From: Jim Blandy Date: Wed, 4 Aug 2004 17:17:55 +0000 (+0000) Subject: Change the layout of the PowerPC E500 raw register cache to allow X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=6ced10dd55b922c6e9f2dc6430b106bf1861a5d2;p=binutils-gdb.git Change the layout of the PowerPC E500 raw register cache to allow the lower 32-bit halves of the GPRS to be their own raw registers, not pseudoregisters. * ppc-tdep.h (struct gdbarch_tdep): Remove ppc_gprs_pseudo_p flag; add ppc_ev0_upper_regnum flag. * rs6000-tdep.c: #include "reggroups.h". (spe_register_p): Recognize the ev upper half registers as SPE registers. (init_sim_regno_table): Build gdb->sim mappings for the upper-half registers. (e500_move_ev_register): New function. (e500_pseudo_register_read, e500_pseudo_register_write): The 'ev' vector registers are the pseudo-registers now, formed by splicing together the gprs and the upper-half registers. (e500_register_reggroup_p): New function. (P): Macro deleted. (P8, A4): New macro. (PPC_EV_REGS, PPC_GPRS_PSEUDO_REGS): Macros deleted. (PPC_SPE_GP_REGS, PPC_SPE_UPPER_GP_REGS, PPC_EV_PSEUDO_REGS): New macros. (registers_e500): Rearrange register set so that the raw register set contains 32-bit GPRs and upper-half registers, and the SPE vector registers become pseudo-registers. (rs6000_gdbarch_init): Don't initialize tdep->ppc_gprs_pseudo_p; it has been deleted. Initialize ppc_ev0_upper_regnum. Many other register numbers are now the same for the E500 as they are for other PowerPC variants. Register e500_register_reggroup_p as the register group function for the E500. * Makefile.in (rs6000-tdep.o): Update dependencies. Adapt PPC E500 native support to the new raw regcache layout. * ppc-linux-nat.c (struct gdb_evrregset_t): Doc fixes. (read_spliced_spe_reg, write_spliced_spe_reg): Deleted. (fetch_spe_register, store_spe_register): Handle fetching/storing all the SPE registers at once, if regno == -1. These now take over the job of fetch_spe_registers and store_spe_registers. (fetch_spe_registers, store_spe_registers): Deleted. (fetch_ppc_registers, store_ppc_registers): Fetch/store gprs unconditionally; they're always raw. Fetch/store SPE upper half registers, if present, instead of ev registers. (fetch_register, store_register): Remove sanity checks: gprs are never pseudo-registers now, so we never need to even mention any registers that are ever pseudoregisters. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index 08bd11cde5d..37d97170824 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,5 +1,49 @@ 2004-08-04 Jim Blandy + Change the layout of the PowerPC E500 raw register cache to allow + the lower 32-bit halves of the GPRS to be their own raw registers, + not pseudoregisters. + * ppc-tdep.h (struct gdbarch_tdep): Remove ppc_gprs_pseudo_p flag; + add ppc_ev0_upper_regnum flag. + * rs6000-tdep.c: #include "reggroups.h". + (spe_register_p): Recognize the ev upper half registers as SPE + registers. + (init_sim_regno_table): Build gdb->sim mappings for the upper-half + registers. + (e500_move_ev_register): New function. + (e500_pseudo_register_read, e500_pseudo_register_write): The 'ev' + vector registers are the pseudo-registers now, formed by splicing + together the gprs and the upper-half registers. + (e500_register_reggroup_p): New function. + (P): Macro deleted. + (P8, A4): New macro. + (PPC_EV_REGS, PPC_GPRS_PSEUDO_REGS): Macros deleted. + (PPC_SPE_GP_REGS, PPC_SPE_UPPER_GP_REGS, PPC_EV_PSEUDO_REGS): New + macros. + (registers_e500): Rearrange register set so that the raw register + set contains 32-bit GPRs and upper-half registers, and the SPE + vector registers become pseudo-registers. + (rs6000_gdbarch_init): Don't initialize tdep->ppc_gprs_pseudo_p; + it has been deleted. Initialize ppc_ev0_upper_regnum. Many other + register numbers are now the same for the E500 as they are for + other PowerPC variants. Register e500_register_reggroup_p as the + register group function for the E500. + * Makefile.in (rs6000-tdep.o): Update dependencies. + + Adapt PPC E500 native support to the new raw regcache layout. + * ppc-linux-nat.c (struct gdb_evrregset_t): Doc fixes. + (read_spliced_spe_reg, write_spliced_spe_reg): Deleted. + (fetch_spe_register, store_spe_register): Handle fetching/storing + all the SPE registers at once, if regno == -1. These now take + over the job of fetch_spe_registers and store_spe_registers. + (fetch_spe_registers, store_spe_registers): Deleted. + (fetch_ppc_registers, store_ppc_registers): Fetch/store gprs + unconditionally; they're always raw. Fetch/store SPE upper half + registers, if present, instead of ev registers. + (fetch_register, store_register): Remove sanity checks: gprs are + never pseudo-registers now, so we never need to even mention any + registers that are ever pseudoregisters. + Use a fixed register numbering when communicating with the PowerPC simulator. * ppc-tdep.h (struct gdbarch_tdep): New member: 'sim_regno'. diff --git a/gdb/Makefile.in b/gdb/Makefile.in index 27ca01af5af..32b955ad3a8 100644 --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -2402,7 +2402,7 @@ rs6000-tdep.o: rs6000-tdep.c $(defs_h) $(frame_h) $(inferior_h) $(symtab_h) \ $(coff_xcoff_h) $(libxcoff_h) $(elf_bfd_h) $(solib_svr4_h) \ $(ppc_tdep_h) $(gdb_assert_h) $(dis_asm_h) $(trad_frame_h) \ $(frame_unwind_h) $(frame_base_h) $(infcall_h) $(sim_regno_h) \ - $(gdb_sim_ppc_h) + $(gdb_sim_ppc_h) $(reggroups_h) s390-nat.o: s390-nat.c $(defs_h) $(tm_h) $(regcache_h) $(inferior_h) \ $(s390_tdep_h) s390-tdep.o: s390-tdep.c $(defs_h) $(arch_utils_h) $(frame_h) $(inferior_h) \ diff --git a/gdb/ppc-linux-nat.c b/gdb/ppc-linux-nat.c index c3ea712fdad..02095e992f7 100644 --- a/gdb/ppc-linux-nat.c +++ b/gdb/ppc-linux-nat.c @@ -123,12 +123,10 @@ typedef char gdb_vrregset_t[SIZEOF_VRREGS]; some SPE-specific registers. GDB itself continues to claim the general-purpose registers are 32 - bits long; the full 64-bit registers are called 'ev0' -- 'ev31'. - The ev registers are raw registers, and the GPR's are pseudo- - registers mapped onto their lower halves. This means that reading - and writing ev registers involves a mix of regset-at-once - PTRACE_{GET,SET}EVRREGS calls and register-at-a-time - PTRACE_{PEEK,POKE}USR calls. + bits long. It has unnamed raw registers that hold the upper halves + of the gprs, and the the full 64-bit SIMD views of the registers, + 'ev0' -- 'ev31', are pseudo-registers that splice the top and + bottom halves together. This is the structure filled in by PTRACE_GETEVRREGS and written to the inferior's registers by PTRACE_SETEVRREGS. */ @@ -283,105 +281,46 @@ get_spe_registers (int tid, struct gdb_evrregset_t *evrregset) memset (evrregset, 0, sizeof (*evrregset)); } -/* Assuming TID refers to an SPE process, store the full 64-bit value - of TID's ev register EV_REGNUM in DEST, getting the high bits from - EVRREGS and the low bits from the kernel via ptrace. */ -static void -read_spliced_spe_reg (int tid, int ev_regnum, - struct gdb_evrregset_t *evrregs, - char *dest) -{ - struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); - - /* Make sure we're trying to read an EV register; that's all we - handle. */ - gdb_assert (tdep->ppc_ev0_regnum <= ev_regnum - && ev_regnum <= tdep->ppc_ev31_regnum); - - /* Make sure the sizes for the splicing add up. */ - gdb_assert (sizeof (evrregs->evr[0]) + sizeof (PTRACE_XFER_TYPE) - == register_size (current_gdbarch, ev_regnum)); - - { - /* The index of ev_regnum in evrregs->evr[]. */ - int ev_index = ev_regnum - tdep->ppc_ev0_regnum; - - /* The number of the corresponding general-purpose register, which - holds the lower 32 bits of the EV register. */ - int gpr_regnum = tdep->ppc_gp0_regnum + ev_index; - - /* The offset of gpr_regnum in the process's uarea. */ - CORE_ADDR gpr_uoffset = ppc_register_u_addr (gpr_regnum); - - /* The low word of the EV register's value. */ - PTRACE_XFER_TYPE low_word; - - /* The PTRACE_PEEKUSR / PT_READ_U ptrace requests need to be able - to return arbitrary register values, so they can't return -1 to - indicate an error. So we clear errno, and then check it after - the call. */ - errno = 0; - low_word = ptrace (PT_READ_U, tid, (PTRACE_ARG3_TYPE) gpr_uoffset, 0); - - if (errno != 0) - { - char message[128]; - sprintf (message, "reading register %s (#%d)", - REGISTER_NAME (ev_regnum), ev_regnum); - perror_with_name (message); - } - - if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) - { - memcpy (dest, &evrregs->evr[ev_index], - sizeof (evrregs->evr[ev_index])); - * (PTRACE_XFER_TYPE *) (dest + sizeof (evrregs->evr[ev_index])) - = low_word; - } - else if (TARGET_BYTE_ORDER == BFD_ENDIAN_LITTLE) - { - * (PTRACE_XFER_TYPE *) dest = low_word; - memcpy (dest + sizeof (PTRACE_XFER_TYPE), - &evrregs->evr[ev_index], sizeof (evrregs->evr[ev_index])); - } - else - gdb_assert (0); - } -} - - -/* On SPE machines, supply the full value of the SPE register REGNO - from TID. This handles ev0 -- ev31 and acc, which are 64 bits - long, and spefscr, which is 32 bits long. */ +/* Supply values from TID for SPE-specific raw registers: the upper + halves of the GPRs, the accumulator, and the spefscr. REGNO must + be the number of an upper half register, acc, spefscr, or -1 to + supply the values of all registers. */ static void fetch_spe_register (int tid, int regno) { struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); struct gdb_evrregset_t evrregs; + gdb_assert (sizeof (evrregs.evr[0]) + == register_size (current_gdbarch, tdep->ppc_ev0_upper_regnum)); + gdb_assert (sizeof (evrregs.acc) + == register_size (current_gdbarch, tdep->ppc_acc_regnum)); + gdb_assert (sizeof (evrregs.spefscr) + == register_size (current_gdbarch, tdep->ppc_spefscr_regnum)); + get_spe_registers (tid, &evrregs); - if (tdep->ppc_ev0_regnum <= regno - && regno <= tdep->ppc_ev31_regnum) - { - char buf[MAX_REGISTER_SIZE]; - read_spliced_spe_reg (tid, regno, &evrregs, buf); - regcache_raw_supply (current_regcache, regno, buf); - } - else if (regno == tdep->ppc_acc_regnum) - { - gdb_assert (sizeof (evrregs.acc) - == register_size (current_gdbarch, regno)); - regcache_raw_supply (current_regcache, regno, &evrregs.acc); - } - else if (regno == tdep->ppc_spefscr_regnum) + if (regno == -1) { - gdb_assert (sizeof (evrregs.spefscr) - == register_size (current_gdbarch, regno)); - regcache_raw_supply (current_regcache, regno, &evrregs.spefscr); + int i; + + for (i = 0; i < ppc_num_gprs; i++) + regcache_raw_supply (current_regcache, tdep->ppc_ev0_upper_regnum + i, + &evrregs.evr[i]); } - else - gdb_assert (0); + else if (tdep->ppc_ev0_upper_regnum <= regno + && regno < tdep->ppc_ev0_upper_regnum + ppc_num_gprs) + regcache_raw_supply (current_regcache, regno, + &evrregs.evr[regno - tdep->ppc_ev0_upper_regnum]); + + if (regno == -1 + || regno == tdep->ppc_acc_regnum) + regcache_raw_supply (current_regcache, tdep->ppc_acc_regnum, &evrregs.acc); + + if (regno == -1 + || regno == tdep->ppc_spefscr_regnum) + regcache_raw_supply (current_regcache, tdep->ppc_spefscr_regnum, + &evrregs.spefscr); } static void @@ -394,12 +333,6 @@ fetch_register (int tid, int regno) unsigned int offset; /* Offset of registers within the u area. */ char buf[MAX_REGISTER_SIZE]; - /* Sanity check: this function should only be called to fetch raw - registers' values, never pseudoregisters' values. */ - if (tdep->ppc_gp0_regnum <= regno - && regno < tdep->ppc_gp0_regnum + ppc_num_gprs) - gdb_assert (! tdep->ppc_gprs_pseudo_p); - if (altivec_register_p (regno)) { /* If this is the first time through, or if it is not the first @@ -512,42 +445,14 @@ fetch_altivec_registers (int tid) supply_vrregset (®s); } -/* On SPE machines, fetch the full 64 bits of all the general-purpose - registers, as well as the SPE-specific registers 'acc' and - 'spefscr'. */ -static void -fetch_spe_registers (int tid) -{ - struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); - struct gdb_evrregset_t evrregs; - int i; - - get_spe_registers (tid, &evrregs); - - /* Splice and supply each of the EV registers. */ - for (i = 0; i < ppc_num_gprs; i++) - { - char buf[MAX_REGISTER_SIZE]; - - read_spliced_spe_reg (tid, tdep->ppc_ev0_regnum + i, &evrregs, buf); - regcache_raw_supply (current_regcache, tdep->ppc_ev0_regnum + i, buf); - } - - /* Supply the SPE-specific registers. */ - regcache_raw_supply (current_regcache, tdep->ppc_acc_regnum, &evrregs.acc); - regcache_raw_supply (current_regcache, tdep->ppc_spefscr_regnum, - &evrregs.spefscr); -} - static void fetch_ppc_registers (int tid) { int i; struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); - if (! tdep->ppc_gprs_pseudo_p) - for (i = 0; i < ppc_num_gprs; i++) - fetch_register (tid, tdep->ppc_gp0_regnum + i); + for (i = 0; i < ppc_num_gprs; i++) + fetch_register (tid, tdep->ppc_gp0_regnum + i); if (tdep->ppc_fp0_regnum >= 0) for (i = 0; i < ppc_num_fprs; i++) fetch_register (tid, tdep->ppc_fp0_regnum + i); @@ -569,8 +474,8 @@ fetch_ppc_registers (int tid) if (have_ptrace_getvrregs) if (tdep->ppc_vr0_regnum != -1 && tdep->ppc_vrsave_regnum != -1) fetch_altivec_registers (tid); - if (tdep->ppc_ev0_regnum >= 0) - fetch_spe_registers (tid); + if (tdep->ppc_ev0_upper_regnum >= 0) + fetch_spe_register (tid, -1); } /* Fetch registers from the child process. Fetch all registers if @@ -655,102 +560,58 @@ set_spe_registers (int tid, struct gdb_evrregset_t *evrregset) } } -/* Store the bytes at SRC as the contents of TID's EV register EV_REGNUM. - Write the less significant word to TID using ptrace, and copy the - more significant word to the appropriate slot in EVRREGS. */ -static void -write_spliced_spe_reg (int tid, int ev_regnum, - struct gdb_evrregset_t *evrregs, - char *src) -{ - struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); - - /* Make sure we're trying to write an EV register; that's all we - handle. */ - gdb_assert (tdep->ppc_ev0_regnum <= ev_regnum - && ev_regnum <= tdep->ppc_ev31_regnum); - - /* Make sure the sizes for the splicing add up. */ - gdb_assert (sizeof (evrregs->evr[0]) + sizeof (PTRACE_XFER_TYPE) - == register_size (current_gdbarch, ev_regnum)); - - { - int ev_index = ev_regnum - tdep->ppc_ev0_regnum; - - /* The number of the corresponding general-purpose register, which - holds the lower 32 bits of the EV register. */ - int gpr_regnum = tdep->ppc_gp0_regnum + ev_index; - - /* The offset of gpr_regnum in the process's uarea. */ - CORE_ADDR gpr_uoffset = ppc_register_u_addr (gpr_regnum); - - /* The PTRACE_POKEUSR / PT_WRITE_U ptrace requests need to be able - to return arbitrary register values, so they can't return -1 to - indicate an error. So we clear errno, and check it again - afterwards. */ - errno = 0; - - if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) - { - memcpy (&evrregs->evr[ev_index], src, sizeof (evrregs->evr[ev_index])); - ptrace (PT_WRITE_U, tid, (PTRACE_ARG3_TYPE) gpr_uoffset, - * (PTRACE_XFER_TYPE *) (src + sizeof (evrregs->evr[0]))); - } - else if (TARGET_BYTE_ORDER == BFD_ENDIAN_LITTLE) - { - ptrace (PT_WRITE_U, tid, (PTRACE_ARG3_TYPE) gpr_uoffset, - * (PTRACE_XFER_TYPE *) src); - memcpy (&evrregs->evr[ev_index], src + sizeof (PTRACE_XFER_TYPE), - sizeof (evrregs->evr[ev_index])); - } - else - gdb_assert (0); - - if (errno != 0) - { - char message[128]; - sprintf (message, "writing register %s (#%d)", - REGISTER_NAME (ev_regnum), ev_regnum); - perror_with_name (message); - } - } -} - -/* Write GDB's value for the SPE register REGNO to TID. */ +/* Write GDB's value for the SPE-specific raw register REGNO to TID. + If REGNO is -1, write the values of all the SPE-specific + registers. */ static void store_spe_register (int tid, int regno) { struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); struct gdb_evrregset_t evrregs; - /* We can only read and write the entire EVR register set at a time, - so to write just a single register, we do a read-modify-write - maneuver. */ - get_spe_registers (tid, &evrregs); + gdb_assert (sizeof (evrregs.evr[0]) + == register_size (current_gdbarch, tdep->ppc_ev0_upper_regnum)); + gdb_assert (sizeof (evrregs.acc) + == register_size (current_gdbarch, tdep->ppc_acc_regnum)); + gdb_assert (sizeof (evrregs.spefscr) + == register_size (current_gdbarch, tdep->ppc_spefscr_regnum)); - if (tdep->ppc_ev0_regnum >= 0 - && tdep->ppc_ev0_regnum <= regno && regno <= tdep->ppc_ev31_regnum) - { - char buf[MAX_REGISTER_SIZE]; - regcache_raw_collect (current_regcache, regno, buf); - write_spliced_spe_reg (tid, regno, &evrregs, buf); - } - else if (tdep->ppc_acc_regnum >= 0 - && regno == tdep->ppc_acc_regnum) - { - gdb_assert (sizeof (evrregs.acc) - == register_size (current_gdbarch, regno)); - regcache_raw_collect (current_regcache, regno, &evrregs.acc); - } - else if (tdep->ppc_spefscr_regnum >= 0 - && regno == tdep->ppc_spefscr_regnum) + if (regno == -1) + /* Since we're going to write out every register, the code below + should store to every field of evrregs; if that doesn't happen, + make it obvious by initializing it with suspicious values. */ + memset (&evrregs, 42, sizeof (evrregs)); + else + /* We can only read and write