From: Stu Grossman <grossman@cygnus>
Date: Wed, 15 Feb 1995 01:45:39 +0000 (+0000)
Subject: 	* annotate.c, breakpoint.c, defs.h, gdbtk.c, top.c:  Replace
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=6131622e34fdce69f8f42172a0c2a4e460b2325b;p=binutils-gdb.git

	* annotate.c, breakpoint.c, defs.h, gdbtk.c, top.c:  Replace
	enable/disable_breakpoint_hook with modify_breakpoint_hook.
	* gdbtk.c:  General cleanups, get rid of unused variables.  Redo
	handling of stdout/stderr to just return output as the result of
	the tcl command that caused the output.  Cleanup -Wall stuff.
	* (breakpoint_notify):  Now returns just action and breakpoint
	number.
	* (gdb_get_breakpoint_list):  New routine.  Does the obvious.
	* (gdb_get_breakpoint_info):  Mostly derived from the old
	breakpoint_notify, but returns lots more info.
	* (dsprintf_append_element):  Helper routine, works like printf,
	but appends a tcl element onto the specified DString.  Good for
	building up lists as return values.
	* (gdbtk_enable/disable_breakpoint):  Go away.  Replaced with
	gdbtk_modify_breakpoint.
	* (*many routines*):  Use new result protocol.
	* (call_wrapper):  Make sure that recursive calls don't trash results.
	* gdbtk.tcl:  New windows, autocmd, and breakpoints.
	* (gdbtk_tcl_fputs):  Don't use $current_output_win redirection
	anymore.  It's not needed (in fact, this routine may not be needed
	anymore).
	* (gdbtk_tcl_breakpoint):  Change to reflect new breakpoint
	notification protocol.
	* (gdbtk_tcl_busy gdbtk_tcl_idle):  Straighten out buttons, remove
	catches.
	* (interactive_cmd):  Use this wrapper around button invocations
	of many commands.  This will catch errors and put the results into
	the command window.  It also updates all the other windows.
	* Also, change reliefs of most things to sunken.  This actually
	looks better.
	* (create_file_win):  Fix margin binding to allow breakpoints to
	work again.
	* (create_asm_win):  Use return value of gdb_disassemble instead
	of implicit I/O to the command window.
	* (create_command_window):  Use new result protocol to get output
	from commands.
---

diff --git a/gdb/annotate.c b/gdb/annotate.c
index 026ef4cb575..470a486d593 100644
--- a/gdb/annotate.c
+++ b/gdb/annotate.c
@@ -535,7 +535,6 @@ _initialize_annotate ()
   if (annotation_level > 1)
     {
       delete_breakpoint_hook = breakpoint_changed;
-      enable_breakpoint_hook = breakpoint_changed;
-      disable_breakpoint_hook = breakpoint_changed;
+      modify_breakpoint_hook = breakpoint_changed;
     }
 }
diff --git a/gdb/gdbtk.c b/gdb/gdbtk.c
index 751e2b9672b..97e3b8372e8 100644
--- a/gdb/gdbtk.c
+++ b/gdb/gdbtk.c
@@ -38,18 +38,13 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.  */
 #include <sys/ioctl.h>
 #include <string.h>
 #include "dis-asm.h"
+#include <stdio.h>
+#include "gdbcmd.h"
 
 #ifndef FIOASYNC
 #include <sys/stropts.h>
 #endif
 
-/* Non-zero means that we're doing the gdbtk interface. */
-int gdbtk = 0;
-
-/* Non-zero means we are reloading breakpoints, etc from the
-   Gdbtk kernel, and we should suppress various messages */
-static int gdbtk_reloading = 0;
-
 /* Handle for TCL interpreter */
 static Tcl_Interp *interp = NULL;
 
@@ -91,66 +86,17 @@ null_routine(arg)
 
 /* Dynamic string header for stdout. */
 
-static Tcl_DString stdout_buffer;
-
-/* Use this to collect stdout output that will be returned as the result of a
-   tcl command.  */
-
-static int saving_output = 0;
-
-static void
-start_saving_output ()
-{
-  saving_output = 1;
-}
-
-#define get_saved_output() (Tcl_DStringValue (&stdout_buffer))
-
-static void
-finish_saving_output ()
-{
-  if (!saving_output)
-    return;
-
-  saving_output = 0;
-
-  Tcl_DStringFree (&stdout_buffer);
-}
+static Tcl_DString *result_ptr;
 
-/* This routine redirects the output of fputs_unfiltered so that
-   the user can see what's going on in his debugger window. */
-
-static void
-flush_holdbuf ()
-{
-  char *s, *argv[1];
-
-  /* We use Tcl_Merge to quote braces and funny characters as necessary. */
-
-  argv[0] = Tcl_DStringValue (&stdout_buffer);
-  s = Tcl_Merge (1, argv);
-
-  Tcl_DStringFree (&stdout_buffer);
-
-  Tcl_VarEval (interp, "gdbtk_tcl_fputs ", s, NULL);
-
-  free (s);
-}
-
 static void
 gdbtk_flush (stream)
      FILE *stream;
 {
-  if (stream != gdb_stdout || saving_output)
-    return;
-
-  /* Flush output from C to tcl land.  */
-
-  flush_holdbuf ();
-
+#if 0
   /* Force immediate screen update */
 
   Tcl_VarEval (interp, "gdbtk_tcl_flush", NULL);
+#endif
 }
 
 static void
@@ -158,21 +104,20 @@ gdbtk_fputs (ptr, stream)
      const char *ptr;
      FILE *stream;
 {
-  int len;
-
-  if (stream != gdb_stdout)
+  if (result_ptr)
+    Tcl_DStringAppend (result_ptr, ptr, -1);
+  else
     {
-      Tcl_VarEval (interp, "gdbtk_tcl_fputs_error ", "{", ptr, "}", NULL);
-      return;
-    }
+      Tcl_DString str;
 
-  Tcl_DStringAppend (&stdout_buffer, ptr, -1);
+      Tcl_DStringInit (&str);
 
-  if (saving_output)
-    return;
+      Tcl_DStringAppend (&str, "gdbtk_tcl_fputs", -1);
+      Tcl_DStringAppendElement (&str, ptr);
 
-  if (Tcl_DStringLength (&stdout_buffer) > 1000)
-    flush_holdbuf ();
+      Tcl_Eval (interp, Tcl_DStringValue (&str));
+      Tcl_DStringFree (&str);
+    }
 }
 
 static int
@@ -185,43 +130,125 @@ gdbtk_query (args)
 
   query = va_arg (args, char *);
 
