From: Pedro Alves Date: Wed, 14 Jan 2015 11:51:06 +0000 (+0000) Subject: PR cli/17828: -batch -ex r breaks terminal X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=6c400b59d574782afdb26eb6c021f28c31bb9f1c;p=binutils-gdb.git PR cli/17828: -batch -ex r breaks terminal Commit d3d4baed (PR python/17372 - Python hangs when displaying help()) had the side effect of causing 'gdb -batch' to leave the terminal in the wrong state if the program was run. E.g,. $ echo 'main(){*(int*)0=0;}' | gcc -x c -; ./gdb/gdb -batch -ex r ./a.out Program received signal SIGSEGV, Segmentation fault. 0x00000000004004ff in main () $ If you start typing the next command, seemingly nothing happens - GDB left the terminal with echo disabled. The issue is that that "r" ends up in fetch_inferior_event, which calls reinstall_readline_callback_handler_cleanup, which causes readline to prep the terminal (raw, echo disabled). But "-batch" causes GDB to exit before the top level event loop is first started, and then nothing de-preps the terminal. The reinstall_readline_callback_handler_cleanup function's intro comment mentions: "Need to do this as we go back to the event loop, ready to process further input." but the implementation forgets the case of when the interpreter is sync, which indicates we won't return to the event loop yet, or as in the case of -batch, we have not started it yet. The fix is to not install the readline callback in that case. For the test, in this case, checking that command echo still works is sufficient. Comparing stty output before/after running GDB is even better. Because stty may not be available, the test tries both ways. In any case, since expect's spawn (what we use to start gdb) creates a new pseudo tty, another expect spawn or tcl exec after GDB exits would not see the wrong terminal settings. So instead, the test spawns a shell and runs stty and GDB in it. Tested on x86_64 Fedora 20. gdb/ 2015-01-14 Pedro Alves PR cli/17828 * infrun.c (reinstall_readline_callback_handler_cleanup): Don't reinstall if the interpreter is sync. gdb/testsuite/ 2015-01-14 Pedro Alves PR cli/17828 * gdb.base/batch-preserve-term-settings.c: New file. * gdb.base/batch-preserve-term-settings.exp: New file. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 3431c2ca0ee..b84ffc88827 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,9 @@ +2015-01-14 Pedro Alves + + PR cli/17828 + * infrun.c (reinstall_readline_callback_handler_cleanup): Don't + reinstall if the interpreter is sync. + 2015-01-13 Doug Evans * objfiles.c (objfile_filename): New function. diff --git a/gdb/infrun.c b/gdb/infrun.c index 105862a2890..11dcc0ef1fb 100644 --- a/gdb/infrun.c +++ b/gdb/infrun.c @@ -3178,6 +3178,16 @@ wait_for_inferior (void) static void reinstall_readline_callback_handler_cleanup (void *arg) { + if (!interpreter_async) + { + /* We're not going back to the top level event loop yet. Don't + install the readline callback, as it'd prep the terminal, + readline-style (raw, noecho) (e.g., --batch). We'll install + it the next time the prompt is displayed, when we're ready + for input. */ + return; + } + if (async_command_editing_p && !sync_execution) gdb_rl_callback_handler_reinstall (); } diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index fa7ffa93439..7e745011adf 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,9 @@ +2015-01-14 Pedro Alves + + PR cli/17828 + * gdb.base/batch-preserve-term-settings.c: New file. + * gdb.base/batch-preserve-term-settings.exp: New file. + 2015-01-13 Doug Evans * gdb.python/py-objfile.exp: Test gdb.lookup_objfile on symlinked diff --git a/gdb/testsuite/gdb.base/batch-preserve-term-settings.c b/gdb/testsuite/gdb.base/batch-preserve-term-settings.c new file mode 100644 index 00000000000..7e362b2940e --- /dev/null +++ b/gdb/testsuite/gdb.base/batch-preserve-term-settings.c @@ -0,0 +1,22 @@ +/* This testcase is part of GDB, the GNU debugger. + + Copyright 2015 Free Software Foundation, Inc. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see . */ + +int +main (void) +{ + return 0; +} diff --git a/gdb/testsuite/gdb.base/batch-preserve-term-settings.exp b/gdb/testsuite/gdb.base/batch-preserve-term-settings.exp new file mode 100644 index 00000000000..834e7a94fe5 --- /dev/null +++ b/gdb/testsuite/gdb.base/batch-preserve-term-settings.exp @@ -0,0 +1,186 @@ +# Copyright (C) 2015 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +# Check that "gdb -batch -ex run" does not leave the terminal in the +# wrong state. + +standard_testfile + +if {[build_executable "failed to prepare" $testfile $srcfile debug] == -1} { + return -1 +} + +set file_arg $binfile +if [is_remote host] { + set file_arg [remote_download host $file_arg] +} + +global GDBFLAGS +set saved_gdbflags $GDBFLAGS + +# The shell's prompt. +set shell_prompt "$ " +set shell_prompt_re [string_to_regexp $shell_prompt] + +# Spawn shell. Returns true on success, false otherwise. + +proc spawn_shell {} { + global shell_prompt_re + + set res [remote_spawn host "/bin/sh"] + if { $res < 0 || $res == "" } { + unsupported "Spawning shell failed." + return 0 + } + + set gotit 0 + set test "spawn shell" + gdb_expect { + -re "$shell_prompt_re$" { + pass $test + set gotit 1 + } + timeout { + fail "$test (timeout)" + } + eof { + fail "$test (eof)" + } + } + + return $gotit +} + +# Exit the shell. + +proc exit_shell {} { + global shell_prompt_re + + set test "exit shell" + send_gdb "exit\n" + gdb_expect { + timeout { + fail "$test (timeout)" + return 0 + } + eof { + pass "$test" + } + } + if ![is_remote host] { + remote_close host + } +} + +# Run "stty" and store the output in $result. Returns true on +# success, false otherwise. + +proc run_stty {message result} { + global shell_prompt_re + + upvar $result output + + send_gdb "stty || echo \"not found\"\n" + set gotit 0 + gdb_expect { + -re "not found.*not found.*$shell_prompt_re$" { + pass "$message (not found)" + } + -re "(.*)$shell_prompt_re$" { + set output $expect_out(1,string) + set gotit 1 + pass $message + } + timeout { + fail "$message (timeout)" + } + eof { + fail "$message (eof)" + } + } + return $gotit +} + +# Check that "gdb -batch -ex run" does not leave the terminal in the +# wrong state. + +proc test_terminal_settings_preserved {} { + global file_arg + global GDB INTERNAL_GDBFLAGS GDBFLAGS + global gdb_prompt pagination_prompt + global saved_gdbflags + global shell_prompt_re + + if ![spawn_shell] { + return + } + + set stty_supported [run_stty "stty before" stty_before] + + set test "gdb -batch -ex run" + set GDBFLAGS $saved_gdbflags + append GDBFLAGS " -batch" + append GDBFLAGS " -ex \"set height unlimited\"" + append GDBFLAGS " -ex \"start\"" + append GDBFLAGS " --args \"$file_arg\"" + send_gdb "$GDB $INTERNAL_GDBFLAGS $GDBFLAGS [host_info gdb_opts]\n" + gdb_expect { + -re "Don't know how to run.*$shell_prompt_re$" { + unsupported $test + } + -re "$gdb_prompt $" { + # -batch implies no GDB prompt. + fail $test + } + -re "Temporary breakpoint .*$shell_prompt_re$" { + pass $test + } + timeout { + fail "$test (timeout)" + } + eof { + fail "$test (eof)" + } + } + + set test "echo test_echo" + send_gdb "echo test_echo\n" + gdb_expect { + -re "^echo test_echo\r\ntest_echo\r\n.*$shell_prompt_re$" { + pass $test + } + timeout { + fail "$test (timeout)" + } + eof { + fail "$test (eof)" + } + } + + set test "terminal settings preserved" + if $stty_supported { + run_stty "stty after" stty_after + + gdb_assert [string equal $stty_before $stty_after] $test + } else { + unsupported "$test (no stty)" + } + + exit_shell +} + +test_terminal_settings_preserved + +set GDBFLAGS $saved_gdbflags