From: Tom Tromey Date: Fri, 15 Mar 2019 23:38:06 +0000 (-0600) Subject: Add configure check for std::thread X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=5e03027845ecc877621ea71bc342a30ecf2999ff;p=binutils-gdb.git Add configure check for std::thread This adds a configure check for std::thread. This is needed because std::thread is not available on some systems, like some versions of mingw and DJGPP. This also adds configury to make sure that a threaded gdb links against the correct threading library (-lpthread or the like), and passes the right flags (e.g., -pthread) to the compilations. Note that this also links gdbserver against the thread library. This is not strictly necessary at this point in the series, but a later patch will change gdbsupport to use pthread_sigmask, at which point this will be needed. gdb/ChangeLog 2019-11-26 Tom Tromey * acinclude.m4: Include ax_pthread.m4. * Makefile.in (PTHREAD_CFLAGS, PTHREAD_LIBS): New variables. (INTERNAL_CFLAGS_BASE): Use PTHREAD_CFLAGS. (CLIBS): Use PTHREAD_LIBS. (aclocal_m4_deps): Add ax_pthread.m4. * config.in, configure: Rebuild. * gdbsupport/common.m4 (GDB_AC_COMMON): Check for std::thread. gdb/gdbserver/ChangeLog 2019-11-26 Tom Tromey * Makefile.in (PTHREAD_CFLAGS, PTHREAD_LIBS): New variables. (INTERNAL_CFLAGS_BASE): Use PTHREAD_CFLAGS. (GDBSERVER_LIBS): Use PTHREAD_LIBS. * acinclude.m4: Include ax_pthread.m4. * config.in, configure: Rebuild. Change-Id: I00ec55db6077f2615421a93461fc3be57e916aa0 --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index dc684be3982..ca9290180cc 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,13 @@ +2019-11-26 Tom Tromey + + * acinclude.m4: Include ax_pthread.m4. + * Makefile.in (PTHREAD_CFLAGS, PTHREAD_LIBS): New variables. + (INTERNAL_CFLAGS_BASE): Use PTHREAD_CFLAGS. + (CLIBS): Use PTHREAD_LIBS. + (aclocal_m4_deps): Add ax_pthread.m4. + * config.in, configure: Rebuild. + * gdbsupport/common.m4 (GDB_AC_COMMON): Check for std::thread. + 2019-11-26 Tom Tromey * symtab.h (struct minimal_symbol) : New member. diff --git a/gdb/Makefile.in b/gdb/Makefile.in index 600ebabb1fc..404f559baef 100644 --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -210,6 +210,9 @@ WERROR_CFLAGS = @WERROR_CFLAGS@ GDB_WARN_CFLAGS = $(WARN_CFLAGS) GDB_WERROR_CFLAGS = $(WERROR_CFLAGS) +PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ +PTHREAD_LIBS = @PTHREAD_LIBS@ + RDYNAMIC = @RDYNAMIC@ # Where is the INTL library? Typically in ../intl. @@ -581,7 +584,7 @@ INTERNAL_CFLAGS_BASE = \ $(GDB_CFLAGS) $(OPCODES_CFLAGS) $(READLINE_CFLAGS) $(ZLIBINC) \ $(BFD_CFLAGS) $(INCLUDE_CFLAGS) $(LIBDECNUMBER_CFLAGS) \ $(INTL_CFLAGS) $(INCGNU) $(ENABLE_CFLAGS) $(INTERNAL_CPPFLAGS) \ - $(SRCHIGH_CFLAGS) $(TOP_CFLAGS) + $(SRCHIGH_CFLAGS) $(TOP_CFLAGS) $(PTHREAD_CFLAGS) INTERNAL_WARN_CFLAGS = $(INTERNAL_CFLAGS_BASE) $(GDB_WARN_CFLAGS) INTERNAL_CFLAGS = $(INTERNAL_WARN_CFLAGS) $(GDB_WERROR_CFLAGS) @@ -595,7 +598,7 @@ LDFLAGS = @LDFLAGS@ # PROFILE_CFLAGS is _not_ included, however, because we use monstartup. INTERNAL_LDFLAGS = \ $(CXXFLAGS) $(GLOBAL_CFLAGS) $(MH_LDFLAGS) \ - $(LDFLAGS) $(CONFIG_LDFLAGS) + $(LDFLAGS) $(CONFIG_LDFLAGS) $(PTHREAD_CFLAGS) # Libraries and corresponding dependencies for compiling gdb. # XM_CLIBS, defined in *config files, have host-dependent libs. @@ -606,7 +609,7 @@ CLIBS = $(SIM) $(READLINE) $(OPCODES) $(BFD) $(LIBCTF) $(ZLIB) \ @LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \ $(LIBEXPAT) $(LIBLZMA) $(LIBBABELTRACE) $(LIBIPT) \ $(LIBIBERTY) $(WIN32LIBS) $(LIBGNU) $(LIBICONV) $(LIBMPFR) \ - $(SRCHIGH_LIBS) $(LIBXXHASH) + $(SRCHIGH_LIBS) $(LIBXXHASH) $(PTHREAD_LIBS) CDEPS = $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) $(LIBCTF) \ $(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU) @@ -2063,7 +2066,8 @@ aclocal_m4_deps = \ ../config/depstand.m4 \ ../config/lcmessage.m4 \ ../config/codeset.m4 \ - ../config/zlib.m4 + ../config/zlib.m4 \ + ../config/ax_pthread.m4 $(srcdir)/aclocal.m4: @MAINTAINER_MODE_TRUE@ $(aclocal_m4_deps) cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) diff --git a/gdb/acinclude.m4 b/gdb/acinclude.m4 index 5f1358b8207..8592b6c875b 100644 --- a/gdb/acinclude.m4 +++ b/gdb/acinclude.m4 @@ -73,6 +73,8 @@ m4_include(ptrace.m4) m4_include(ax_cxx_compile_stdcxx.m4) +m4_include([../config/ax_pthread.m4]) + ## ----------------------------------------- ## ## ANSIfy the C compiler whenever possible. ## ## From Franc,ois Pinard ## diff --git a/gdb/config.in b/gdb/config.in index fc05f154b72..f20693b05d8 100644 --- a/gdb/config.in +++ b/gdb/config.in @@ -17,6 +17,9 @@ */ #undef CRAY_STACKSEG_END +/* Define to 1 if std::thread works. */ +#undef CXX_STD_THREAD + /* Define to 1 if using `alloca.c'. */ #undef C_ALLOCA @@ -336,6 +339,9 @@ /* Define if has psaddr_t. */ #undef HAVE_PSADDR_T +/* Have PTHREAD_PRIO_INHERIT. */ +#undef HAVE_PTHREAD_PRIO_INHERIT + /* Define to 1 if you have the `ptrace64' function. */ #undef HAVE_PTRACE64 @@ -622,6 +628,10 @@ /* Define to 1 if the "%ll" format works to print long longs. */ #undef PRINTF_HAS_LONG_LONG +/* Define to necessary symbol if this constant uses a non-standard name on + your system. */ +#undef PTHREAD_CREATE_JOINABLE + /* Define to the type of arg 1 for ptrace. */ #undef PTRACE_TYPE_ARG1 diff --git a/gdb/configure b/gdb/configure index 4afd7f9b968..50164ac8a4a 100755 --- a/gdb/configure +++ b/gdb/configure @@ -702,6 +702,11 @@ SYSTEM_GDBINIT TARGET_SYSTEM_ROOT CONFIG_LDFLAGS RDYNAMIC +PTHREAD_CFLAGS +PTHREAD_LIBS +PTHREAD_CC +ax_pthread_config +SED ALLOCA LTLIBIPT LIBIPT @@ -13126,6 +13131,75 @@ _ACEOF fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 +$as_echo_n "checking for a sed that does not truncate output... " >&6; } +if ${ac_cv_path_SED+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + { ac_script=; unset ac_script;} + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_SED" || continue +# Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_SED_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_SED"; then + as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 + fi +else + ac_cv_path_SED=$SED +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 +$as_echo "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } @@ -13511,6 +13585,699 @@ cat >>confdefs.h <<_ACEOF _ACEOF + # Check for