From: gatecat <gatecat@ds0.me>
Date: Sat, 15 May 2021 13:23:22 +0000 (+0100)
Subject: intel_alm: Add IO buffer insertion
X-Git-Tag: yosys-0.10~207
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=5dba138c87762d4b5bb7b9348da372a92fab1cc0;p=yosys.git

intel_alm: Add IO buffer insertion

Signed-off-by: gatecat <gatecat@ds0.me>
---

diff --git a/techlibs/intel_alm/Makefile.inc b/techlibs/intel_alm/Makefile.inc
index da88762c4..614d5802c 100644
--- a/techlibs/intel_alm/Makefile.inc
+++ b/techlibs/intel_alm/Makefile.inc
@@ -13,6 +13,7 @@ $(eval $(call add_share_file,share/intel_alm/common,techlibs/intel_alm/common/df
 $(eval $(call add_share_file,share/intel_alm/common,techlibs/intel_alm/common/dsp_sim.v))
 $(eval $(call add_share_file,share/intel_alm/common,techlibs/intel_alm/common/dsp_map.v))
 $(eval $(call add_share_file,share/intel_alm/common,techlibs/intel_alm/common/mem_sim.v))
+$(eval $(call add_share_file,share/intel_alm/common,techlibs/intel_alm/common/misc_sim.v))
 
 $(eval $(call add_share_file,share/intel_alm/cyclonev,techlibs/intel_alm/cyclonev/cells_sim.v))
 
diff --git a/techlibs/intel_alm/common/megafunction_bb.v b/techlibs/intel_alm/common/megafunction_bb.v
index 874f293b1..aabcd4539 100644
--- a/techlibs/intel_alm/common/megafunction_bb.v
+++ b/techlibs/intel_alm/common/megafunction_bb.v
@@ -627,3 +627,38 @@ output [port_b_data_width-1:0] portbdataout;
 input clk0, portawe, portbre;
 
 endmodule
+
+(* blackbox *)
+module cyclone10gx_io_ibuf(i, ibar, dynamicterminationcontrol, o);
+
+parameter differential_mode ="false";
+parameter bus_hold = "false";
+parameter simulate_z_as = "Z";
+parameter lpm_type = "cyclone10gx_io_ibuf";
+
+(* iopad_external_pin *) input i;
+(* iopad_external_pin *) input ibar;
+input dynamicterminationcontrol;
+output o;
+
+endmodule
+
+(* blackbox *)
+module cyclone10gx_io_obuf(i, oe, dynamicterminationcontrol, seriesterminationcontrol, parallelterminationcontrol, devoe, o, obar);
+
+parameter open_drain_output = "false";
+parameter bus_hold = "false";
+parameter shift_series_termination_control = "false";
+parameter sim_dynamic_termination_control_is_connected = "false";
+parameter lpm_type = "cyclone10gx_io_obuf";
+
+input i;
+input oe;
+input devoe;
+input dynamicterminationcontrol;
+input [15:0] seriesterminationcontrol;
+input [15:0] parallelterminationcontrol;
+(* iopad_external_pin *) output o;
+(* iopad_external_pin *) output obar;
+
+endmodule
diff --git a/techlibs/intel_alm/common/misc_sim.v b/techlibs/intel_alm/common/misc_sim.v
new file mode 100644
index 000000000..e9494a8ee
--- /dev/null
+++ b/techlibs/intel_alm/common/misc_sim.v
@@ -0,0 +1,12 @@
+module MISTRAL_IB((* iopad_external_pin *)  input PAD, output O);
+	assign O = PAD;
+endmodule
+
+module MISTRAL_OB((* iopad_external_pin *)  output PAD, input I);
+	assign PAD = I;
+endmodule
+
+module MISTRAL_IO((* iopad_external_pin *)  inout PAD, input I, input OE, output O);
+	assign PAD = OE ? I : 1'bz;
+	assign O = PAD;
+endmodule
diff --git a/techlibs/intel_alm/common/quartus_rename.v b/techlibs/intel_alm/common/quartus_rename.v
index 3b4628675..964a094dd 100644
--- a/techlibs/intel_alm/common/quartus_rename.v
+++ b/techlibs/intel_alm/common/quartus_rename.v
@@ -2,11 +2,15 @@
 `define LCELL cyclonev_lcell_comb
 `define MAC cyclonev_mac
 `define MLAB cyclonev_mlab_cell
+`define IBUF cyclonev_io_ibuf
+`define OBUF cyclonev_io_obuf
 `endif
 `ifdef cyclone10gx
 `define LCELL cyclone10gx_lcell_comb
 `define MAC cyclone10gx_mac
 `define MLAB cyclone10gx_mlab_cell
+`define IBUF cyclone10gx_io_ibuf
+`define OBUF cyclone10gx_io_obuf
 `endif
 