the entire EVR register set at a + time, so to write just a single register, we do a + read-modify-write maneuver. */ + get_spe_registers (tid, &evrregs); + + if (regno == -1) { - gdb_assert (sizeof (evrregs.spefscr) - == register_size (current_gdbarch, regno)); - regcache_raw_collect (current_regcache, regno, &evrregs.spefscr); + int i; + + for (i = 0; i < ppc_num_gprs; i++) + regcache_raw_collect (current_regcache, + tdep->ppc_ev0_upper_regnum + i, + &evrregs.evr[i]); } - else - gdb_assert (0); + else if (tdep->ppc_ev0_upper_regnum <= regno + && regno < tdep->ppc_ev0_upper_regnum + ppc_num_gprs) + regcache_raw_collect (current_regcache, regno, + &evrregs.evr[regno - tdep->ppc_ev0_upper_regnum]); + + if (regno == -1 + || regno == tdep->ppc_acc_regnum) + regcache_raw_collect (current_regcache, + tdep->ppc_acc_regnum, + &evrregs.acc); + + if (regno == -1 + || regno == tdep->ppc_spefscr_regnum) + regcache_raw_collect (current_regcache, + tdep->ppc_spefscr_regnum, + &evrregs.spefscr); /* Write back the modified register set. */ set_spe_registers (tid, &evrregs); @@ -766,12 +627,6 @@ store_register (int tid, int regno) size_t bytes_to_transfer; char buf[MAX_REGISTER_SIZE]; - /* Sanity check: this function should only be called to store raw - registers' values, never pseudoregisters' values. */ - if (tdep->ppc_gp0_regnum <= regno - && regno < tdep->ppc_gp0_regnum + ppc_num_gprs) - gdb_assert (! tdep->ppc_gprs_pseudo_p); - if (altivec_register_p (regno)) { store_altivec_register (tid, regno); @@ -874,45 +729,14 @@ store_altivec_registers (int tid) perror_with_name ("Couldn't write AltiVec registers"); } -static void -store_spe_registers (int tid) -{ - struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); - struct gdb_evrregset_t evrregs; - int i; - - /* The code below should store to every field of evrregs; if that - doesn't happen, make it obvious by initializing it with - suspicious values. */ - memset (&evrregs, 42, sizeof (evrregs)); - - for (i = 0; i < ppc_num_gprs; i++) - { - char buf[MAX_REGISTER_SIZE]; - - regcache_raw_collect (current_regcache, tdep->ppc_ev0_regnum + i, buf); - write_spliced_spe_reg (tid, tdep->ppc_ev0_regnum + i, &evrregs, buf); - } - - gdb_assert (sizeof (evrregs.acc) - == register_size (current_gdbarch, tdep->ppc_acc_regnum)); - regcache_raw_collect (current_regcache, tdep->ppc_acc_regnum, &evrregs.acc); - gdb_assert (sizeof (evrregs.spefscr) - == register_size (current_gdbarch, tdep->ppc_spefscr_regnum)); - regcache_raw_collect (current_regcache, tdep->ppc_acc_regnum, &evrregs.spefscr); - - set_spe_registers (tid, &evrregs); -} - static void store_ppc_registers (int tid) { int i; struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); - if (! tdep->ppc_gprs_pseudo_p) - for (i = 0; i < ppc_num_gprs; i++) - store_register (tid, tdep->ppc_gp0_regnum + i); + for (i = 0; i < ppc_num_gprs; i++) + store_register (tid, tdep->ppc_gp0_regnum + i); if (tdep->ppc_fp0_regnum >= 0) for (i = 0; i < ppc_num_fprs; i++) store_register (tid, tdep->ppc_fp0_regnum + i); @@ -934,8 +758,8 @@ store_ppc_registers (int tid) if (have_ptrace_getvrregs) if (tdep->ppc_vr0_regnum != -1 && tdep->ppc_vrsave_regnum != -1) store_altivec_registers (tid); - if (tdep->ppc_ev0_regnum >= 0) - store_spe_registers (tid); + if (tdep->ppc_ev0_upper_regnum >= 0) + store_spe_register (tid, -1); } void diff --git a/gdb/ppc-tdep.h b/gdb/ppc-tdep.h index 357c553be34..1a5bc6fbf05 100644 --- a/gdb/ppc-tdep.h +++ b/gdb/ppc-tdep.h @@ -144,7 +144,6 @@ struct gdbarch_tdep int wordsize; /* size in bytes of fixed-point word */ const struct reg *regs; /* from current variant */ int ppc_gp0_regnum; /* GPR register 0 */ - int ppc_gprs_pseudo_p; /* non-zero if GPRs are pseudo-registers */ int ppc_toc_regnum; /* TOC register */ int ppc_ps_regnum; /* Processor (or machine) status (%msr) */ int ppc_cr_regnum; /* Condition register */ @@ -165,6 +164,7 @@ struct gdbarch_tdep int ppc_mq_regnum; /* Multiply/Divide extension register */ int ppc_vr0_regnum; /* First AltiVec register */ int ppc_vrsave_regnum; /* Last AltiVec register */ + int ppc_ev0_upper_regnum; /* First GPR upper half register */ int ppc_ev0_regnum; /* First ev register */ int ppc_ev31_regnum; /* Last ev register */ int ppc_acc_regnum; /* SPE 'acc' register */ diff --git a/gdb/rs6000-tdep.c b/gdb/rs6000-tdep.c index d6f5184cfac..52812d5ad24 100644 --- a/gdb/rs6000-tdep.c +++ b/gdb/rs6000-tdep.c @@ -39,6 +39,7 @@ #include "infcall.h" #include "sim-regno.h" #include "gdb/sim-ppc.h" +#include "reggroups.h" #include "libbfd.h" /* for bfd_default_set_arch_mach */ #include "coff/internal.h" /* for libcoff.h */ @@ -159,6 +160,12 @@ spe_register_p (int regno) && tdep->ppc_ev0_regnum <= regno && regno <= tdep->ppc_ev31_regnum) return 1; + /* Is it a reference to one of the raw upper GPR halves? */ + if (tdep->ppc_ev0_upper_regnum >= 0 + && tdep->ppc_ev0_upper_regnum <= regno + && regno < tdep->ppc_ev0_upper_regnum + ppc_num_gprs) + return 1; + /* Is it a reference to the 64-bit accumulator, and do we have that? */ if (tdep->ppc_acc_regnum >= 0 && tdep->ppc_acc_regnum == regno) @@ -254,6 +261,11 @@ init_sim_regno_table (struct gdbarch *arch) set_sim_regno (sim_regno, tdep->ppc_ev0_regnum + i, sim_ppc_ev0_regnum + i); + if (tdep->ppc_ev0_upper_regnum >= 0) + for (i = 0; i < ppc_num_gprs; i++) + set_sim_regno (sim_regno, + tdep->ppc_ev0_upper_regnum + i, + sim_ppc_rh0_regnum + i); if (tdep->ppc_acc_regnum >= 0) set_sim_regno (sim_regno, tdep->ppc_acc_regnum, sim_ppc_acc_regnum); /* spefscr is a special-purpose register, so the code below handles it. */ @@ -1865,55 +1877,113 @@ rs6000_value_to_register (struct frame_info *frame, put_frame_register (frame, regnum, to); } +/* Move SPE vector register values between a 64-bit buffer and the two + 32-bit raw register halves in a regcache. This function handles + both splitting a 64-bit value into two 32-bit halves, and joining + two halves into a whole 64-bit value, depending on the function + passed as the MOVE argument. + + EV_REG must be the number of an SPE evN vector register --- a + pseudoregister. REGCACHE must be a regcache, and BUFFER must be a + 64-bit buffer. + + Call MOVE once for each 32-bit half of that register, passing + REGCACHE, the number of the raw register corresponding to that + half, and the address of the appropriate half of BUFFER. + + For example, passing 'regcache_raw_read' as the MOVE function will + fill BUFFER with the full 64-bit contents of EV_REG. Or, passing + 'regcache_raw_supply' will supply the contents of BUFFER to the + appropriate pair of raw registers in REGCACHE. + + You may need to cast away some 'const' qualifiers when passing + MOVE, since this function can't tell at compile-time which of + REGCACHE or BUFFER is acting as the source of the data. If C had + co-variant type qualifiers, ... */ +static void +e500_move_ev_register (void (*move) (struct regcache *regcache, + int regnum, void *buf), + struct regcache *regcache, int ev_reg, + void *buffer) +{ + struct gdbarch *arch = get_regcache_arch (regcache); + struct gdbarch_tdep *tdep = gdbarch_tdep (arch); + int reg_index; + char *byte_buffer = buffer; + + gdb_assert (tdep->ppc_ev0_regnum <= ev_reg + && ev_reg < tdep->ppc_ev0_regnum + ppc_num_gprs); + + reg_index = ev_reg - tdep->ppc_ev0_regnum; + + if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) + { + move (regcache, tdep->ppc_ev0_upper_regnum + reg_index, byte_buffer); + move (regcache, tdep->ppc_gp0_regnum + reg_index, byte_buffer + 4); + } + else + { + move (regcache, tdep->ppc_gp0_regnum + reg_index, byte_buffer); + move (regcache, tdep->ppc_ev0_upper_regnum + reg_index, byte_buffer + 4); + } +} + static void e500_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache, int reg_nr, void *buffer) { - int base_regnum; - int offset = 0; - char temp_buffer[MAX_REGISTER_SIZE]; + struct gdbarch *regcache_arch = get_regcache_arch (regcache); struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); - if (reg_nr >= tdep->ppc_gp0_regnum - && reg_nr < tdep->ppc_gp0_regnum + ppc_num_gprs) - { - base_regnum = reg_nr - tdep->ppc_gp0_regnum + tdep->ppc_ev0_regnum; - - /* Build the value in the provided buffer. */ - /* Read the raw register of which this one is the lower portion. */ - regcache_raw_read (regcache, base_regnum, temp_buffer); - if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) - offset = 4; - memcpy ((char *) buffer, temp_buffer + offset, 4); - } + gdb_assert (regcache_arch == gdbarch); + + if (tdep->ppc_ev0_regnum <= reg_nr + && reg_nr < tdep->ppc_ev0_regnum + ppc_num_gprs) + e500_move_ev_register (regcache_raw_read, regcache, reg_nr, buffer); + else + /* We should only be called on pseudo-registers. */ + gdb_assert (0); } static void e500_pseudo_register_write (struct gdbarch *gdbarch, struct regcache *regcache, int reg_nr, const void *buffer) { - int base_regnum; - int offset = 0; - char temp_buffer[MAX_REGISTER_SIZE]; + struct gdbarch *regcache_arch = get_regcache_arch (regcache); struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); - if (reg_nr >= tdep->ppc_gp0_regnum - && reg_nr < tdep->ppc_gp0_regnum + ppc_num_gprs) - { - base_regnum = reg_nr - tdep->ppc_gp0_regnum + tdep->ppc_ev0_regnum; - /* reg_nr is 32 bit here, and base_regnum is 64 bits. */ - if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) - offset = 4; - - /* Let's read the value of the base register into a temporary - buffer, so that overwriting the last four bytes with the new - value of the pseudo will leave the upper 4 bytes unchanged. */ - regcache_raw_read (regcache, base_regnum, temp_buffer); - - /* Write as an 8 byte quantity. */ - memcpy (temp_buffer + offset, (char *) buffer, 4); - regcache_raw_write (regcache, base_regnum, temp_buffer); - } + gdb_assert (regcache_arch == gdbarch); + + if (tdep->ppc_ev0_regnum <= reg_nr + && reg_nr < tdep->ppc_ev0_regnum + ppc_num_gprs) + e500_move_ev_register ((void (*) (struct regcache *, int, void *)) + regcache_raw_write, + regcache, reg_nr, (void *) buffer); + else + /* We should only be called on pseudo-registers. */ + gdb_assert (0); +} + +/* The E500 needs a custom reggroup function: it has anonymous raw + registers, and default_register_reggroup_p assumes that anonymous + registers are not members of any reggroup. */ +static int +e500_register_reggroup_p (struct gdbarch *gdbarch, + int regnum, + struct reggroup *group) +{ + struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); + + /* The save and restore register groups need to include the + upper-half registers, even though they're anonymous. */ + if ((group == save_reggroup + || group == restore_reggroup) + && (tdep->ppc_ev0_upper_regnum <= regnum + && regnum < tdep->ppc_ev0_upper_regnum + ppc_num_gprs)) + return 1; + + /* In all other regards, the default reggroup definition is fine. */ + return default_register_reggroup_p (gdbarch, regnum, group); } /* Convert a DBX STABS register number to a GDB register number. */ @@ -2176,8 +2246,9 @@ rs6000_convert_from_func_ptr_addr (struct gdbarch *gdbarch, /* Return a struct reg defining floating-point register NAME. */ #define F(name) { STR(name), 8, 8, 1, 0, -1 } -/* Return a struct reg defining a pseudo register NAME. */ -#define P(name) { STR(name), 4, 8, 0, 1, -1 } +/* Return a struct reg defining a pseudo register NAME that is 64 bits + long on all systems. */ +#define P8(name) { STR(name), 8, 8, 0, 1, -1 } /* Return a struct reg defining register NAME that's 32 bits on 32-bit systems and that doesn't exist on 64-bit systems. */ @@ -2190,6 +2261,10 @@ rs6000_convert_from_func_ptr_addr (struct gdbarch *gdbarch, /* Return a struct reg placeholder for a register that doesn't exist. */ #define R0 { 0, 0, 0, 0, 0, -1 } +/* Return a struct reg defining an anonymous raw register that's 32 + bits on all systems. */ +#define A4 { 0, 4, 4, 0, 0, -1 } + /* Return a struct reg defining an SPR named NAME that is 32 bits on 32-bit systems and 64 bits on 64-bit systems. */ #define S(name) { STR(name), 4, 8, 0, 0, ppc_spr_ ## name } @@ -2254,19 +2329,38 @@ rs6000_convert_from_func_ptr_addr (struct gdbarch *gdbarch, /*143*/R16(vr24),R16(vr25),R16(vr26),R16(vr27),R16(vr28),R16(vr29),R16(vr30),R16(vr31), \ /*151*/R4(vscr), R4(vrsave) -/* Vectors of hi-lo general purpose registers. */ -#define PPC_EV_REGS \ - /* 0*/R8(ev0), R8(ev1), R8(ev2), R8(ev3), R8(ev4), R8(ev5), R8(ev6), R8(ev7), \ - /* 8*/R8(ev8), R8(ev9), R8(ev10),R8(ev11),R8(ev12),R8(ev13),R8(ev14),R8(ev15), \ - /*16*/R8(ev16),R8(ev17),R8(ev18),R8(ev19),R8(ev20),R8(ev21),R8(ev22),R8(ev23), \ - /*24*/R8(ev24),R8(ev25),R8(ev26),R8(ev27),R8(ev28),R8(ev29),R8(ev30),R8(ev31) -/* Lower half of the EV registers. */ -#define PPC_GPRS_PSEUDO_REGS \ - /* 0 */ P(r0), P(r1), P(r2), P(r3), P(r4), P(r5), P(r6), P(r7), \ - /* 8 */ P(r8), P(r9), P(r10),P(r11),P(r12),P(r13),P(r14),P(r15), \ - /* 16 */ P(r16),P(r17),P(r18),P(r19),P(r20),P(r21),P(r22),P(r23), \ - /* 24 */ P(r24),P(r25),P(r26),P(r27),P(r28),P(r29),P(r30),P(r31) +/* On machines supporting the SPE APU, the general-purpose registers + are 64 bits long. There are SIMD vector instructions to treat them + as pairs of floats, but the rest of the instruction set treats them + as 32-bit registers, and only operates on their lower halves. + + In the GDB regcache, we treat their high and low halves as separate + registers. The low halves we present as the general-purpose + registers, and then we have pseudo-registers that stitch together + the upper and lower halves and present them as pseudo-registers. */ + +/* SPE GPR lower halves --- raw registers. */ +#define PPC_SPE_GP_REGS \ + /* 0 */ R4(r0), R4(r1), R4(r2), R4(r3), R4(r4), R4(r5), R4(r6), R4(r7), \ + /* 8 */ R4(r8), R4(r9), R4(r10),R4(r11),R4(r12),R4(r13),R4(r14),R4(r15), \ + /* 16 */ R4(r16),R4(r17),R4(r18),R4(r19),R4(r20),R4(r21),R4(r22),R4(r23), \ + /* 24 */ R4(r24),R4(r25),R4(r26),R4(r27),R4(r28),R4(r29),R4(r30),R4(r31) + +/* SPE GPR upper halves --- anonymous raw registers. */ +#define PPC_SPE_UPPER_GP_REGS \ + /* 0 */ A4, A4, A4, A4, A4, A4, A4, A4, \ + /* 8 */ A4, A4, A4, A4, A4, A4, A4, A4, \ + /* 16 */ A4, A4, A4, A4, A4, A4, A4, A4, \ + /* 24 */ A4, A4, A4, A4, A4, A4, A4, A4 + +/* SPE GPR vector registers --- pseudo registers based on underlying + gprs and the anonymous upper half raw registers. */ +#define PPC_EV_PSEUDO_REGS \ +/* 0*/P8(ev0), P8(ev1), P8(ev2), P8(ev3), P8(ev4), P8(ev5), P8(ev6), P8(ev7), \ +/* 8*/P8(ev8), P8(ev9), P8(ev10),P8(ev11),P8(ev12),P8(ev13),P8(ev14),P8(ev15),\ +/*16*/P8(ev16),P8(ev17),P8(ev18),P8(ev19),P8(ev20),P8(ev21),P8(ev22),P8(ev23),\ +/*24*/P8(ev24),P8(ev25),P8(ev26),P8(ev27),P8(ev28),P8(ev29),P8(ev30),P8(ev31) /* IBM POWER (pre-PowerPC) architecture, user-level view. We only cover user-level SPR's. */ @@ -2446,16 +2540,14 @@ static const struct reg registers_7400[] = /* Motorola e500. */ static const struct reg registers_e500[] = { - R(pc), R(ps), - /* cr, lr, ctr, xer, "" */ - PPC_UISA_NOFP_SPRS, - /* 7...38 */ - PPC_EV_REGS, - R8(acc), S4(spefscr), + /* 0 .. 31 */ PPC_SPE_GP_REGS, + /* 32 .. 63 */ PPC_SPE_UPPER_GP_REGS, + /* 64 .. 65 */ R(pc), R(ps), + /* 66 .. 70 */ PPC_UISA_NOFP_SPRS, + /* 71 .. 72 */ R8(acc), S4(spefscr), /* NOTE: Add new registers here the end of the raw register list and just before the first pseudo register. */ - /* 41...72 */ - PPC_GPRS_PSEUDO_REGS + /* 73 .. 104 */ PPC_EV_PSEUDO_REGS }; /* Information about a particular processor variant. */ @@ -2987,7 +3079,6 @@ rs6000_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) tdep->regs = v->regs; tdep->ppc_gp0_regnum = 0; - tdep->ppc_gprs_pseudo_p = 0; tdep->ppc_toc_regnum = 2; tdep->ppc_ps_regnum = 65; tdep->ppc_cr_regnum = 66; @@ -3005,6 +3096,7 @@ rs6000_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) tdep->ppc_sr0_regnum = 71; tdep->ppc_vr0_regnum = -1; tdep->ppc_vrsave_regnum = -1; + tdep->ppc_ev0_upper_regnum = -1; tdep->ppc_ev0_regnum = -1; tdep->ppc_ev31_regnum = -1; tdep->ppc_acc_regnum = -1; @@ -3047,26 +3139,18 @@ rs6000_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) tdep->ppc_vrsave_regnum = 152; break; case bfd_mach_ppc_e500: - tdep->ppc_gp0_regnum = 41; - tdep->ppc_gprs_pseudo_p = 1; tdep->ppc_toc_regnum = -1; - tdep->ppc_ps_regnum = 1; - tdep->ppc_cr_regnum = 2; - tdep->ppc_lr_regnum = 3; - tdep->ppc_ctr_regnum = 4; - tdep->ppc_xer_regnum = 5; - tdep->ppc_ev0_regnum = 7; - tdep->ppc_ev31_regnum = 38; + tdep->ppc_ev0_upper_regnum = 32; + tdep->ppc_ev0_regnum = 73; + tdep->ppc_ev31_regnum = 104; + tdep->ppc_acc_regnum = 71; + tdep->ppc_spefscr_regnum = 72; tdep->ppc_fp0_regnum = -1; tdep->ppc_fpscr_regnum = -1; tdep->ppc_sr0_regnum = -1; - tdep->ppc_acc_regnum = 39; - tdep->ppc_spefscr_regnum = 40; - set_gdbarch_pc_regnum (gdbarch, 0); - set_gdbarch_sp_regnum (gdbarch, tdep->ppc_gp0_regnum + 1); - set_gdbarch_deprecated_fp_regnum (gdbarch, tdep->ppc_gp0_regnum + 1); set_gdbarch_pseudo_register_read (gdbarch, e500_pseudo_register_read); set_gdbarch_pseudo_register_write (gdbarch, e500_pseudo_register_write); + set_gdbarch_register_reggroup_p (gdbarch, e500_register_reggroup_p); break; case bfd_mach_ppc64: