From: Fabio Porcedda <fabio.porcedda@gmail.com>
Date: Fri, 14 Feb 2014 09:55:05 +0000 (+0100)
Subject: package: add support for top-level parallel make
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=6c5c08b854e4490697076ae3c5a9c587d8672c63;p=buildroot.git

package: add support for top-level parallel make

To be able to use top-level parallel make we must not depend in a rule
on the order of evaluation of the prerequisites, so instead of relying
on the left to right ordering of evaluation of the prerequisites add
an explicit rule to describe the dependencies.

We cannot use the pattern rules because they must have the same
dependency for every package, but we need to change the dependencies
depending on $(2)_OVERRIDE_SRCDIR variable value, so we must use a
more flexible way like $(2)_TARGET_% variables.

So add explicit dependencies for the following stamp files:
  $(2)_TARGET_EXTRACT
  $(2)_TARGET_PATCH
  $(2)_TARGET_CONFIGURE
  $(2)_TARGET_BUILD
  $(2)_TARGET_INSTALL_STAGING
  $(2)_TARGET_INSTALL_TARGET
  $(2)_TARGET_INSTALL_IMAGES
  $(2)_TARGET_INSTALL_HOST

Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
---

diff --git a/package/glibc/glibc.mk b/package/glibc/glibc.mk
index f50b4591bc..6579f4616b 100644
--- a/package/glibc/glibc.mk
+++ b/package/glibc/glibc.mk
@@ -38,9 +38,6 @@ GLIBC_ADD_TOOLCHAIN_DEPENDENCY = NO
 # cross-compiler and the kernel headers
 GLIBC_DEPENDENCIES = host-gcc-initial linux-headers host-gawk
 
-# Before (e)glibc is built, we must have the second stage cross-compiler
-glibc-build: host-gcc-intermediate
-
 GLIBC_SUBDIR = build
 
 GLIBC_INSTALL_STAGING = YES
@@ -142,3 +139,6 @@ define GLIBC_INSTALL_TARGET_CMDS
 endef
 
 $(eval $(autotools-package))
+
+# Before (e)glibc is built, we must have the second stage cross-compiler
+$(GLIBC_TARGET_BUILD): | host-gcc-intermediate
diff --git a/package/pkg-generic.mk b/package/pkg-generic.mk
index b135b140ea..fec16b0cb2 100644
--- a/package/pkg-generic.mk
+++ b/package/pkg-generic.mk
@@ -412,30 +412,42 @@ $(1)-install:		$(1)-install-staging $(1)-install-target $(1)-install-images
 endif
 
 ifeq ($$($(2)_INSTALL_TARGET),YES)
-$(1)-install-target:	$(1)-build \
-			$$($(2)_TARGET_INSTALL_TARGET)
+$(1)-install-target:		$$($(2)_TARGET_INSTALL_TARGET)
+$$($(2)_TARGET_INSTALL_TARGET):	$$($(2)_TARGET_BUILD)
 else
 $(1)-install-target:
 endif
 
 ifeq ($$($(2)_INSTALL_STAGING),YES)
-$(1)-install-staging:	$(1)-build \
-			$$($(2)_TARGET_INSTALL_STAGING)
+$(1)-install-staging:			$$($(2)_TARGET_INSTALL_STAGING)
+$$($(2)_TARGET_INSTALL_STAGING):	$$($(2)_TARGET_BUILD)
+# Some packages use install-staging stuff for install-target
+$$($(2)_TARGET_INSTALL_TARGET):		$$($(2)_TARGET_INSTALL_STAGING)
 else
 $(1)-install-staging:
 endif
 
 ifeq ($$($(2)_INSTALL_IMAGES),YES)
-$(1)-install-images:	$(1)-build \
-			$$($(2)_TARGET_INSTALL_IMAGES)
+$(1)-install-images:		$$($(2)_TARGET_INSTALL_IMAGES)
+$$($(2)_TARGET_INSTALL_IMAGES):	$$($(2)_TARGET_BUILD)
 else
 $(1)-install-images:
 endif
 