std::thread. This does not work on some platforms, like + # mingw and DJGPP. + ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + + + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ax_pthread_ok=no + +# We used to check for pthread.h first, but this fails if pthread.h +# requires special compiler flags (e.g. on Tru64 or Sequent). +# It gets checked for in the link test anyway. + +# First of all, check if the user has set any of the PTHREAD_LIBS, +# etcetera environment variables, and if threads linking works using +# them: +if test "x$PTHREAD_CFLAGS$PTHREAD_LIBS" != "x"; then + ax_pthread_save_CC="$CC" + ax_pthread_save_CFLAGS="$CFLAGS" + ax_pthread_save_LIBS="$LIBS" + if test "x$PTHREAD_CC" != "x"; then : + CC="$PTHREAD_CC" +fi + CFLAGS="$CFLAGS $PTHREAD_CFLAGS" + LIBS="$PTHREAD_LIBS $LIBS" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_join using $CC $PTHREAD_CFLAGS $PTHREAD_LIBS" >&5 +$as_echo_n "checking for pthread_join using $CC $PTHREAD_CFLAGS $PTHREAD_LIBS... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char pthread_join (); +int +main () +{ +return pthread_join (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ax_pthread_ok=yes +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_ok" >&5 +$as_echo "$ax_pthread_ok" >&6; } + if test "x$ax_pthread_ok" = "xno"; then + PTHREAD_LIBS="" + PTHREAD_CFLAGS="" + fi + CC="$ax_pthread_save_CC" + CFLAGS="$ax_pthread_save_CFLAGS" + LIBS="$ax_pthread_save_LIBS" +fi + +# We must check for the threads library under a number of different +# names; the ordering is very important because some systems +# (e.g. DEC) have both -lpthread and -lpthreads, where one of the +# libraries is broken (non-POSIX). + +# Create a list of thread flags to try. Items starting with a "-" are +# C compiler flags, and other items are library names, except for "none" +# which indicates that we try without any flags at all, and "pthread-config" +# which is a program returning the flags for the Pth emulation library. + +ax_pthread_flags="pthreads none -Kthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config" + +# The ordering *is* (sometimes) important. Some notes on the +# individual items follow: + +# pthreads: AIX (must check this before -lpthread) +# none: in case threads are in libc; should be tried before -Kthread and +# other compiler flags to prevent continual compiler warnings +# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h) +# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads), Tru64 +# (Note: HP C rejects this with "bad form for `-t' option") +# -pthreads: Solaris/gcc (Note: HP C also rejects) +# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it +# doesn't hurt to check since this sometimes defines pthreads and +# -D_REENTRANT too), HP C (must be checked before -lpthread, which +# is present but should not be used directly; and before -mthreads, +# because the compiler interprets this as "-mt" + "-hreads") +# -mthreads: Mingw32/gcc, Lynx/gcc +# pthread: Linux, etcetera +# --thread-safe: KAI C++ +# pthread-config: use pthread-config program (for GNU Pth library) + +case $host_os in + + freebsd*) + + # -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able) + # lthread: LinuxThreads port on FreeBSD (also preferred to -pthread) + + ax_pthread_flags="-kthread lthread $ax_pthread_flags" + ;; + + hpux*) + + # From the cc(1) man page: "[-mt] Sets various -D flags to enable + # multi-threading and also sets -lpthread." + + ax_pthread_flags="-mt -pthread pthread $ax_pthread_flags" + ;; + + openedition*) + + # IBM z/OS requires a feature-test macro to be defined in order to + # enable POSIX threads at all, so give the user a hint if this is + # not set. (We don't define these ourselves, as they can affect + # other portions of the system API in unpredictable ways.) + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +# if !defined(_OPEN_THREADS) && !defined(_UNIX03_THREADS) + AX_PTHREAD_ZOS_MISSING +# endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "AX_PTHREAD_ZOS_MISSING" >/dev/null 2>&1; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: IBM z/OS requires -D_OPEN_THREADS or -D_UNIX03_THREADS to enable pthreads support." >&5 +$as_echo "$as_me: WARNING: IBM z/OS requires -D_OPEN_THREADS or -D_UNIX03_THREADS to enable pthreads support." >&2;} +fi +rm -f conftest* + + ;; + + solaris*) + + # On Solaris (at least, for some versions), libc contains stubbed + # (non-functional) versions of the pthreads routines, so link-based + # tests will erroneously succeed. (N.B.: The stubs are missing + # pthread_cleanup_push, or rather a function called by this macro, + # so we could check for that, but who knows whether they'll stub + # that too in a future libc.) So we'll check first for the + # standard Solaris way of linking pthreads (-mt -lpthread). + + ax_pthread_flags="-mt,pthread pthread $ax_pthread_flags" + ;; +esac + +# GCC generally uses -pthread, or -pthreads on some platforms (e.g. SPARC) + +if test "x$GCC" = "xyes"; then : + ax_pthread_flags="-pthread -pthreads $ax_pthread_flags" +fi + +# The presence of a feature test macro requesting re-entrant function +# definitions is, on some systems, a strong hint that pthreads support is +# correctly enabled + +case $host_os in + darwin* | hpux* | linux* | osf* | solaris*) + ax_pthread_check_macro="_REENTRANT" + ;; + + aix*) + ax_pthread_check_macro="_THREAD_SAFE" + ;; + + *) + ax_pthread_check_macro="--" + ;; +esac +if test "x$ax_pthread_check_macro" = "x--"; then : + ax_pthread_check_cond=0 +else + ax_pthread_check_cond="!defined($ax_pthread_check_macro)" +fi + +# Are we compiling with Clang? + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC is Clang" >&5 +$as_echo_n "checking whether $CC is Clang... " >&6; } +if ${ax_cv_PTHREAD_CLANG+:} false; then : + $as_echo_n "(cached) " >&6 +else + ax_cv_PTHREAD_CLANG=no + # Note that Autoconf sets GCC=yes for Clang as well as GCC + if test "x$GCC" = "xyes"; then + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Note: Clang 2.7 lacks __clang_[a-z]+__ */ +# if defined(__clang__) && defined(__llvm__) + AX_PTHREAD_CC_IS_CLANG +# endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "AX_PTHREAD_CC_IS_CLANG" >/dev/null 2>&1; then : + ax_cv_PTHREAD_CLANG=yes +fi +rm -f conftest* + + fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_CLANG" >&5 +$as_echo "$ax_cv_PTHREAD_CLANG" >&6; } +ax_pthread_clang="$ax_cv_PTHREAD_CLANG" + +ax_pthread_clang_warning=no + +# Clang needs special handling, because older versions handle the -pthread +# option in a rather... idiosyncratic way + +if test "x$ax_pthread_clang" = "xyes"; then + + # Clang takes -pthread; it has never supported any other flag + + # (Note 1: This will need to be revisited if a system that Clang + # supports has POSIX threads in a separate library. This tends not + # to be the way of modern systems, but it's conceivable.) + + # (Note 2: On some systems, notably Darwin, -pthread is not needed + # to get POSIX threads support; the API is always present and + # active. We could reasonably leave PTHREAD_CFLAGS empty. But + # -pthread does define _REENTRANT, and while the Darwin headers + # ignore this macro, third-party headers might not.) + + PTHREAD_CFLAGS="-pthread" + PTHREAD_LIBS= + + ax_pthread_ok=yes + + # However, older versions of Clang make a point of warning the user + # that, in an invocation where only linking and no compilation is + # taking place, the -pthread option has no effect ("argument unused + # during compilation"). They expect -pthread to be passed in only + # when source code is being compiled. + # + # Problem is, this is at odds with the way Automake and most other + # C build frameworks function, which is that the same flags used in + # compilation (CFLAGS) are also used in linking. Many systems + # supported by AX_PTHREAD require exactly this for POSIX threads + # support, and in fact it is often not straightforward to specify a + # flag that is used only in the compilation phase and not in + # linking. Such a scenario is extremely rare in practice. + # + # Even though use of the -pthread flag in linking would only print + # a warning, this can be a nuisance for well-run software projects + # that build with -Werror. So if the active version of Clang has + # this misfeature, we search for an option to squash it. + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether Clang needs flag to prevent \"argument unused\" warning when linking with -pthread" >&5 +$as_echo_n "checking whether Clang needs flag to prevent \"argument unused\" warning when linking with -pthread... " >&6; } +if ${ax_cv_PTHREAD_CLANG_NO_WARN_FLAG+:} false; then : + $as_echo_n "(cached) " >&6 +else + ax_cv_PTHREAD_CLANG_NO_WARN_FLAG=unknown + # Create an alternate version of $ac_link that compiles and + # links in two steps (.c -> .o, .o -> exe) instead of one + # (.c -> exe), because the warning occurs only in the second + # step + ax_pthread_save_ac_link="$ac_link" + ax_pthread_sed='s/conftest\.\$ac_ext/conftest.$ac_objext/g' + ax_pthread_link_step=`$as_echo "$ac_link" | sed "$ax_pthread_sed"` + ax_pthread_2step_ac_link="($ac_compile) && (echo ==== >&5) && ($ax_pthread_link_step)" + ax_pthread_save_CFLAGS="$CFLAGS" + for ax_pthread_try in '' -Qunused-arguments -Wno-unused-command-line-argument unknown; do + if test "x$ax_pthread_try" = "xunknown"; then : + break +fi + CFLAGS="-Werror -Wunknown-warning-option $ax_pthread_try -pthread $ax_pthread_save_CFLAGS" + ac_link="$ax_pthread_save_ac_link" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int main(void){return 0;} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_link="$ax_pthread_2step_ac_link" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int main(void){return 0;} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + break +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + done + ac_link="$ax_pthread_save_ac_link" + CFLAGS="$ax_pthread_save_CFLAGS" + if test "x$ax_pthread_try" = "x"; then : + ax_pthread_try=no +fi + ax_cv_PTHREAD_CLANG_NO_WARN_FLAG="$ax_pthread_try" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" >&5 +$as_echo "$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" >&6; } + + case "$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" in + no | unknown) ;; + *) PTHREAD_CFLAGS="$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG $PTHREAD_CFLAGS" ;; + esac + +fi # $ax_pthread_clang = yes + +if test "x$ax_pthread_ok" = "xno"; then +for ax_pthread_try_flag in $ax_pthread_flags; do + + case $ax_pthread_try_flag in + none) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether pthreads work without any flags" >&5 +$as_echo_n "checking whether pthreads work without any flags... " >&6; } + ;; + + -mt,pthread) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether pthreads work with -mt -lpthread" >&5 +$as_echo_n "checking whether pthreads work with -mt -lpthread... " >&6; } + PTHREAD_CFLAGS="-mt" + PTHREAD_LIBS="-lpthread" + ;; + + -*) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether pthreads work with $ax_pthread_try_flag" >&5 +$as_echo_n "checking whether pthreads work with $ax_pthread_try_flag... " >&6; } + PTHREAD_CFLAGS="$ax_pthread_try_flag" + ;; + + pthread-config) + # Extract the first word of "pthread-config", so it can be a program name with args. +set dummy pthread-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ax_pthread_config+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ax_pthread_config"; then + ac_cv_prog_ax_pthread_config="$ax_pthread_config" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ax_pthread_config="yes" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + test -z "$ac_cv_prog_ax_pthread_config" && ac_cv_prog_ax_pthread_config="no" +fi +fi +ax_pthread_config=$ac_cv_prog_ax_pthread_config +if test -n "$ax_pthread_config"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_config" >&5 +$as_echo "$ax_pthread_config" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + if test "x$ax_pthread_config" = "xno"; then : + continue +fi + PTHREAD_CFLAGS="`pthread-config --cflags`" + PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`" + ;; + + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for the pthreads library -l$ax_pthread_try_flag" >&5 +$as_echo_n "checking for the pthreads library -l$ax_pthread_try_flag... " >&6; } + PTHREAD_LIBS="-l$ax_pthread_try_flag" + ;; + esac + + ax_pthread_save_CFLAGS="$CFLAGS" + ax_pthread_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $PTHREAD_CFLAGS" + LIBS="$PTHREAD_LIBS $LIBS" + + # Check for various functions. We must include pthread.h, + # since some functions may be macros. (On the Sequent, we + # need a special flag -Kthread to make this header compile.) + # We check for pthread_join because it is in -lpthread on IRIX + # while pthread_create is in libc. We check for pthread_attr_init + # due to DEC craziness with -lpthreads. We check for + # pthread_cleanup_push because it is one of the few pthread + # functions on Solaris that doesn't have a non-functional libc stub. + # We try pthread_create on general principles. + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +# if $ax_pthread_check_cond +# error "$ax_pthread_check_macro must be defined" +# endif + static void routine(void *a) { a = 0; } + static void *start_routine(void *a) { return a; } +int +main () +{ +pthread_t th; pthread_attr_t attr; + pthread_create(&th, 0, start_routine, 0); + pthread_join(th, 0); + pthread_attr_init(&attr); + pthread_cleanup_push(routine, 0); + pthread_cleanup_pop(0) /* ; */ + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ax_pthread_ok=yes +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + + CFLAGS="$ax_pthread_save_CFLAGS" + LIBS="$ax_pthread_save_LIBS" + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_ok" >&5 +$as_echo "$ax_pthread_ok" >&6; } + if test "x$ax_pthread_ok" = "xyes"; then : + break +fi + + PTHREAD_LIBS="" + PTHREAD_CFLAGS="" +done +fi + +# Various other checks: +if test "x$ax_pthread_ok" = "xyes"; then + ax_pthread_save_CFLAGS="$CFLAGS" + ax_pthread_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $PTHREAD_CFLAGS" + LIBS="$PTHREAD_LIBS $LIBS" + + # Detect AIX lossage: JOINABLE attribute is called UNDETACHED. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for joinable pthread attribute" >&5 +$as_echo_n "checking for joinable pthread attribute... " >&6; } +if ${ax_cv_PTHREAD_JOINABLE_ATTR+:} false; then : + $as_echo_n "(cached) " >&6 +else + ax_cv_PTHREAD_JOINABLE_ATTR=unknown + for ax_pthread_attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +int attr = $ax_pthread_attr; return attr /* ; */ + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ax_cv_PTHREAD_JOINABLE_ATTR=$ax_pthread_attr; break +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + done + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_JOINABLE_ATTR" >&5 +$as_echo "$ax_cv_PTHREAD_JOINABLE_ATTR" >&6; } + if test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xunknown" && \ + test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xPTHREAD_CREATE_JOINABLE" && \ + test "x$ax_pthread_joinable_attr_defined" != "xyes"; then : + +cat >>confdefs.h <<_ACEOF +#define PTHREAD_CREATE_JOINABLE $ax_cv_PTHREAD_JOINABLE_ATTR +_ACEOF + + ax_pthread_joinable_attr_defined=yes + +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether more special flags are required for pthreads" >&5 +$as_echo_n "checking whether more special flags are required for pthreads... " >&6; } +if ${ax_cv_PTHREAD_SPECIAL_FLAGS+:} false; then : + $as_echo_n "(cached) " >&6 +else + ax_cv_PTHREAD_SPECIAL_FLAGS=no + case $host_os in + solaris*) + ax_cv_PTHREAD_SPECIAL_FLAGS="-D_POSIX_PTHREAD_SEMANTICS" + ;; + esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_SPECIAL_FLAGS" >&5 +$as_echo "$ax_cv_PTHREAD_SPECIAL_FLAGS" >&6; } + if test "x$ax_cv_PTHREAD_SPECIAL_FLAGS" != "xno" && \ + test "x$ax_pthread_special_flags_added" != "xyes"; then : + PTHREAD_CFLAGS="$ax_cv_PTHREAD_SPECIAL_FLAGS $PTHREAD_CFLAGS" + ax_pthread_special_flags_added=yes +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PTHREAD_PRIO_INHERIT" >&5 +$as_echo_n "checking for PTHREAD_PRIO_INHERIT... " >&6; } +if ${ax_cv_PTHREAD_PRIO_INHERIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +int i = PTHREAD_PRIO_INHERIT; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ax_cv_PTHREAD_PRIO_INHERIT=yes +else + ax_cv_PTHREAD_PRIO_INHERIT=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_PRIO_INHERIT" >&5 +$as_echo "$ax_cv_PTHREAD_PRIO_INHERIT" >&6; } + if test "x$ax_cv_PTHREAD_PRIO_INHERIT" = "xyes" && \ + test "x$ax_pthread_prio_inherit_defined" != "xyes"; then : + +$as_echo "#define HAVE_PTHREAD_PRIO_INHERIT 1" >>confdefs.h + + ax_pthread_prio_inherit_defined=yes + +fi + + CFLAGS="$ax_pthread_save_CFLAGS" + LIBS="$ax_pthread_save_LIBS" + + # More AIX lossage: compile with *_r variant + if test "x$GCC" != "xyes"; then + case $host_os in + aix*) + case "x/$CC" in #( + x*/c89|x*/c89_128|x*/c99|x*/c99_128|x*/cc|x*/cc128|x*/xlc|x*/xlc_v6|x*/xlc128|x*/xlc128_v6) : + #handle absolute path differently from PATH based program lookup + case "x$CC" in #( + x/*) : + if as_fn_executable_p ${CC}_r; then : + PTHREAD_CC="${CC}_r" +fi ;; #( + *) : + for ac_prog in ${CC}_r +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_PTHREAD_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$PTHREAD_CC"; then + ac_cv_prog_PTHREAD_CC="$PTHREAD_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_PTHREAD_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +PTHREAD_CC=$ac_cv_prog_PTHREAD_CC +if test -n "$PTHREAD_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PTHREAD_CC" >&5 +$as_echo "$PTHREAD_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$PTHREAD_CC" && break +done +test -n "$PTHREAD_CC" || PTHREAD_CC="$CC" + ;; +esac ;; #( + *) : + ;; +esac + ;; + esac + fi +fi + +test -n "$PTHREAD_CC" || PTHREAD_CC="$CC" + + + + + +# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND: +if test "x$ax_pthread_ok" = "xyes"; then + threads=yes + : +else + ax_pthread_ok=no + threads=no +fi +ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + + + if test "$threads" = "yes"; then + save_LIBS="$LIBS" + LIBS="$PTHREAD_LIBS $LIBS" + save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS="$PTHREAD_CFLAGS $save_CXXFLAGS" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for std::thread" >&5 +$as_echo_n "checking for std::thread... " >&6; } +if ${gdb_cv_cxx_std_thread+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + void callback() { } +int +main () +{ +std::thread t(callback); + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + gdb_cv_cxx_std_thread=yes +else + gdb_cv_cxx_std_thread=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gdb_cv_cxx_std_thread" >&5 +$as_echo "$gdb_cv_cxx_std_thread" >&6; } + LIBS="$save_LIBS" + CXXFLAGS="$save_CXXFLAGS" + fi + if test $gdb_cv_cxx_std_thread = yes; then + +$as_echo "#define CXX_STD_THREAD 1" >>confdefs.h + + fi + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sigsetjmp" >&5 $as_echo_n "checking for sigsetjmp... " >&6; } if ${gdb_cv_func_sigsetjmp+:} false; then : diff --git a/gdb/gdbserver/ChangeLog b/gdb/gdbserver/ChangeLog index 7b22cfd2f8c..eee4b818a25 100644 --- a/gdb/gdbserver/ChangeLog +++ b/gdb/gdbserver/ChangeLog @@ -1,3 +1,11 @@ +2019-11-26 Tom Tromey + + * Makefile.in (PTHREAD_CFLAGS, PTHREAD_LIBS): New variables. + (INTERNAL_CFLAGS_BASE): Use PTHREAD_CFLAGS. + (GDBSERVER_LIBS): Use PTHREAD_LIBS. + * acinclude.m4: Include ax_pthread.m4. + * config.in, configure: Rebuild. + 2019-11-26 Christian Biesinger * debug.c (debug_set_output): Call safe_strerror instead of diff --git a/gdb/gdbserver/Makefile.in b/gdb/gdbserver/Makefile.in index 16012dddcbc..e79d24f96f7 100644 --- a/gdb/gdbserver/Makefile.in +++ b/gdb/gdbserver/Makefile.in @@ -139,9 +139,12 @@ CFLAGS = @CFLAGS@ CXXFLAGS = @CXXFLAGS@ CPPFLAGS = @CPPFLAGS@ +PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ +PTHREAD_LIBS = @PTHREAD_LIBS@ + # INTERNAL_CFLAGS is the aggregate of all other *CFLAGS macros. INTERNAL_CFLAGS_BASE = ${CXXFLAGS} ${GLOBAL_CFLAGS} \ - ${PROFILE_CFLAGS} ${INCLUDE_CFLAGS} ${CPPFLAGS} + ${PROFILE_CFLAGS} ${INCLUDE_CFLAGS} ${CPPFLAGS} $(PTHREAD_CFLAGS) INTERNAL_WARN_CFLAGS = ${INTERNAL_CFLAGS_BASE} $(WARN_CFLAGS) INTERNAL_CFLAGS = ${INTERNAL_WARN_CFLAGS} $(WERROR_CFLAGS) -DGDBSERVER @@ -305,7 +308,7 @@ GDBREPLAY_OBS = \ utils.o \ version.o -GDBSERVER_LIBS = @GDBSERVER_LIBS@ +GDBSERVER_LIBS = @GDBSERVER_LIBS@ $(PTHREAD_LIBS) XM_CLIBS = @LIBS@ CDEPS = $(srcdir)/proc-service.list diff --git a/gdb/gdbserver/acinclude.m4 b/gdb/gdbserver/acinclude.m4 index 880c03ac1db..4c18e9b01db 100644 --- a/gdb/gdbserver/acinclude.m4 +++ b/gdb/gdbserver/acinclude.m4 @@ -31,6 +31,8 @@ m4_include(../ax_cxx_compile_stdcxx.m4) dnl For GDB_AC_SELFTEST. m4_include(../selftest.m4) +m4_include([../../config/ax_pthread.m4]) + dnl Check for existence of a type $1 in libthread_db.h dnl Based on BFD_HAVE_SYS_PROCFS_TYPE in bfd/bfd.m4. diff --git a/gdb/gdbserver/config.in b/gdb/gdbserver/config.in index 0bce18d2a0e..4276bce9af0 100644 --- a/gdb/gdbserver/config.in +++ b/gdb/gdbserver/config.in @@ -5,6 +5,9 @@ */ #undef CRAY_STACKSEG_END +/* Define to 1 if std::thread works. */ +#undef CXX_STD_THREAD + /* Define to 1 if using `alloca.c'. */ #undef C_ALLOCA @@ -189,6 +192,9 @@ /* Define if has psaddr_t. */ #undef HAVE_PSADDR_T +/* Have PTHREAD_PRIO_INHERIT. */ +#undef HAVE_PTHREAD_PRIO_INHERIT + /* Define if the target supports PTRACE_GETFPXREGS for extended register access. */ #undef HAVE_PTRACE_GETFPXREGS @@ -334,6 +340,10 @@ /* Additional package description */ #undef PKGVERSION +/* Define to necessary symbol if this constant uses a non-standard name on + your system. */ +#undef PTHREAD_CREATE_JOINABLE + /* Define to the type of arg 1 for ptrace. */ #undef PTRACE_TYPE_ARG1 diff --git a/gdb/gdbserver/configure b/gdb/gdbserver/configure index d1d00a4cfed..882c1922a1e 100755 --- a/gdb/gdbserver/configure +++ b/gdb/gdbserver/configure @@ -636,6 +636,11 @@ WERROR_CFLAGS WARN_CFLAGS ustinc ustlibs +PTHREAD_CFLAGS +PTHREAD_LIBS +PTHREAD_CC +ax_pthread_config +SED ALLOCA CCDEPMODE CONFIG_SRC_SUBDIR @@ -6472,6 +6477,75 @@ _ACEOF fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a sed that does not truncate output" >&5 +$as_echo_n "checking for a sed that does not truncate output... " >&6; } +if ${ac_cv_path_SED+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + { ac_script=; unset ac_script;} + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" + as_fn_executable_p "$ac_path_SED" || continue +# Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + as_fn_arith $ac_count + 1 && ac_count=$as_val + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_SED_found && break 3 + done + done + done +IFS=$as_save_IFS + if test -z "$ac_cv_path_SED"; then + as_fn_error $? "no acceptable sed could be found in \$PATH" "$LINENO" 5 + fi +else + ac_cv_path_SED=$SED +fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_SED" >&5 +$as_echo "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ANSI C header files" >&5 $as_echo_n "checking for ANSI C header files... " >&6; } @@ -6857,6 +6931,699 @@ cat >>confdefs.h <<_ACEOF _ACEOF + # Check for std::thread. This does not work on some platforms, like + # mingw and DJGPP. + ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + + + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +ax_pthread_ok=no + +# We used to check for pthread.h first, but this fails if pthread.h +# requires special compiler flags (e.g. on Tru64 or Sequent). +# It gets checked for in the link test anyway. + +# First of all, check if the user has set any of the PTHREAD_LIBS, +# etcetera environment variables, and if threads linking works using +# them: +if test "x$PTHREAD_CFLAGS$PTHREAD_LIBS" != "x"; then + ax_pthread_save_CC="$CC" + ax_pthread_save_CFLAGS="$CFLAGS" + ax_pthread_save_LIBS="$LIBS" + if test "x$PTHREAD_CC" != "x"; then : + CC="$PTHREAD_CC" +fi + CFLAGS="$CFLAGS $PTHREAD_CFLAGS" + LIBS="$PTHREAD_LIBS $LIBS" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for pthread_join using $CC $PTHREAD_CFLAGS $PTHREAD_LIBS" >&5 +$as_echo_n "checking for pthread_join using $CC $PTHREAD_CFLAGS $PTHREAD_LIBS... " >&6; } + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char pthread_join (); +int +main () +{ +return pthread_join (); + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ax_pthread_ok=yes +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_ok" >&5 +$as_echo "$ax_pthread_ok" >&6; } + if test "x$ax_pthread_ok" = "xno"; then + PTHREAD_LIBS="" + PTHREAD_CFLAGS="" + fi + CC="$ax_pthread_save_CC" + CFLAGS="$ax_pthread_save_CFLAGS" + LIBS="$ax_pthread_save_LIBS" +fi + +# We must check for the threads library under a number of different +# names; the ordering is very important because some systems +# (e.g. DEC) have both -lpthread and -lpthreads, where one of the +# libraries is broken (non-POSIX). + +# Create a list of thread flags to try. Items starting with a "-" are +# C compiler flags, and other items are library names, except for "none" +# which indicates that we try without any flags at all, and "pthread-config" +# which is a program returning