From: Luke Kenneth Casson Leighton <lkcl@lkcl.net>
Date: Sun, 17 Jun 2018 14:41:09 +0000 (+0100)
Subject: add slides
X-Git-Tag: convert-csv-opcode-to-binary~5173
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=5b83e925e562c385e524a2f17394aa3efd0b4225;p=libreriscv.git

add slides
---

diff --git a/pinmux/pinmux_chennai_2018.tex b/pinmux/pinmux_chennai_2018.tex
index 2d5bf1787..82d3170aa 100644
--- a/pinmux/pinmux_chennai_2018.tex
+++ b/pinmux/pinmux_chennai_2018.tex
@@ -151,13 +151,13 @@
 
 \frame{\frametitle{Pin Configuration, input and output}
 
- In/out:
+ In/out: {\bf Note: these all require multiplexing }
  \begin{itemize}
    \item Output-Enable (aka Input disable): switches pad to In or Out
    \item Output (actually an input wire controlling pin's level, HI/LO)
    \item Input (actually an output wire set based on pin's driven level)
  \end{itemize}
- Characteristics:
+ Characteristics: {\bf Note: these do not require multiplexing }
  \begin{itemize}
    \item Output current level: 10mA / 20mA / 30mA / 40mA
    \item Input hysteresis: low / middle / high. Stops signal noise