From: Fabio Estevam Date: Mon, 20 Feb 2017 11:57:36 +0000 (-0300) Subject: configs/mx6sx_udoo_neo: Bump to kernel 4.10 X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=689f3c5031e47a7923c50d8cdf8208cc94314c53;p=buildroot.git configs/mx6sx_udoo_neo: Bump to kernel 4.10 The imx6sx-udoo-neo dts patches have been upstreamed in kernel 4.10, so bump to this version and remove the local patches. Signed-off-by: Fabio Estevam Signed-off-by: Thomas Petazzoni --- diff --git a/board/udoo/neo/patches/linux/0001-udoo_neo_support.patch b/board/udoo/neo/patches/linux/0001-udoo_neo_support.patch deleted file mode 100644 index 2e8cea5d12..0000000000 --- a/board/udoo/neo/patches/linux/0001-udoo_neo_support.patch +++ /dev/null @@ -1,560 +0,0 @@ -From 76e691fc7653b85d390e58710e5c7db73ca49367 Mon Sep 17 00:00:00 2001 -From: Andreas Färber -Date: Sun, 16 Oct 2016 16:44:23 +0200 -Subject: ARM: dts: imx6sx: Add UDOO Neo support -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add initial device trees for UDOO Neo Basic, Extended and Full boards: -* Serial console is enabled, other serial ports are prepared. -* I2C based PMIC is enabled. -* Ethernet is enabled for Basic and Full. -* SDHC is enabled, with the SDIO_PWR GPIO modeled as a regulator. -* Both user LEDs are enabled, with the orange one reserved for the M4 - and with the SD card as default trigger for the red LED. - -The decision on a board compatible string is deferred to later. - -Cc: Ettore Chimenti -Signed-off-by: Andreas Färber -Signed-off-by: Shawn Guo ---- - arch/arm/boot/dts/Makefile | 5 +- - arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts | 69 ++++++ - arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts | 54 +++++ - arch/arm/boot/dts/imx6sx-udoo-neo-full.dts | 69 ++++++ - arch/arm/boot/dts/imx6sx-udoo-neo.dtsi | 293 +++++++++++++++++++++++++ - 5 files changed, 489 insertions(+), 1 deletion(-) - create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts - create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts - create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-full.dts - create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo.dtsi - -diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile -index 019976b..da0197d 100644 ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -417,7 +417,10 @@ dtb-$(CONFIG_SOC_IMX6SX) += \ - imx6sx-sabreauto.dtb \ - imx6sx-sdb-reva.dtb \ - imx6sx-sdb-sai.dtb \ -- imx6sx-sdb.dtb -+ imx6sx-sdb.dtb \ -+ imx6sx-udoo-neo-basic.dtb \ -+ imx6sx-udoo-neo-extended.dtb \ -+ imx6sx-udoo-neo-full.dtb - dtb-$(CONFIG_SOC_IMX6UL) += \ - imx6ul-14x14-evk.dtb \ - imx6ul-geam-kit.dtb \ -diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts -new file mode 100644 -index 0000000..0b88878 ---- /dev/null -+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts -@@ -0,0 +1,69 @@ -+/* -+ * Copyright (c) 2016 Andreas Färber -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This library is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This library is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+ -+#include "imx6sx-udoo-neo.dtsi" -+ -+/ { -+ model = "UDOO Neo Basic"; -+ compatible = "fsl,imx6sx"; -+ -+ memory { -+ reg = <0x80000000 0x20000000>; -+ }; -+}; -+ -+&fec1 { -+ phy-handle = <ðphy1>; -+ status = "okay"; -+ -+ mdio { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ ethphy1: ethernet-phy@0 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <0>; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts -new file mode 100644 -index 0000000..d6fdd17 ---- /dev/null -+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts -@@ -0,0 +1,54 @@ -+/* -+ * Copyright (c) 2016 Andreas Färber -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This library is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This library is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+ -+#include "imx6sx-udoo-neo.dtsi" -+ -+/ { -+ model = "UDOO Neo Extended"; -+ compatible = "fsl,imx6sx"; -+ -+ memory { -+ reg = <0x80000000 0x40000000>; -+ }; -+}; -diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts -new file mode 100644 -index 0000000..d8c3577 ---- /dev/null -+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts -@@ -0,0 +1,69 @@ -+/* -+ * Copyright (c) 2016 Andreas Färber -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This library is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This library is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+ -+#include "imx6sx-udoo-neo.dtsi" -+ -+/ { -+ model = "UDOO Neo Full"; -+ compatible = "fsl,imx6sx"; -+ -+ memory { -+ reg = <0x80000000 0x40000000>; -+ }; -+}; -+ -+&fec1 { -+ phy-handle = <ðphy1>; -+ status = "okay"; -+ -+ mdio { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ ethphy1: ethernet-phy@0 { -+ compatible = "ethernet-phy-ieee802.3-c22"; -+ reg = <0>; -+ }; -+ }; -+}; -diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi -new file mode 100644 -index 0000000..2b65d26 ---- /dev/null -+++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi -@@ -0,0 +1,293 @@ -+/* -+ * Copyright (c) 2016 Andreas Färber -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This library