From: Matt Flax Date: Thu, 3 Jan 2019 11:00:36 +0000 (+1100) Subject: Fix rasberry Pi 64bit firmware overlay inclusion X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=51d6d6c580432435f2b2f95ed35e22a5ecbe9dcb;p=buildroot.git Fix rasberry Pi 64bit firmware overlay inclusion This patch enables the inclusion of the Pi's overlays. Previously the overlays were not included in the genimage configuration. This patch ensures overlays are included in the sdcard (when enabled) by defaulting to the inclusion of an empty output/images/rpi-firmware/overlays directory in genimage cfg. The Pi's overlays are built with the following config variables: BR2_PACKAGE_RPI_FIRMWARE=y BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS=y BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS=y BR2_LINUX_KERNEL_IMAGE_TARGET_CUSTOM=y BR2_LINUX_KERNEL_IMAGE_NAME="Image" BR2_LINUX_KERNEL_IMAGE_TARGET_NAME="Image modules dtbs" After building, the dtbo files are present in the output/images/rpi-firmware/overlays directory but not added to the sdcard because they are missing from the genimage cfg file. Signed-off-by: Matt Flax Reviewed-by: "Yann E. MORIN" [Arnout: fix indentation, and add comment explaining why an empty directory is created.] Signed-off-by: Arnout Vandecappelle (Essensium/Mind) --- diff --git a/board/raspberrypi/genimage-raspberrypi3-64.cfg b/board/raspberrypi/genimage-raspberrypi3-64.cfg index 0d0ca750a7..af1d17cde7 100644 --- a/board/raspberrypi/genimage-raspberrypi3-64.cfg +++ b/board/raspberrypi/genimage-raspberrypi3-64.cfg @@ -9,6 +9,7 @@ image boot.vfat { "rpi-firmware/config.txt", "rpi-firmware/fixup.dat", "rpi-firmware/start.elf", + "rpi-firmware/overlays", "Image" } } diff --git a/package/rpi-firmware/rpi-firmware.mk b/package/rpi-firmware/rpi-firmware.mk index e41b3442e6..630bc670ca 100644 --- a/package/rpi-firmware/rpi-firmware.mk +++ b/package/rpi-firmware/rpi-firmware.mk @@ -24,6 +24,12 @@ define RPI_FIRMWARE_INSTALL_DTB_OVERLAYS $(INSTALL) -D -m 0644 $${ovldtb} $(BINARIES_DIR)/rpi-firmware/overlays/$${ovldtb##*/} || exit 1; \ done endef +else +# Still create the directory, so a genimage.cfg can include it independently of +# whether _INSTALL_DTB_OVERLAYS is selected or not. +define RPI_FIRMWARE_INSTALL_DTB_OVERLAYS + $(INSTALL) -d $(BINARIES_DIR)/rpi-firmware/overlays +endef endif ifeq ($(BR2_PACKAGE_RPI_FIRMWARE_INSTALL_VCDBG),y)