From: Tom Tromey Date: Mon, 29 Jun 2009 16:41:45 +0000 (+0000) Subject: gdb X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=6bc80edc986a7afe2389deac4f18e8c1b976b66c;p=binutils-gdb.git gdb * README: Mention parallel check. gdb/testsuite * dg-extract-results.sh: New file. * Makefile.in (FORCE_PARALLEL): New variable. (CHECK_TARGET): New conditional variable. (check): Use CHECK_TARGET. (DO_RUNTEST): New variable. (check-single): New target. (TEST_DIRS): New variable. (TEST_TARGETS): Likewise. (check-parallel): New target. (check-gdb.%): New pattern. (BASE1_FILES): New variable. (BASE2_FILES): Likewise. (check-gdb.base%): New pattern. (%/.dir): New pattern. * configure: Rebuild. * aclocal.m4 (AM_CONDITIONAL): New defun. * configure.ac: Check whether user is using GNU make. (GMAKE): New conditional. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 96c9a95a56d..a9b48741c2f 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,7 @@ +2009-06-29 Tom Tromey + + * README: Mention parallel check. + 2009-06-29 Sami Wagiaalla * dwarf2read.c (read_import_statement): Properly set import location diff --git a/gdb/README b/gdb/README index 71162273bc3..57f600a731a 100644 --- a/gdb/README +++ b/gdb/README @@ -642,6 +642,20 @@ or make site.exp (builds the site specific file) runtest -tool gdb GDB=../gdb (or GDB= as appropriate) +When using a `make'-based method, you can use the Makefile variable +`RUNTESTFLAGS' to pass flags to `runtest', e.g.: + + make RUNTESTFLAGS=--directory=gdb.cp check + +If you use GNU make, you can use its `-j' option to run the testsuite +in parallel. This can greatly reduce the amount of time it takes for +the testsuite to run. In this case, if you set `RUNTESTFLAGS' then, +by default, the tests will be run serially even under `-j'. You can +override this and force a parallel run by setting the `make' variable +`FORCE_PARALLEL' to any non-empty value. Note that the parallel `make +check' assumes that you want to run the entire testsuite, so it is not +compatible with some dejagnu options, like `--directory'. + The last method gives you slightly more control in case of problems with building one or more test executables or if you are using the testsuite `standalone', without it being part of the GDB source tree. diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index 12b5b44f388..cbbce9fe3b8 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,24 @@ +2009-06-29 Tom Tromey + + * dg-extract-results.sh: New file. + * Makefile.in (FORCE_PARALLEL): New variable. + (CHECK_TARGET): New conditional variable. + (check): Use CHECK_TARGET. + (DO_RUNTEST): New variable. + (check-single): New target. + (TEST_DIRS): New variable. + (TEST_TARGETS): Likewise. + (check-parallel): New target. + (check-gdb.%): New pattern. + (BASE1_FILES): New variable. + (BASE2_FILES): Likewise. + (check-gdb.base%): New pattern. + (%/.dir): New pattern. + * configure: Rebuild. + * aclocal.m4 (AM_CONDITIONAL): New defun. + * configure.ac: Check whether user is using GNU make. + (GMAKE): New conditional. + 2009-06-29 Sami Wagiaalla * gdb.cp/namespace-nested-import.cc: New test. diff --git a/gdb/testsuite/Makefile.in b/gdb/testsuite/Makefile.in index 92f1a67191a..5344418664c 100644 --- a/gdb/testsuite/Makefile.in +++ b/gdb/testsuite/Makefile.in @@ -48,6 +48,8 @@ RUNTEST = $(RUNTEST_FOR_TARGET) RUNTESTFLAGS = +FORCE_PARALLEL = + RUNTEST_FOR_TARGET = `\ if [ -f $${srcdir}/../../dejagnu/runtest ]; then \ echo $${srcdir}/../../dejagnu/runtest; \ @@ -122,7 +124,18 @@ site.exp: ./config.status Makefile installcheck: -check: all site.exp +# For GNU make, try to run the tests in parallel. If RUNTESTFLAGS is +# not empty, then by default