 module __MISTRAL_VCC(output Q);
@@ -233,3 +237,43 @@ parameter B_SIGNED = 1;
 );
 
 endmodule
+
+module MISTRAL_IB(input PAD, output O);
+`IBUF #(
+    .bus_hold("false"),
+    .differential_mode("false")
+) _TECHMAP_REPLACE_ (
+    .i(PAD),
+    .o(O)
+);
+endmodule
+
+module MISTRAL_OB(output PAD, input I, OE);
+`OBUF #(
+    .bus_hold("false"),
+    .differential_mode("false")
+) _TECHMAP_REPLACE_ (
+    .i(I),
+    .o(PAD),
+    .oe(OE)
+);
+endmodule
+
+module MISTRAL_IO(output PAD, input I, OE, output O);
+`IBUF #(
+    .bus_hold("false"),
+    .differential_mode("false")
+) ibuf (
+    .i(PAD),
+    .o(O)
+);
+
+`OBUF #(
+    .bus_hold("false"),
+    .differential_mode("false")
+) obuf (
+    .i(I),
+    .o(PAD),
+    .oe(OE)
+);
+endmodule
diff --git a/techlibs/intel_alm/cyclonev/cells_sim.v b/techlibs/intel_alm/cyclonev/cells_sim.v
index 9b2a10e72..d0a9d9179 100644
--- a/techlibs/intel_alm/cyclonev/cells_sim.v
+++ b/techlibs/intel_alm/cyclonev/cells_sim.v
@@ -26,16 +26,34 @@ endmodule // GND
 
 /* Altera Cyclone V devices Input Buffer Primitive */
 module cyclonev_io_ibuf
-  (output o, input i, input ibar);
-   assign ibar = ibar;
+  (output o,
+   (* iopad_external_pin *) input i,
+   (* iopad_external_pin *) input ibar,
+   input dynamicterminationcontrol);
+
+   parameter differential_mode = "false";
+   parameter bus_hold = "false";
+   parameter simulate_z_as = "Z";
+   parameter lpm_type = "cyclonev_io_ibuf";
+
    assign o    = i;
 endmodule // cyclonev_io_ibuf
 
 /* Altera Cyclone V devices Output Buffer Primitive */
 module cyclonev_io_obuf
-  (output o, input i, input oe);
-   assign o  = i;
-   assign oe = oe;
+  ((* iopad_external_pin *) output o,
+   input i, oe, dynamicterminationcontrol,
+   input [15:0] seriesterminationcontrol, parallelterminationcontrol,
+   input devoe,
+   (* iopad_external_pin *) output obar);
+
+   parameter open_drain_output = "false";
+   parameter bus_hold = "false";
+   parameter shift_series_termination_control = "false";
+   parameter sim_dynamic_termination_control_is_connected = "false";
+   parameter lpm_type = "cyclonev_io_obuf";
+
+   assign o  = oe ? i : 1'bz;
 endmodule // cyclonev_io_obuf
 
 /* Altera Cyclone V LUT Primitive */
diff --git a/techlibs/intel_alm/synth_intel_alm.cc b/techlibs/intel_alm/synth_intel_alm.cc
index 11b6d0525..7c9e3d117 100644
--- a/techlibs/intel_alm/synth_intel_alm.cc
+++ b/techlibs/intel_alm/synth_intel_alm.cc
@@ -72,13 +72,16 @@ struct SynthIntelALMPass : public ScriptPass {
 		log("    -nodsp\n");
 		log("        do not map multipliers to MISTRAL_MUL cells\n");
 		log("\n");
+		log("    -noiopad\n");
+		log("        do not instantiate IO buffers\n");
+		log("\n");
 		log("The following commands are executed by this synthesis command:\n");
 		help_script();
 		log("\n");
 	}
 
 	string top_opt, family_opt, bram_type, vout_file;
-	bool flatten, quartus, nolutram, nobram, dff, nodsp;
+	bool flatten, quartus, nolutram, nobram, dff, nodsp, noiopad;
 
