From: Nick Clifton Date: Tue, 10 Feb 1998 03:55:57 +0000 (+0000) Subject: (PR14907) Fix HI16S/LO16 relocations when buf[-1] is evaluated. X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=6aa32b907b5e810ecae3363947bc787c80be34ab;p=binutils-gdb.git (PR14907) Fix HI16S/LO16 relocations when buf[-1] is evaluated. --- diff --git a/bfd/ChangeLog b/bfd/ChangeLog index 2c9ce08e261..aca18fbe96a 100644 --- a/bfd/ChangeLog +++ b/bfd/ChangeLog @@ -1,3 +1,8 @@ +Mon Feb 9 19:40:59 1998 Nick Clifton + + * elf32-v850.c (v850_elf_store_addend_in_insn): Fix another + LO16/HI16S bug and improve comments about what is going on. + Sat Feb 7 15:27:03 1998 Ian Lance Taylor * configure, aclocal.m4: Rebuild with new libtool. diff --git a/bfd/elf32-v850.c b/bfd/elf32-v850.c index 7e446218595..fcc350f00f2 100644 --- a/bfd/elf32-v850.c +++ b/bfd/elf32-v850.c @@ -713,107 +713,158 @@ v850_elf_store_addend_in_insn (abfd, r_type, addend, address, replace) case R_V850_LO16: /* Calculate the sum of the value stored in the instruction and the addend and check for overflow from the low 16 bits into the high - 16 bits. This can occur if the computation sets the 16th bit when - before it was clear, since the 16th bit will be sign extended into - the high part, thus reducing its value by one, but since the 16th bit - was originally clear, the previous R_V850_HI16_S relocation will not - have added in an additional 1 to the high part to compensate for this - effect. Overflow can also occur if the compuation carries into the - 17th bit and it also results in the 16th bit having the same value as - the 16th bit of the original value. What happens is that the - R_V850_HI16_S relocation will have already examined the 16th bit of - the original value and added 1 to the high part if the bit is set. - This compensates for the sign extension of 16th bit of the result of - the computation. But now there is a carry into the 17th bit, and this - has not been allowed for. Note - there is no need to change anything - if a carry occurs, and the 16th bit changes its value, (this can only - happen if the bit was set in the original value, but is clear in the - result of the computation), as the R_V850_HI16_S relocation will have - already added in 1 to the high part for us. Here are some examples: - - original value = 0x12345 - addend = 0x01234 - ------- - 0x13579 => R_V850_HI16_S stores 0x0001 - R_V850_LO16 stores 0x3579 - - This is OK. - - original value = 0x12345 - addend = 0x07000 - ------- - 0x19345 => R_V850_HI16_S stores 0x0001 - R_V850_LO16 stores 0x9345 - - but the 0x9345 value gets sign - extended, so the sum becomes: - - 0x00010000 - 0xffff9345 - ---------- - 0x00009345 which is wrong. - - This is the first example of overflow. - - original value = 0x18888 - addend = 0x08888 - ------- - 0x21110 => R_V850_HI16_S stores 0x0002 (because 16th bit of the original value is set) - R_V850_LO16 stores 0x1110 - - and the sum is now: - - 0x00020000 - 0x00001110 - ---------- - 0x00021110 which is OK. - - original value = 0x1ffff - addend = 0x08888 - ------- - 0x28887 => R_V850_HI16_S stores 0x0002 - R_V850_LO16 stores 0x8887 - - and the sum is now: - - 0x00020000 - 0xffff8887 - ---------- - 0x00018887 which is wrong. - - This is the second example of overflow. - (The 16th bit remains set). - - original value = 0x15555 - addend = 0x0ffff - ------- - 0x25554 => R_V850_HI16_S stores 0x0001 - R_V850_LO16 stores 0x5554 - - the sum is now: - - 0x00010000 - 0x00005554 - ---------- - 0x00015554 which is wrong. - - This is the other form of the second - example of overflow. (The 16th bit - remains clear) + 16 bits. The assembler has already done some of this: If the + value stored in the instruction has its 15th bit set, then the + assembler will have added 1 to the value stored in the associated + HI16S reloc. So for example, these relocations: + + movhi hi( fred ), r0, r1 + movea lo( fred ), r1, r1 + + will store 0 in the value fields for the MOVHI and MOVEA instructions + and addend will be the address of fred, but for these instructions: + + movhi hi( fred + 0x123456), r0, r1 + movea lo( fred + 0x123456), r1, r1 + + the value stored in the MOVHI instruction will be 0x12 and the value + stored in the MOVEA instruction will be 0x3456. If however the + instructions were: + + movhi hi( fred + 0x10ffff), r0, r1 + movea lo( fred + 0x10ffff), r1, r1 + + then the value stored in the MOVHI instruction would be 0x11 (not + 0x10) and the value stored in the MOVEA instruction would be 0xffff. + Thus (assuming for the moment that the addend is 0), at run time the + MOVHI instruction loads 0x110000 into r1, then