From: Guo Ren Date: Mon, 6 Mar 2017 11:52:32 +0000 (+0800) Subject: configs: add defconfig for Nationalchip gx6605s dev board X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=6a4131d101cf0d8bc35ce15672524f144c925fc3;p=buildroot.git configs: add defconfig for Nationalchip gx6605s dev board gx6605s is a nice SOC for dvbs2 DVB product, and C-SKY inside. Signed-off-by: Guo Ren [Thomas: drop post-image script copying the gdbinit file, and suggest to use gdb -x option instead to point to the gdbinit file in board/.] Signed-off-by: Thomas Petazzoni --- diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index cb9e6fc17c..678cb697d3 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -86,6 +86,7 @@ beaglebone_defconfig: *defconfig beaglebone_qt5_defconfig: *defconfig chromebook_snow_defconfig: *defconfig ci20_defconfig: *defconfig +csky_gx6605s_defconfig: *defconfig cubieboard2_defconfig: *defconfig firefly_rk3288_defconfig: *defconfig firefly_rk3288_demo_defconfig: *defconfig diff --git a/DEVELOPERS b/DEVELOPERS index ad30895399..ddd9b6a242 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -612,6 +612,8 @@ F: package/liquid-dsp/ N: Guo Ren F: arch/Config.in.csky +F: board/csky/ +F: configs/csky_* N: Gustavo Zacarias F: arch/Config.in.powerpc diff --git a/board/csky/gx6605s/gdbinit b/board/csky/gx6605s/gdbinit new file mode 100644 index 0000000000..d602aad46d --- /dev/null +++ b/board/csky/gx6605s/gdbinit @@ -0,0 +1,25 @@ +tar jtag jtag://127.0.0.1:1025 +reset + +# setup CCR (Cache Config Reg) +# 0-1:MP,2:IE,3:DE,4:WB,5:RS,6:Z,7:BE +set $cr18 = 0x7d + +# vendor custom setup, double cache line & preload +set $cr30 = 0xc + +# pin mux for serial8250 +set *(unsigned int *) 0xa030a14c |= (1 << 22) | (1 << 23) + +# pass devicetree blob +# r2 is magic +# r3 is address +set $r2 = 0x20150401 +set $r3 = 0x92000000 +restore gx6605s.dtb binary 0x92000000 + +# flush cache +set $cr17 = 0x33 + +load + diff --git a/board/csky/readme.txt b/board/csky/readme.txt new file mode 100644 index 0000000000..a820e3b79a --- /dev/null +++ b/board/csky/readme.txt @@ -0,0 +1,87 @@ +C-SKY Development Kit + +Intro +===== + +C-SKY is a CPU Architecture from www.c-sky.com and has it own instruction set. +Just like arm and mips in linux/arch, it named as 'csky'. + +gx6605s develop board is made by Hangzhou Nationalchip and C-SKY. + +Hardware Spec: + * CPU: ck610 up to 594Mhz + * Integrate with 64MB ddr2 in SOC. + * Integrate with hardware Jtag. + * Integrate with usb-to-serial chip. + * USB ehci controller in SOC. + * Power Supply: DC 5V from two micro-usb. + +How to build it +=============== + +Configure Buildroot +------------------- + +The csky_gx6605s_defconfig configuration is a sample configuration with +all that is required to bring the gx6605s Development Board: + + $ make csky_gx6605s_defconfig + +Build everything +---------------- + +Note: you will need to have access to the network, since Buildroot will +download the packages' sources. + + $ make + +Result of the build +------------------- + +After building, you should obtain this tree: + + output/images/ + ├── vmlinux + ├── rootfs.ext2 + └── .dtb + +How to run it +============= + +Prepare Jtag-Server +------------------- + + Download the Jtag-Server here: + + https://github.com/c-sky/tools/raw/master/DebugServerConsole-linux-x86_64-V4.2.00-20161213.tar.gz + + Go to the unpacked directory: + + $./DebugServerConsole -ddc -rstwait 1000 -prereset -port 1025 + + Perhaps you need to use "sudo", which need libusb to detect c510:b210 + + $ sudo ./DebugServerConsole -ddc -rstwait 1000 -prereset -port 1025 + +Prepare USB drive +----------------- + + You sould determine which device associated to the usb drive + carefully. eg: + + $ cat /proc/partitions + 8 48 1971712 sdd + 8 49 976720 sdd1 + + $ sudo dd if=rootfs.ext2 of=/dev/sdd1 + $ sudo sync + +Run +--- + + Plug the usb drive on gx6605s dev board. + + Setup the Console with the rate 115200/8-N-1. + + $ ./output/host/usr/bin/csky-linux-gdb -x board/csky/gx6605s/gdbinit output/images/vmlinux + diff --git a/configs/csky_gx6605s_defconfig b/configs/csky_gx6605s_defconfig new file mode 100644 index 0000000000..5f39c536ac --- /dev/null +++ b/configs/csky_gx6605s_defconfig @@ -0,0 +1,17 @@ +BR2_csky=y +BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y +BR2_TOOLCHAIN_EXTERNAL_URL="https://github.com/c-sky/tools/raw/master/csky-linux-tools-x86_64-glibc-linux-4.9.2-20170227.tar.gz" +BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="csky-linux" +BR2_TOOLCHAIN_EXTERNAL_GCC_4_5=y +BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_9=y +BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y +BR2_TOOLCHAIN_EXTERNAL_CXX=y +BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY=y +BR2_TARGET_GENERIC_GETTY_PORT="ttyS0" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/c-sky/linux-4.9.y/archive/314c498ddc8c43a66ca96ff3af7da98e10fa1cc6.tar.gz" +BR2_LINUX_KERNEL_DEFCONFIG="gx66xx" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="gx6605s" +BR2_TARGET_ROOTFS_EXT2=y