From: Thomas De Schampheleire Date: Tue, 12 Aug 2014 20:20:06 +0000 (+0200) Subject: manual: high-level restructuring X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=569db405741dfee119ebb211722f588557b83542;p=buildroot.git manual: high-level restructuring The structure of the buildroot manual is not always clear. There is a large number of chapters, and some chapters seem to overlap. The distinction between general usage and developer information is not always clear. This patch restructures the manual into four large parts: - getting started - user guide - developer guide - appendix Except for the names of these parts, the section names are not yet changed. Content-wise there are no changes yet either. This will be handled in subsequent patches. In order to achieve the introduction of a new level 'parts' above 'chapters', the section indicators (=, ==, ===, ...) of several sections have to be moved one level down. Additionally, the leveloffset indication to asciidoc has to be removed. Finally, to maintain more or less the same level of detail in the table of contents, the toc.section.depth attribute is reduced as well. Note that for some sections, less detail is visible now. Signed-off-by: Thomas De Schampheleire Signed-off-by: Thomas Petazzoni --- diff --git a/docs/manual/advanced.txt b/docs/manual/advanced.txt index 05c5242453..b7bfc4923d 100644 --- a/docs/manual/advanced.txt +++ b/docs/manual/advanced.txt @@ -1,7 +1,7 @@ // -*- mode:doc; -*- // vim: set syntax=asciidoc: -== Advanced usage +=== Advanced usage include::using-buildroot-toolchain.txt[] diff --git a/docs/manual/appendix.txt b/docs/manual/appendix.txt index 3f95551fd6..87a20bd866 100644 --- a/docs/manual/appendix.txt +++ b/docs/manual/appendix.txt @@ -1,8 +1,6 @@ // -*- mode:doc; -*- // vim: set syntax=asciidoc: -= Appendix - include::makedev-syntax.txt[] include::makeusers-syntax.txt[] diff --git a/docs/manual/beyond-buildroot.txt b/docs/manual/beyond-buildroot.txt index 5b99613ee5..b8b1973c9f 100644 --- a/docs/manual/beyond-buildroot.txt +++ b/docs/manual/beyond-buildroot.txt @@ -1,11 +1,11 @@ // -*- mode:doc; -*- // vim: set syntax=asciidoc: -= Beyond Buildroot +== Beyond Buildroot -== Boot the generated images +=== Boot the generated images -=== NFS boot +==== NFS boot To achieve NFS-boot, enable _tar root filesystem_ in the _Filesystem images_ menu. @@ -21,7 +21,7 @@ Remember to add this path to +/etc/exports+. Then, you can execute a NFS-boot from your target. -== Chroot +=== Chroot If you want to chroot in a generated image, then there are few thing you should be aware of: diff --git a/docs/manual/ccache-support.txt b/docs/manual/ccache-support.txt index c6771bd1e4..992471dbf7 100644 --- a/docs/manual/ccache-support.txt +++ b/docs/manual/ccache-support.txt @@ -2,7 +2,7 @@ // vim: set syntax=asciidoc: [[ccache]] -=== Using +ccache+ in Buildroot +==== Using +ccache+ in Buildroot http://ccache.samba.org[ccache] is a compiler cache. It stores the object files resulting from each compilation process, and is able to diff --git a/docs/manual/contribute.txt b/docs/manual/contribute.txt index b7e89444b7..c8e819d690 100644 --- a/docs/manual/contribute.txt +++ b/docs/manual/contribute.txt @@ -1,7 +1,7 @@ // -*- mode:doc; -*- // vim: set syntax=asciidoc: -= Contributing to Buildroot +== Contributing to Buildroot There are many ways in which you can contribute to Buildroot: analyzing and fixing bugs, analyzing and fixing package build failures detected by @@ -22,7 +22,7 @@ source code tarball. Git is the easiest way to develop from and directly send your patches to the mailing list. Refer to xref:getting-buildroot[] for more information on obtaining a Buildroot git tree. -== Reproducing, analyzing and fixing bugs +=== Reproducing, analyzing and fixing bugs A first way of contributing is to have a look at the open bug reports in the https://bugs.busybox.net/buglist.cgi?product=buildroot[Buildroot bug @@ -31,7 +31,7 @@ help in reproducing, analyzing and fixing reported bugs is more than welcome. Don't hesitate to add a comment to bug reports reporting your findings, even if you don't yet see the full picture. -== Analyzing and fixing autobuild failures +=== Analyzing and fixing autobuild failures The Buildroot autobuilders are a set of build machines that continuously run Buildroot builds based on random configurations. This is done for @@ -76,7 +76,7 @@ basically two things that can be done: Fixes http://autobuild.buildroot.org/results/51000a9d4656afe9e0ea6f07b9f8ed374c2e4069 --------------------- -== Reviewing and testing patches +=== Reviewing and testing patches With the amount of patches sent to the mailing list each day, the maintainer has a very hard job to judge which patches are ready to apply @@ -142,7 +142,7 @@ Buildroot's Patchwork website can be used to pull in patches for testing purposes. Please see xref:apply-patches-patchwork[] for more information on using Buildroot's Patchwork website to apply patches. -== Work on items from the TODO list +=== Work on items from the TODO list If you want to contribute to Buildroot but don't know where to start, and you don't like any of the above topics, you can always work on items @@ -152,7 +152,7 @@ Do edit the wiki to indicate when you start working on an item, so we avoid duplicate efforts. [[submitting-patches]] -== Submitting patches +=== Submitting patches [NOTE] _Please, do not attach patches to bugs, send them to the mailing list @@ -196,7 +196,7 @@ If you do not use +git send-email+, make sure posted *patches are not line-wrapped*, otherwise they cannot easily be applied. In such a case, fix your e-mail client, or better yet, learn to use +git send-email+. -=== Cover letter +==== Cover letter If you want to present the whole patch set in a separate mail, add +--cover-letter+ to the +git format-patch+ command (see +man @@ -215,7 +215,7 @@ in the following cases: * whenever you feel it will help presenting your work, your choices, the review process, etc. -=== Patch revision changelog +==== Patch revision changelog When improvements are requested, the new revision of each commit should include a changelog of the modifications between each @@ -276,7 +276,7 @@ $ git format-patch --subject-prefix "PATCH v4" \ --------------------- [[reporting-bugs]] -== Reporting issues/bugs or getting help +=== Reporting issues/bugs or getting help Before reporting any issue, please check xref:mailing-list-subscribe[the mailing list archive] in case someone has diff --git a/docs/manual/developer-guide.txt b/docs/manual/developer-guide.txt index 8c2b96cc9f..cba05b3e73 100644 --- a/docs/manual/developer-guide.txt +++ b/docs/manual/developer-guide.txt @@ -1,8 +1,6 @@ // -*- mode:doc; -*- // vim: set syntax=asciidoc: -= Developer Guidelines - include::writing-rules.txt[] include::adding-packages.txt[] diff --git a/docs/manual/download-location.txt b/docs/manual/download-location.txt index 06a29a72a9..6a1bd67c1c 100644 --- a/docs/manual/download-location.txt +++ b/docs/manual/download-location.txt @@ -1,7 +1,7 @@ // -*- mode:doc; -*- // vim: set syntax=asciidoc: -=== Location of downloaded packages +==== Location of downloaded packages The various tarballs that are downloaded by Buildroot are all stored in +BR2_DL_DIR+, which by default is the +dl+ directory. If you want diff --git a/docs/manual/faq-troubleshooting.txt b/docs/manual/faq-troubleshooting.txt index 26c84604ec..7195234f08 100644 --- a/docs/manual/faq-troubleshooting.txt +++ b/docs/manual/faq-troubleshooting.txt @@ -1,10 +1,10 @@ // -*- mode:doc; -*- // vim: set syntax=asciidoc: -= Frequently Asked Questions & Troubleshooting +== Frequently Asked Questions & Troubleshooting [[faq-boot-hang-after-starting]] -== The boot hangs after 'Starting network...' +=== The boot hangs after 'Starting network...' If the boot process seems to hang after the following messages (messages not necessarily exactly similar, depending on the list of @@ -26,7 +26,7 @@ submenu. This will automatically tune the +/etc/inittab+ file of the generated system so that a shell starts on the correct serial port. [[faq-no-compiler-on-target]] -== Why is there no compiler on the target? +=== Why is there no compiler on the target? It has been decided that support for the _native compiler on the target_ would be stopped from the Buildroot-2012.11 release because: @@ -50,7 +50,7 @@ distribution_ and you should opt for something like: * ... [[faq-no-dev-files-on-target]] -== Why are there no development files on the target? +=== Why are there no development files on the target? Since there is no compiler available on the target (see xref:faq-no-compiler-on-target[]), it does not make sense to waste @@ -60,7 +60,7 @@ Therefore, those files are always removed from the target since the Buildroot-2012.11 release. [[faq-no-doc-on-target]] -== Why is there no documentation on the target? +=== Why is there no documentation on the target? Because Buildroot mostly targets _small_ or _very small_ target hardware with limited resource onboard (CPU, ram, mass-storage), it @@ -71,7 +71,7 @@ is not suitable for your purpose, and you should look for a _real distribution_ (see: xref:faq-no-compiler-on-target[]). [[faq-why-not-visible-package]] -== Why are some packages not visible in the Buildroot config menu? +=== Why are some packages not visible in the Buildroot config menu? If a package exists in the Buildroot tree and does not appear in the config menu, this most likely means that some of the package's @@ -89,7 +89,7 @@ then you should certainly run a full rebuild (see xref:make-tips[] for more explanations). [[faq-why-not-use-target-as-chroot]] -== Why not use the target directory as a chroot directory? +=== Why not use the target directory as a chroot directory? There are plenty of reasons to *not* use the target directory a chroot one, among these: @@ -106,7 +106,7 @@ root, then use the tarball image generated in +images/+ and extract it as root. [[faq-no-binary-packages]] -== Why doesn't Buildroot generate binary packages (.deb, .ipkg...)? +=== Why doesn't Buildroot generate binary packages (.deb, .ipkg...)? One feature that is often discussed on the Buildroot list is the general topic of "package management". To summarize, the idea diff --git a/docs/manual/get-involved.txt b/docs/manual/get-involved.txt index 4be88df165..0630d04990 100644 --- a/docs/manual/get-involved.txt +++ b/docs/manual/get-involved.txt @@ -1,7 +1,7 @@ // -*- mode:doc; -*- // vim: set syntax=asciidoc: -= Getting involved +== Getting involved Like any open source project, Buildroot has different ways to share information in its community and outside. @@ -11,7 +11,7 @@ One piece of it is the document you are currently reading ;-). Each of those ways may interest you if you are looking for some help, want to understand Buildroot or contribute to the project. -== Mailing List +=== Mailing List Buildroot has a mailing list http://lists.busybox.net/pipermail/buildroot[] for discussion and @@ -19,7 +19,7 @@ development. [[mailing-list-subscribe]] -=== Subscribing to the mailing list +==== Subscribing to the mailing list You can subscribe by visiting http://lists.busybox.net/mailman/listinfo/buildroot[]. @@ -30,14 +30,14 @@ The list is also available through _Gmane_ http://gmane.org[], at +gmane.comp.lib.uclibc.buildroot+ http://dir.gmane.org/gmane.comp.lib.uclibc.buildroot[]. -=== Searching the List Archives +==== Searching the List Archives Please search the mailing list archives before asking questions on the mailing list, since there is a good chance someone else has asked the same question before. Checking the archives is a great way to avoid annoying everyone on the list with frequently asked questions... -== IRC +=== IRC The Buildroot IRC is irc://freenode.net/#buildroot[]. The channel +#buildroot+ is hosted on Freenode @@ -47,7 +47,7 @@ When asking for help on IRC, share relevant logs or pieces of code using a code sharing website. [[patchwork]] -== Patchwork +=== Patchwork Patchwork is a web-based patch tracking system designed to facilitate the contribution and management of contributions to an open-source @@ -66,7 +66,7 @@ The Buildroot patch management interface is available at http://patchwork.buildroot.org[]. [[apply-patches-patchwork]] -=== Applying Patches from Patchwork +==== Applying Patches from Patchwork The main use of Buildroot's Patchwork website for a developer is for pulling in patches into their local git repository for testing @@ -88,13 +88,13 @@ you can copy the +mbox+ link for the bundle and apply the bundle using the above commands. [[bugtracker]] -== Bugtracker +=== Bugtracker The Buildroot bugtracker is at https://bugs.busybox.net[]. To open a bug, see xref:reporting-bugs[]. -== Buildroot wikipage +=== Buildroot wikipage After the Buildroot developer day on February 3, 2012, a page dedicated to Buildroot has been created on @@ -105,17 +105,17 @@ This page is reachable at http://elinux.org/Buildroot[]. Currently, this page is mainly used as a _todo-list_. [[events]] -== Events +=== Events -=== Buildroot Developer Days aside ELC-E 2012 (November 3-4, 2012 - Barcelona) +==== Buildroot Developer Days aside ELC-E 2012 (November 3-4, 2012 - Barcelona) * Event page: http://elinux.org/Buildroot:DeveloperDaysELCE2012[] -=== Buildroot presentation at LSM 2012 (July 12-14, 2012 - Geneva) +==== Buildroot presentation at LSM 2012 (July 12-14, 2012 - Geneva) * Announcement: http://lists.busybox.net/pipermail/buildroot/2012-May/053845.html[] -=== Buildroot Developer Days aside FOSDEM 2012 (February 3, 2012 - Brussels) +==== Buildroot Developer Days aside FOSDEM 2012 (February 3, 2012 - Brussels) * Announcement & agenda thread: http://lists.busybox.net/pipermail/buildroot/2012-January/049340.html[] * Report: http://lists.busybox.net/pipermail/buildroot/2012-February/050371.html[] diff --git a/docs/manual/going-further.txt b/docs/manual/going-further.txt index ac1c071f25..e9ffcd20a0 100644 --- a/docs/manual/going-further.txt +++ b/docs/manual/going-further.txt @@ -1,7 +1,7 @@ // -*- mode:doc; -*- // vim: set syntax=asciidoc: -= Going further in Buildroot's innards +== Going further in Buildroot's innards include::how-buildroot-works.txt[] diff --git a/docs/manual/how-buildroot-works.txt b/docs/manual/how-buildroot-works.txt index 1204d1ecab..3c09fd93c0 100644 --- a/docs/manual/how-buildroot-works.txt +++ b/docs/manual/how-buildroot-works.txt @@ -1,7 +1,7 @@ // -*- mode:doc; -*- // vim: set syntax=asciidoc: -== How Buildroot works +=== How Buildroot works As mentioned above, Buildroot is basically a set of Makefiles that download, configure, and compile software with the correct options. It diff --git a/docs/manual/introduction.txt b/docs/manual/introduction.txt index 6a0b54b76d..476aa81edc 100644 --- a/docs/manual/introduction.txt +++ b/docs/manual/introduction.txt @@ -1,7 +1,7 @@ // -*- mode:doc; -*- // vim: set syntax=asciidoc: -= About Buildroot +== About Buildroot Buildroot is a tool that simplifies and automates the process of building a complete Linux system for an embedded system, using diff --git a/docs/manual/known-issues.txt b/docs/manual/known-issues.txt index 5eaded98c6..38ba941acd 100644 --- a/docs/manual/known-issues.txt +++ b/docs/manual/known-issues.txt @@ -1,7 +1,7 @@ // -*- mode:doc; -*- // vim: set syntax=asciidoc: -= Known issues +== Known issues * It is not possible to pass extra linker options via +BR2_TARGET_LDFLAGS+ if such options contain a +$+ sign. For example, the following is known diff --git a/docs/manual/legal-notice.txt b/docs/manual/legal-notice.txt index d4344b9fbe..7b17438189 100644 --- a/docs/manual/legal-notice.txt +++ b/docs/manual/legal-notice.txt @@ -3,9 +3,9 @@ [[legal-info]] -= Legal notice and licensing +== Legal notice and licensing -== Complying with open source licenses +=== Complying with open source licenses All of the end products of Buildroot (toolchain, root filesystem, kernel, bootloaders) contain open source software, released under various licenses. @@ -69,7 +69,7 @@ When you run +make legal-info+, Buildroot produces warnings in the +README+ file to inform you of relevant material that could not be saved. [[legal-info-list-licenses]] -== License abbreviations +=== License abbreviations Here is a list of the licenses that are most widely used by packages in Buildroot, with the name used in the manifest files: @@ -123,7 +123,7 @@ Buildroot, with the name used in the manifest files: http://apache.org/licenses/LICENSE-2.0.html[ Apache License, version 2.0]; -== Complying with the Buildroot license +=== Complying with the Buildroot license Buildroot itself is an open source software, released under the http://www.gnu.org/licenses/old-licenses/gpl-2.0.html[GNU General Public diff --git a/docs/manual/manual.mk b/docs/manual/manual.mk index 942bb35f36..8d401a21d7 100644 --- a/docs/manual/manual.mk +++ b/docs/manual/manual.mk @@ -84,8 +84,8 @@ endef # The variable _SOURCES defines the dependencies. ################################################################################ define GENDOC -$(call GENDOC_INNER,$(pkgname),xhtml,html,html,HTML,--xsltproc-opts "--stringparam toc.section.depth 2") -$(call GENDOC_INNER,$(pkgname),chunked,split-html,chunked,split HTML,--xsltproc-opts "--stringparam toc.section.depth 2") +$(call GENDOC_INNER,$(pkgname),xhtml,html,html,HTML,--xsltproc-opts "--stringparam toc.section.depth 1") +$(call GENDOC_INNER,$(pkgname),chunked,split-html,chunked,split HTML,--xsltproc-opts "--stringparam toc.section.depth 1") $(call GENDOC_INNER,$(pkgname),pdf,pdf,pdf,PDF,--dblatex-opts "-P latex.output.revhistory=0") $(call GENDOC_INNER,$(pkgname),text,text,text,text) $(call GENDOC_INNER,$(pkgname),epub,epub,epub,ePUB) diff --git a/docs/manual/manual.txt b/docs/manual/manual.txt index bf89af9ee5..6730e5376a 100644 --- a/docs/manual/manual.txt +++ b/docs/manual/manual.txt @@ -16,12 +16,14 @@ Copyright (C) 2004-2014 The Buildroot developers image::logo.png[] -:leveloffset: 1 += Getting started include::introduction.txt[] include::starting-up.txt[] += User guide + include::working-with.txt[] include::faq-troubleshooting.txt[] @@ -30,14 +32,18 @@ include::known-issues.txt[] include::going-further.txt[] -include::developer-guide.txt[] - include::legal-notice.txt[] include::beyond-buildroot.txt[] += Developer guide + +include::developer-guide.txt[] + include::get-involved.txt[] include::contribute.txt[] += Appendix + include::appendix.txt[] diff --git a/docs/manual/package-make-target.txt b/docs/manual/package-make-target.txt index 61fecb484c..25d3f44eae 100644 --- a/docs/manual/package-make-target.txt +++ b/docs/manual/package-make-target.txt @@ -3,7 +3,7 @@ [[pkg-build-steps]] -=== Package-specific _make_ targets +==== Package-specific _make_ targets Running +make + builds and installs that particular package and its dependencies. diff --git a/docs/manual/starting-up.txt b/docs/manual/starting-up.txt index 8cb3a3a8b6..aab1c85c69 100644 --- a/docs/manual/starting-up.txt +++ b/docs/manual/starting-up.txt @@ -1,8 +1,6 @@ // -*- mode:doc; -*- // vim: set syntax=asciidoc: -= Starting up - include::prerequisite.txt[] include::getting.txt[] diff --git a/docs/manual/using-buildroot-debugger.txt b/docs/manual/using-buildroot-debugger.txt index 962ecf7a63..b5063ca94c 100644 --- a/docs/manual/using-buildroot-debugger.txt +++ b/docs/manual/using-buildroot-debugger.txt @@ -1,7 +1,7 @@ // -*- mode:doc; -*- // vim: set syntax=asciidoc: -=== Using +gdb+ in Buildroot +==== Using +gdb+ in Buildroot Buildroot allows to do cross-debugging, where the debugger runs on the build machine and communicates with +gdbserver+ on the target to diff --git a/docs/manual/using-buildroot-development.txt b/docs/manual/using-buildroot-development.txt index e660e65e5f..a075416ba1 100644 --- a/docs/manual/using-buildroot-development.txt +++ b/docs/manual/using-buildroot-development.txt @@ -1,7 +1,7 @@ // -*- mode:doc; -*- // vim: set syntax=asciidoc: -=== Using Buildroot during development +==== Using Buildroot during development The normal operation of Buildroot is to download a tarball, extract it, configure, compile and install the software component found inside diff --git a/docs/manual/using-buildroot-toolchain.txt b/docs/manual/using-buildroot-toolchain.txt index 3e30cd73ca..3c87282a4f 100644 --- a/docs/manual/using-buildroot-toolchain.txt +++ b/docs/manual/using-buildroot-toolchain.txt @@ -1,7 +1,7 @@ // -*- mode:doc; -*- // vim: set syntax=asciidoc: -=== Using the generated toolchain outside Buildroot +==== Using the generated toolchain outside Buildroot You may want to compile, for your target, your own programs or other software that are not packaged in Buildroot. In order to do this you diff --git a/docs/manual/working-with.txt b/docs/manual/working-with.txt index 460eb5339a..7ad855d6ae 100644 --- a/docs/manual/working-with.txt +++ b/docs/manual/working-with.txt @@ -1,8 +1,6 @@ // -*- mode:doc; -*- // vim: set syntax=asciidoc: -= Working with Buildroot - This section explains how you can customize Buildroot to fit your needs.