the flags for the Pth emulation library. + +ax_pthread_flags="pthreads none -Kthread -pthread -pthreads -mthreads pthread --thread-safe -mt pthread-config" + +# The ordering *is* (sometimes) important. Some notes on the +# individual items follow: + +# pthreads: AIX (must check this before -lpthread) +# none: in case threads are in libc; should be tried before -Kthread and +# other compiler flags to prevent continual compiler warnings +# -Kthread: Sequent (threads in libc, but -Kthread needed for pthread.h) +# -pthread: Linux/gcc (kernel threads), BSD/gcc (userland threads), Tru64 +# (Note: HP C rejects this with "bad form for `-t' option") +# -pthreads: Solaris/gcc (Note: HP C also rejects) +# -mt: Sun Workshop C (may only link SunOS threads [-lthread], but it +# doesn't hurt to check since this sometimes defines pthreads and +# -D_REENTRANT too), HP C (must be checked before -lpthread, which +# is present but should not be used directly; and before -mthreads, +# because the compiler interprets this as "-mt" + "-hreads") +# -mthreads: Mingw32/gcc, Lynx/gcc +# pthread: Linux, etcetera +# --thread-safe: KAI C++ +# pthread-config: use pthread-config program (for GNU Pth library) + +case $host_os in + + freebsd*) + + # -kthread: FreeBSD kernel threads (preferred to -pthread since SMP-able) + # lthread: LinuxThreads port on FreeBSD (also preferred to -pthread) + + ax_pthread_flags="-kthread lthread $ax_pthread_flags" + ;; + + hpux*) + + # From the cc(1) man page: "[-mt] Sets various -D flags to enable + # multi-threading and also sets -lpthread." + + ax_pthread_flags="-mt -pthread pthread $ax_pthread_flags" + ;; + + openedition*) + + # IBM z/OS requires a feature-test macro to be defined in order to + # enable POSIX threads at all, so give the user a hint if this is + # not set. (We don't define these ourselves, as they can affect + # other portions of the system API in unpredictable ways.) + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +# if !defined(_OPEN_THREADS) && !defined(_UNIX03_THREADS) + AX_PTHREAD_ZOS_MISSING +# endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "AX_PTHREAD_ZOS_MISSING" >/dev/null 2>&1; then : + { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: IBM z/OS requires -D_OPEN_THREADS or -D_UNIX03_THREADS to enable pthreads support." >&5 +$as_echo "$as_me: WARNING: IBM z/OS requires -D_OPEN_THREADS or -D_UNIX03_THREADS to enable pthreads support." >&2;} +fi +rm -f conftest* + + ;; + + solaris*) + + # On Solaris (at least, for some versions), libc contains stubbed + # (non-functional) versions of the pthreads routines, so link-based + # tests will erroneously succeed. (N.B.: The stubs are missing + # pthread_cleanup_push, or rather a function called by this macro, + # so we could check for that, but who knows whether they'll stub + # that too in a future libc.) So we'll check first for the + # standard Solaris way of linking pthreads (-mt -lpthread). + + ax_pthread_flags="-mt,pthread pthread $ax_pthread_flags" + ;; +esac + +# GCC generally uses -pthread, or -pthreads on some platforms (e.g. SPARC) + +if test "x$GCC" = "xyes"; then : + ax_pthread_flags="-pthread -pthreads $ax_pthread_flags" +fi + +# The presence of a feature test macro requesting re-entrant function +# definitions is, on some systems, a strong hint that pthreads support is +# correctly enabled + +case $host_os in + darwin* | hpux* | linux* | osf* | solaris*) + ax_pthread_check_macro="_REENTRANT" + ;; + + aix*) + ax_pthread_check_macro="_THREAD_SAFE" + ;; + + *) + ax_pthread_check_macro="--" + ;; +esac +if test "x$ax_pthread_check_macro" = "x--"; then : + ax_pthread_check_cond=0 +else + ax_pthread_check_cond="!defined($ax_pthread_check_macro)" +fi + +# Are we compiling with Clang? + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $CC is Clang" >&5 +$as_echo_n "checking whether $CC is Clang... " >&6; } +if ${ax_cv_PTHREAD_CLANG+:} false; then : + $as_echo_n "(cached) " >&6 +else + ax_cv_PTHREAD_CLANG=no + # Note that Autoconf sets GCC=yes for Clang as well as GCC + if test "x$GCC" = "xyes"; then + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +/* Note: Clang 2.7 lacks __clang_[a-z]+__ */ +# if defined(__clang__) && defined(__llvm__) + AX_PTHREAD_CC_IS_CLANG +# endif + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "AX_PTHREAD_CC_IS_CLANG" >/dev/null 2>&1; then : + ax_cv_PTHREAD_CLANG=yes +fi +rm -f conftest* + + fi + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_CLANG" >&5 +$as_echo "$ax_cv_PTHREAD_CLANG" >&6; } +ax_pthread_clang="$ax_cv_PTHREAD_CLANG" + +ax_pthread_clang_warning=no + +# Clang needs special handling, because older versions handle the -pthread +# option in a rather... idiosyncratic way + +if test "x$ax_pthread_clang" = "xyes"; then + + # Clang takes -pthread; it has never supported any other flag + + # (Note 1: This will need to be revisited if a system that Clang + # supports has POSIX threads in a separate library. This tends not + # to be the way of modern systems, but it's conceivable.) + + # (Note 2: On some systems, notably Darwin, -pthread is not needed + # to get POSIX threads support; the API is always present and + # active. We could reasonably leave PTHREAD_CFLAGS empty. But + # -pthread does define _REENTRANT, and while the Darwin headers + # ignore this macro, third-party headers might not.) + + PTHREAD_CFLAGS="-pthread" + PTHREAD_LIBS= + + ax_pthread_ok=yes + + # However, older versions of Clang make a point of warning the user + # that, in an invocation where only linking and no compilation is + # taking place, the -pthread option has no effect ("argument unused + # during compilation"). They expect -pthread to be passed in only + # when source code is being compiled. + # + # Problem is, this is at odds with the way Automake and most other + # C build frameworks function, which is that the same flags used in + # compilation (CFLAGS) are also used in linking. Many systems + # supported by AX_PTHREAD require exactly this for POSIX threads + # support, and in fact it is often not straightforward to specify a + # flag that is used only in the compilation phase and not in + # linking. Such a scenario is extremely rare in practice. + # + # Even though use of the -pthread flag in linking would only print + # a warning, this can be a nuisance for well-run software projects + # that build with -Werror. So if the active version of Clang has + # this misfeature, we search for an option to squash it. + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether Clang needs flag to prevent \"argument unused\" warning when linking with -pthread" >&5 +$as_echo_n "checking whether Clang needs flag to prevent \"argument unused\" warning when linking with -pthread... " >&6; } +if ${ax_cv_PTHREAD_CLANG_NO_WARN_FLAG+:} false; then : + $as_echo_n "(cached) " >&6 +else + ax_cv_PTHREAD_CLANG_NO_WARN_FLAG=unknown + # Create an alternate version of $ac_link that compiles and + # links in two steps (.c -> .o, .o -> exe) instead of one + # (.c -> exe), because the warning occurs only in the second + # step + ax_pthread_save_ac_link="$ac_link" + ax_pthread_sed='s/conftest\.