-$(1)-install-host:      $(1)-build $$($(2)_TARGET_INSTALL_HOST)
+$(1)-install-host:      	$$($(2)_TARGET_INSTALL_HOST)
+$$($(2)_TARGET_INSTALL_HOST):	$$($(2)_TARGET_BUILD)
 
-$(1)-build:		$(1)-configure \
-			$$($(2)_TARGET_BUILD)
+$(1)-build:		$$($(2)_TARGET_BUILD)
+$$($(2)_TARGET_BUILD):	$$($(2)_TARGET_CONFIGURE)
+
+# Since $(2)_DEPENDENCIES are phony targets, they are always "newer"
+# than $(2)_TARGET_CONFIGURE. This would force the configure step (and
+# therefore the other steps as well) to be re-executed with every
+# invocation of make.  Therefore, make $(2)_DEPENDENCIES an order-only
+# dependency by using |.
+
+$(1)-configure:			$$($(2)_TARGET_CONFIGURE)
+$$($(2)_TARGET_CONFIGURE):	| $$($(2)_DEPENDENCIES)
 
 $$($(2)_TARGET_SOURCE) $$($(2)_TARGET_RSYNC): | dirs prepare
 ifeq ($(filter $(1),$(DEPENDENCIES_HOST_PREREQ)),)
@@ -449,13 +461,13 @@ ifeq ($$($(2)_OVERRIDE_SRCDIR),)
 #  extract
 #  patch
 #  configure
-$(1)-configure:		$(1)-patch $(1)-depends \
-			$$($(2)_TARGET_CONFIGURE)
+$$($(2)_TARGET_CONFIGURE):	$$($(2)_TARGET_PATCH)
 
-$(1)-patch:		$(1)-extract $$($(2)_TARGET_PATCH)
+$(1)-patch:		$$($(2)_TARGET_PATCH)
+$$($(2)_TARGET_PATCH):	$$($(2)_TARGET_EXTRACT)
 
-$(1)-extract:		$(1)-source \
-			$$($(2)_TARGET_EXTRACT)
+$(1)-extract:			$$($(2)_TARGET_EXTRACT)
+$$($(2)_TARGET_EXTRACT):	$$($(2)_TARGET_SOURCE)
 
 $(1)-depends:		$$($(2)_DEPENDENCIES)
 
@@ -465,10 +477,9 @@ else
 #  source, by rsyncing
 #  depends
 #  configure
-$(1)-configure:		$(1)-depends \
-			$$($(2)_TARGET_CONFIGURE)
+$$($(2)_TARGET_CONFIGURE):	$$($(2)_TARGET_RSYNC)
 
-$(1)-depends:		$(1)-rsync $$($(2)_DEPENDENCIES)
+$(1)-depends:		$$($(2)_DEPENDENCIES)
 
 $(1)-patch:		$(1)-rsync
 $(1)-extract:		$(1)-rsync
diff --git a/package/uclibc/uclibc.mk b/package/uclibc/uclibc.mk
index ea1c6946a1..4860c580e3 100644
--- a/package/uclibc/uclibc.mk
+++ b/package/uclibc/uclibc.mk
@@ -29,9 +29,6 @@ UCLIBC_ADD_TOOLCHAIN_DEPENDENCY = NO
 # cross-compiler and the kernel headers
 UCLIBC_DEPENDENCIES = host-gcc-initial linux-headers
 
-# Before uClibc is built, we must have the second stage cross-compiler
-uclibc-build: host-gcc-intermediate
-
 # specifying UCLIBC_CONFIG_FILE on the command-line overrides the .config
 # setting.
 ifndef UCLIBC_CONFIG_FILE
@@ -556,3 +553,6 @@ uclibc-menuconfig: dirs uclibc-patch
 	rm -f $(UCLIBC_DIR)/.stamp_{configured,built,target_installed,staging_installed}
 
 $(eval $(generic-package))
+
+# Before uClibc is built, we must have the second stage cross-compiler
+$(UCLIBC_TARGET_BUILD): | host-gcc-intermediate