-  vsprintf(buf, query, args);
+  vsprintf (buf, query, args);
   Tcl_VarEval (interp, "gdbtk_tcl_query ", "{", buf, "}", NULL);
 
   val = atol (interp->result);
   return val;
 }
 
+static void
+dsprintf_append_element (va_alist)
+     va_dcl
+{
+  va_list args;
+  Tcl_DString *dsp;
+  char *format;
+  char buf[1024];
+
+  va_start (args);
+
+  dsp = va_arg (args, Tcl_DString *);
+  format = va_arg (args, char *);
+
+  vsprintf (buf, format, args);
+
+  Tcl_DStringAppendElement (dsp, buf);
+}
+
+static int
+gdb_get_breakpoint_list (clientData, interp, argc, argv)
+     ClientData clientData;
+     Tcl_Interp *interp;
+     int argc;
+     char *argv[];
+{
+  struct breakpoint *b;
+  extern struct breakpoint *breakpoint_chain;
+
+  if (argc != 1)
+    error ("wrong # args");
+
+  for (b = breakpoint_chain; b; b = b->next)
+    if (b->type == bp_breakpoint)
+      dsprintf_append_element (result_ptr, "%d", b->number);
+
+  return TCL_OK;
+}
+
+static int
+gdb_get_breakpoint_info (clientData, interp, argc, argv)
+     ClientData clientData;
+     Tcl_Interp *interp;
+     int argc;
+     char *argv[];
+{
+  struct symtab_and_line sal;
+  static char *bptypes[] = {"breakpoint", "hardware breakpoint", "until",
+			      "finish", "watchpoint", "hardware watchpoint",
+			      "read watchpoint", "access watchpoint",
+			      "longjmp", "longjmp resume", "step resume",
+			      "through sigtramp", "watchpoint scope",
+			      "call dummy" };
+  static char *bpdisp[] = {"delete", "disable", "donttouch"};
+  struct command_line *cmd;
+  int bpnum;
+  struct breakpoint *b;
+  extern struct breakpoint *breakpoint_chain;
+
+  if (argc != 2)
+    error ("wrong # args");
+
+  bpnum = atoi (argv[1]);
+
+  for (b = breakpoint_chain; b; b = b->next)
+    if (b->number == bpnum)
+      break;
+
+  if (!b)
+    error ("Breakpoint #%d does not exist", bpnum);
+
+  if (b->type != bp_breakpoint)
+    return;
+
+  sal = find_pc_line (b->address, 0);
+
+  Tcl_DStringAppendElement (result_ptr, symtab_to_filename (sal.symtab));
+  dsprintf_append_element (result_ptr, "%d", sal.line);
+  dsprintf_append_element (result_ptr, "0x%lx", b->address);
+  Tcl_DStringAppendElement (result_ptr, bptypes[b->type]);
+  Tcl_DStringAppendElement (result_ptr, b->enable == enabled ? "1" : "0");
+  Tcl_DStringAppendElement (result_ptr, bpdisp[b->disposition]);
+  dsprintf_append_element (result_ptr, "%d", b->silent);
+  dsprintf_append_element (result_ptr, "%d", b->ignore_count);
+
+  Tcl_DStringStartSublist (result_ptr);
+  for (cmd = b->commands; cmd; cmd = cmd->next)
+    Tcl_DStringAppendElement (result_ptr, cmd->line);
+  Tcl_DStringEndSublist (result_ptr);
+
+  Tcl_DStringAppendElement (result_ptr, b->cond_string);
+
+  dsprintf_append_element (result_ptr, "%d", b->thread);
+  dsprintf_append_element (result_ptr, "%d", b->hit_count);
+
+  return TCL_OK;
+}
+
 static void
 breakpoint_notify(b, action)
      struct breakpoint *b;
      const char *action;
 {
-  struct symbol *sym;
-  char bpnum[50], line[50], pc[50];
-  struct symtab_and_line sal;
-  char *filename;
+  char buf[100];
   int v;
 
   if (b->type != bp_breakpoint)
     return;
 
-  sal = find_pc_line (b->address, 0);
+  sprintf (buf, "gdbtk_tcl_breakpoint %s %d", action, b->number);
 
-  filename = symtab_to_filename (sal.symtab);
-
-  sprintf (bpnum, "%d", b->number);
-  sprintf (line, "%d", sal.line);
-  sprintf (pc, "0x%lx", b->address);
- 
-  v = Tcl_VarEval (interp,
-		   "gdbtk_tcl_breakpoint ",
-		   action,
-		   " ", bpnum,
-		   " ", filename ? filename : "{}",
-		   " ", line,
-		   " ", pc,
-		   NULL);
+  v = Tcl_Eval (interp, buf);
 
   if (v != TCL_OK)
     {
@@ -234,28 +261,21 @@ static void
 gdbtk_create_breakpoint(b)
      struct breakpoint *b;
 {
-  breakpoint_notify(b, "create");
+  breakpoint_notify (b, "create");
 }
 
 static void
 gdbtk_delete_breakpoint(b)
      struct breakpoint *b;
 {
-  breakpoint_notify(b, "delete");
+  breakpoint_notify (b, "delete");
 }
 
 static void
-gdbtk_enable_breakpoint(b)
+gdbtk_modify_breakpoint(b)
      struct breakpoint *b;
 {
-  breakpoint_notify(b, "enable");
-}
-
-static void
-gdbtk_disable_breakpoint(b)
-     struct breakpoint *b;
-{
-  breakpoint_notify(b, "disable");
+  breakpoint_notify (b, "modify");
 }
 
 /* This implements the TCL command `gdb_loc', which returns a list consisting
@@ -291,35 +311,29 @@ gdb_loc (clientData, interp, argc, argv)
       free (sals.sals);
 
       if (sals.nelts != 1)
-	{
-	  Tcl_SetResult (interp, "Ambiguous line spec", TCL_STATIC);
-	  return TCL_ERROR;
-	}
+	error ("Ambiguous line spec");
 
       pc = sal.pc;
     }
   else
-    {
-      Tcl_SetResult (interp, "wrong # args", TCL_STATIC);
-      return TCL_ERROR;
-    }
+    error ("wrong # args");
 
   if (sal.symtab)
-    Tcl_AppendElement (interp, sal.symtab->filename);
+    Tcl_DStringAppendElement (result_ptr, sal.symtab->filename);
   else
-    Tcl_AppendElement (interp, "");
+    Tcl_DStringAppendElement (result_ptr, "");
 
   find_pc_partial_function (pc, &funcname, NULL, NULL);
-  Tcl_AppendElement (interp, funcname);
+  Tcl_DStringAppendElement (result_ptr, funcname);
 
   filename = symtab_to_filename (sal.symtab);
-  Tcl_AppendElement (interp, filename);
+  Tcl_DStringAppendElement (result_ptr, filename);
 
   sprintf (buf, "%d", sal.line);
-  Tcl_AppendElement (interp, buf); /* line number */
+  Tcl_DStringAppendElement (result_ptr, buf); /* line number */
 
   sprintf (buf, "0x%lx", pc);
-  Tcl_AppendElement (interp, buf); /* PC */
+  Tcl_DStringAppendElement (result_ptr, buf); /* PC */
 
   return TCL_OK;
 }
@@ -338,10 +352,7 @@ gdb_eval (clientData, interp, argc, argv)
   value_ptr val;
 
   if (argc != 2)
-    {
-      Tcl_SetResult (interp, "wrong # args", TCL_STATIC);
-      return TCL_ERROR;
-    }
+    error ("wrong # args");
 
   expr = parse_expression (argv[1]);
 
@@ -349,17 +360,8 @@ gdb_eval (clientData, interp, argc, argv)
 
   val = evaluate_expression (expr);
 
-  start_saving_output ();	/* Start collecting stdout */
-
   val_print (VALUE_TYPE (val), VALUE_CONTENTS (val), VALUE_ADDRESS (val),
 	     gdb_stdout, 0, 0, 0, 0);
-#if 0
-  value_print (val, gdb_stdout, 0, 0);
-#endif
-
-  Tcl_AppendElement (interp, get_saved_output ());
-
-  finish_saving_output ();	/* Set stdout back to normal */
 
   do_cleanups (old_chain);
 
@@ -383,25 +385,19 @@ gdb_sourcelines (clientData, interp, argc, argv)
   char buf[100];
 
   if (argc != 2)
-    {
-      Tcl_SetResult (interp, "wrong # args", TCL_STATIC);
-      return TCL_ERROR;
-    }
+    error ("wrong # args");
 
   symtab = lookup_symtab (argv[1]);
 
   if (!symtab)
-    {
-      Tcl_SetResult (interp, "No such file", TCL_STATIC);
-      return TCL_ERROR;
-    }
+    error ("No such file");
 
   /* If there's no linetable, or no entries, then we are done. */
 
   if (!symtab->linetable
       || symtab->linetable->nitems == 0)
     {
-      Tcl_AppendElement (interp, "");
+      Tcl_DStringAppendElement (result_ptr, "");
       return TCL_OK;
     }
 
@@ -417,7 +413,7 @@ gdb_sourcelines (clientData, interp, argc, argv)
 	continue;
 
       sprintf (buf, "%d", le->line);
-      Tcl_AppendElement (interp, buf);
+      Tcl_DStringAppendElement (result_ptr, buf);
     }
 
   return TCL_OK;
@@ -427,7 +423,7 @@ static int
 map_arg_registers (argc, argv, func, argp)
      int argc;
      char *argv[];
-     int (*func) PARAMS ((int regnum, void *argp));
+     void (*func) PARAMS ((int regnum, void *argp));
      void *argp;
 {
   int regnum;
@@ -461,22 +457,18 @@ map_arg_registers (argc, argv, func, argp)
 	  && *reg_names[regnum] != '\000')
 	func (regnum, argp);
       else
-	{
-	  Tcl_SetResult (interp, "bad register number", TCL_STATIC);
-
-	  return TCL_ERROR;
-	}
+	error ("bad register number");
     }
 
   return TCL_OK;
 }
 
-static int
+static void
 get_register_name (regnum, argp)
      int regnum;
      void *argp;		/* Ignored */
 {
-  Tcl_AppendElement (interp, reg_names[regnum]);
+  Tcl_DStringAppendElement (result_ptr, reg_names[regnum]);
 }
 
 /* This implements the TCL command `gdb_regnames', which returns a list of
@@ -507,8 +499,9 @@ gdb_regnames (clientData, interp, argc, argv)
 #define INVALID_FLOAT(x, y) (0 != 0)
 #endif
 
-static int
+static void
 get_register (regnum, fp)
+     int regnum;
      void *fp;
 {
   char raw_buffer[MAX_REGISTER_RAW_SIZE];
@@ -517,12 +510,10 @@ get_register (regnum, fp)
 
   if (read_relative_register_raw_bytes (regnum, raw_buffer))
     {
-      Tcl_AppendElement (interp, "Optimized out");
+      Tcl_DStringAppendElement (result_ptr, "Optimized out");
       return;
     }
 
-  start_saving_output ();	/* Start collecting stdout */
-
   /* Convert raw data to virtual format if necessary.  */
 
   if (REGISTER_CONVERTIBLE (regnum))
@@ -536,9 +527,7 @@ get_register (regnum, fp)
   val_print (REGISTER_VIRTUAL_TYPE (regnum), virtual_buffer, 0,
 	     gdb_stdout, format, 1, 0, Val_pretty_default);
 
-  Tcl_AppendElement (interp, get_saved_output ());
-
-  finish_saving_output ();	/* Set stdout back to normal */
+  Tcl_DStringAppend (result_ptr, " ", -1);
 }
 
 static int
@@ -551,10 +540,7 @@ gdb_fetch_registers (clientData, interp, argc, argv)
   int format;
 
   if (argc < 2)
-    {
-      Tcl_SetResult (interp, "wrong # args", TCL_STATIC);
-      return TCL_ERROR;
-    }
+    error ("wrong # args");
 
   argc--;
   argv++;
@@ -570,8 +556,9 @@ gdb_fetch_registers (clientData, interp, argc, argv)
 
 static char old_regs[REGISTER_BYTES];
 
-static int
+static void
 register_changed_p (regnum, argp)
+     int regnum;
      void *argp;		/* Ignored */
 {
   char raw_buffer[MAX_REGISTER_RAW_SIZE];
@@ -590,7 +577,7 @@ register_changed_p (regnum, argp)
 	  REGISTER_RAW_SIZE (regnum));
 
   sprintf (buf, "%d", regnum);
-  Tcl_AppendElement (interp, buf);
+  Tcl_DStringAppendElement (result_ptr, buf);
 }
 
 static int
@@ -600,8 +587,6 @@ gdb_changed_register_list (clientData, interp, argc, argv)
      int argc;
      char *argv[];
 {
-  int format;
-
   argc--;
   argv++;
 
@@ -619,19 +604,12 @@ gdb_cmd (clientData, interp, argc, argv)
      char *argv[];
 {
   if (argc != 2)
-    {
-      Tcl_SetResult (interp, "wrong # args", TCL_STATIC);
-      return TCL_ERROR;
-    }
+    error ("wrong # args");
 
   execute_command (argv[1], 1);
 
   bpstat_do_actions (&stop_bpstat);
 
-  /* Drain all buffered command output */
-
-  gdb_flush (gdb_stdout);
-
   return TCL_OK;
 }
 
@@ -653,6 +631,11 @@ call_wrapper (clientData, interp, argc, argv)
   struct cleanup *saved_cleanup_chain;
   Tcl_CmdProc *func;
   jmp_buf saved_error_return;
+  Tcl_DString result, *old_result_ptr;
+
+  Tcl_DStringInit (&result);
+  old_result_ptr = result_ptr;
+  result_ptr = &result;
 
   func = (Tcl_CmdProc *)clientData;
   memcpy (saved_error_return, error_return, sizeof (jmp_buf));
@@ -665,8 +648,6 @@ call_wrapper (clientData, interp, argc, argv)
     {
       val = TCL_ERROR;		/* Flag an error for TCL */
 
