From: Sergey Matyukevich Date: Sun, 11 Feb 2018 15:56:49 +0000 (+0300) Subject: configs/orange-pi-zero-plus2: enable WiFi support X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=53ae154c77228b36d1d9ae0cad057de8879ad2bc;p=buildroot.git configs/orange-pi-zero-plus2: enable WiFi support Orange-Pi Zero Plus2 board has AP6212 WiFi/BT combo, but does not have ethernet port. So it makes sense to enable wireless networking by default: - add DTS patch enabling AP6212 WiFi/BT combo support -- this patch is on its way to mainline Linux v4.16 - enable WiFi support in kernel config - enable Broadcom brcmfmac kernel driver in kernel config - add Broadcom wireless firmware package to image - add basic wireless tools to image - add mdev to image to enable module autoloading - add rootfs overlay with proper NVRAM file for on-board AP6212 chip Signed-off-by: Sergey Matyukevich Signed-off-by: Thomas Petazzoni --- diff --git a/board/orangepi/orangepi-zero-plus2/linux-extras.config b/board/orangepi/orangepi-zero-plus2/linux-extras.config new file mode 100644 index 0000000000..52b4b4b29e --- /dev/null +++ b/board/orangepi/orangepi-zero-plus2/linux-extras.config @@ -0,0 +1,10 @@ +# wireless core +CONFIG_WIRELESS=y +CONFIG_CFG80211=y +CONFIG_MAC80211=y +CONFIG_CFG80211_WEXT=y + +# wireless drivers +CONFIG_WLAN=y +CONFIG_WLAN_VENDOR_BROADCOM=y +CONFIG_BRCMFMAC=m diff --git a/board/orangepi/orangepi-zero-plus2/patches/linux/linux-0001-arm64-dts-orange-pi-zero-plus2-enable-ap6212.patch b/board/orangepi/orangepi-zero-plus2/patches/linux/linux-0001-arm64-dts-orange-pi-zero-plus2-enable-ap6212.patch new file mode 100644 index 0000000000..282e2171f2 --- /dev/null +++ b/board/orangepi/orangepi-zero-plus2/patches/linux/linux-0001-arm64-dts-orange-pi-zero-plus2-enable-ap6212.patch @@ -0,0 +1,73 @@ +From: Sergey Matyukevich +Date: Sun, 11 Feb 2018 16:21:43 +0300 +Subject: [PATCH] arm64: dts: orange-pi-zero-plus2: enable AP6212a WiFi/BT combo + +Enable AP6212a WiFi/BT combo chip on orange-pi-zero-plus2 board: +- WiFi SDIO interface is connected to MMC1 +- WiFi REG_ON pin connected to gpio PA9: attach to mmc-pwrseq +- WiFi HOST_WAKE pin connected to gpio PL7 +- BT is connected to UART1 + +Signed-off-by: Sergey Matyukevich +Signed-off-by: Maxime Ripard +--- + .../allwinner/sun50i-h5-orangepi-zero-plus2.dts | 32 ++++++++++++++++++++++ + 1 file changed, 32 insertions(+) + +diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts +index a42fd79a62a3..d415b7b67cce 100644 +--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts ++++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts +@@ -64,6 +64,13 @@ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; ++ ++ wifi_pwrseq: wifi_pwrseq { ++ compatible = "mmc-pwrseq-simple"; ++ pinctrl-names = "default"; ++ reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */ ++ post-power-on-delay-ms = <200>; ++ }; + }; + + &mmc0 { +@@ -75,6 +82,25 @@ + status = "okay"; + }; + ++&mmc1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc1_pins_a>; ++ vmmc-supply = <®_vcc3v3>; ++ vqmmc-supply = <®_vcc3v3>; ++ mmc-pwrseq = <&wifi_pwrseq>; ++ bus-width = <4>; ++ non-removable; ++ status = "okay"; ++ ++ brcmf: wifi@1 { ++ reg = <1>; ++ compatible = "brcm,bcm4329-fmac"; ++ interrupt-parent = <&r_pio>; ++ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */ ++ interrupt-names = "host-wake"; ++ }; ++}; ++ + &mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; +@@ -90,3 +116,9 @@ + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; ++ status = "okay"; ++}; +-- +2.16.1 + diff --git a/board/orangepi/orangepi-zero-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.txt b/board/orangepi/orangepi-zero-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.txt new file mode 100644 index 0000000000..8f0bf69063 --- /dev/null +++ b/board/orangepi/orangepi-zero-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.txt @@ -0,0 +1,54 @@ +#AP6212_NVRAM_V1.0_20140603 +# 2.4 GHz, 20 MHz BW mode + +# The following parameter values are just placeholders, need to be updated. +manfid=0x2d0 +prodid=0x0726 +vendid=0x14e4 +devid=0x43e2 +boardtype=0x0726 +boardrev=0x1101 +boardnum=22 +macaddr=00:90:4c:c5:12:38 +sromrev=11 +boardflags=0x00404201 +xtalfreq=26000 +nocrc=1 +ag0=255 +aa2g=1 +ccode=ALL + +pa0itssit=0x20 +extpagain2g=0 + +#PA parameters for 2.4GHz, measured at CHIP OUTPUT +pa2ga0=-168,7161,-820 +AvVmid_c0=0x0,0xc8 +cckpwroffset0=5 + +# PPR params +maxp2ga0=90 +txpwrbckof=6 +cckbw202gpo=0x5555 +legofdmbw202gpo=0x77777777 +mcsbw202gpo=0xaaaaaaaa + +# OFDM IIR : +ofdmdigfilttype=7 +# PAPD mode: +papdmode=2 + +il0macaddr=00:90:4c:c5:12:38 +wl0id=0x431b + +#OOB parameters +hostwake=0x40 +hostrdy=0x41 +usbrdy=0x03 +usbrdydelay=100 +deadman_to=0xffffffff +# muxenab: 0x1 for UART enable, 0x10 for Host awake +muxenab=0x10 +# CLDO PWM voltage settings - 0x4 - 1.1 volt +#cldo_pwm=0x4 + diff --git a/configs/orangepi_zero_plus2_defconfig b/configs/orangepi_zero_plus2_defconfig index 7906dba5c7..5ca6cf0fe2 100644 --- a/configs/orangepi_zero_plus2_defconfig +++ b/configs/orangepi_zero_plus2_defconfig @@ -2,8 +2,10 @@ BR2_aarch64=y BR2_cortex_a53=y BR2_ARM_FPU_VFPV4=y -# Linux headers same as kernel, a 4.15 series BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_15=y +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y +BR2_GLOBAL_PATCH_DIR="board/orangepi/orangepi-zero-plus2/patches" +BR2_ROOTFS_OVERLAY="board/orangepi/orangepi-zero-plus2/rootfs_overlay" # Firmware BR2_TARGET_ARM_TRUSTED_FIRMWARE=y @@ -35,6 +37,19 @@ BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.15.2" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun50i-h5-orangepi-zero-plus2" +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/orangepi/orangepi-zero-plus2/linux-extras.config" + +# wireless firmware +BR2_PACKAGE_LINUX_FIRMWARE=y +BR2_PACKAGE_LINUX_FIRMWARE_BRCM_BCM43XXX=y + +# wireless tools +BR2_PACKAGE_IW=y +BR2_PACKAGE_WIRELESS_TOOLS=y +BR2_PACKAGE_WIRELESS_TOOLS_LIB=y +BR2_PACKAGE_WPA_SUPPLICANT=y +BR2_PACKAGE_WPA_SUPPLICANT_NL80211=y +BR2_PACKAGE_WPA_SUPPLICANT_CLI=y # Filesystem BR2_TARGET_GENERIC_ISSUE="Welcome to Orangepi Zero Plus2"