 	void clear_flags() override
 	{
@@ -92,6 +95,7 @@ struct SynthIntelALMPass : public ScriptPass {
 		nobram = false;
 		dff = false;
 		nodsp = false;
+		noiopad = false;
 	}
 
 	void execute(std::vector<std::string> args, RTLIL::Design *design) override
@@ -146,6 +150,10 @@ struct SynthIntelALMPass : public ScriptPass {
 				dff = true;
 				continue;
 			}
+			if (args[argidx] == "-noiopad") {
+				noiopad = true;
+				continue;
+			}
 			break;
 		}
 		extra_args(args, argidx, design);
@@ -183,8 +191,8 @@ struct SynthIntelALMPass : public ScriptPass {
 			run(stringf("read_verilog -specify -lib -D %s +/intel_alm/common/dff_sim.v", family_opt.c_str()));
 			run(stringf("read_verilog -specify -lib -D %s +/intel_alm/common/dsp_sim.v", family_opt.c_str()));
 			run(stringf("read_verilog -specify -lib -D %s +/intel_alm/common/mem_sim.v", family_opt.c_str()));
+			run(stringf("read_verilog -specify -lib -D %s +/intel_alm/common/misc_sim.v", family_opt.c_str()));
 			run(stringf("read_verilog -specify -lib -D %s -icells +/intel_alm/common/abc9_model.v", family_opt.c_str()));
-
 			// Misc and common cells
 			run("read_verilog -lib +/intel/common/altpll_bb.v");
 			run("read_verilog -lib +/intel_alm/common/megafunction_bb.v");
@@ -231,6 +239,8 @@ struct SynthIntelALMPass : public ScriptPass {
 				}
 			}
 			run("alumacc");
+			if (!noiopad)
+				run("iopadmap -bits -outpad MISTRAL_OB I:PAD -inpad MISTRAL_IB O:PAD -toutpad MISTRAL_IO OE:O:PAD -tinoutpad MISTRAL_IO OE:O:I:PAD A:top", "(unless -noiopad)");
 			run("techmap -map +/intel_alm/common/arith_alm_map.v -map +/intel_alm/common/dsp_map.v");
 			run("opt");
 			run("memory -nomap");
diff --git a/tests/arch/intel_alm/add_sub.ys b/tests/arch/intel_alm/add_sub.ys
index 0f552a27c..a189ada1b 100644
--- a/tests/arch/intel_alm/add_sub.ys
+++ b/tests/arch/intel_alm/add_sub.ys
@@ -1,6 +1,6 @@
 read_verilog ../common/add_sub.v
 hierarchy -top top
-equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclonev # equivalency check
+equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclonev -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd top # Constrain all select calls below inside the top module
 stat
@@ -10,7 +10,7 @@ select -assert-none t:MISTRAL_ALUT_ARITH %% t:* %D
 design -reset
 read_verilog ../common/add_sub.v
 hierarchy -top top
-equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclone10gx -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd top # Constrain all select calls below inside the top module
 stat
diff --git a/tests/arch/intel_alm/adffs.ys b/tests/arch/intel_alm/adffs.ys
index 4565dcc64..7013ebb73 100644
--- a/tests/arch/intel_alm/adffs.ys
+++ b/tests/arch/intel_alm/adffs.ys
@@ -3,7 +3,7 @@ design -save read
 