-      finish_saving_output ();	/* Restore stdout to normal */
-
       gdb_flush (gdb_stderr);	/* Flush error output */
 
       gdb_flush (gdb_stdout);	/* Sometimes error output comes here as well */
@@ -683,6 +664,9 @@ call_wrapper (clientData, interp, argc, argv)
 
   memcpy (error_return, saved_error_return, sizeof (jmp_buf));
 
+  Tcl_DStringResult (interp, &result);
+  result_ptr = old_result_ptr;
+
   return val;
 }
 
@@ -693,16 +677,15 @@ gdb_listfiles (clientData, interp, argc, argv)
      int argc;
      char *argv[];
 {
-  int val;
   struct objfile *objfile;
   struct partial_symtab *psymtab;
   struct symtab *symtab;
 
   ALL_PSYMTABS (objfile, psymtab)
-    Tcl_AppendElement (interp, psymtab->filename);
+    Tcl_DStringAppendElement (result_ptr, psymtab->filename);
 
   ALL_SYMTABS (objfile, symtab)
-    Tcl_AppendElement (interp, symtab->filename);
+    Tcl_DStringAppendElement (result_ptr, symtab->filename);
 
   return TCL_OK;
 }
@@ -793,32 +776,21 @@ gdb_disassemble (clientData, interp, argc, argv)
     };
 
   if (argc != 3 && argc != 4)
-    {
-      Tcl_SetResult (interp, "wrong # args", TCL_STATIC);
-      return TCL_ERROR;
-    }
+    error ("wrong # args");
 
   if (strcmp (argv[1], "source") == 0)
     mixed_source_and_assembly = 1;
   else if (strcmp (argv[1], "nosource") == 0)
     mixed_source_and_assembly = 0;
   else
-    {
-      Tcl_SetResult (interp, "First arg must be 'source' or 'nosource'",
-		     TCL_STATIC);
-      return TCL_ERROR;
-    }
+    error ("First arg must be 'source' or 'nosource'");
 
   low = parse_and_eval_address (argv[2]);
 
   if (argc == 3)
     {
       if (find_pc_partial_function (low, NULL, &low, &high) == 0)
-	{
-	  Tcl_SetResult (interp, "No function contains specified address",
-			 TCL_STATIC);
-	  return TCL_ERROR;
-	}
+	error ("No function contains specified address");
     }
   else
     high = parse_and_eval_address (argv[3]);
@@ -1086,8 +1058,6 @@ gdbtk_init ()
   int i;
   struct sigaction action;
   static sigset_t nullsigmask = {0};
-  extern struct cmd_list_element *setlist;
-  extern struct cmd_list_element *showlist;
 
   old_chain = make_cleanup (cleanup_init, 0);
 
@@ -1098,8 +1068,6 @@ gdbtk_init ()
   if (!interp)
     error ("Tcl_CreateInterp failed");
 
-  Tcl_DStringInit (&stdout_buffer); /* Setup stdout buffer */
-
   mainWindow = Tk_CreateMainWindow (interp, NULL, "gdb", "Gdb");
 
   if (!mainWindow)
@@ -1126,6 +1094,10 @@ gdbtk_init ()
   Tcl_CreateCommand (interp, "gdb_disassemble", call_wrapper,
 		     gdb_disassemble, NULL);
   Tcl_CreateCommand (interp, "gdb_eval", call_wrapper, gdb_eval, NULL);
+  Tcl_CreateCommand (interp, "gdb_get_breakpoint_list", call_wrapper,
+		     gdb_get_breakpoint_list, NULL);
+  Tcl_CreateCommand (interp, "gdb_get_breakpoint_info", call_wrapper,
+		     gdb_get_breakpoint_info, NULL);
 
   command_loop_hook = Tk_MainLoop;
   print_frame_info_listing_hook = null_routine;
@@ -1133,8 +1105,7 @@ gdbtk_init ()
   flush_hook = gdbtk_flush;
   create_breakpoint_hook = gdbtk_create_breakpoint;
   delete_breakpoint_hook = gdbtk_delete_breakpoint;
-  enable_breakpoint_hook = gdbtk_enable_breakpoint;
-  disable_breakpoint_hook = gdbtk_disable_breakpoint;
+  modify_breakpoint_hook = gdbtk_modify_breakpoint;
   interactive_hook = gdbtk_interactive;
   target_wait_hook = gdbtk_wait;
   call_command_hook = gdbtk_call_command;
@@ -1166,13 +1137,6 @@ gdbtk_init ()
   add_com ("tk", class_obscure, tk_command,
 	   "Send a command directly into tk.");
 
-#if 0
-  add_show_from_set (add_set_cmd ("disassemble-from-exec", class_support,
-				  var_boolean, (char *)&disassemble_from_exec,
-				  "Set ", &setlist),
-		     &showlist);
-#endif
-
   Tcl_LinkVar (interp, "disassemble-from-exec", (char *)&disassemble_from_exec,
 	       TCL_LINK_INT);
 
@@ -1192,8 +1156,6 @@ gdbtk_init ()
 
   if (Tcl_EvalFile (interp, gdbtk_filename) != TCL_OK)
     {
-      char *err;
-
       fputs_unfiltered_hook = NULL; /* Force errors to stdout/stderr */
 
       fprintf_unfiltered (stderr, "%s:%d: %s\n", gdbtk_filename,
diff --git a/gdb/gdbtk.tcl b/gdb/gdbtk.tcl
index 9af60a69fb5..15839d47f09 100644
--- a/gdb/gdbtk.tcl
+++ b/gdb/gdbtk.tcl
@@ -26,7 +26,6 @@ set current_label {}
 set screen_height 0
 set screen_top 0
 set screen_bot 0
-set current_output_win .cmd.text
 set cfunc NIL
 set line_numbers 1
 set breakpoint_file(-1) {[garbage]}
@@ -65,10 +64,8 @@ if [info exists env(EDITOR)] then {
 #
 
 proc gdbtk_tcl_fputs {arg} {
-	global current_output_win
-
-	$current_output_win insert end "$arg"
-	$current_output_win yview -pickplace end
+	.cmd.text insert end "$arg"
+	.cmd.text yview -pickplace end
 }
 
 proc gdbtk_tcl_fputs_error {arg} {
@@ -87,9 +84,7 @@ proc gdbtk_tcl_fputs_error {arg} {
 #
 
 proc gdbtk_tcl_flush {} {
-	global current_output_win
-
-	$current_output_win yview -pickplace end
+	.cmd.text yview -pickplace end
 	update idletasks
 }
 
@@ -149,18 +144,179 @@ proc gdbtk_tcl_end_variable_annotation {} {
 #	of:
 #		create		- Notify of breakpoint creation
 #		delete		- Notify of breakpoint deletion
-#		enable		- Notify of breakpoint enabling
-#		disable		- Notify of breakpoint disabling
-#
-#	All actions take the same set of arguments:  BPNUM is the breakpoint
-#	number,  FILE is the source file and LINE is the line number, and PC is
-#	the pc of the affected breakpoint.
+#		modify		- Notify of breakpoint modification
 #
 
