From: Michael Snyder Date: Wed, 7 Aug 2002 00:28:31 +0000 (+0000) Subject: 2002-08-05 Michael Snyder X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=6acdf5c773d10e7fef7698966f19cc236dfbd388;p=binutils-gdb.git 2002-08-05 Michael Snyder * mips-tdep.c (mips_find_saved_regs): Adjust stack according to MIPS_SAVED_REGSIZE, not GDB_TARGET_IS_MIPS64. Enhance comment. (mips_gdbarch_init): Set N32 target to be mips64. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index e28a8046bfb..63873a08128 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,9 @@ +2002-08-05 Michael Snyder + + * mips-tdep.c (mips_find_saved_regs): Adjust stack according + to MIPS_SAVED_REGSIZE, not GDB_TARGET_IS_MIPS64. Enhance comment. + (mips_gdbarch_init): Set N32 target to be mips64. + 2002-08-06 Kevin Buettner * frame.c (find_saved_register): Break out of loop once saved diff --git a/gdb/mips-tdep.c b/gdb/mips-tdep.c index 58d926c1b50..ffe327d3376 100644 --- a/gdb/mips-tdep.c +++ b/gdb/mips-tdep.c @@ -1371,9 +1371,20 @@ mips_find_saved_regs (struct frame_info *fci) were saved. */ reg_position = fci->frame + PROC_FREG_OFFSET (proc_desc); - /* The freg_offset points to where the first *double* register - is saved. So skip to the high-order word. */ - if (!GDB_TARGET_IS_MIPS64) + /* Apparently, the freg_offset gives the offset to the first 64 bit + saved. + + When the ABI specifies 64 bit saved registers, the FREG_OFFSET + designates the first saved 64 bit register. + + When the ABI specifies 32 bit saved registers, the ``64 bit saved + DOUBLE'' consists of two adjacent 32 bit registers, Hence + FREG_OFFSET, designates the address of the lower register of the + register pair. Adjust the offset so that it designates the upper + register of the pair -- i.e., the address of the first saved 32 + bit register. */ + + if (MIPS_SAVED_REGSIZE == 4) reg_position += MIPS_SAVED_REGSIZE; /* Fill in the offsets for the float registers which float_mask says @@ -4525,7 +4536,7 @@ mips_gdbarch_init (struct gdbarch_info info, tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1; tdep->mips_last_fp_arg_regnum = FPA0_REGNUM + 8 - 1; tdep->mips_regs_have_home_p = 0; - tdep->gdb_target_is_mips64 = 0; + tdep->gdb_target_is_mips64 = 1; tdep->default_mask_address_p = 0; set_gdbarch_long_bit (gdbarch, 32); set_gdbarch_ptr_bit (gdbarch, 32);