From: Andrew Cagney <cagney@redhat.com>
Date: Thu, 30 Sep 2004 16:46:40 +0000 (+0000)
Subject: Really delete inf_ptrace_xfer_memory!
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=56157dbefc9f44aa294e92b773224141aeef6237;p=binutils-gdb.git

Really delete inf_ptrace_xfer_memory!
---

diff --git a/gdb/inf-ptrace.c b/gdb/inf-ptrace.c
index 8754af7c50c..4a37d394d63 100644
--- a/gdb/inf-ptrace.c
+++ b/gdb/inf-ptrace.c
@@ -95,145 +95,6 @@ inf_ptrace_resume (ptid_t ptid, int step, enum target_signal signal)
     perror_with_name ("ptrace");
 }
 
-/* Set an upper limit on alloca.  */
-#define GDB_MAX_ALLOCA 0x1000
-
-/* NOTE! I tried using PTRACE_READDATA, etc., to read and write memory
-   in the NEW_SUN_PTRACE case.  It ought to be straightforward.  But
-   it appears that writing did not write the data that I specified.  I
-   cannot understand where it got the data that it actually did
-   write.  */
-
-/* Copy LEN bytes to or from inferior's memory starting at MEMADDR to
-   debugger memory starting at MYADDR.  Copy to inferior if WRITE is
-   nonzero.  TARGET is ignored.
-
-   Returns the length copied, which is either the LEN argument or
-   zero.  This xfer function does not do partial moves, since
-   ptrace_ops_hack doesn't allow memory operations to cross below us in the
-   target stack anyway.  */
-
-int
-inf_ptrace_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write,
-			struct mem_attrib *attrib, struct target_ops *target)
-{
-  int i;
-  /* Round starting address down to longword boundary.  */
-  CORE_ADDR addr = memaddr & -(CORE_ADDR) sizeof (PTRACE_TYPE_RET);
-  /* Round ending address up; get number of longwords that makes.  */
-  int count = ((((memaddr + len) - addr) + sizeof (PTRACE_TYPE_RET) - 1)
-	       / sizeof (PTRACE_TYPE_RET));
-  int alloc = count * sizeof (PTRACE_TYPE_RET);
-  PTRACE_TYPE_RET *buffer;
-  struct cleanup *old_chain = NULL;
-
-#ifdef PT_IO
-  /* OpenBSD 3.1, NetBSD 1.6 and FreeBSD 5.0 have a new PT_IO request
-     that promises to be much more efficient in reading and writing
-     data in the traced process's address space.  */
-
-  {
-    struct ptrace_io_desc piod;
-
-    /* NOTE: We assume that there are no distinct address spaces for
-       instruction and data.  */
-    piod.piod_op = write ? PIOD_WRITE_D : PIOD_READ_D;
-    piod.piod_offs = (void *) memaddr;
-    piod.piod_addr = myaddr;
-    piod.piod_len = len;
-
-    if (ptrace (PT_IO, PIDGET (inferior_ptid), (caddr_t) &piod, 0) == -1)
-      {
-	/* If the PT_IO request is somehow not supported, fallback on
-	   using PT_WRITE_D/PT_READ_D.  Otherwise we will return zero
-	   to indicate failure.  */
-	if (errno != EINVAL)
-	  return 0;
-      }
-    else
-      {
-	/* Return the actual number of bytes read or written.  */
-	return piod.piod_len;
-      }
-  }
-#endif
-
-  /* Allocate buffer of that many longwords.  */
-  if (len < GDB_MAX_ALLOCA)
-    {
-      buffer = (PTRACE_TYPE_RET *) alloca (alloc);
-    }
-  else
-    {
-      buffer = (PTRACE_TYPE_RET *) xmalloc (alloc);
-      old_chain = make_cleanup (xfree, buffer);
-    }
-
-  if (write)
-    {
-      /* Fill start and end extra bytes of buffer with existing memory
-         data.  */
-      if (addr != memaddr || len < (int) sizeof (PTRACE_TYPE_RET))
-	{
-	  /* Need part of initial word -- fetch it.  */
-	  buffer[0] = ptrace (PT_READ_I, PIDGET (inferior_ptid),
-			      (PTRACE_TYPE_ARG3) addr, 0);
-	}
-
-      if (count > 1)		/* FIXME, avoid if even boundary.  */
-	{
-	  buffer[count - 1] =
-	    ptrace (PT_READ_I, PIDGET (inferior_ptid),
-		    ((PTRACE_TYPE_ARG3)
-		     (addr + (count - 1) * sizeof (PTRACE_TYPE_RET))), 0);
-	}
-
-      /* Copy data to be written over corresponding part of buffer.  */
-      memcpy ((char *) buffer + (memaddr & (sizeof (PTRACE_TYPE_RET) - 1)),
-	      myaddr, len);
-
-      /* Write the entire buffer.  */
-      for (i = 0; i < count; i++, addr += sizeof (PTRACE_TYPE_RET))
-	{
-	  errno = 0;
-	  ptrace (PT_WRITE_D, PIDGET (inferior_ptid),
-		  (PTRACE_TYPE_ARG3) addr, buffer[i]);
-	  if (errno)
-	    {
-	      /* Using the appropriate one (I or D) is necessary for
-	         Gould NP1, at least.  */
-	      errno = 0;
-	      ptrace (PT_WRITE_I, PIDGET (inferior_ptid),
-		      (PTRACE_TYPE_ARG3) addr, buffer[i]);
-	    }
-	  if (errno)
-	    return 0;
-	}
-    }
-  else
-    {
-      /* Read all the longwords.  */
-      for (i = 0; i < count; i++, addr += sizeof (PTRACE_TYPE_RET))
-	{
-	  errno = 0;
-	  buffer[i] = ptrace (PT_READ_I, PIDGET (inferior_ptid),
-			      (PTRACE_TYPE_ARG3) addr, 0);
-	  if (errno)
-	    return 0;
-	  QUIT;
-	}
-
-      /* Copy appropriate bytes out of the buffer.  */
-      memcpy (myaddr,
-	      (char *) buffer + (memaddr & (sizeof (PTRACE_TYPE_RET) - 1)),
-	      len);
-    }
-
-  if (old_chain != NULL)
-    do_cleanups (old_chain);
-  return len;
-}
-
 /* Wait for child to do something.  Return pid of child, or -1 in case
    of error; store status through argument pointer OURSTATUS.  */