 hierarchy -top adff
 proc
-equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev # equivalency check
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm  -family cyclonev -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd adff # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_FF
@@ -15,7 +15,7 @@ select -assert-none t:MISTRAL_FF t:MISTRAL_NOT %% t:* %D
 design -load read
 hierarchy -top adff
 proc
-equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd adff # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_FF
@@ -27,7 +27,7 @@ select -assert-none t:MISTRAL_FF t:MISTRAL_NOT %% t:* %D
 design -load read
 hierarchy -top adffn
 proc
-equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev # equivalency check
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd adffn # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_FF
@@ -38,7 +38,7 @@ select -assert-none t:MISTRAL_FF %% t:* %D
 design -load read
 hierarchy -top adffn
 proc
-equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd adffn # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_FF
@@ -49,7 +49,7 @@ select -assert-none t:MISTRAL_FF %% t:* %D
 design -load read
 hierarchy -top dffs
 proc
-equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev # equivalency check
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd dffs # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_FF
@@ -61,7 +61,7 @@ select -assert-none t:MISTRAL_FF t:MISTRAL_ALUT2 %% t:* %D
 design -load read
 hierarchy -top dffs
 proc
-equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd dffs # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_FF
@@ -73,7 +73,7 @@ select -assert-none t:MISTRAL_FF t:MISTRAL_ALUT2 %% t:* %D
 design -load read
 hierarchy -top ndffnr
 proc
-equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev # equivalency check
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd ndffnr # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_FF
@@ -85,7 +85,7 @@ select -assert-none t:MISTRAL_FF t:MISTRAL_NOT %% t:* %D
 design -load read
 hierarchy -top ndffnr
 proc
-equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd ndffnr # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_FF
diff --git a/tests/arch/intel_alm/blockram.ys b/tests/arch/intel_alm/blockram.ys
index 610ae1ffd..b7c0e9564 100644
--- a/tests/arch/intel_alm/blockram.ys
+++ b/tests/arch/intel_alm/blockram.ys
@@ -1,6 +1,6 @@
 read_verilog ../common/blockram.v
 chparam -set ADDRESS_WIDTH 10 -set DATA_WIDTH 10 sync_ram_sdp
-synth_intel_alm -family cyclonev
+synth_intel_alm -family cyclonev -noiopad
 cd sync_ram_sdp
 select -assert-count 1 t:MISTRAL_M10K
 select -assert-none t:MISTRAL_M10K %% t:* %D
diff --git a/tests/arch/intel_alm/counter.ys b/tests/arch/intel_alm/counter.ys
index 50103fefc..98a9e360a 100644
--- a/tests/arch/intel_alm/counter.ys
+++ b/tests/arch/intel_alm/counter.ys
@@ -2,7 +2,7 @@ read_verilog ../common/counter.v
 hierarchy -top top
 proc
 flatten
-equiv_opt -async2sync -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev # equivalency check
+equiv_opt -async2sync -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd top # Constrain all select calls below inside the top module
 
@@ -17,7 +17,7 @@ read_verilog ../common/counter.v
 hierarchy -top top
 proc
 flatten
-equiv_opt -async2sync -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+equiv_opt -async2sync -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd top # Constrain all select calls below inside the top module
 
diff --git a/tests/arch/intel_alm/dffs.ys b/tests/arch/intel_alm/dffs.ys
index 9ae6c637a..811a5d82f 100644
--- a/tests/arch/intel_alm/dffs.ys
+++ b/tests/arch/intel_alm/dffs.ys
@@ -3,7 +3,7 @@ design -save read
 
 hierarchy -top dff
 proc
-equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev # equivalency check
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd dff # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_FF
@@ -13,7 +13,7 @@ select -assert-none t:MISTRAL_FF %% t:* %D
 design -load read
 hierarchy -top dff
 proc
-equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd dff # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_FF
@@ -24,7 +24,7 @@ select -assert-none t:MISTRAL_FF %% t:* %D
 design -load read
 hierarchy -top dffe
 proc
-equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev # equivalency check
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd dffe # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_FF
@@ -35,7 +35,7 @@ select -assert-none t:MISTRAL_FF %% t:* %D
 design -load read
 hierarchy -top dffe
 proc
-equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd dffe # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_FF
diff --git a/tests/arch/intel_alm/fsm.ys b/tests/arch/intel_alm/fsm.ys
index e54b5c21e..96c050bad 100644
--- a/tests/arch/intel_alm/fsm.ys
+++ b/tests/arch/intel_alm/fsm.ys
@@ -3,7 +3,7 @@ hierarchy -top fsm
 proc
 flatten
 
-equiv_opt -run :prove -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev
+equiv_opt -run :prove -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev -noiopad
 async2sync
 miter -equiv -make_assert -flatten gold gate miter
 sat -verify -prove-asserts -show-public -set-at 1 in_reset 1 -seq 20 -prove-skip 1 miter
@@ -26,7 +26,7 @@ hierarchy -top fsm
 proc
 flatten
 
-equiv_opt -run :prove -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx
+equiv_opt -run :prove -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx -noiopad
 async2sync
 miter -equiv -make_assert -flatten gold gate miter
 sat -verify -prove-asserts -show-public -set-at 1 in_reset 1 -seq 20 -prove-skip 1 miter
diff --git a/tests/arch/intel_alm/logic.ys b/tests/arch/intel_alm/logic.ys
index e8b26a524..916c1161c 100644
--- a/tests/arch/intel_alm/logic.ys
+++ b/tests/arch/intel_alm/logic.ys
@@ -1,7 +1,7 @@
 read_verilog ../common/logic.v
 hierarchy -top top
 proc
-equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclonev # equivalency check
+equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclonev -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd top # Constrain all select calls below inside the top module
 