the MOVEA instruction + adds 0xffffffff (sign extension!) producing 0x10ffff. Similarly if + the instructions were: + + movhi hi( fred - 1), r0, r1 + movea lo( fred - 1), r1, r1 + + then 0 is stored in the MOVHI instruction and -1 is stored in the + MOVEA instruction. + + Overflow can occur if the addition of the value stored in the + instruction plus the addend sets the 15th bit (counting from 0) when + before it was clear. This is because the 15th bit will be sign + extended into the high part, thus reducing its value by one, but + since the 15th bit was originally clear, the previous HI16S + relocation will not have added in an additional 1 to the high part + to compensate for this effect. For example: + + movhi hi( fred + 0x123456), r0, r1 + movea lo( fred + 0x123456), r1, r1 + + The value stored in HI16S reloc is 0x12, the value stored in the LO16 + reloc is 0x3456. If we assume that the address of fred is 0x00007000 + then the relocations become: + + HI16S: 0x0012 + (0x00007000 >> 16) = 0x12 + LO16: 0x3456 + (0x00007000 & 0xffff) = 0xa456 + + but when the instructions are executed, the MOVEA instruction's value + is signed extended, so the sum becomes: + + 0x00120000 + + 0xffffa456 + ------------ + 0x0011a456 but 'fred + 0x123456' = 0x0012a456 + + Note that if the 15th bit was set in the value stored in the LO16 + reloc, then we do not have to do anything: + + movhi hi( fred + 0x10ffff), r0, r1 + movea lo( fred + 0x10ffff), r1, r1 + + HI16S: 0x0011 + (0x00007000 >> 16) = 0x11 + LO16: 0xffff + (0x00007000 & 0xffff) = 0x6fff + + 0x00110000 + + 0x00006fff + ------------ + 0x00116fff = fred + 0x10ffff = 0x7000 + 0x10ffff + + + Overflow can also occur if the computation carries into the 16th bit + and it also results in the 15th bit having the same value as the 15th + bit of the original value. What happens is that the HI16S reloc + will have already examined the 15th bit of the original value and + added 1 to the high part if the bit is set. This compensates for the + sign extension of 15th bit of the result of the computation. But now + there is a carry into the 16th bit, and this has not been allowed for. + + So, for example if fred is at address 0xf000: + + movhi hi( fred + 0xffff), r0, r1 [bit 15 of the offset is 1] + movea lo( fred + 0xffff), r1, r1 + + HI16S: 0x0001 + (0x0000f000 >> 16) = 0x0001 + LO16: 0xffff + (0x0000f000 & 0xffff) = 0xefff (carry into bit 16) + + 0x00010000 + + 0xffffefff + ------------ + 0x0000efff but 'fred + 0xffff' = 0x0001efff + + Similarly, if the 15th bit remains clear, but overflow occurs into + the 16th bit then (assuming the address of fred is 0xf000): + + movhi hi( fred + 0x7000), r0, r1 [bit 15 of the offset is 0] + movea lo( fred + 0x7000), r1, r1 + + HI16S: 0x0000 + (0x0000f000 >> 16) = 0x0000 + LO16: 0x7000 + (0x0000f000 & 0xffff) = 0x6fff (carry into bit 16) + + 0x00000000 + + 0x00006fff + ------------ + 0x00006fff but 'fred + 0x7000' = 0x00016fff + + Note - there is no need to change anything if a carry occurs, and the + 15th bit changes its value from being set to being clear, as the HI16S + reloc will have already added in 1 to the high part for us: + + movhi hi( fred + 0xffff), r0, r1 [bit 15 of the offset is 1] + movea lo( fred + 0xffff), r1, r1 + + HI16S: 0x0001 + (0x00007000 >> 16) + LO16: 0xffff + (0x00007000 & 0xffff) = 0x6fff (carry into bit 16) + + 0x00010000 + + 0x00006fff (bit 15 not set, so the top half is zero) + ------------ + 0x00016fff which is right (assuming that fred is at 0x7000) + + but if the 15th bit goes from being clear to being set, then we must + once again handle overflow: + + movhi hi( fred + 0x7000), r0, r1 [bit 15 of the offset is 0] + movea lo( fred + 0x7000), r1, r1 + + HI16S: 0x0000 + (0x0000ffff >> 16) + LO16: 0x7000 + (0x0000ffff & 0xffff) = 0x6fff (carry into bit 16) + + 0x00000000 + + 0x00006fff (bit 15 not set, so the top half is zero) + ------------ + 0x00006fff which is wrong (assuming that fred is at 0xffff) */ { long result; - + insn = bfd_get_16 (abfd, address); result = insn + addend; -#define BIT16_SET(x) ((x) & 0x8000) -#define OVERFLOWS(a,i) (((a) & 0xffff) + (i) > 0xffff) +#define BIT15_SET(x) ((x) & 0x8000) +#define OVERFLOWS(a,i) ((((a) & 0xffff) + (i)) > 0xffff) - if ((BIT16_SET (result) && ! BIT16_SET (addend)) - || (OVERFLOWS (addend, insn) - && (BIT16_SET (result) == BIT16_SET (addend)))) + if ((BIT15_SET (result) && ! BIT15_SET (addend)) + || (OVERFLOWS (addend, insn) + && ((! BIT15_SET (insn)) || (BIT15_SET (addend))))) { /* Amend the preceding HI16_S relocation, allowing for an intervening instruction, which does occasionally happen. */