From: Eric Andersen Date: Sat, 31 Jan 2004 08:33:26 +0000 (-0000) Subject: Update buildroot per the new snapshot situation with busybox. X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=5684054ebba9d11c67f2b3cc30c8e4d58fcc19d9;p=buildroot.git Update buildroot per the new snapshot situation with busybox. The old busybox 0.60.x series is no longer used/supported. -Erik --- diff --git a/make/busybox.mk b/make/busybox.mk index 09eef6d1dd..8cc6311677 100644 --- a/make/busybox.mk +++ b/make/busybox.mk @@ -7,17 +7,15 @@ ifeq ($(USE_BUSYBOX_SNAPSHOT),true) # Be aware that this changes daily.... BUSYBOX_DIR:=$(BUILD_DIR)/busybox -BUSYBOX_SOURCE=busybox-unstable.tar.bz2 +BUSYBOX_SOURCE=busybox-snapshot.tar.bz2 BUSYBOX_SITE:=http://www.busybox.net/downloads/snapshots -BUSYBOX_UNZIP=bzcat -BUSYBOX_CONFIG:=$(SOURCE_DIR)/busybox.config else -BUSYBOX_DIR:=$(BUILD_DIR)/busybox-0.60.5 -BUSYBOX_SOURCE:=busybox-0.60.5.tar.bz2 +BUSYBOX_DIR:=$(BUILD_DIR)/busybox-1.00-pre6 +BUSYBOX_SOURCE:=busybox-1.00-pre6.tar.bz2 BUSYBOX_SITE:=http://www.busybox.net/downloads -BUSYBOX_UNZIP=bzcat -BUSYBOX_CONFIG:=$(SOURCE_DIR)/busybox.Config.h endif +BUSYBOX_UNZIP=bzcat +BUSYBOX_CONFIG:=$(SOURCE_DIR)/busybox.config $(DL_DIR)/$(BUSYBOX_SOURCE): $(WGET) -P $(DL_DIR) $(BUSYBOX_SITE)/$(BUSYBOX_SOURCE) @@ -26,7 +24,6 @@ busybox-source: $(DL_DIR)/$(BUSYBOX_SOURCE) $(BUSYBOX_CONFIG) $(BUSYBOX_DIR)/.configured: $(DL_DIR)/$(BUSYBOX_SOURCE) $(BUSYBOX_CONFIG) $(BUSYBOX_UNZIP) $(DL_DIR)/$(BUSYBOX_SOURCE) | tar -C $(BUILD_DIR) -xvf - -ifeq ($(USE_BUSYBOX_SNAPSHOT),true) cp $(BUSYBOX_CONFIG) $(BUSYBOX_DIR)/.config $(SED) "s,^CROSS.*,CROSS=$(TARGET_CROSS)\n\ PREFIX=$(TARGET_DIR),;" $(BUSYBOX_DIR)/Rules.mak @@ -36,14 +33,6 @@ else $(SED) "s/^.*CONFIG_LFS.*/CONFIG_LFS=n/;" $(BUSYBOX_DIR)/.config endif $(MAKE) CC=$(TARGET_CC) CROSS="$(TARGET_CROSS)" -C $(BUSYBOX_DIR) oldconfig -else # Not using snapshot - cp $(BUSYBOX_CONFIG) $(BUSYBOX_DIR)/Config.h - $(SED) "s,^CROSS.*,CROSS=$(TARGET_CROSS),;" $(BUSYBOX_DIR)/Makefile - $(SED) "s,^PREFIX.*,PREFIX=$(TARGET_DIR),;" $(BUSYBOX_DIR)/Makefile -ifeq ($(strip $(BUILD_WITH_LARGEFILE)),true) - $(SED) "s/^DOLFS.*/DOLFS=true/;" $(BUSYBOX_DIR)/Makefile -endif -endif touch $(BUSYBOX_DIR)/.configured busybox-unpack: $(BUSYBOX_DIR)/.configured diff --git a/sources/busybox.Config.h b/sources/busybox.Config.h deleted file mode 100644 index 48bb0e0003..0000000000 --- a/sources/busybox.Config.h +++ /dev/null @@ -1,495 +0,0 @@ -/* vi: set sw=4 ts=4: */ -// This file defines the feature set to be compiled into busybox. -// When you turn things off here, they won't be compiled in at all. -// -//// This file is parsed by sed. You MUST use single line comments. -// i.e., //#define BB_BLAH -// -// -// BusyBox Applications -//#define BB_ADJTIMEX -#define BB_AR -#define BB_ASH -#define BB_BASENAME -#define BB_CAT -#define BB_CHGRP -#define BB_CHMOD -#define BB_CHOWN -#define BB_CHROOT -#define BB_CHVT -#define BB_CLEAR -#define BB_CMP -#define BB_CP -#define BB_CPIO -#define BB_CUT -#define BB_DATE -#define BB_DC -#define BB_DD -#define BB_DEALLOCVT -#define BB_DF -#define BB_DIRNAME -#define BB_DMESG -//#define BB_DOS2UNIX -//#define BB_DPKG -//#define BB_DPKG_DEB -//#define BB_DUTMP -#define BB_DU -//#define BB_DUMPKMAP -#define BB_ECHO -#define BB_ENV -#define BB_EXPR -#define BB_FBSET -//#define BB_FDFLUSH -#define BB_FIND -#define BB_FREE -#define BB_FREERAMDISK -//#define BB_FSCK_MINIX -//#define BB_GETOPT -#define BB_GREP -#define BB_GUNZIP -#define BB_GZIP -#define BB_HALT -#define BB_HEAD -#define BB_HOSTID -#define BB_HOSTNAME -//#define BB_HUSH -#define BB_ID -#define BB_IFCONFIG -#define BB_INIT -#define BB_INSMOD -#define BB_KILL -#define BB_KILLALL -#define BB_KLOGD -//#define BB_LASH -//#define BB_LENGTH -#define BB_LN -//#define BB_LOADACM -//#define BB_LOADFONT -//#define BB_LOADKMAP -#define BB_LOGGER -#define BB_LOGNAME -#define BB_LOSETUP -#define BB_LS -#define BB_LSMOD -//#define BB_MAKEDEVS -#define BB_MD5SUM -#define BB_MKDIR -//#define BB_MKFIFO -//#define BB_MKFS_MINIX -#define BB_MKNOD -#define BB_MKSWAP -#define BB_MKTEMP -#define BB_MODPROBE -#define BB_MORE -#define BB_MOUNT -//#define BB_MSH -//#define BB_MT -#define BB_MV -#define BB_NC -#define BB_NSLOOKUP -#define BB_PIDOF -#define BB_PING -#define BB_PIVOT_ROOT -#define BB_POWEROFF -#define BB_PRINTF -#define BB_PS -#define BB_PWD -#define BB_RDATE -#define BB_READLINK -#define BB_REBOOT -//#define BB_RENICE -#define BB_RESET -#define BB_RM -#define BB_RMDIR -#define BB_RMMOD -#define BB_ROUTE -//#define BB_RPM2CPIO -#define BB_SED -//#define BB_SETKEYCODES -#define BB_SLEEP -#define BB_SORT -#define BB_STRINGS -#define BB_STTY -#define BB_SWAPONOFF -#define BB_SYNC -#define BB_SYSLOGD -#define BB_TAIL -#define BB_TAR -#define BB_TEE -#define BB_TEST -#define BB_TELNET -#define BB_TFTP -#define BB_TIME -#define BB_TOP -#define BB_TOUCH -#define BB_TR -#define BB_TRACEROUTE -#define BB_TRUE_FALSE -#define BB_TTY -//#define BB_UNIX2DOS -#define BB_UUENCODE -#define BB_UUDECODE -#define BB_UMOUNT -#define BB_UNIQ -#define BB_UNAME -//#define BB_UPDATE -#define BB_UPTIME -#define BB_USLEEP -#define BB_VI -//#define BB_WATCHDOG -#define BB_WC -#define BB_WGET -#define BB_WHICH -#define BB_WHOAMI -#define BB_XARGS -#define BB_YES -// End of Applications List -// -// -// -// --------------------------------------------------------- -// This is where feature definitions go. Generally speaking, -// turning this stuff off makes things a bit smaller (and less -// pretty/useful). -// -// -// If you enabled one or more of the shells, you may select which one -// should be run when sh is invoked: -#define BB_FEATURE_SH_IS_ASH -//#define BB_FEATURE_SH_IS_HUSH -//#define BB_FEATURE_SH_IS_LASH -//#define BB_FEATURE_SH_IS_MSH -// -// BusyBox will, by default, malloc space for its buffers. This costs code -// size for the call to xmalloc. You can use the following feature to have -// them put on the stack. For some very small machines with limited stack -// space, this can be deadly. For most folks, this works just fine... -//#define BB_FEATURE_BUFFERS_GO_ON_STACK -// The third alternative for buffer allocation is to use BSS. This works -// beautifully for computers with a real MMU (and OS support), but wastes -// runtime RAM for uCLinux. This behavior was the only one available for -// BusyBox versions 0.48 and earlier. -//#define BB_FEATURE_BUFFERS_GO_IN_BSS -// -// Turn this on to use Erik's very cool devps, and devmtab kernel drivers, -// thereby eliminating the need for the /proc filesystem and thereby saving -// lots and lots memory for more important things. NOTE: If you enable this -// feature, you _must_ have patched the kernel to include the devps patch that -// is included in the busybox/kernel-patches directory. You will also need to -// create some device special files in /dev on your embedded system: -// mknod /dev/mtab c 10 22 -// mknod /dev/ps c 10 21 -// I emailed Linus and this patch will not be going into the stock