-proc gdbtk_tcl_breakpoint {action bpnum file line pc} {
+# file line pc type enabled disposition silent ignore_count commands cond_string thread hit_count
+
+proc gdbtk_tcl_breakpoint {action bpnum} {
+	set bpinfo [gdb_get_breakpoint_info $bpnum]
+	set file [lindex $bpinfo 0]
+	set line [lindex $bpinfo 1]
+	set pc [lindex $bpinfo 2]
+	set enable [lindex $bpinfo 4]
+
+	if {$action == "modify"} {
+		if {$enable == "enabled"} {
+			set action enable
+		} else {
+			set action disable
+		}
+	}
+
 	${action}_breakpoint $bpnum $file $line $pc
 }
 
+proc create_breakpoints_window {} {
+	global bpframe_lasty
+
+	if [winfo exists .breakpoints] {raise .breakpoints ; return}
+
+	build_framework .breakpoints "Breakpoints" ""
+
+# First, delete all the old view menu entries
+
+	.breakpoints.menubar.view.menu delete 0 last
+
+# Get rid of label
+
+	destroy .breakpoints.label
+
+# Replace text with a canvas and fix the scrollbars
+
+	destroy .breakpoints.text
+	canvas .breakpoints.c -relief sunken -bd 2 \
+		-cursor hand2 -yscrollcommand {.breakpoints.scroll set}
+	.breakpoints.scroll configure -command {.breakpoints.c yview}
+	scrollbar .breakpoints.scrollx -orient horizontal \
+		-command {.breakpoints.c xview} -relief sunken
+
+	pack .breakpoints.scrollx -side bottom -fill x -in .breakpoints.info
+	pack .breakpoints.c -side left -expand yes -fill both \
+		-in .breakpoints.info
+
+	set bpframe_lasty 0
+
+# Create a frame for each breakpoint
+
+	foreach bpnum [gdb_get_breakpoint_list] {
+		add_breakpoint_frame $bpnum
+	}
+}
+
+# Create a frame for bpnum in the .breakpoints canvas
+
+proc add_breakpoint_frame bpnum {
+	global bpframe_lasty
+
+	if ![winfo exists .breakpoints] return
+
+	set bpinfo [gdb_get_breakpoint_info $bpnum]
+
+	set file [lindex $bpinfo 0]
+	set line [lindex $bpinfo 1]
+	set pc [lindex $bpinfo 2]
+	set type [lindex $bpinfo 3]
+	set enabled [lindex $bpinfo 4]
+	set disposition [lindex $bpinfo 5]
+	set silent [lindex $bpinfo 6]
+	set ignore_count [lindex $bpinfo 7]
+	set commands [lindex $bpinfo 8]
+	set cond [lindex $bpinfo 9]
+	set thread [lindex $bpinfo 10]
+	set hit_count [lindex $bpinfo 11]
+
+	set f .breakpoints.c.$bpnum
+
+	if ![winfo exists $f] {
+		frame $f -relief sunken -bd 2
+
+		label $f.id -text "#$bpnum     $file:$line    ($pc)" \
+			-relief flat -bd 2 -anchor w
+		label $f.hit_count -text "Hit count: $hit_count" -relief flat \
+			-bd 2 -anchor w
+
+		frame $f.thread
+		label $f.thread.label -text "Thread: " -relief flat -bd 2 \
+			-width 11 -anchor w
+		entry $f.thread.entry -bd 2 -relief sunken -width 10
+		$f.thread.entry insert end $thread
+		pack $f.thread.label -side left
+		pack $f.thread.entry -side left -fill x
+
+		frame $f.cond
+		label $f.cond.label -text "Condition: " -relief flat -bd 2 \
+			-width 11 -anchor w
+		entry $f.cond.entry -bd 2 -relief sunken
+		$f.cond.entry insert end $cond
+		pack $f.cond.label -side left
+		pack $f.cond.entry -side left -fill x -expand yes
+
+		frame $f.ignore_count
+		label $f.ignore_count.label -text "Ignore count: " \
+			-relief flat -bd 2 -width 11 -anchor w
+		entry $f.ignore_count.entry -bd 2 -relief sunken -width 10
+		$f.ignore_count.entry insert end $ignore_count
+		pack $f.ignore_count.label -side left
+		pack $f.ignore_count.entry -side left -fill x
+
+		frame $f.disps
+
+		checkbutton $f.disps.enabled -text "Enabled " \
+			-variable enabled -anchor w -relief flat
+
+		radiobutton $f.disps.delete -text Delete \
+			-variable disposition -anchor w -relief flat
+
+		radiobutton $f.disps.disable -text Disable \
+			-variable disposition -anchor w -relief flat
+
+		radiobutton $f.disps.donttouch -text "Leave alone" \
+				 -variable disposition -anchor w -relief flat
+
+		pack  $f.disps.delete $f.disps.disable $f.disps.donttouch \
+			-side left -anchor w
+		pack $f.disps.enabled -side right -anchor e
+		text $f.commands -relief sunken -bd 2 -setgrid true \
+			-cursor hand2 -height 3 -width 30
+
+		foreach line $commands {
+				$f.commands insert end "${line}\n"
+		}
+
+		pack $f.id -side top -anchor nw -fill x
+		pack $f.hit_count $f.cond $f.thread $f.ignore_count $f.disps \
+				$f.commands -side top -fill x -anchor nw
+	}
+
+	set tag [.breakpoints.c create window 0 $bpframe_lasty -window $f -anchor nw]
+	update
+	set bbox [.breakpoints.c bbox $tag]
+
+	set bpframe_lasty [lindex $bbox 3]
+}
+
+# Delete a breakpoint frame
+
+proc delete_breakpoint_frame bpnum {
+	global bpframe_lasty
+
+	if ![winfo exists .breakpoints] return
+
+# First, clear the canvas
+
+	.breakpoints.c delete all
+
+# Now, repopulate it with all but the doomed breakpoint
+
+	set bpframe_lasty 0
+	foreach bp [gdb_get_breakpoint_list] {
+		if {$bp != $bpnum} {
+			add_breakpoint_frame $bp
+		}
+	}
+}
+
 proc asm_win_name {funcname} {
 	if {$funcname == "*None*"} {return .asm.text}
 
@@ -219,6 +375,10 @@ proc create_breakpoint {bpnum file line pc} {
 	if [winfo exists $win] {
 		insert_breakpoint_tag $win [pc_to_line $pclist($cfunc) $pc]
 	}
+
+# Update the breakpoints window
+
+	add_breakpoint_frame $bpnum
 }
 