@@ -15,7 +15,7 @@ design -reset
 read_verilog ../common/logic.v
 hierarchy -top top
 proc
-equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclone10gx -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd top # Constrain all select calls below inside the top module
 
diff --git a/tests/arch/intel_alm/lutram.ys b/tests/arch/intel_alm/lutram.ys
index 66f8a1536..c21c9103b 100644
--- a/tests/arch/intel_alm/lutram.ys
+++ b/tests/arch/intel_alm/lutram.ys
@@ -2,7 +2,7 @@ read_verilog ../common/lutram.v
 hierarchy -top lutram_1w1r
 proc
 memory -nomap
-equiv_opt -run :prove -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v -map +/intel_alm/common/mem_sim.v synth_intel_alm -family cyclonev -nobram
+equiv_opt -run :prove -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v -map +/intel_alm/common/mem_sim.v synth_intel_alm -family cyclonev -nobram -noiopad
 memory
 opt -full
 
@@ -24,7 +24,7 @@ read_verilog ../common/lutram.v
 hierarchy -top lutram_1w1r
 proc
 memory -nomap
-equiv_opt -run :prove -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v -map +/intel_alm/common/mem_sim.v synth_intel_alm -family cyclonev -nobram
+equiv_opt -run :prove -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v -map +/intel_alm/common/mem_sim.v synth_intel_alm -family cyclonev -nobram -noiopad
 memory
 opt -full
 
diff --git a/tests/arch/intel_alm/mul.ys b/tests/arch/intel_alm/mul.ys
index 49934740f..10f3f7bf4 100644
--- a/tests/arch/intel_alm/mul.ys
+++ b/tests/arch/intel_alm/mul.ys
@@ -2,7 +2,7 @@ read_verilog ../common/mul.v
 chparam -set X_WIDTH 8 -set Y_WIDTH 8 -set A_WIDTH 16
 hierarchy -top top
 proc
-equiv_opt -assert -map +/intel_alm/common/dsp_sim.v synth_intel_alm -family cyclonev # equivalency check
+equiv_opt -assert -map +/intel_alm/common/dsp_sim.v synth_intel_alm -family cyclonev -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd top # Constrain all select calls below inside the top module
 
@@ -16,7 +16,7 @@ read_verilog ../common/mul.v
 chparam -set X_WIDTH 17 -set Y_WIDTH 17 -set A_WIDTH 34
 hierarchy -top top
 proc
-equiv_opt -assert -map +/intel_alm/common/dsp_sim.v synth_intel_alm -family cyclonev # equivalency check
+equiv_opt -assert -map +/intel_alm/common/dsp_sim.v synth_intel_alm -family cyclonev -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd top # Constrain all select calls below inside the top module
 
@@ -28,7 +28,7 @@ read_verilog ../common/mul.v
 chparam -set X_WIDTH 17 -set Y_WIDTH 17 -set A_WIDTH 34
 hierarchy -top top
 proc
-equiv_opt -assert -map +/intel_alm/common/dsp_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+equiv_opt -assert -map +/intel_alm/common/dsp_sim.v synth_intel_alm -family cyclone10gx -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd top # Constrain all select calls below inside the top module
 
@@ -40,7 +40,7 @@ read_verilog ../common/mul.v
 chparam -set X_WIDTH 26 -set Y_WIDTH 26 -set A_WIDTH 52
 hierarchy -top top
 proc
-equiv_opt -assert -map +/intel_alm/common/dsp_sim.v synth_intel_alm -family cyclonev # equivalency check
+equiv_opt -assert -map +/intel_alm/common/dsp_sim.v synth_intel_alm -family cyclonev -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd top # Constrain all select calls below inside the top module
 
