From: Anton Blanchard Date: Sun, 13 Dec 2020 05:01:45 +0000 (+1100) Subject: Fully initialize FPU buses when FPU is disabled X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=659be2780ff2026c851b80d823b9238f8fb92465;p=microwatt.git Fully initialize FPU buses when FPU is disabled Some of the bits in the FPU buses end up as z state. Yosys flags them, so we may as well clean it up. Signed-off-by: Anton Blanchard --- diff --git a/common.vhdl b/common.vhdl index f91ac18..03cc942 100644 --- a/common.vhdl +++ b/common.vhdl @@ -471,6 +471,7 @@ package common is interrupt : std_ulogic; illegal : std_ulogic; end record; + constant FPUToExecute1Init : FPUToExecute1Type := (others => '0'); type FPUToWritebackType is record valid : std_ulogic; @@ -481,6 +482,7 @@ package common is write_cr_mask : std_ulogic_vector(7 downto 0); write_cr_data : std_ulogic_vector(31 downto 0); end record; + constant FPUToWritebackInit : FPUToWritebackType := (valid => '0', write_enable => '0', write_cr_enable => '0', others => (others => '0')); type DividerToExecute1Type is record valid: std_ulogic; diff --git a/core.vhdl b/core.vhdl index b905297..bc32a8c 100644 --- a/core.vhdl +++ b/core.vhdl @@ -350,13 +350,8 @@ begin no_fpu: if not HAS_FPU generate begin - fpu_to_execute1.busy <= '0'; - fpu_to_execute1.exception <= '0'; - fpu_to_execute1.interrupt <= '0'; - fpu_to_execute1.illegal <= '0'; - fpu_to_writeback.valid <= '0'; - fpu_to_writeback.write_enable <= '0'; - fpu_to_writeback.write_cr_enable <= '0'; + fpu_to_execute1 <= FPUToExecute1Init; + fpu_to_writeback <= FPUToWritebackInit; end generate; loadstore1_0: entity work.loadstore1