 #
@@ -282,6 +442,8 @@ proc delete_breakpoint {bpnum file line pc} {
 			}
 		}
 	}
+
+	delete_breakpoint_frame $bpnum
 }
 
 #
@@ -389,51 +551,51 @@ proc delete_breakpoint_tag {win line} {
 
 proc gdbtk_tcl_busy {} {
 	if [winfo exists .src] {
-		catch {.src.start configure -state disabled}
-		catch {.src.stop configure -state normal}
-		catch {.src.step configure -state disabled}
-		catch {.src.next configure -state disabled}
-		catch {.src.continue configure -state disabled}
-		catch {.src.finish configure -state disabled}
-		catch {.src.up configure -state disabled}
-		catch {.src.down configure -state disabled}
-		catch {.src.bottom configure -state disabled}
+		.src.start configure -state disabled
+		.src.stop configure -state normal
+		.src.step configure -state disabled
+		.src.next configure -state disabled
+		.src.continue configure -state disabled
+		.src.finish configure -state disabled
+		.src.up configure -state disabled
+		.src.down configure -state disabled
+		.src.bottom configure -state disabled
 	}
 	if [winfo exists .asm] {
-		catch {.asm.stepi configure -state disabled}
-		catch {.asm.nexti configure -state disabled}
-		catch {.asm.continue configure -state disabled}
-		catch {.asm.finish configure -state disabled}
-		catch {.asm.up configure -state disabled}
-		catch {.asm.down configure -state disabled}
-		catch {.asm.bottom configure -state disabled}
-		catch {.asm.close configure -state disabled}
+		.asm.stepi configure -state disabled
+		.asm.nexti configure -state disabled
+		.asm.continue configure -state disabled
+		.asm.finish configure -state disabled
+		.asm.up configure -state disabled
+		.asm.down configure -state disabled
+		.asm.bottom configure -state disabled
 	}
+	return
 }
 
 proc gdbtk_tcl_idle {} {
 	if [winfo exists .src] {
-		catch {.src.start configure -state normal}
-		catch {.src.stop configure -state disabled}
-		catch {.src.step configure -state normal}
-		catch {.src.next configure -state normal}
-		catch {.src.continue configure -state normal}
-		catch {.src.finish configure -state normal}
-		catch {.src.up configure -state normal}
-		catch {.src.down configure -state normal}
-		catch {.src.bottom configure -state normal}
+		.src.start configure -state normal
+		.src.stop configure -state disabled
+		.src.step configure -state normal
+		.src.next configure -state normal
+		.src.continue configure -state normal
+		.src.finish configure -state normal
+		.src.up configure -state normal
+		.src.down configure -state normal
+		.src.bottom configure -state normal
 	}
 
 	if [winfo exists .asm] {
-		catch {.asm.stepi configure -state normal}
-		catch {.asm.nexti configure -state normal}
-		catch {.asm.continue configure -state normal}
-		catch {.asm.finish configure -state normal}
-		catch {.asm.up configure -state normal}
-		catch {.asm.down configure -state normal}
-		catch {.asm.bottom configure -state normal}
-		catch {.asm.close configure -state normal}
+		.asm.stepi configure -state normal
+		.asm.nexti configure -state normal
+		.asm.continue configure -state normal
+		.asm.finish configure -state normal
+		.asm.up configure -state normal
+		.asm.down configure -state normal
+		.asm.bottom configure -state normal
 	}
+	return
 }
 
 #
@@ -499,6 +661,17 @@ menu .file_popup -cursor hand2
 .file_popup add command -label "Edit" -command {exec $editor +$selected_line $selected_file &}
 .file_popup add command -label "Set breakpoint" -command {gdb_cmd "break $selected_file:$selected_line"}
 
+# Use this procedure to get the GDB core to execute the string `cmd'.  This is
+# a wrapper around gdb_cmd, which will catch errors, and send output to the
+# command window.  It will also cause all of the other windows to be updated.
+
+proc interactive_cmd {cmd} {
+	catch {gdb_cmd "$cmd"} result
+	.cmd.text insert end $result
+	.cmd.text yview -pickplace end
+	update_ptr
+}
+
 #
 # Bindings:
 #
@@ -730,7 +903,7 @@ proc not_implemented_yet {message} {
 ##
 # Local procedure:
 #
-#	create_expr_win - Create expression display window
+#	create_expr_window - Create expression display window
 #
 # Description:
 #
@@ -818,7 +991,7 @@ proc update_exprs {} {
 	}
 }
 
-proc create_expr_win {} {
+proc create_expr_window {} {
 
 	if [winfo exists .expr] {raise .expr ; return}
 
@@ -875,7 +1048,7 @@ proc create_expr_win {} {
 #
 
 proc display_expression {expression} {
-	create_expr_win
+	create_expr_window
 
 	add_expr $expression
 }
@@ -915,7 +1088,7 @@ proc create_file_win {filename debug_file} {
 # File can't be read.  Put error message into .src.nofile window and return.
 
 		catch {destroy .src.nofile}
-		text .src.nofile -height 25 -width 88 -relief raised \
+		text .src.nofile -height 25 -width 88 -relief sunken \
 			-borderwidth 2 -yscrollcommand textscrollproc \
 			-setgrid true -cursor hand2
 		.src.nofile insert 0.0 $fh
@@ -927,22 +1100,21 @@ proc create_file_win {filename debug_file} {
 
 # Actually create and do basic configuration on the text widget.
 
-	text $win -height 25 -width 88 -relief raised -borderwidth 2 \
+	text $win -height 25 -width 88 -relief sunken -borderwidth 2 \
 		-yscrollcommand textscrollproc -setgrid true -cursor hand2
 
 # Setup all the bindings
 
 	bind $win <Enter> {focus %W}
-#	bind $win <1> {listing_window_button_1 %W %X %Y %x %y}
 	bind $win <1> do_nothing
 	bind $win <B1-Motion> do_nothing
 
-	bind $win n {catch {gdb_cmd next} ; update_ptr}
-	bind $win s {catch {gdb_cmd step} ; update_ptr}
-	bind $win c {catch {gdb_cmd continue} ; update_ptr}
-	bind $win f {catch {gdb_cmd finish} ; update_ptr}
-	bind $win u {catch {gdb_cmd up} ; update_ptr}
-	bind $win d {catch {gdb_cmd down} ; update_ptr}
+	bind $win n {interactive_cmd next}
+	bind $win s {interactive_cmd step}
+	bind $win c {interactive_cmd continue}
+	bind $win f {interactive_cmd finish}
+	bind $win u {interactive_cmd up}
+	bind $win d {interactive_cmd down}
 
 	$win delete 0.0 end
 	$win insert 0.0 [read $fh]
@@ -972,7 +1144,7 @@ proc create_file_win {filename debug_file} {
 		$win tag add margin $i.0 $i.8
 		}
 
