From: Luke Kenneth Casson Leighton Date: Sun, 30 Jun 2019 19:59:29 +0000 (+0100) Subject: update branch RVC X-Git-Tag: convert-csv-opcode-to-binary~4312 X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=656e39263541894e3634a1e476d997d9260bee10;p=libreriscv.git update branch RVC --- diff --git a/simple_v_extension/sv_prefix_proposal/discussion.rst b/simple_v_extension/sv_prefix_proposal/discussion.rst index 883a56a34..cc4438bd5 100644 --- a/simple_v_extension/sv_prefix_proposal/discussion.rst +++ b/simple_v_extension/sv_prefix_proposal/discussion.rst @@ -1,15 +1,23 @@ RVC === -The comment in the RVC section says that the Opcodes will be evaluated to see which are most useful to provide. +The comment in the RVC section says that the Opcodes will be evaluated +to see which are most useful to provide. -This takes a huge amount of time and, if not *exactly* RVC, would require a special decode engine, taking up extra gates as well as need time to develop. +This takes a huge amount of time and, if not *exactly* RVC, would require +a special decode engine, taking up extra gates as well as need time +to develop. -Far better to just embed RVC into the opcode and prefix it. This is inline with the strategic principle behind SV: "No new opcodes, only prefixed augmentation" +Far better to just embed RVC into the opcode and prefix it. This is +inline with the strategic principle behind SV: "No new opcodes, only +prefixed augmentation" -Taking an entire major 32 bit opcode (or two) seems logical (RV128 space). I type funct3 to specify the C type page, Imm 12 bits for the operation. +Taking an entire major 32 bit opcode (or two) seems logical (RV128 +space). I type funct3 to specify the C type page, Imm 12 bits for the +operation. -Or, just "to hell with it" and just take the entire opcode and stuff C into it, no regard for R/I/U/S and instead do whatever we like. +Or, just "to hell with it" and just take the entire opcode and stuff C +into it, no regard for R/I/U/S and instead do whatever we like. +----------+------+---------------------+---------------------+-------+--------+ @@ -95,6 +103,14 @@ Mapping P32-* Quadrants 0-2 to CUSTOM OPCODEs 0-2: | P32C RVC-Q2 | P32-* | RVC[15:2] | OPCODE-2 | +-------------+--------+-----------+----------+ +Notes: + +* Branch type requires 2 predicate registers as the second + is used to store the combined results of the comparisons + (not as twin-predication). The tpred field is therefore + used to determine whether x10 is enabled as the second + register. TDB, there may be a better (unique) encoding + Questions =========