the tests will be serialized. This can +# be overridden by setting FORCE_PARALLEL to any non-empty value. +# For a non-GNU make, do not parallelize. +@GMAKE_TRUE@CHECK_TARGET = $(if $(FORCE_PARALLEL),check-parallel,$(if $(RUNTESTFLAGS),check-single,check-parallel)) +@GMAKE_FALSE@CHECK_TARGET = check-single + +check: $(CHECK_TARGET) + +# All the hair to invoke dejagnu. A given invocation can just append +# $(RUNTESTFLAGS) +DO_RUNTEST = \ rootme=`pwd`; export rootme; \ srcdir=${srcdir} ; export srcdir ; \ EXPECT=${EXPECT} ; export EXPECT ; \ @@ -132,7 +145,46 @@ check: all site.exp if [ -f $${rootme}/../../expect/expect ] ; then \ TCL_LIBRARY=$${srcdir}/../../tcl/library ; \ export TCL_LIBRARY ; fi ; \ - $(RUNTEST) $(RUNTESTFLAGS) + $(RUNTEST) + +check-single: all site.exp + $(DO_RUNTEST) $(RUNTESTFLAGS) + +# A list of all directories named "gdb.*" which also hold a .exp file. +# We filter out gdb.base and add fake entries, because that directory +# takes the longest to process, and so we split it in half. +TEST_DIRS = gdb.base1 gdb.base2 $(filter-out gdb.base,$(sort $(notdir $(patsubst %/,%,$(dir $(wildcard $(srcdir)/gdb.*/*.exp)))))) + +TEST_TARGETS = $(addprefix check-,$(TEST_DIRS)) + +# We explicitly re-invoke make here for two reasons. First, it lets +# us add a -k option, which makes the parallel check mimic the +# behavior of the serial check; and second, it means that we can still +# regenerate the sum and log files even if a sub-make fails -- which +# it usually does because dejagnu exits with an error if any test +# fails. +check-parallel: + $(MAKE) -k $(TEST_TARGETS); \ + $(SHELL) $(srcdir)/dg-extract-results.sh \ + $(addsuffix /gdb.sum,$(TEST_DIRS)) > gdb.sum; \ + $(SHELL) $(srcdir)/dg-extract-results.sh -L \ + $(addsuffix /gdb.log,$(TEST_DIRS)) > gdb.log + +$(filter-out check-gdb.base%,$(TEST_TARGETS)): check-gdb.%: all site.exp gdb.%/.dir + $(DO_RUNTEST) --directory=gdb.$* --outdir=gdb.$* $(RUNTESTFLAGS) + +# Each half (roughly) of the .exp files from gdb.base. +BASE1_FILES = $(patsubst $(srcdir)/%,%,$(wildcard $(srcdir)/gdb.base/[a-m]*.exp)) +BASE2_FILES = $(patsubst $(srcdir)/%,%,$(wildcard $(srcdir)/gdb.base/[n-z]*.exp)) + +# Handle each half of gdb.base. +check-gdb.base%: all site.exp gdb.base%/.dir + @if test ! -d gdb.base$*; then mkdir gdb.base$*; fi + $(DO_RUNTEST) $(BASE$*_FILES) --outdir gdb.base$* $(RUNTESTFLAGS) + +%/.dir: + @-if test ! -d $*; then mkdir $*; fi + @echo > $@ subdir_do: force @for i in $(DODIRS); do \ diff --git a/gdb/testsuite/aclocal.m4 b/gdb/testsuite/aclocal.m4 index f58abaec3e1..2934db2bd82 100644 --- a/gdb/testsuite/aclocal.m4 +++ b/gdb/testsuite/aclocal.m4 @@ -1,2 +1,35 @@ sinclude(../../config/acx.m4) sinclude(../../config/override.m4) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 7 + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE]) +AC_SUBST([$1_FALSE]) +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) diff --git a/gdb/testsuite/configure b/gdb/testsuite/configure index 3973a2a34b1..5b57101c3ff 100755 --- a/gdb/testsuite/configure +++ b/gdb/testsuite/configure @@ -312,7 +312,7 @@ ac_includes_default="\ # include #endif" -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os target_noncanonical subdirs RPATH_ENVVAR CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT CPP EGREP LIBOBJS LTLIBOBJS' +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os target_noncanonical MAKE GMAKE_TRUE GMAKE_FALSE SET_MAKE subdirs RPATH_ENVVAR CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT CPP EGREP LIBOBJS LTLIBOBJS' ac_subst_files='' ac_pwd=`pwd` @@ -1445,6 +1445,93 @@ esac +# Check for the 'make' the user wants to use. +for ac_prog in make +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_prog_MAKE+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -n "$MAKE"; then + ac_cv_prog_MAKE="$MAKE" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_prog_MAKE="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done + +fi +fi +MAKE=$ac_cv_prog_MAKE +if test -n "$MAKE"; then + echo "$as_me:$LINENO: result: $MAKE" >&5 +echo "${ECHO_T}$MAKE" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + test -n "$MAKE" && break +done + +MAKE_IS_GNU= +case "`$MAKE --version 2>&1 | sed 1q`" in + *GNU*) + MAKE_IS_GNU=yes + ;; +esac + + +if test "$MAKE_IS_GNU" = yes; then + GMAKE_TRUE= + GMAKE_FALSE='#' +else + GMAKE_TRUE='#' + GMAKE_FALSE= +fi + +echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` +if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.make <<\_ACEOF +all: + @echo 'ac_maketemp="$(MAKE)"' +_ACEOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` +if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes +else + eval ac_cv_prog_make_${ac_make}_set=no +fi +rm -f conftest.make +fi +if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then + echo "$as_me:$LINENO: result: yes" >&5 +echo "${ECHO_T}yes" >&6 + SET_MAKE= +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 + SET_MAKE="MAKE=${MAKE-make}" +fi + + # Add HP-specific tests when appropriate. case $target in hppa*-*-hpux*) @@ -3254,6 +3341,13 @@ LIBOBJS=$ac_libobjs LTLIBOBJS=$ac_ltlibobjs +if test -z "${GMAKE_TRUE}" && test -z "${GMAKE_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"GMAKE\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +echo "$as_me: error: conditional \"GMAKE\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi : ${CONFIG_STATUS=./config.status} ac_clean_files_save=$ac_clean_files @@ -3799,6 +3893,10 @@ s,@target_cpu@,$target_cpu,;t t s,@target_vendor@,$target_vendor,;t t s,@target_os@,$target_os,;t t s,@target_noncanonical@,$target_noncanonical,;t t +s,@MAKE@,$MAKE,;t t +s,@GMAKE_TRUE@,$GMAKE_TRUE,;t t +s,@GMAKE_FALSE@,$GMAKE_FALSE,;t t +s,@SET_MAKE@,$SET_MAKE,;t t s,@subdirs@,$subdirs,;t t s,@RPATH_ENVVAR@,$RPATH_ENVVAR,;t t s,@CC@,$CC,;t t diff --git a/gdb/testsuite/configure.ac b/gdb/testsuite/configure.ac index bb98e6f79f6..80d89aa47e3 100644 --- a/gdb/testsuite/configure.ac +++ b/gdb/testsuite/configure.ac @@ -1,7 +1,7 @@ # -*- Autoconf -*- # Process this file with autoconf to produce a configure script. -# Copyright 2002, 2003, 2004, 2005 +# Copyright 2002, 2003, 2004, 2005, 2009 # Free Software Foundation, Inc. # # This program is free software; you can redistribute it and/or modify @@ -26,6 +26,17 @@ AC_CANONICAL_TARGET ACX_NONCANONICAL_TARGET +# Check for the 'make' the user wants to use. +AC_CHECK_PROGS(MAKE, make) +MAKE_IS_GNU= +case "`$MAKE --version 2>&1 | sed 1q`" in + *GNU*) + MAKE_IS_GNU=yes + ;; +esac +AM_CONDITIONAL(GMAKE, test "$MAKE_IS_GNU" = yes) +AC_PROG_MAKE_SET + # Add HP-specific tests when appropriate. case $target in hppa*-*-hpux*) diff --git a/gdb/testsuite/dg-extract-results.sh b/gdb/testsuite/dg-extract-results.sh new file mode 100755 index 00000000000..518c19f6bee --- /dev/null +++ b/gdb/testsuite/dg-extract-results.sh @@ -0,0 +1,423 @@ +#! /bin/sh + +# For a specified tool and optional list of test variants, extract +# test results from one or more test summary (.sum) files and combine +# the results into a new test summary file, sent to the standard output. +# The resulting file can be used with test result comparison scripts for +# results from tests that were run in parallel. See usage() below. + +# Copyright (C) 2008, 2009 Free Software Foundation +# Contributed by Janis Johnson +# +# This file is part of GCC. +# +# GCC