kernel. -//#define BB_FEATURE_USE_DEVPS_PATCH -// -// show verbose usage messages -#define BB_FEATURE_VERBOSE_USAGE -// -// Use termios to manipulate the screen ('more' is prettier with this on) -#define BB_FEATURE_USE_TERMIOS -// -// calculate terminal & column widths (for more, ls, and telnet) -#define BB_FEATURE_AUTOWIDTH -// -// show username/groupnames for ls -#define BB_FEATURE_LS_USERNAME -// -// show file timestamps in ls -#define BB_FEATURE_LS_TIMESTAMPS -// -// enable ls -p and -F -#define BB_FEATURE_LS_FILETYPES -// -// sort the file names -#define BB_FEATURE_LS_SORTFILES -// -// enable ls -R -#define BB_FEATURE_LS_RECURSIVE -// -// enable ls -L -#define BB_FEATURE_LS_FOLLOWLINKS -// -// Use color to identify different file types -#define BB_FEATURE_LS_COLOR -// -// Disable for a smaller (but less functional) ping -#define BB_FEATURE_FANCY_PING -// -// Make init use a simplified /etc/inittab file (recommended). -#define BB_FEATURE_USE_INITTAB -// -//Enable init being called as /linuxrc -#define BB_FEATURE_LINUXRC -// -//Have init enable core dumping for child processes (for debugging only) -//#define BB_FEATURE_INIT_COREDUMPS -// -//Make sure nothing is printed to the console on boot -#define BB_FEATURE_EXTRA_QUIET -// -// enable syslogd -R remotehost -//#define BB_FEATURE_REMOTE_LOG -// -// enable syslogd -C -//#define BB_FEATURE_IPC_SYSLOG -// -//Disable for a simple tail implementation (2.34k vs 3k for the full one). -//Both provide 'tail -f', but this cuts out -c, -q, -s, and -v. -#define BB_FEATURE_FANCY_TAIL -// -// Enable support for loop devices in mount -#define BB_FEATURE_MOUNT_LOOP -// -// Enable support for a real /etc/mtab file instead of /proc/mounts -//#define BB_FEATURE_MTAB_SUPPORT -// -// Enable support for mounting remote NFS volumes. -// You may need to mount with "-o nolock" if you are -// not running a local portmapper daemon... -// -// If you are using uClibc, be sure that you've already compiled -// uClibc with INCLUDE_RPC=true (contained in the Config file) -//#define BB_FEATURE_NFSMOUNT -// -// Enable support forced filesystem unmounting -// (i.e., in case of an unreachable NFS system). -#define BB_FEATURE_MOUNT_FORCE -// -// Enable support for creation of tar files. -#define BB_FEATURE_TAR_CREATE -// -// Enable support for "--exclude" and "-X" for excluding files -#define BB_FEATURE_TAR_EXCLUDE -// -// Enable support for tar -z option (currently only works for inflating) -#define BB_FEATURE_TAR_GZIP -// -// Enable reverse sort -#define BB_FEATURE_SORT_REVERSE -// -// Enable uniqe sort -#define BB_FEATURE_SORT_UNIQUE -// -// Enable command line editing in the shell. -// Only relevant if a shell is enabled. On by default. -#define BB_FEATURE_COMMAND_EDITING -// -// Enable tab completion in the shell. This is now working quite nicely. -// This feature adds a bit over 4k. Only relevant if a shell is enabled. -#define BB_FEATURE_COMMAND_TAB_COMPLETION -// -// Attempts to match usernames in a ~-prefixed path -#define BB_FEATURE_COMMAND_USERNAME_COMPLETION -// -//Allow the shell to invoke all the compiled in BusyBox applets as if they -//were shell builtins. Nice for staticly linking an emergency rescue shell, -//among other things. Off by default. -// Only relevant if a shell is enabled. -//#define BB_FEATURE_SH_STANDALONE_SHELL -// -//When this is enabled, busybox shell applets can be called using full path -//names. This causes applets (i.e., most busybox commands) to override -//real commands on the filesystem. For