From: Christopher Faylor Date: Fri, 10 Nov 2000 19:27:45 +0000 (+0000) Subject: * inferior.h (step_over_calls_kind): New enum to clarify values in X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=5fbbeb2988b75ffc72f8bf77dc0c4461ba65cefd;p=binutils-gdb.git * inferior.h (step_over_calls_kind): New enum to clarify values in step_over_calls. * infcmd.c (step_over_calls): Change definition. (step_1): Use new enum values in relation to step_over_calls. (step_once): Ditto. (until_next_command): Ditto. * infrun.c (clear_proceed_status): Ditto. (handle_inferior_event): Ditto. * inferior.h (step_stop_if_no_debug): New variable. * infrun.c (step_stop_if_no_debug): Declare. (handle_inferior_event): Stop the step command if we entered a function without line info. (_initialize_infrun): New command 'set step-mode' to control the step command. * infcmd.c (step_once): Switch to stepi mode if there is no line info (and switching is enabled). --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index efa0c9ab444..1f10f9d99a7 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,25 @@ +2000-11-10 Christopher Faylor + + * inferior.h (step_over_calls_kind): New enum to clarify values in + step_over_calls. + * infcmd.c (step_over_calls): Change definition. + (step_1): Use new enum values in relation to step_over_calls. + (step_once): Ditto. + (until_next_command): Ditto. + * infrun.c (clear_proceed_status): Ditto. + (handle_inferior_event): Ditto. + +2000-11-10 Stephane Carrez + + * inferior.h (step_stop_if_no_debug): New variable. + * infrun.c (step_stop_if_no_debug): Declare. + (handle_inferior_event): Stop the step command if we entered a function + without line info. + (_initialize_infrun): New command 'set step-mode' to control the step + command. + * infcmd.c (step_once): Switch to stepi mode if there is no line info + (and switching is enabled). + 2000-11-10 J.T. Conklin * target.c (do_xfer_memory): Only perform a single memory transfer diff --git a/gdb/infcmd.c b/gdb/infcmd.c index d20cb432b55..343853abf3d 100644 --- a/gdb/infcmd.c +++ b/gdb/infcmd.c @@ -178,11 +178,7 @@ CORE_ADDR step_frame_address; CORE_ADDR step_sp; -/* 1 means step over all subroutine calls. - 0 means don't step over calls (used by stepi). - -1 means step over calls to undebuggable functions. */ - -int step_over_calls; +enum step_over_calls_kind step_over_calls; /* If stepping, nonzero means step count is > 1 so don't print frame next time inferior stops @@ -513,11 +509,11 @@ which has no line number information.\n", name); /* It is stepi. Don't step over function calls, not even to functions lacking line numbers. */ - step_over_calls = 0; + step_over_calls = STEP_OVER_NONE; } if (skip_subroutines) - step_over_calls = 1; + step_over_calls = STEP_OVER_ALL; step_multi = (count > 1); proceed ((CORE_ADDR) -1, TARGET_SIGNAL_DEFAULT, 1); @@ -607,7 +603,13 @@ step_once (int skip_subroutines, int single_inst, int count) if (!single_inst) { find_pc_line_pc_range (stop_pc, &step_range_start, &step_range_end); - if (step_range_end == 0) + + /* If we have no line info, switch to stepi mode. */ + if (step_range_end == 0 && step_stop_if_no_debug) + { + step_range_start = step_range_end = 1; + } + else if (step_range_end == 0) { char *name; if (find_pc_partial_function (stop_pc, &name, &step_range_start, @@ -628,11 +630,11 @@ which has no line number information.