@@ -52,7 +52,7 @@ read_verilog ../common/mul.v
 chparam -set X_WIDTH 26 -set Y_WIDTH 26 -set A_WIDTH 52
 hierarchy -top top
 proc
-equiv_opt -assert -map +/intel_alm/common/dsp_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+equiv_opt -assert -map +/intel_alm/common/dsp_sim.v synth_intel_alm -family cyclone10gx -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd top # Constrain all select calls below inside the top module
 
diff --git a/tests/arch/intel_alm/mux.ys b/tests/arch/intel_alm/mux.ys
index ac3b9b08f..c386542c4 100644
--- a/tests/arch/intel_alm/mux.ys
+++ b/tests/arch/intel_alm/mux.ys
@@ -4,7 +4,7 @@ design -save read
 
 hierarchy -top mux2
 proc
-equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclonev # equivalency check
+equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclonev -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd mux2 # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_ALUT3
@@ -14,7 +14,7 @@ select -assert-none t:MISTRAL_ALUT3 %% t:* %D
 design -load read
 hierarchy -top mux2
 proc
-equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclone10gx -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd mux2 # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_ALUT3
@@ -24,7 +24,7 @@ select -assert-none t:MISTRAL_ALUT3 %% t:* %D
 design -load read
 hierarchy -top mux4
 proc
-equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclonev # equivalency check
+equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclonev -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd mux4 # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_ALUT6
@@ -34,7 +34,7 @@ select -assert-none t:MISTRAL_ALUT6 %% t:* %D
 design -load read
 hierarchy -top mux4
 proc
-equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclone10gx -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd mux4 # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_ALUT6
@@ -44,7 +44,7 @@ select -assert-none t:MISTRAL_ALUT6 %% t:* %D
 design -load read
 hierarchy -top mux8
 proc
-equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclonev # equivalency check
+equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclonev -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd mux8 # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_ALUT3
@@ -55,7 +55,7 @@ select -assert-none t:MISTRAL_ALUT3 t:MISTRAL_ALUT6 %% t:* %D
 design -load read
 hierarchy -top mux8
 proc
-equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+equiv_opt -assert -map +/intel_alm/common/alm_sim.v synth_intel_alm -family cyclone10gx -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd mux8 # Constrain all select calls below inside the top module
 select -assert-count 1 t:MISTRAL_ALUT3
diff --git a/tests/arch/intel_alm/quartus_ice.ys b/tests/arch/intel_alm/quartus_ice.ys
index a88226e13..286e6653c 100644
--- a/tests/arch/intel_alm/quartus_ice.ys
+++ b/tests/arch/intel_alm/quartus_ice.ys
@@ -22,5 +22,5 @@ module top();
 endmodule
 EOT
 
-synth_intel_alm -family cyclone10gx -quartus
+synth_intel_alm -family cyclone10gx -quartus -noiopad
 select -assert-none w:*[* w:*]*
diff --git a/tests/arch/intel_alm/shifter.ys b/tests/arch/intel_alm/shifter.ys
index e307b5486..bf19beef1 100644
--- a/tests/arch/intel_alm/shifter.ys
+++ b/tests/arch/intel_alm/shifter.ys
@@ -2,7 +2,7 @@ read_verilog ../common/shifter.v
 hierarchy -top top
 proc
 flatten
-equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev # equivalency check
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclonev -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd top # Constrain all select calls below inside the top module
 select -assert-count 8 t:MISTRAL_FF
@@ -14,7 +14,7 @@ read_verilog ../common/shifter.v
 hierarchy -top top
 proc
 flatten
-equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx # equivalency check
+equiv_opt -async2sync -assert -map +/intel_alm/common/alm_sim.v -map +/intel_alm/common/dff_sim.v synth_intel_alm -family cyclone10gx -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd top # Constrain all select calls below inside the top module
 select -assert-count 8 t:MISTRAL_FF
diff --git a/tests/arch/intel_alm/tribuf.ys b/tests/arch/intel_alm/tribuf.ys
index 7f3b38493..8b81c4cd4 100644
--- a/tests/arch/intel_alm/tribuf.ys
+++ b/tests/arch/intel_alm/tribuf.ys
@@ -4,7 +4,7 @@ proc
 tribuf
 flatten
 synth
-equiv_opt -assert -map +/simcells.v synth_intel_alm -family cyclonev # equivalency check
+equiv_opt -assert -map +/simcells.v synth_intel_alm -family cyclonev -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd tristate # Constrain all select calls below inside the top module
 #Internal cell type used. Need support it.
@@ -19,7 +19,7 @@ proc
 tribuf
 flatten
 synth
-equiv_opt -assert -map +/simcells.v synth_intel_alm -family cyclone10gx # equivalency check
+equiv_opt -assert -map +/simcells.v synth_intel_alm -family cyclone10gx -noiopad # equivalency check
 design -load postopt # load the post-opt design (otherwise equiv_opt loads the pre-opt design)
 cd tristate # Constrain all select calls below inside the top module
 #Internal cell type used. Need support it.