is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3, or (at your option) +# any later version. +# +# GCC is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GCC; see the file COPYING. If not, write to +# the Free Software Foundation, 51 Franklin Street, Fifth Floor, +# Boston, MA 02110-1301, USA. + +PROGNAME=dg-extract-results.sh + +usage() { + cat <&2 +Usage: $PROGNAME [-t tool] [-l variant-list] [-L] sum-file ... + + tool The tool (e.g. g++, libffi) for which to create a + new test summary file. If not specified then all + specified sum files must be for the same tool. + variant-list One or more test variant names. If the list is + not specified then one is constructed from all + variants in the files for . + sum-file A test summary file with the format of those + created by runtest from DejaGnu. + If -L is used, merge *.log files instead of *.sum. In this + mode the exact order of lines may not be preserved, just different + Running *.exp chunks should be in correct order. +EOF +} + +# Write a message to the standard error. + +msg() { + echo "$@" >&2 +} + +# Parse the command-line options. + +VARIANTS="" +TOOL="" +MODE="sum" + +while getopts "l:t:L" ARG; do + case $ARG in + l) VARIANTS="${VARIANTS} ${OPTARG}";; + t) test -z "$TOOL" || (msg "${PROGNAME}: only one tool can be specified"; exit 1); + TOOL="${OPTARG}";; + L) MODE="log";; + \?) usage; exit 0;; + esac +done +shift `expr ${OPTIND} - 1` + +if test $# -lt 1 ; then + usage + exit 1 +fi + +TMPDIR=${TMPDIR-/tmp} +SUM_FILES="$@" +FIRST_SUM=$1 +TMP= +trap 'EXIT_STATUS=$?; rm -rf $TMP && exit $EXIT_STATUS' 0 +# Create a (secure) tmp directory for tmp files. +{ + TMP=`(umask 077 && mktemp -d -q "${TMPDIR}/dg-combine-results-$$-XXXXXX") 2>/dev/null` && + test -n "$TMP" && test -d "$TMP" +} || +{ + TMP=${TMPDIR}/dg-combine-results-$$-$RANDOM + (umask 077 && mkdir $TMP) +} || +{ + msg "${PROGNAME}: cannot create a temporary directory" + { (exit 1); exit 1; } +} + +# Find a good awk. + +if test -z "$AWK" ; then + for AWK in gawk nawk awk + do + if type $AWK 2>&1 | grep 'not found' > /dev/null 2>&1 ; then + : + else + break + fi + done +fi + +# Verify that the specified summary files exist. + +ERROR=0 +for FILE in $SUM_FILES +do + if ! test -f $FILE ; then + msg "${PROGNAME}: file $FILE does not exist." + ERROR=1 + fi +done +test $ERROR -eq 0 || exit 1 + +if [ -z "$TOOL" ]; then + # If no tool was specified, all specified summary files must be for + # the same tool. + + CNT=`grep '=== .* tests ===' $SUM_FILES | $AWK '{ print $3 }' | sort -u | wc -l` + if [ $CNT -eq 1 ]; then + TOOL=`grep '=== .* tests ===' $FIRST_SUM | $AWK '{ print $2 }'` + else + msg "${PROGNAME}: sum files are for multiple tools, specify a tool" + msg "" + usage + exit 1 + fi +else + # Ignore the specified summary files that are not for this tool. This + # should keep the relevant files in the same order. + + SUM_FILES=`grep -l "=== $TOOL" $SUM_FILES` + if test -z "$SUM_FILES" ; then + msg "${PROGNAME}: none of the specified files are results for $TOOL" + exit 1 + fi +fi + +if [ "$TOOL" = acats ]; then + # Acats *.sum or *.log files aren't dejagnu generated, and they have + # somewhat different format. + ACATS_AWK=${TMP}/acats.awk + cat < $ACATS_AWK +BEGIN { + print_prologue=1; curfile=""; insummary=0 + passcnt=0; failcnt=0; unsupcnt=0; failures="" +} +/^[ \t]*=== acats configuration ===/ { + insummary=0 + if (print_prologue) print + next +} +/^[ \t]*=== acats tests ===/ { + if (print_prologue) print + print_prologue=0 + next +} +/^Running chapter / { + if (curfile) close (curfile) + curfile="${TMP}/chapter-"\$3 + print >> curfile + next +} +/^[ \t]*=== acats Summary ===/ { + if (curfile) close (curfile) + curfile="" + insummary=1 + next +} +/^# of expected passes/ { if (insummary == 1) passcnt += \$5; next; } +/^# of unexpected failures/ { if (insummary == 1) failcnt += \$5; next; } +/^# of unsupported tests/ { if (insummary == 1) unsupcnt += \$5; next; } +/^\*\*\* FAILURES: / { + if (insummary == 1) { + if (failures) sub(/^\*\*\* FAILURES:/,"") + failures=failures""\$0 + } +} +{ + if (print_prologue) { print; next } + if (curfile) print >> curfile +} +END { + system ("cat ${TMP}/chapter-*") + print " === acats Summary ===" + print "# of expected passes " passcnt + print "# of unexpected failures " failcnt + if (unsupcnt) print "# of unsupported tests " unsupcnt + if (failures) print failures +} +EOF + + rm -f ${TMP}/chapter-* + $AWK -f $ACATS_AWK $SUM_FILES + exit 0 +fi + +# If no variants were specified, find all variants in the remaining +# summary files. Otherwise, ignore specified variants that aren't in +# any of those summary files. + +if test -z "$VARIANTS" ; then + VAR_AWK=${TMP}/variants.awk + cat < $VAR_AWK +/^Schedule of variations:/ { in_vars=1; next } +/^$/ { in_vars=0 } +/^Running target/ { exit } +{ if (in_vars==1) print \$1; else next } +EOF + + touch ${TMP}/varlist + for FILE in $SUM_FILES; do + $AWK -f $VAR_AWK $FILE >> ${TMP}/varlist + done + VARIANTS="`sort -u ${TMP}/varlist`" +else + VARS="$VARIANTS" + VARIANTS="" + for VAR in $VARS + do + grep -q "Running target $VAR" $SUM_FILES && VARIANTS="$VARIANTS $VAR" + done +fi + +# Find out if we have more than one variant, or any at all. + +VARIANT_COUNT=0 +for VAR in $VARIANTS +do + VARIANT_COUNT=`expr $VARIANT_COUNT + 1` +done + +if test $VARIANT_COUNT -eq 0 ; then + msg "${PROGNAME}: no file for $TOOL has results for the specified variants" + exit 1 +fi + +cat $SUM_FILES \ + | $AWK '/^Running/ { if ($2 != "target" && $3 == "...") print "EXPFILE: "$2 } ' \ + | sort -u > ${TMP}/expfiles + +# Write the begining of the combined summary file. + +head -n 2 $FIRST_SUM +echo +echo " === $TOOL tests ===" +echo +echo "Schedule of variations:" +for VAR in $VARIANTS +do + echo " $VAR" +done +echo + +# For each test variant for the tool, copy test reports from each of the +# summary files. Set up two awk scripts from within the loop to +# initialize VAR and TOOL with the script, rather than assuming that the +# available version of awk can pass variables from the command line. + +for VAR in $VARIANTS +do + GUTS_AWK=${TMP}/guts.awk + cat << EOF > $GUTS_AWK +BEGIN { + variant="$VAR" + firstvar=1 + expfileno=1 + cnt=0 + print_using=0 + need_close=0 +} +/^EXPFILE: / { + expfiles[expfileno] = \$2 + expfilesr[\$2] = expfileno + expfileno = expfileno + 1 +} +/^Running target / { + curvar = \$3 + if (variant == curvar && firstvar == 1) { print; print_using=1; firstvar = 0 } + next +} +/^Using / { + if (variant == curvar && print_using) { print; next } +} +/^Running / { + print_using=0 + if (variant == curvar) { + if (need_close) close(curfile) + curfile="${TMP}/list"expfilesr[\$2] + expfileseen[\$2]=expfileseen[\$2] + 1 + need_close=0 + testname="00" + next + } +} +/\===/ { curvar = ""; next } +/^(PASS|XPASS|FAIL|XFAIL|UNRESOLVED|WARNING|ERROR|UNSUPPORTED|UNTESTED|KFAIL):/ { + testname=\$2 + # Ugly hack for gfortran.dg/dg.exp + if ("$TOOL" == "gfortran" && testname ~ /^gfortran.dg\/g77\//) + testname="h"testname +} +/^$/ { if ("$MODE" == "sum") next } +{ if (variant == curvar && curfile) { + if ("$MODE" == "sum") { + printf "%s %08d|", testname, cnt >> curfile + cnt = cnt + 1 + } + filewritten[curfile]=1 + need_close=1 + print >> curfile + } else + next +} +END { + n=1 + while (n < expfileno) { + if (expfileseen[expfiles[n]]) { + print "Running "expfiles[n]" ..." + if (filewritten["${TMP}/list"n]) { + if (expfileseen[expfiles[n]] == 1) + cmd="cat" + else + cmd="LC_ALL=C sort" + if ("$MODE" == "sum") + system (cmd" ${TMP}/list"n" | sed -n 's/^[^ ]* [^ |]*|//p'") + else + system ("cat ${TMP}/list"n) + } + } + n = n + 1 + } +} +EOF + + SUMS_AWK=${TMP}/sums.awk + rm -f $SUMS_AWK + cat << EOF > $SUMS_AWK +BEGIN { + variant="$VAR" + tool="$TOOL" + passcnt=0; failcnt=0; untstcnt=0; xpasscnt=0; xfailcnt=0; unsupcnt=0; unrescnt=0; + curvar=""; insummary=0 +} +/^Running target / { curvar = \$3; next } +/^# of / { if (variant == curvar) insummary = 1 } +/^# of expected passes/ { if (insummary == 1) passcnt += \$5; next; } +/^# of unexpected successes/ { if (insummary == 1) xpasscnt += \$5; next; } +/^# of unexpected failures/ { if (insummary == 1) failcnt += \$5; next; } +/^# of expected failures/ { if (insummary == 1) xfailcnt += \$5; next; } +/^# of untested testcases/ { if (insummary == 1) untstcnt += \$5; next; } +/^# of unresolved testcases/ { if (insummary == 1) unrescnt += \$5; next; } +/^# of unsupported tests/ { if (insummary == 1) unsupcnt += \$5; next; } +/^$/ { if (insummary == 1) + { insummary = 0; curvar = "" } + next + } +{ next } +END { + printf ("\t\t=== %s Summary for %s ===\n\n", tool, variant) + if (passcnt != 0) printf ("# of expected passes\t\t%d\n", passcnt) + if (xpasscnt != 0) printf ("# of unexpected successes\t%d\n", xpasscnt) + if (failcnt != 0) printf ("# of unexpected failures\t%d\n", failcnt) + if (xfailcnt != 0) printf ("# of expected failures\t\t%d\n", xfailcnt) + if (untstcnt != 0) printf ("# of untested testcases\t\t%d\n", untstcnt) + if (unrescnt != 0) printf ("# of unresolved testcases\t%d\n", unrescnt) + if (unsupcnt != 0) printf ("# of unsupported tests\t\t%d\n", unsupcnt) +} +EOF + + PVAR=`echo $VAR | sed 's,/,.,g'` + TMPFILE=${TMP}/var-$PVAR + rm -f $TMPFILE + rm -f ${TMP}/list* + cat ${TMP}/expfiles $SUM_FILES | $AWK -f $GUTS_AWK + cat $SUM_FILES | $AWK -f $SUMS_AWK > $TMPFILE + # If there are multiple variants, output the counts for this one; + # otherwise there will just be the final counts at the end. + test $VARIANT_COUNT -eq 1 || cat $TMPFILE +done + +# Set up an awk script to get the combined summary counts for the tool. + +TOTAL_AWK=${TMP}/total.awk +cat << EOF > $TOTAL_AWK +BEGIN { + tool="$TOOL" + passcnt=0; failcnt=0; untstcnt=0; xpasscnt=0; xfailcnt=0; unsupcnt=0; unrescnt=0 +} +/^# of expected passes/ { passcnt += \$5 } +/^# of unexpected failures/ { failcnt += \$5 } +/^# of unexpected successes/ { xpasscnt += \$5 } +/^# of expected failures/ { xfailcnt += \$5 } +/^# of untested testcases/ { untstcnt += \$5 } +/^# of unresolved testcases/ { unrescnt += \$5 } +/^# of unsupported tests/ { unsupcnt += \$5 } +END { + printf ("\n\t\t=== %s Summary ===\n\n", tool) + if (passcnt != 0) printf ("# of expected passes\t\t%d\n", passcnt) + if (failcnt != 0) printf ("# of unexpected failures\t%d\n", failcnt) + if (xpasscnt != 0) printf ("# of unexpected successes\t%d\n", xpasscnt) + if (xfailcnt != 0) printf ("# of expected failures\t\t%d\n", xfailcnt) + if (untstcnt != 0) printf ("# of untested testcases\t\t%d\n", untstcnt) + if (unrescnt != 0) printf ("# of unresolved testcases\t%d\n", unrescnt) + if (unsupcnt != 0) printf ("# of unsupported tests\t\t%d\n", unsupcnt) +} +EOF + +# Find the total summaries for the tool and add to the end of the output. +cat ${TMP}/var-* | $AWK -f $TOTAL_AWK + +# This is ugly, but if there's version output from the compiler under test +# at the end of the file, we want it. The other thing that might be there +# is the final summary counts. +tail -n 2 $FIRST_SUM | grep -q '^#' || tail -n 2 $FIRST_SUM + +exit 0