From: Luke Kenneth Casson Leighton Date: Sun, 26 Dec 2021 00:15:35 +0000 (+0000) Subject: rename addr to raddr in LoadStore1 to avoid conflict with X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=6ac17dbb09cdb4f47ed2b10cabe9b54602a16e7c;p=soc.git rename addr to raddr in LoadStore1 to avoid conflict with PortInterfaceBase --- diff --git a/src/soc/fu/ldst/loadstore.py b/src/soc/fu/ldst/loadstore.py index 3c96c9bc..6d081eec 100644 --- a/src/soc/fu/ldst/loadstore.py +++ b/src/soc/fu/ldst/loadstore.py @@ -50,7 +50,7 @@ class LDSTRequest(RecordObject): self.load = Signal() self.dcbz = Signal() - self.addr = Signal(64) + self.raddr = Signal(64) # self.store_data = Signal(64) # this is already sync (on a delay) self.byte_sel = Signal(8) self.nc = Signal() # non-cacheable access @@ -97,7 +97,7 @@ class LoadStore1(PortInterfaceBase): self.load = Signal() self.tlbie = Signal() self.dcbz = Signal() - self.addr = Signal(64) + self.raddr = Signal(64) self.maddr = Signal(64) self.store_data = Signal(64) self.load_data = Signal(64) @@ -139,7 +139,7 @@ class LoadStore1(PortInterfaceBase): def set_wr_addr(self, m, addr, mask, misalign, msr, is_dcbz): m.d.comb += self.req.load.eq(0) # store operation m.d.comb += self.req.byte_sel.eq(mask) - m.d.comb += self.req.addr.eq(addr) + m.d.comb += self.req.raddr.eq(addr) m.d.comb += self.req.priv_mode.eq(~msr.pr) # not-problem ==> priv m.d.comb += self.req.virt_mode.eq(msr.dr) # DR ==> virt m.d.comb += self.req.mode_32bit.eq(~msr.sf) # not-sixty-four ==> 32bit @@ -158,7 +158,7 @@ class LoadStore1(PortInterfaceBase): m.d.comb += self.req.load.eq(1) # load operation m.d.comb += self.req.byte_sel.eq(mask) m.d.comb += self.req.align_intr.eq(misalign) - m.d.comb += self.req.addr.eq(addr) + m.d.comb += self.req.raddr.eq(addr) m.d.comb += self.req.priv_mode.eq(~msr.pr) # not-problem ==> priv m.d.comb += self.req.virt_mode.eq(msr.dr) # DR ==> virt m.d.comb += self.req.mode_32bit.eq(~msr.sf) # not-sixty-four ==> 32bit @@ -208,7 +208,7 @@ class LoadStore1(PortInterfaceBase): # copy of address, but gets over-ridden for instr_fault maddr = Signal(64) - m.d.comb += maddr.eq(self.addr) + m.d.comb += maddr.eq(self.raddr) # create a blip (single pulse) on valid read/write request # this can be over-ridden in the FSM to get dcache to re-run @@ -265,7 +265,7 @@ class LoadStore1(PortInterfaceBase): with m.If(d_in.valid): m.d.comb += self.done.eq(~mmureq) # done if not doing MMU with m.If(self.done): - sync += Display("ACK_WAIT, done %x", self.addr) + sync += Display("ACK_WAIT, done %x", self.raddr) sync += self.state.eq(State.IDLE) sync += ldst_r.eq(0) with m.If(self.load): @@ -278,7 +278,7 @@ class LoadStore1(PortInterfaceBase): with m.If(m_in.done): with m.If(~self.r_instr_fault): sync += Display("MMU_LOOKUP, done %x -> %x", - self.addr, d_out.addr) + self.raddr, d_out.addr) # retry the request now that the MMU has # installed a TLB entry, if not exception raised m.d.comb += self.d_out.valid.eq(~exception) @@ -317,14 +317,14 @@ class LoadStore1(PortInterfaceBase): comb += exc.happened.eq(1) # check for updating DAR with m.If(exception): - sync += Display("exception %x", self.addr) + sync += Display("exception %x", self.raddr) # alignment error: store address in DAR with m.If(self.align_intr): - sync += Display("alignment error: addr in DAR %x", self.addr) - sync += self.dar.eq(self.addr) + sync += Display("alignment error: addr in DAR %x", self.raddr) + sync += self.dar.eq(self.raddr) with m.Elif(~self.r_instr_fault): - sync += Display("not instr fault, addr in DAR %x", self.addr) - sync += self.dar.eq(self.addr) + sync += Display("not instr fault, addr in DAR %x", self.raddr) + sync += self.dar.eq(self.raddr) # when done or exception, return to idle state with m.If(self.done | exception): @@ -373,7 +373,7 @@ class LoadStore1(PortInterfaceBase): m.d.comb += self.d_out.valid.eq(~exc.happened) m.d.comb += d_out.load.eq(self.req.load) m.d.comb += d_out.byte_sel.eq(self.req.byte_sel) - m.d.comb += self.addr.eq(self.req.addr) + m.d.comb += self.raddr.eq(self.req.raddr) m.d.comb += d_out.nc.eq(self.req.nc) m.d.comb += d_out.priv_mode.eq(self.req.priv_mode) m.d.comb += d_out.virt_mode.eq(self.req.virt_mode) @@ -383,7 +383,7 @@ class LoadStore1(PortInterfaceBase): with m.Else(): m.d.comb += d_out.load.eq(ldst_r.load) m.d.comb += d_out.byte_sel.eq(ldst_r.byte_sel) - m.d.comb += self.addr.eq(ldst_r.addr) + m.d.comb += self.raddr.eq(ldst_r.raddr) m.d.comb += d_out.nc.eq(ldst_r.nc) m.d.comb += d_out.priv_mode.eq(ldst_r.priv_mode) m.d.comb += d_out.virt_mode.eq(ldst_r.virt_mode) @@ -394,7 +394,7 @@ class LoadStore1(PortInterfaceBase): # XXX these should be possible to remove but for some reason # cannot be... yet. TODO, investigate m.d.comb += self.load_data.eq(d_in.data) - m.d.comb += d_out.addr.eq(self.addr) + m.d.comb += d_out.addr.eq(self.raddr) # Update outputs to MMU m.d.comb += m_out.valid.eq(mmureq)