example, if you run run /bin/cat, it -//will use BusyBox cat even if /bin/cat exists on the filesystem and is _not_ -//busybox. Some systems want this, others do not. Choose wisely. :-) This -//only has meaning when BB_FEATURE_SH_STANDALONE_SHELL is enabled. -// Only relevant if a shell is enabled. Off by default. -//#define BB_FEATURE_SH_APPLETS_ALWAYS_WIN -// -// Uncomment this option for a fancy shell prompt that includes the -// current username and hostname. On systems that don't have usernames -// or hostnames, this can look hideous. -// Only relevant if a shell is enabled. -#define BB_FEATURE_SH_FANCY_PROMPT -// -// Uncomment this option to disable job control. Job control lets you -// run jobs in the background (which completely useless for is all you -// are doing is running scripts). Disabing this is bad for interactive -// use, since when you hit ^C in an application, it will also kill the -// shell. This adds about 2.5k on an x86 system. -#define BB_FEATURE_ASH_JOB_CONTROL -// -//Turn on extra fbset options -//#define BB_FEATURE_FBSET_FANCY -// -//Turn on fbset readmode support -//#define BB_FEATURE_FBSET_READMODE -// -// Support insmod/lsmod/rmmod for post 2.1 kernels -#define BB_FEATURE_NEW_MODULE_INTERFACE -// -// Support insmod/lsmod/rmmod for pre 2.1 kernels -//#define BB_FEATURE_OLD_MODULE_INTERFACE -// -// Support module version checking -//#define BB_FEATURE_INSMOD_VERSION_CHECKING -// -// Support for uClinux memory usage optimization, which will load the image -// directly into the kernel memory. This divides memory requrements by three. -// If you are not running uClinux (i.e., your CPU has an MMU) leave this -// disabled... -//#define BB_FEATURE_INSMOD_LOADINKMEM -// -// Support for Minix filesystem, version 2 -//#define BB_FEATURE_MINIX2 -// -// Enable ifconfig status reporting output -- this feature adds 7k. -#define BB_FEATURE_IFCONFIG_STATUS -// -// Enable ifconfig slip-specific options "keepalive" and "outfill" -//#define BB_FEATURE_IFCONFIG_SLIP -// -// Enable ifconfig options "mem_start", "io_addr", and "irq". -#define BB_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ -// -// Enable ifconfig option "hw". Currently works for only with "ether". -#define BB_FEATURE_IFCONFIG_HW -// -// Allows "broadcast +" to set broadcast automatically based on hostaddr -// and netmask, at a cost of about 100 bytes of code (i386). -//#define BB_FEATURE_IFCONFIG_BROADCAST_PLUS -// -// Enable busybox --install [-s] -// to create links (or symlinks) for all the commands that are -// compiled into the binary. (needs /proc filesystem) -//#define BB_FEATURE_INSTALLER -// -// Enable a nifty progress meter in wget (adds just under 2k) -#define BB_FEATURE_WGET_STATUSBAR -// -// Enable HTTP authentication in wget -#define BB_FEATURE_WGET_AUTHENTICATION -// -// Clean up all memory before exiting -- usually not needed -// as the OS can clean up... Don't enable this unless you -// have a really good reason for cleaning things up manually. -//#define BB_FEATURE_CLEAN_UP -// -// Support for human readable output by ls, du, etc.(example 13k, 23M, 235G) -#define BB_FEATURE_HUMAN_READABLE -// -// Support for the find -type option. -#define BB_FEATURE_FIND_TYPE -// -// Support for the find -perm option. -#define BB_FEATURE_FIND_PERM -// -// Support for the find -mtime option. -#define BB_FEATURE_FIND_MTIME -// -//// Support for the find -newer option. -#define BB_FEATURE_FIND_NEWER -// -// Support for the -A -B and -C context flags in grep -#define BB_FEATURE_GREP_CONTEXT -// -// Support for the EGREP applet (alias to the grep applet) -//#define BB_FEATURE_GREP_EGREP_ALIAS -// -// Tell tftp what commands that should be supported. -#define BB_FEATURE_TFTP_PUT -#define BB_FEATURE_TFTP_GET -// -// features for vi -#define BB_FEATURE_VI_COLON // ":" colon commands, no "ex" mode -#define BB_FEATURE_VI_YANKMARK // Yank/Put commands and Mark cmds -#define BB_FEATURE_VI_SEARCH // search and replace cmds -#define BB_FEATURE_VI_USE_SIGNALS // catch signals -#define BB_FEATURE_VI_DOT_CMD // remember previous cmd and "." cmd -#define BB_FEATURE_VI_READONLY // vi -R and "view" mode -#define BB_FEATURE_VI_SETOPTS // set-able options, ai ic showmatch -#define BB_FEATURE_VI_SET // :set -#define BB_FEATURE_VI_WIN_RESIZE // handle window resize -// -// Enable a if you system have setuped locale -//#define BB_LOCALE_SUPPORT -// -// Support for TELNET to pass TERM type to remote host. Adds 384 bytes. -#define BB_FEATURE_TELNET_TTYPE -// -// Support for devfs. -//#define BB_FEATURE_DEVFS -// -// End of Features List -// -// -// -// -// -// -//--------------------------------------------------- -// Nothing beyond this point should ever be touched by -// mere mortals so leave this stuff alone. -// -#include -#if defined(__uClinux__) - #undef BB_ASH /* Not even a chance it will work */ - #undef BB_RPM2CPIO /* Uses gz_open(), which uses fork() */ - #undef BB_DPKG_DEB /* Uses gz_open(), which uses fork() */ - #undef BB_FEATURE_TAR_GZIP /* Uses fork() */ - #undef BB_UPDATE /* Uses daemon() */ -#endif -#if defined BB_ASH || defined BB_HUSH || defined BB_LASH || defined BB_MSH - #if defined BB_FEATURE_COMMAND_EDITING - #define BB_CMDEDIT - #else - #undef BB_FEATURE_COMMAND_EDITING - #undef BB_FEATURE_COMMAND_TAB_COMPLETION - #undef BB_FEATURE_COMMAND_USERNAME_COMPLETION - #undef BB_FEATURE_SH_FANCY_PROMPT - #endif -#else - #undef BB_FEATURE_SH_APPLETS_ALWAYS_WIN - #undef BB_FEATURE_SH_STANDALONE_SHELL - #undef BB_FEATURE_SH_FANCY_PROMPT -#endif -// -#if (defined BB_ASH || defined BB_HUSH || defined BB_MSH) && ! defined BB_TEST - #define BB_TEST -#endif -// -#ifdef BB_KILLALL - #ifndef BB_KILL - #define BB_KILL - #endif -#endif -// -#ifndef BB_INIT - #undef BB_FEATURE_LINUXRC -#endif -// -#if defined BB_MOUNT && defined BB_FEATURE_NFSMOUNT - #define BB_NFSMOUNT -#endif -// -#if defined BB_FEATURE_AUTOWIDTH - #ifndef BB_FEATURE_USE_TERMIOS - #define BB_FEATURE_USE_TERMIOS - #endif -#endif -// -#if defined BB_INSMOD || defined BB_LSMOD - #if ! defined BB_FEATURE_NEW_MODULE_INTERFACE && ! defined BB_FEATURE_OLD_MODULE_INTERFACE - #define BB_FEATURE_NEW_MODULE_INTERFACE - #endif -#endif -// -#ifdef BB_UNIX2DOS - #define BB_DOS2UNIX -#endif -// -#ifdef BB_SYSLOGD - #if defined BB_FEATURE_IPC_SYSLOG - #define BB_LOGREAD - #endif -#endif -// -#if defined BB_ASH && defined BB_FEATURE_SH_IS_ASH -# define shell_main ash_main -#elif defined BB_HUSH && defined BB_FEATURE_SH_IS_HUSH -# define shell_main hush_main -#elif defined BB_LASH && defined BB_FEATURE_SH_IS_LASH -# define shell_main lash_main -#elif defined BB_MSH && defined BB_FEATURE_SH_IS_MSH -# define shell_main msh_main -#endif diff --git a/sources/busybox.config b/sources/busybox.config index 7e2e7ebbf4..b5982c3e09 100644 --- a/sources/busybox.config +++ b/sources/busybox.config @@ -118,6 +118,7 @@ CONFIG_PWD=y # CONFIG_REALPATH is not set CONFIG_RM=y CONFIG_RMDIR=y +# CONFIG_SEQ is not set CONFIG_SHA1SUM=y CONFIG_SLEEP=y # CONFIG_FEATURE_FANCY_SLEEP is not set