\$ac_ext/conftest.$ac_objext/g' + ax_pthread_link_step=`$as_echo "$ac_link" | sed "$ax_pthread_sed"` + ax_pthread_2step_ac_link="($ac_compile) && (echo ==== >&5) && ($ax_pthread_link_step)" + ax_pthread_save_CFLAGS="$CFLAGS" + for ax_pthread_try in '' -Qunused-arguments -Wno-unused-command-line-argument unknown; do + if test "x$ax_pthread_try" = "xunknown"; then : + break +fi + CFLAGS="-Werror -Wunknown-warning-option $ax_pthread_try -pthread $ax_pthread_save_CFLAGS" + ac_link="$ax_pthread_save_ac_link" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int main(void){return 0;} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ac_link="$ax_pthread_2step_ac_link" + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +int main(void){return 0;} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + break +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + done + ac_link="$ax_pthread_save_ac_link" + CFLAGS="$ax_pthread_save_CFLAGS" + if test "x$ax_pthread_try" = "x"; then : + ax_pthread_try=no +fi + ax_cv_PTHREAD_CLANG_NO_WARN_FLAG="$ax_pthread_try" + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" >&5 +$as_echo "$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" >&6; } + + case "$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG" in + no | unknown) ;; + *) PTHREAD_CFLAGS="$ax_cv_PTHREAD_CLANG_NO_WARN_FLAG $PTHREAD_CFLAGS" ;; + esac + +fi # $ax_pthread_clang = yes + +if test "x$ax_pthread_ok" = "xno"; then +for ax_pthread_try_flag in $ax_pthread_flags; do + + case $ax_pthread_try_flag in + none) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether pthreads work without any flags" >&5 +$as_echo_n "checking whether pthreads work without any flags... " >&6; } + ;; + + -mt,pthread) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether pthreads work with -mt -lpthread" >&5 +$as_echo_n "checking whether pthreads work with -mt -lpthread... " >&6; } + PTHREAD_CFLAGS="-mt" + PTHREAD_LIBS="-lpthread" + ;; + + -*) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether pthreads work with $ax_pthread_try_flag" >&5 +$as_echo_n "checking whether pthreads work with $ax_pthread_try_flag... " >&6; } + PTHREAD_CFLAGS="$ax_pthread_try_flag" + ;; + + pthread-config) + # Extract the first word of "pthread-config", so it can be a program name with args. +set dummy pthread-config; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_ax_pthread_config+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$ax_pthread_config"; then + ac_cv_prog_ax_pthread_config="$ax_pthread_config" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_ax_pthread_config="yes" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + + test -z "$ac_cv_prog_ax_pthread_config" && ac_cv_prog_ax_pthread_config="no" +fi +fi +ax_pthread_config=$ac_cv_prog_ax_pthread_config +if test -n "$ax_pthread_config"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_config" >&5 +$as_echo "$ax_pthread_config" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + if test "x$ax_pthread_config" = "xno"; then : + continue +fi + PTHREAD_CFLAGS="`pthread-config --cflags`" + PTHREAD_LIBS="`pthread-config --ldflags` `pthread-config --libs`" + ;; + + *) + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for the pthreads library -l$ax_pthread_try_flag" >&5 +$as_echo_n "checking for the pthreads library -l$ax_pthread_try_flag... " >&6; } + PTHREAD_LIBS="-l$ax_pthread_try_flag" + ;; + esac + + ax_pthread_save_CFLAGS="$CFLAGS" + ax_pthread_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $PTHREAD_CFLAGS" + LIBS="$PTHREAD_LIBS $LIBS" + + # Check for various functions. We must include pthread.h, + # since some functions may be macros. (On the Sequent, we + # need a special flag -Kthread to make this header compile.) + # We check for pthread_join because it is in -lpthread on IRIX + # while pthread_create is in libc. We check for pthread_attr_init + # due to DEC craziness with -lpthreads. We check for + # pthread_cleanup_push because it is one of the few pthread + # functions on Solaris that doesn't have a non-functional libc stub. + # We try pthread_create on general principles. + + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +# if $ax_pthread_check_cond +# error "$ax_pthread_check_macro must be defined" +# endif + static void routine(void *a) { a = 0; } + static void *start_routine(void *a) { return a; } +int +main () +{ +pthread_t th; pthread_attr_t attr; + pthread_create(&th, 0, start_routine, 0); + pthread_join(th, 0); + pthread_attr_init(&attr); + pthread_cleanup_push(routine, 0); + pthread_cleanup_pop(0) /* ; */ + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ax_pthread_ok=yes +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + + CFLAGS="$ax_pthread_save_CFLAGS" + LIBS="$ax_pthread_save_LIBS" + + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_pthread_ok" >&5 +$as_echo "$ax_pthread_ok" >&6; } + if test "x$ax_pthread_ok" = "xyes"; then : + break +fi + + PTHREAD_LIBS="" + PTHREAD_CFLAGS="" +done +fi + +# Various other checks: +if test "x$ax_pthread_ok" = "xyes"; then + ax_pthread_save_CFLAGS="$CFLAGS" + ax_pthread_save_LIBS="$LIBS" + CFLAGS="$CFLAGS $PTHREAD_CFLAGS" + LIBS="$PTHREAD_LIBS $LIBS" + + # Detect AIX lossage: JOINABLE attribute is called UNDETACHED. + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for joinable pthread attribute" >&5 +$as_echo_n "checking for joinable pthread attribute... " >&6; } +if ${ax_cv_PTHREAD_JOINABLE_ATTR+:} false; then : + $as_echo_n "(cached) " >&6 +else + ax_cv_PTHREAD_JOINABLE_ATTR=unknown + for ax_pthread_attr in PTHREAD_CREATE_JOINABLE PTHREAD_CREATE_UNDETACHED; do + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +int attr = $ax_pthread_attr; return attr /* ; */ + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ax_cv_PTHREAD_JOINABLE_ATTR=$ax_pthread_attr; break +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + done + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_JOINABLE_ATTR" >&5 +$as_echo "$ax_cv_PTHREAD_JOINABLE_ATTR" >&6; } + if test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xunknown" && \ + test "x$ax_cv_PTHREAD_JOINABLE_ATTR" != "xPTHREAD_CREATE_JOINABLE" && \ + test "x$ax_pthread_joinable_attr_defined" != "xyes"; then : + +cat >>confdefs.h <<_ACEOF +#define PTHREAD_CREATE_JOINABLE $ax_cv_PTHREAD_JOINABLE_ATTR +_ACEOF + + ax_pthread_joinable_attr_defined=yes + +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether more special flags are required for pthreads" >&5 +$as_echo_n "checking whether more special flags are required for pthreads... " >&6; } +if ${ax_cv_PTHREAD_SPECIAL_FLAGS+:} false; then : + $as_echo_n "(cached) " >&6 +else + ax_cv_PTHREAD_SPECIAL_FLAGS=no + case $host_os in + solaris*) + ax_cv_PTHREAD_SPECIAL_FLAGS="-D_POSIX_PTHREAD_SEMANTICS" + ;; + esac + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_SPECIAL_FLAGS" >&5 +$as_echo "$ax_cv_PTHREAD_SPECIAL_FLAGS" >&6; } + if test "x$ax_cv_PTHREAD_SPECIAL_FLAGS" != "xno" && \ + test "x$ax_pthread_special_flags_added" != "xyes"; then : + PTHREAD_CFLAGS="$ax_cv_PTHREAD_SPECIAL_FLAGS $PTHREAD_CFLAGS" + ax_pthread_special_flags_added=yes +fi + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for PTHREAD_PRIO_INHERIT" >&5 +$as_echo_n "checking for PTHREAD_PRIO_INHERIT... " >&6; } +if ${ax_cv_PTHREAD_PRIO_INHERIT+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include +int +main () +{ +int i = PTHREAD_PRIO_INHERIT; + ; + return 0; +} +_ACEOF +if ac_fn_c_try_link "$LINENO"; then : + ax_cv_PTHREAD_PRIO_INHERIT=yes +else + ax_cv_PTHREAD_PRIO_INHERIT=no +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext conftest.$ac_ext + +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ax_cv_PTHREAD_PRIO_INHERIT" >&5 +$as_echo "$ax_cv_PTHREAD_PRIO_INHERIT" >&6; } + if test "x$ax_cv_PTHREAD_PRIO_INHERIT" = "xyes" && \ + test "x$ax_pthread_prio_inherit_defined" != "xyes"; then : + +$as_echo "#define HAVE_PTHREAD_PRIO_INHERIT 1" >>confdefs.h + + ax_pthread_prio_inherit_defined=yes + +fi + + CFLAGS="$ax_pthread_save_CFLAGS" + LIBS="$ax_pthread_save_LIBS" + + # More AIX lossage: compile with *_r variant + if test "x$GCC" != "xyes"; then + case $host_os in + aix*) + case "x/$CC" in #( + x*/c89|x*/c89_128|x*/c99|x*/c99_128|x*/cc|x*/cc128|x*/xlc|x*/xlc_v6|x*/xlc128|x*/xlc128_v6) : + #handle absolute path differently from PATH based program lookup + case "x$CC" in #( + x/*) : + if as_fn_executable_p ${CC}_r; then : + PTHREAD_CC="${CC}_r" +fi ;; #( + *) : + for ac_prog in ${CC}_r +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if ${ac_cv_prog_PTHREAD_CC+:} false; then : + $as_echo_n "(cached) " >&6 +else + if test -n "$PTHREAD_CC"; then + ac_cv_prog_PTHREAD_CC="$PTHREAD_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_PTHREAD_CC="$ac_prog" + $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done + done +IFS=$as_save_IFS + +fi +fi +PTHREAD_CC=$ac_cv_prog_PTHREAD_CC +if test -n "$PTHREAD_CC"; then + { $as_echo "$as_me:${as_lineno-$LINENO}: result: $PTHREAD_CC" >&5 +$as_echo "$PTHREAD_CC" >&6; } +else + { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$PTHREAD_CC" && break +done +test -n "$PTHREAD_CC" || PTHREAD_CC="$CC" + ;; +esac ;; #( + *) : + ;; +esac + ;; + esac + fi +fi + +test -n "$PTHREAD_CC" || PTHREAD_CC="$CC" + + + + + +# Finally, execute ACTION-IF-FOUND/ACTION-IF-NOT-FOUND: +if test "x$ax_pthread_ok" = "xyes"; then + threads=yes + : +else + ax_pthread_ok=no + threads=no +fi +ac_ext=cpp +ac_cpp='$CXXCPP $CPPFLAGS' +ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + + + if test "$threads" = "yes"; then + save_LIBS="$LIBS" + LIBS="$PTHREAD_LIBS $LIBS" + save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS="$PTHREAD_CFLAGS $save_CXXFLAGS" + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for std::thread" >&5 +$as_echo_n "checking for std::thread... " >&6; } +if ${gdb_cv_cxx_std_thread+:} false; then : + $as_echo_n "(cached) " >&6 +else + cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ +#include + void callback() { } +int +main () +{ +std::thread t(callback); + ; + return 0; +} +_ACEOF +if ac_fn_cxx_try_compile "$LINENO"; then : + gdb_cv_cxx_std_thread=yes +else + gdb_cv_cxx_std_thread=no +fi +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $gdb_cv_cxx_std_thread" >&5 +$as_echo "$gdb_cv_cxx_std_thread" >&6; } + LIBS="$save_LIBS" + CXXFLAGS="$save_CXXFLAGS" + fi + if test $gdb_cv_cxx_std_thread = yes; then + +$as_echo "#define CXX_STD_THREAD 1" >>confdefs.h + + fi + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for sigsetjmp" >&5 $as_echo_n "checking for sigsetjmp... " >&6; } if ${gdb_cv_func_sigsetjmp+:} false; then : diff --git a/gdb/gdbsupport/common.m4 b/gdb/gdbsupport/common.m4 index 471d7056f74..f813c04fd3f 100644 --- a/gdb/gdbsupport/common.m4 +++ b/gdb/gdbsupport/common.m4 @@ -37,6 +37,32 @@ AC_DEFUN([GDB_AC_COMMON], [ AC_CHECK_DECLS([strerror, strstr]) + # Check for std::thread. This does not work on some platforms, like + # mingw and DJGPP. + AC_LANG_PUSH([C++]) + AX_PTHREAD([threads=yes], [threads=no]) + if test "$threads" = "yes"; then + save_LIBS="$LIBS" + LIBS="$PTHREAD_LIBS $LIBS" + save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS="$PTHREAD_CFLAGS $save_CXXFLAGS" + AC_CACHE_CHECK([for std::thread], + gdb_cv_cxx_std_thread, + [AC_COMPILE_IFELSE([AC_LANG_PROGRAM( + [[#include + void callback() { }]], + [[std::thread t(callback);]])], + gdb_cv_cxx_std_thread=yes, + gdb_cv_cxx_std_thread=no)]) + LIBS="$save_LIBS" + CXXFLAGS="$save_CXXFLAGS" + fi + if test $gdb_cv_cxx_std_thread = yes; then + AC_DEFINE(CXX_STD_THREAD, 1, + [Define to 1 if std::thread works.]) + fi + AC_LANG_POP + dnl Check if sigsetjmp is available. Using AC_CHECK_FUNCS won't dnl do since sigsetjmp might only be defined as a macro. AC_CACHE_CHECK([for sigsetjmp], gdb_cv_func_sigsetjmp,