From: K. Richard Pixley <rich@cygnus>
Date: Sat, 13 Apr 1991 07:41:11 +0000 (+0000)
Subject: Nearly complete.  Still needs pointer to "more doc".
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=5083ec81b0d5c8b1c351eb455e8181d278b4cd3c;p=binutils-gdb.git

Nearly complete.  Still needs pointer to "more doc".
---

diff --git a/INSTALL b/INSTALL
index 4d0978e0be3..4f5020e89da 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,7 +1,85 @@
-* configure
-**	defaults
-***		name encoding (bolted)
-***		destdir (can be set at config time with +destdir=/foo)
-* make (optional)
-* make install
-* make clean (optional)
+
+
+			GNU Development Tools
+		       A Cygnus Support Release
+
+
+This is the procedure for installing the a29k cross compiler on a
+sun4.
+
+
+0. Load the tape.
+
+	If you haven't already done so, load the tape with:
+
+		tar xvf /dev/rst8
+
+	It doesn't really matter where, so long as the hard disk space
+	is available.  The source for the tools will be loaded into
+	./devo.
+
+	The installed portion of the tools will take about 4 Mbytes of
+	disk space.  Simply loading the source from tape will require
+	about 32 Mbytes.  Loading the source from tape, building, and
+	installing the tools will need about 46 Mbytes.
+
+	Once loaded:
+
+		cd devo
+
+1. Create destdir.
+
+	The default location for all installed files and programs is
+	/usr/local.  We refer to this directory as $(destdir).  You
+	can change $(destdir) only at configuration time.  This is
+	because some tools have hard coded pathnames.
+
+	If you change destdir after the tools are built, you will need
+	to "make clean" and then rebuild.  If you don't understand
+	this, you should probably be using the defaults for now.
+
+	User visible programs are installed in $(destdir)/bin.  All
+	other files and programs are installed in $(destdir)/lib/gcc.
+
+	If $(destdir) does not already exist, create it now.
+
+2. Configure the source.
+
+	If you use the default $(destdir):
+
+		configure +host=sun4 a29k
+
+	Otherwise:
+
+		configure +host=sun4 a29k +destdir=yourdestdir
+
+	where "yourdestdir" should be the name of the $(destdir) that
+	you've chosen.
+
+3. Build and install the tools.
+
+	Use:
+		make install
+
+	This will take about 20 minutes on an otherwise unloaded
+	SparcStation 2 with a quick, sync, SCSI hard disk.
+
+That's it.  You're done.  If you don't plan to hack these sources in
+the near future, you'll probably want to also:
+
+4. Remove intermediate object files.
+
+		make clean
+
+	and perhaps even:
+
+		cd .. ; rm -rf devo
+
+
+To use these tools, you will probably want to add $(destdir)/bin to
+your path.  The tools are named with the standard UNIX(tm) names with
+"-a29k" appended so as to avoid conflict with native development
+tools.  That is, nm-a29k, etc.
+
+For more information on usage, please refer to {LOTS OF VERY PRETTY
+HARD COPY} (sic) that you should have received with your tape.