-#	$win tag bind margin <1> {listing_window_button_1 %W %X %Y %x %y}
+	$win tag bind margin <1> {listing_window_button_1 %W %X %Y %x %y}
 	$win tag bind source <1> {
 		%W mark set anchor "@%x,%y wordstart"
 		set last [%W index "@%x,%y wordend"]
@@ -1032,7 +1204,6 @@ proc create_file_win {filename debug_file} {
 proc create_asm_win {funcname pc} {
 	global breakpoint_file
 	global breakpoint_line
-	global current_output_win
 	global pclist
 	global disassemble_with_source
 
@@ -1043,7 +1214,7 @@ proc create_asm_win {funcname pc} {
 
 # Actually create and do basic configuration on the text widget.
 
-	text $win -height 25 -width 80 -relief raised -borderwidth 2 \
+	text $win -height 25 -width 80 -relief sunken -borderwidth 2 \
 		-setgrid true -cursor hand2 -yscrollcommand asmscrollproc
 
 # Setup all the bindings
@@ -1051,19 +1222,16 @@ proc create_asm_win {funcname pc} {
 	bind $win <Enter> {focus %W}
 	bind $win <1> {asm_window_button_1 %W %X %Y %x %y}
 	bind $win <B1-Motion> do_nothing
-	bind $win n {catch {gdb_cmd nexti} ; update_ptr}
-	bind $win s {catch {gdb_cmd stepi} ; update_ptr}
-	bind $win c {catch {gdb_cmd continue} ; update_ptr}
-	bind $win f {catch {gdb_cmd finish} ; update_ptr}
-	bind $win u {catch {gdb_cmd up} ; update_ptr}
-	bind $win d {catch {gdb_cmd down} ; update_ptr}
+	bind $win n {interactive_cmd nexti}
+	bind $win s {interactive_cmd stepi}
+	bind $win c {interactive_cmd continue}
+	bind $win f {interactive_cmd finish}
+	bind $win u {interactive_cmd up}
+	bind $win d {interactive_cmd down}
 
 # Disassemble the code, and read it into the new text widget
 
-	set temp $current_output_win
-	set current_output_win $win
-	catch "gdb_disassemble $disassemble_with_source $pc"
-	set current_output_win $temp
+	$win insert end [gdb_disassemble $disassemble_with_source $pc]
 
 	set numlines [$win index end]
 	set numlines [lindex [split $numlines .] 0]
@@ -1272,18 +1440,18 @@ proc create_asm_window {} {
 	frame .asm.row2
 
 	button .asm.stepi -width 6 -text Stepi \
-		-command {catch {gdb_cmd stepi} ; update_ptr}
+		-command {interactive_cmd stepi}
 	button .asm.nexti -width 6 -text Nexti \
-		-command {catch {gdb_cmd nexti} ; update_ptr}
+		-command {interactive_cmd nexti}
 	button .asm.continue -width 6 -text Cont \
-		-command {catch {gdb_cmd continue} ; update_ptr}
+		-command {interactive_cmd continue}
 	button .asm.finish -width 6 -text Finish \
-		-command {catch {gdb_cmd finish} ; update_ptr}
-	button .asm.up -width 6 -text Up -command {catch {gdb_cmd up} ; update_ptr}
+		-command {interactive_cmd finish}
+	button .asm.up -width 6 -text Up -command {interactive_cmd up}
 	button .asm.down -width 6 -text Down \
-		-command {catch {gdb_cmd down} ; update_ptr}
+		-command {interactive_cmd down}
 	button .asm.bottom -width 6 -text Bottom \
-		-command {catch {gdb_cmd {frame 0}} ; update_ptr}
+		-command {interactive_cmd {frame 0}}
 
 	pack .asm.stepi .asm.continue .asm.up .asm.bottom -side left -padx 3 -pady 5 -in .asm.row1
 	pack .asm.nexti .asm.finish .asm.down -side left -padx 3 -pady 5 -in .asm.row2
@@ -1691,6 +1859,9 @@ proc update_ptr {} {
 	if [winfo exists .expr] {
 		update_exprs
 	}
+	if [winfo exists .autocmd] {
+		update_autocmd
+	}
 }
 
 # Make toplevel window disappear
@@ -1703,10 +1874,10 @@ proc files_command {} {
 	wm minsize .files_window 1 1
 #	wm overrideredirect .files_window true
 	listbox .files_window.list -geometry 30x20 -setgrid true \
-		-yscrollcommand {.files_window.scroll set} -relief raised \
+		-yscrollcommand {.files_window.scroll set} -relief sunken \
 		-borderwidth 2
 	scrollbar .files_window.scroll -orient vertical \
-		-command {.files_window.list yview}
+		-command {.files_window.list yview} -relief sunken
 	button .files_window.close -text Close -command {destroy .files_window}
 	tk_listboxSingleSelect .files_window.list
 
@@ -1789,25 +1960,25 @@ proc build_framework {win {title GDBtk} {label {}}} {
 		-command "destroy ${win}"
 	${win}.menubar.file.menu add separator
 	${win}.menubar.file.menu add command -label Quit \
-		-command { catch { gdb_cmd quit } }
+		-command {interactive_cmd quit}
 
 	menubutton ${win}.menubar.commands -padx 12 -text Commands \
 		-menu ${win}.menubar.commands.menu -underline 0
 
 	menu ${win}.menubar.commands.menu
 	${win}.menubar.commands.menu add command -label Run \
-		-command { catch  {gdb_cmd run } ; update_ptr }
+		-command {interactive_cmd run}
 	${win}.menubar.commands.menu add command -label Step \
-		-command { catch { gdb_cmd step } ; update_ptr }
+		-command {interactive_cmd step}
 	${win}.menubar.commands.menu add command -label Next \
-		-command { catch { gdb_cmd next } ; update_ptr }
+		-command {interactive_cmd next}
 	${win}.menubar.commands.menu add command -label Continue \
-		-command { catch { gdb_cmd continue } ; update_ptr }
+		-command {interactive_cmd continue}
 	${win}.menubar.commands.menu add separator
 	${win}.menubar.commands.menu add command -label Stepi \
-		-command { catch { gdb_cmd stepi } ; update_ptr }
+		-command {interactive_cmd stepi}
 	${win}.menubar.commands.menu add command -label Nexti \
-		-command { catch { gdb_cmd nexti } ; update_ptr }
+		-command {interactive_cmd nexti}
 
 	menubutton ${win}.menubar.view -padx 12 -text Options \
 		-menu ${win}.menubar.view.menu -underline 0
@@ -1828,14 +1999,18 @@ proc build_framework {win {title GDBtk} {label {}}} {
 		-command create_command_window
 	${win}.menubar.window.menu add separator
 	${win}.menubar.window.menu add command -label Source \
-		-command {create_source_window ; update_ptr}
+		-command create_source_window
 	${win}.menubar.window.menu add command -label Assembly \
-		-command {create_asm_window ; update_ptr}
+		-command create_asm_window
 	${win}.menubar.window.menu add separator
 	${win}.menubar.window.menu add command -label Registers \
-		-command {create_registers_window ; update_ptr}
+		-command create_registers_window
 	${win}.menubar.window.menu add command -label Expressions \
-		-command {create_expr_win ; update_ptr}
+		-command create_expr_window
+	${win}.menubar.window.menu add command -label "Auto Command" \
+		-command create_autocmd_window
+#	${win}.menubar.window.menu add command -label Breakpoints \
+#		-command create_breakpoints_window
 