\n", name); /* It is stepi. Don't step over function calls, not even to functions lacking line numbers. */ - step_over_calls = 0; + step_over_calls = STEP_OVER_NONE; } if (skip_subroutines) - step_over_calls = 1; + step_over_calls = STEP_OVER_ALL; step_multi = (count > 1); arg1 = @@ -958,7 +960,7 @@ until_next_command (int from_tty) step_range_end = sal.end; } - step_over_calls = 1; + step_over_calls = STEP_OVER_ALL; step_frame_address = FRAME_FP (frame); step_sp = read_sp (); diff --git a/gdb/inferior.h b/gdb/inferior.h index 4c91e83361d..474d2788a1f 100644 --- a/gdb/inferior.h +++ b/gdb/inferior.h @@ -125,6 +125,11 @@ extern void clear_proceed_status (void); extern void proceed (CORE_ADDR, enum target_signal, int); +/* When set, stop the 'step' command if we enter a function which has + no line number information. The normal behavior is that we step + over such function. */ +extern int step_stop_if_no_debug; + extern void kill_inferior (void); extern void generic_mourn_inferior (void); @@ -335,7 +340,12 @@ extern CORE_ADDR step_sp; /* 1 means step over all subroutine calls. -1 means step over calls to undebuggable functions. */ -extern int step_over_calls; +enum step_over_calls_kind + { + STEP_OVER_NONE, + STEP_OVER_ALL, + STEP_OVER_UNDEBUGGABLE, + } step_over_calls; /* If stepping, nonzero means step count is > 1 so don't print frame next time inferior stops diff --git a/gdb/infrun.c b/gdb/infrun.c index 57233a8f1b8..01db98ca200 100644 --- a/gdb/infrun.c +++ b/gdb/infrun.c @@ -84,6 +84,11 @@ void _initialize_infrun (void); int inferior_ignoring_startup_exec_events = 0; int inferior_ignoring_leading_exec_events = 0; +/* When set, stop the 'step' command if we enter a function which has + no line number information. The normal behavior is that we step + over such function. */ +int step_stop_if_no_debug = 0; + /* In asynchronous mode, but simulating synchronous execution. */ int sync_execution = 0; @@ -940,7 +945,7 @@ clear_proceed_status (void) step_range_start = 0; step_range_end = 0; step_frame_address = 0; - step_over_calls = -1; + step_over_calls = STEP_OVER_UNDEBUGGABLE; stop_after_trap = 0; stop_soon_quietly = 0; proceed_to_finish = 0; @@ -2612,7 +2617,7 @@ handle_inferior_event (struct execution_control_state *ecs) loader dynamic symbol resolution code, we keep on single stepping until we exit the run time loader code and reach the callee's address. */ - if (step_over_calls < 0 && IN_SOLIB_DYNSYM_RESOLVE_CODE (stop_pc)) + if (step_over_calls == STEP_OVER_UNDEBUGGABLE && IN_SOLIB_DYNSYM_RESOLVE_CODE (stop_pc)) { CORE_ADDR pc_after_resolver = SKIP_SOLIB_RESOLVER (stop_pc); @@ -2733,7 +2738,7 @@ handle_inferior_event (struct execution_control_state *ecs) { /* It's a subroutine call. */ - if (step_over_calls == 0) + if (step_over_calls == STEP_OVER_NONE) { /* I presume that step_over_calls is only 0 when we're supposed to be stepping at the assembly language level @@ -2744,7 +2749,7 @@ handle_inferior_event (struct execution_control_state *ecs) return; } - if (step_over_calls > 0 || IGNORE_HELPER_CALL (stop_pc)) + if (step_over_calls == STEP_OVER_ALL || IGNORE_HELPER_CALL (stop_pc)) { /* We're doing a "next". */ @@ -2810,6 +2815,18 @@ handle_inferior_event (struct execution_control_state *ecs) return; } } + + /* If we have no line number and the step-stop-if-no-debug + is set, we stop the step so that the user has a chance to + switch in assembly mode. */ + if (step_over_calls == STEP_OVER_UNDEBUGGABLE && step_stop_if_no_debug) + { + stop_step = 1; + print_stop_reason (END_STEPPING_RANGE, 0); + stop_stepping (ecs); + return; + } + step_over_function (ecs); keep_going (ecs); return; @@ -3934,7 +3951,7 @@ struct inferior_status CORE_ADDR step_range_start; CORE_ADDR step_range_end; CORE_ADDR step_frame_address; - int step_over_calls; + enum step_over_calls_kind step_over_calls; CORE_ADDR step_resume_break_address; int stop_after_trap; int stop_soon_quietly; @@ -4309,4 +4326,13 @@ step == scheduler locked during every single-step operation.\n\ c->function.sfunc = set_schedlock_func; /* traps on target vector */ add_show_from_set (c, &showlist); + + c = add_set_cmd ("step-mode", class_run, + var_boolean, (char*) &step_stop_if_no_debug, +"Set mode of the step operation. When set, doing a step over a\n\ +function without debug line information will stop at the first\n\ +instruction of that function. Otherwise, the function is skipped and\n\ +the step command stops at a different source line.", + &setlist); + add_show_from_set (c, &showlist); }