is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This library is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+#include "imx6sx.dtsi" -+ -+/ { -+ compatible = "fsl,imx6sx"; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ red { -+ label = "udoo-neo:red:mmc"; -+ gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; -+ default-state = "off"; -+ linux,default-trigger = "mmc0"; -+ }; -+ -+ orange { -+ label = "udoo-neo:orange:user"; -+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; -+ default-state = "keep"; -+ }; -+ }; -+ -+ reg_sdio_pwr: regulator-sdio-pwr { -+ compatible = "regulator-fixed"; -+ gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ regulator-name = "SDIO_PWR"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-boot-on; -+ }; -+}; -+ -+&cpu0 { -+ arm-supply = <&sw1a_reg>; -+ soc-supply = <&sw1c_reg>; -+}; -+ -+&fec1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_enet1>; -+ phy-mode = "rmii"; -+ phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_i2c1>; -+ clock-frequency = <100000>; -+ status = "okay"; -+ -+ pmic: pmic@08 { -+ compatible = "fsl,pfuze3000"; -+ reg = <0x08>; -+ -+ regulators { -+ sw1a_reg: sw1a { -+ regulator-min-microvolt = <700000>; -+ regulator-max-microvolt = <1475000>; -+ regulator-boot-on; -+ regulator-always-on; -+ regulator-ramp-delay = <6250>; -+ }; -+ -+ sw1c_reg: sw1b { -+ regulator-min-microvolt = <700000>; -+ regulator-max-microvolt = <1475000>; -+ regulator-boot-on; -+ regulator-always-on; -+ regulator-ramp-delay = <6250>; -+ }; -+ -+ sw2_reg: sw2 { -+ regulator-min-microvolt = <1500000>; -+ regulator-max-microvolt = <1850000>; -+ regulator-boot-on; -+ regulator-always-on; -+ }; -+ -+ sw3a_reg: sw3 { -+ regulator-min-microvolt = <900000>; -+ regulator-max-microvolt = <1650000>; -+ regulator-boot-on; -+ regulator-always-on; -+ }; -+ -+ swbst_reg: swbst { -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5150000>; -+ }; -+ -+ snvs_reg: vsnvs { -+ regulator-min-microvolt = <1000000>; -+ regulator-max-microvolt = <3000000>; -+ regulator-boot-on; -+ regulator-always-on; -+ }; -+ -+ vref_reg: vrefddr { -+ regulator-boot-on; -+ regulator-always-on; -+ }; -+ -+ vgen1_reg: vldo1 { -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ vgen2_reg: vldo2 { -+ regulator-min-microvolt = <800000>; -+ regulator-max-microvolt = <1550000>; -+ }; -+ -+ vgen3_reg: vccsd { -+ regulator-min-microvolt = <2850000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ vgen4_reg: v33 { -+ regulator-min-microvolt = <2850000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ vgen5_reg: vldo3 { -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ -+ vgen6_reg: vldo4 { -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-always-on; -+ }; -+ }; -+ }; -+}; -+ -+&iomuxc { -+ pinctrl_enet1: enet1grp { -+ fsl,pins = -+ , -+ , -+ , -+ , -+ , -+ , -+ -+ , -+ , -+ , -+ , -+ , -+ , -+ -+ ; -+ }; -+ -+ pinctrl_i2c1: i2c1grp { -+ fsl,pins = -+ , -+ ; -+ }; -+ -+ pinctrl_uart1: uart1grp { -+ fsl,pins = -+ , -+ ; -+ }; -+ -+ pinctrl_uart2: uart2grp { -+ fsl,pins = -+ , -+ ; -+ }; -+ -+ pinctrl_uart5: uart5grp { -+ fsl,pins = -+ , -+ ; -+ }; -+ -+ pinctrl_uart6: uart6grp { -+ fsl,pins = -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ ; -+ }; -+ -+ pinctrl_usdhc2: usdhc2grp { -+ fsl,pins = -+ , -+ , -+ , -+ , -+ , -+ , -+ ; /* CD */ -+ }; -+}; -+ -+&uart1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart1>; -+ status = "okay"; -+}; -+ -+/* Cortex-M4 serial */ -+&uart2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart2>; -+ status = "disabled"; -+}; -+ -+/* Arduino serial */ -+&uart5 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart5>; -+ status = "disabled"; -+}; -+ -+&uart6 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_uart6>; -+ uart-has-rtscts; -+ status = "disabled"; -+}; -+ -+&usdhc2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&pinctrl_usdhc2>; -+ vmmc-supply = <®_sdio_pwr>; -+ bus-width = <4>; -+ cd-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; -+ no-1-8-v; -+ keep-power-in-suspend; -+ wakeup-source; -+ status = "okay"; -+}; --- -cgit v0.12 diff --git a/configs/mx6sx_udoo_neo_defconfig b/configs/mx6sx_udoo_neo_defconfig index a465eb974c..b7475d7c70 100644 --- a/configs/mx6sx_udoo_neo_defconfig +++ b/configs/mx6sx_udoo_neo_defconfig @@ -3,11 +3,10 @@ BR2_cortex_a9=y BR2_ARM_ENABLE_NEON=y BR2_ARM_ENABLE_VFP=y BR2_ARM_FPU_VFPV3=y -# Linux headers same as kernel, a 4.9 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9=y +# Linux headers same as kernel, a 4.10 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_10=y BR2_ROOTFS_POST_BUILD_SCRIPT="board/udoo/neo/post-build.sh" BR2_ROOTFS_POST_IMAGE_SCRIPT="board/udoo/neo/post-image.sh" -BR2_GLOBAL_PATCH_DIR="board/udoo/neo/patches" BR2_TARGET_ROOTFS_EXT2=y BR2_TARGET_ROOTFS_EXT2_4=y BR2_TARGET_UBOOT=y @@ -19,7 +18,7 @@ BR2_TARGET_UBOOT_SPL=y BR2_TARGET_UBOOT_SPL_NAME="SPL" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.10" BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" BR2_LINUX_KERNEL_DTS_SUPPORT=y BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6sx-udoo-neo-basic imx6sx-udoo-neo-full imx6sx-udoo-neo-extended"