From: Luke Kenneth Casson Leighton <lkcl@lkcl.net>
Date: Wed, 20 Jun 2018 07:35:20 +0000 (+0100)
Subject: alter slide order
X-Git-Tag: convert-csv-opcode-to-binary~5157
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=567209107e237a4177975505b130fc79c9cc3756;p=libreriscv.git

alter slide order
---

diff --git a/pinmux/pinmux_chennai_2018.tex b/pinmux/pinmux_chennai_2018.tex
index e0a781c83..8dbcacc9a 100644
--- a/pinmux/pinmux_chennai_2018.tex
+++ b/pinmux/pinmux_chennai_2018.tex
@@ -233,6 +233,14 @@
 }
 
 
+\frame{\frametitle{GPIO (only): Simplified I/O pad Diagram (FN only)}
+ \begin{center}
+  \includegraphics[height=2.5in]{reg_gpio_pinblock.jpg}\\
+  {\bf 3 wires: IN, OUT, OUTEN (also = !INEN) }
+ \end{center}
+}
+
+
 \frame{\frametitle{In/Out muxing, direction control: GPIO just a FN}
  \begin{center}
   \includegraphics[height=2.5in]{reg_gpio_fn_ctrl.jpg}\\
@@ -249,14 +257,6 @@
 }
 
 
-\frame{\frametitle{GPIO (only): Simplified I/O pad Diagram (FN only)}
- \begin{center}
-  \includegraphics[height=2.5in]{reg_gpio_pinblock.jpg}\\
-  {\bf 3 wires: IN, OUT, OUTEN (also = !INEN) }
- \end{center}
-}
-
-
 \frame{\frametitle{Output (and OUTEN) Wiring. 2 pins, 2 GPIO, 2 Fns}
  \begin{center}
   \includegraphics[height=2.5in]{reg_gpio_out_wiring.jpg}\\