 #	${win}.menubar.window.menu add separator
 #	${win}.menubar.window.menu add command -label Files \
@@ -1863,13 +2038,14 @@ proc build_framework {win {title GDBtk} {label {}}} {
 	pack	${win}.menubar.help -side right
 
 	frame ${win}.info
-	text ${win}.text -height 25 -width 80 -relief raised -borderwidth 2 \
+	text ${win}.text -height 25 -width 80 -relief sunken -borderwidth 2 \
 		-setgrid true -cursor hand2 -yscrollcommand "${win}.scroll set"
 
 	set ${win}.label $label
-	label ${win}.label -textvariable ${win}.label -borderwidth 2 -relief raised
+	label ${win}.label -textvariable ${win}.label -borderwidth 2 -relief sunken
 
-	scrollbar ${win}.scroll -orient vertical -command "${win}.text yview"
+	scrollbar ${win}.scroll -orient vertical -command "${win}.text yview" \
+		-relief sunken
 
 	pack ${win}.label -side bottom -fill x -in ${win}.info
 	pack ${win}.scroll -side right -fill y -in ${win}.info
@@ -1911,26 +2087,25 @@ proc create_source_window {} {
 	frame .src.row2
 
 	button .src.start -width 6 -text Start -command \
-		{catch {gdb_cmd {break main}}
-		 catch {gdb_cmd {enable delete $bpnum}}
-		 catch {gdb_cmd run}
-		 update_ptr }
+		{interactive_cmd {break main}
+		 interactive_cmd {enable delete $bpnum}
+		 interactive_cmd run }
 	button .src.stop -width 6 -text Stop -fg red -activeforeground red \
 		-state disabled -command gdb_stop
 	button .src.step -width 6 -text Step \
-		-command {catch {gdb_cmd step} ; update_ptr}
+		-command {interactive_cmd step}
 	button .src.next -width 6 -text Next \
-		-command {catch {gdb_cmd next} ; update_ptr}
+		-command {interactive_cmd next}
 	button .src.continue -width 6 -text Cont \
-		-command {catch {gdb_cmd continue} ; update_ptr}
+		-command {interactive_cmd continue}
 	button .src.finish -width 6 -text Finish \
-		-command {catch {gdb_cmd finish} ; update_ptr}
+		-command {interactive_cmd finish}
 	button .src.up -width 6 -text Up \
-		-command {catch {gdb_cmd up} ; update_ptr}
+		-command {interactive_cmd up}
 	button .src.down -width 6 -text Down \
-		-command {catch {gdb_cmd down} ; update_ptr}
+		-command {interactive_cmd down}
 	button .src.bottom -width 6 -text Bottom \
-		-command {catch {gdb_cmd {frame 0}} ; update_ptr}
+		-command {interactive_cmd {frame 0}}
 
 	pack .src.start .src.step .src.continue .src.up .src.bottom \
 		-side left -padx 3 -pady 5 -in .src.row1
@@ -1950,6 +2125,50 @@ proc create_source_window {} {
 				    set screen_bot [lindex $args 3]}
 }
 
+proc update_autocmd {} {
+	global .autocmd.label
+	global accumulate_output
+
+	catch {gdb_cmd "${.autocmd.label}"} result
+	if !$accumulate_output { .autocmd.text delete 0.0 end }
+	.autocmd.text insert end $result
+	.autocmd.text yview -pickplace end
+}
+
+proc create_autocmd_window {} {
+	global .autocmd.label
+
+	if [winfo exists .autocmd] {raise .autocmd ; return}
+
+	build_framework .autocmd "Auto Command" ""
+
+# First, delete all the old view menu entries
+
+	.autocmd.menubar.view.menu delete 0 last
+
+# Accumulate output option
+
+	.autocmd.menubar.view.menu add checkbutton \
+		-variable accumulate_output \
+		-label "Accumulate output" -onvalue 1 -offvalue 0
+
+# Now, create entry widget with label
+
+	frame .autocmd.entryframe
+
+	entry .autocmd.entry -borderwidth 2 -relief sunken
+	bind .autocmd <Enter> {focus .autocmd.entry}
+	bind .autocmd.entry <Key-Return> {set .autocmd.label [.autocmd.entry get]
+					  .autocmd.entry delete 0 end }
+
+	label .autocmd.entrylab -text "Command: "
+
+	pack .autocmd.entrylab -in .autocmd.entryframe -side left
+	pack .autocmd.entry -in .autocmd.entryframe -side left -fill x -expand yes
+
+	pack .autocmd.entryframe -side bottom -fill x -before .autocmd.info
+}
+
 proc create_command_window {} {
 	global command_line
 
@@ -1978,10 +2197,13 @@ proc create_command_window {} {
 		global command_line
 
 		%W insert end \n
-		%W yview -pickplace end
-		catch "gdb_cmd [list $command_line]"
+		interactive_cmd $command_line
+
+#		%W yview -pickplace end
+#		catch "gdb_cmd [list $command_line]" result
+#		%W insert end $result
 		set command_line {}
-		update_ptr
+#		update_ptr
 		%W insert end "(gdb) "
 		%W yview -pickplace end
 		}
@@ -2682,23 +2904,16 @@ create_command_window
 
 # Create a copyright window
 
+update
 toplevel .c
 wm geometry .c +300+300
 wm overrideredirect .c true
 
-text .t
-set temp $current_output_win
-set current_output_win .t
-gdb_cmd "show version"
-set current_output_win $temp
-
-message .c.m -text [.t get 0.0 end] -aspect 500 -relief raised
-destroy .t
+message .c.m -text [gdb_cmd "show version"] -aspect 500 -relief raised
 pack .c.m
 bind .c.m <Leave> {destroy .c}
+update
 
 if [file exists ~/.gdbtkinit] {
 	source ~/.gdbtkinit
 }
-
-update
diff --git a/gdb/top.c b/gdb/top.c
index d958c166f2c..9bf018e79ef 100644
--- a/gdb/top.c
+++ b/gdb/top.c
@@ -395,8 +395,7 @@ void (*flush_hook) PARAMS ((FILE *stream));
 
 void (*create_breakpoint_hook) PARAMS ((struct breakpoint *bpt));
 void (*delete_breakpoint_hook) PARAMS ((struct breakpoint *bpt));
-void (*enable_breakpoint_hook) PARAMS ((struct breakpoint *bpt));
-void (*disable_breakpoint_hook) PARAMS ((struct breakpoint *bpt));
+void (*modify_breakpoint_hook) PARAMS ((struct breakpoint *bpt));
 
 /* Called during long calculations to allow GUI to repair window damage, and to
    check for stop buttons, etc... */