionfile_build: + target_versionfile = os.path.join(self.build_lib, + cfg.versionfile_build) + print("UPDATING %s" % target_versionfile) + write_to_version_file(target_versionfile, versions) + cmds["build_py"] = cmd_build_py + + if "cx_Freeze" in sys.modules: # cx_freeze enabled? + from cx_Freeze.dist import build_exe as _build_exe + # nczeczulin reports that py2exe won't like the pep440-style string + # as FILEVERSION, but it can be used for PRODUCTVERSION, e.g. + # setup(console=[{ + # "version": versioneer.get_version().split("+", 1)[0], # FILEVERSION + # "product_version": versioneer.get_version(), + # ... + + class cmd_build_exe(_build_exe): + def run(self): + root = get_root() + cfg = get_config_from_root(root) + versions = get_versions() + target_versionfile = cfg.versionfile_source + print("UPDATING %s" % target_versionfile) + write_to_version_file(target_versionfile, versions) + + _build_exe.run(self) + os.unlink(target_versionfile) + with open(cfg.versionfile_source, "w") as f: + LONG = LONG_VERSION_PY[cfg.VCS] + f.write(LONG % + {"DOLLAR": "$", + "STYLE": cfg.style, + "TAG_PREFIX": cfg.tag_prefix, + "PARENTDIR_PREFIX": cfg.parentdir_prefix, + "VERSIONFILE_SOURCE": cfg.versionfile_source, + }) + cmds["build_exe"] = cmd_build_exe + del cmds["build_py"] + + if 'py2exe' in sys.modules: # py2exe enabled? + try: + from py2exe.distutils_buildexe import py2exe as _py2exe # py3 + except ImportError: + from py2exe.build_exe import py2exe as _py2exe # py2 + + class cmd_py2exe(_py2exe): + def run(self): + root = get_root() + cfg = get_config_from_root(root) + versions = get_versions() + target_versionfile = cfg.versionfile_source + print("UPDATING %s" % target_versionfile) + write_to_version_file(target_versionfile, versions) + + _py2exe.run(self) + os.unlink(target_versionfile) + with open(cfg.versionfile_source, "w") as f: + LONG = LONG_VERSION_PY[cfg.VCS] + f.write(LONG % + {"DOLLAR": "$", + "STYLE": cfg.style, + "TAG_PREFIX": cfg.tag_prefix, + "PARENTDIR_PREFIX": cfg.parentdir_prefix, + "VERSIONFILE_SOURCE": cfg.versionfile_source, + }) + cmds["py2exe"] = cmd_py2exe + + # we override different "sdist" commands for both environments + if "setuptools" in sys.modules: + from setuptools.command.sdist import sdist as _sdist + else: + from distutils.command.sdist import sdist as _sdist + + class cmd_sdist(_sdist): + def run(self): + versions = get_versions() + self._versioneer_generated_versions = versions + # unless we update this, the command will keep using the old + # version + self.distribution.metadata.version = versions["version"] + return _sdist.run(self) + + def make_release_tree(self, base_dir, files): + root = get_root() + cfg = get_config_from_root(root) + _sdist.make_release_tree(self, base_dir, files) + # now locate _version.py in the new base_dir directory + # (remembering that it may be a hardlink) and replace it with an + # updated value + target_versionfile = os.path.join(base_dir, cfg.versionfile_source) + print("UPDATING %s" % target_versionfile) + write_to_version_file(target_versionfile, + self._versioneer_generated_versions) + cmds["sdist"] = cmd_sdist + + return cmds + + +CONFIG_ERROR = """ +setup.cfg is missing the necessary Versioneer configuration. You need +a section like: + + [versioneer] + VCS = git + style = pep440 + versionfile_source = src/myproject/_version.py + versionfile_build = myproject/_version.py + tag_prefix = + parentdir_prefix = myproject- + +You will also need to edit your setup.py to use the results: + + import versioneer + setup(version=versioneer.get_version(), + cmdclass=versioneer.get_cmdclass(), ...) + +Please read the docstring in ./versioneer.py for configuration instructions, +edit setup.cfg, and re-run the installer or 'python versioneer.py setup'. +""" + +SAMPLE_CONFIG = """ +# See the docstring in versioneer.py for instructions. Note that you must +# re-run 'versioneer.py setup' after changing this section, and commit the +# resulting files. + +[versioneer] +#VCS = git +#style = pep440 +#versionfile_source = +#versionfile_build = +#tag_prefix = +#parentdir_prefix = + +""" + +INIT_PY_SNIPPET = """ +from ._version import get_versions +__version__ = get_versions()['version'] +del get_versions +""" + + +def do_setup(): + """Main VCS-independent setup function for installing Versioneer.""" + root = get_root() + try: + cfg = get_config_from_root(root) + except (EnvironmentError, configparser.NoSectionError, + configparser.NoOptionError) as e: + if isinstance(e, (EnvironmentError, configparser.NoSectionError)): + print("Adding sample versioneer config to setup.cfg", + file=sys.stderr) + with open(os.path.join(root, "setup.cfg"), "a") as f: + f.write(SAMPLE_CONFIG) + print(CONFIG_ERROR, file=sys.stderr) + return 1 + + print(" creating %s" % cfg.versionfile_source) + with open(cfg.versionfile_source, "w") as f: + LONG = LONG_VERSION_PY[cfg.VCS] + f.write(LONG % {"DOLLAR": "$", + "STYLE": cfg.style, + "TAG_PREFIX": cfg.tag_prefix, + "PARENTDIR_PREFIX": cfg.parentdir_prefix, + "VERSIONFILE_SOURCE": cfg.versionfile_source, + }) + + ipy = os.path.join(os.path.dirname(cfg.versionfile_source), + "__init__.py") + if os.path.exists(ipy): + try: + with open(ipy, "r") as f: + old = f.read() + except EnvironmentError: + old = "" + if INIT_PY_SNIPPET not in old: + print(" appending to %s" % ipy) + with open(ipy, "a") as f: + f.write(INIT_PY_SNIPPET) + else: + print(" %s unmodified" % ipy) + else: + print(" %s doesn't exist, ok" % ipy) + ipy = None + + # Make sure both the top-level "versioneer.py" and versionfile_source + # (PKG/_version.py, used by runtime code) are in MANIFEST.in, so + # they'll be copied into source distributions. Pip won't be able to + # install the package without this. + manifest_in = os.path.join(root, "MANIFEST.in") + simple_includes = set() + try: + with open(manifest_in, "r") as f: + for line in f: + if line.startswith("include "): + for include in line.split()[1:]: + simple_includes.add(include) + except EnvironmentError: + pass + # That doesn't cover everything MANIFEST.in can do + # (http://docs.python.org/2/distutils/sourcedist.html#commands), so + # it might give some false negatives. Appending redundant 'include' + # lines is safe, though. + if "versioneer.py" not in simple_includes: + print(" appending 'versioneer.py' to MANIFEST.in") + with open(manifest_in, "a") as f: + f.write("include versioneer.py\n") + else: + print(" 'versioneer.py' already in MANIFEST.in") + if cfg.versionfile_source not in simple_includes: + print(" appending versionfile_source ('%s') to MANIFEST.in" % + cfg.versionfile_source) + with open(manifest_in, "a") as f: + f.write("include %s\n" % cfg.versionfile_source) + else: + print(" versionfile_source already in MANIFEST.in") + + # Make VCS-specific changes. For git, this means creating/changing + # .gitattributes to mark _version.py for export-subst keyword + # substitution. + do_vcs_install(manifest_in, cfg.versionfile_source, ipy) + return 0 + + +def scan_setup_py(): + """Validate the contents of setup.py against Versioneer's expectations.""" + found = set() + setters = False + errors = 0 + with open("setup.py", "r") as f: + for line in f.readlines(): + if "import versioneer" in line: + found.add("import") + if "versioneer.get_cmdclass()" in line: + found.add("cmdclass") + if "versioneer.get_version()" in line: + found.add("get_version") + if "versioneer.VCS" in line: + setters = True + if "versioneer.versionfile_source" in line: + setters = True + if len(found) != 3: + print("") + print("Your setup.py appears to be missing some important items") + print("(but I might be wrong). Please make sure it has something") + print("roughly like the following:") + print("") + print(" import versioneer") + print(" setup( version=versioneer.get_version(),") + print(" cmdclass=versioneer.get_cmdclass(), ...)") + print("") + errors += 1 + if setters: + print("You should remove lines like 'versioneer.VCS = ' and") + print("'versioneer.versionfile_source = ' . This configuration") + print("now lives in setup.cfg, and should be removed from setup.py") + print("") + errors += 1 + return errors + + +if __name__ == "__main__": + cmd = sys.argv[1] + if cmd == "setup": + errors = do_setup() + errors += scan_setup_py() + if errors: + sys.exit(1)