From: Richard Sandiford Date: Fri, 15 Dec 2017 13:12:25 +0000 (+0000) Subject: Make dse.c use offset/width instead of start/end X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=71d6a38638e4188974703d3d4ffeeedb1295a70c;p=gcc.git Make dse.c use offset/width instead of start/end store_info and read_info_type in dse.c represented the ranges as start/end, but a lot of the internal code used offset/width instead. Using offset/width throughout fits better with the poly_int.h range-checking functions. 2017-12-15 Richard Sandiford Alan Hayward David Sherwood gcc/ * dse.c (store_info, read_info_type): Replace begin and end with offset and width. (print_range): New function. (set_all_positions_unneeded, any_positions_needed_p) (check_mem_read_rtx, scan_stores, scan_reads, dse_step5): Update accordingly. (record_store): Likewise. Optimize the case in which all positions are unneeded. (get_stored_val): Replace read_begin and read_end with read_offset and read_width. (replace_read): Update call accordingly. Co-Authored-By: Alan Hayward Co-Authored-By: David Sherwood From-SVN: r255692 --- diff --git a/gcc/ChangeLog b/gcc/ChangeLog index 5908dd55679..e83d5beaa1a 100644 --- a/gcc/ChangeLog +++ b/gcc/ChangeLog @@ -1,3 +1,19 @@ +2017-12-15 Richard Sandiford + Alan Hayward + David Sherwood + + * dse.c (store_info, read_info_type): Replace begin and end with + offset and width. + (print_range): New function. + (set_all_positions_unneeded, any_positions_needed_p) + (check_mem_read_rtx, scan_stores, scan_reads, dse_step5): Update + accordingly. + (record_store): Likewise. Optimize the case in which all positions + are unneeded. + (get_stored_val): Replace read_begin and read_end with read_offset + and read_width. + (replace_read): Update call accordingly. + 2017-12-15 Bin Cheng * gimple-loop-interchange.cc (STMT_COST_RATIO): New macro. diff --git a/gcc/dse.c b/gcc/dse.c index 1b34f4f0285..fbc6b25ac1e 100644 --- a/gcc/dse.c +++ b/gcc/dse.c @@ -243,9 +243,12 @@ struct store_info /* Canonized MEM address for use by canon_true_dependence. */ rtx mem_addr; - /* The offset of the first and byte before the last byte associated - with the operation. */ - HOST_WIDE_INT begin, end; + /* The offset of the first byte associated with the operation. */ + HOST_WIDE_INT offset; + + /* The number of bytes covered by the operation. This is always exact + and known (rather than -1). */ + HOST_WIDE_INT width; union { @@ -261,7 +264,7 @@ struct store_info bitmap bmap; /* Number of set bits (i.e. unneeded bytes) in BITMAP. If it is - equal to END - BEGIN, the whole store is unused. */ + equal to WIDTH, the whole store is unused. */ int count; } large; } positions_needed; @@ -304,10 +307,11 @@ struct read_info_type /* The id of the mem group of the base address. */ int group_id; - /* The offset of the first and byte after the last byte associated - with the operation. If begin == end == 0, the read did not have - a constant offset. */ - int begin, end; + /* The offset of the first byte associated with the operation. */ + HOST_WIDE_INT offset; + + /* The number of bytes covered by the operation, or -1 if not known. */ + HOST_WIDE_INT width; /* The mem being read. */ rtx mem; @@ -586,6 +590,18 @@ static bitmap kill_on_calls; /* The number of bits used in the global bitmaps. */ static unsigned int current_position; + +/* Print offset range [OFFSET, OFFSET + WIDTH) to FILE. */ + +static void +print_range (FILE *file, poly_int64 offset, poly_int64 width) +{ + fprintf (file, "["); + print_dec (offset, file, SIGNED); + fprintf (file, ".."); + print_dec (offset + width, file, SIGNED); + fprintf (file, ")"); +} /*---------------------------------------------------------------------------- Zeroth step. @@ -1212,10 +1228,9 @@ set_all_positions_unneeded (store_info *s_info) { if (__builtin_expect (s_info->is_large, false)) { - int pos, end = s_info->end - s_info->begin; - for (pos = 0; pos < end; pos++) - bitmap_set_bit (s_info->positions_needed.large.bmap, pos); - s_info->positions_needed.large.count = end; + bitmap_set_range (s_info->positions_needed.large.bmap, + 0, s_info->width); + s_info->positions_needed.large.count = s_info->width; } else s_info->positions_needed.small_bitmask = HOST_WIDE_INT_0U; @@ -1227,8 +1242,7 @@ static inline bool any_positions_needed_p (store_info *s_info) { if (__builtin_expect (s_info->is_large, false)) - return (s_info->positions_needed.large.count - < s_info->end - s_info->begin); + return s_info->positions_needed.large.count < s_info->width; else return (s_info->positions_needed.small_bitmask != HOST_WIDE_INT_0U); } @@ -1361,8 +1375,12 @@ record_store (rtx body, bb_info_t bb_info) set_usage_bits (group, offset, width, expr); if (dump_file && (dump_flags & TDF_DETAILS)) - fprintf (dump_file, " processing const base store gid=%d[%d..%d)\n", - group_id, (int)offset, (int)(offset+width)); + { + fprintf (dump_file, " processing const base store gid=%d", + group_id); + print_range (dump_file, offset, width); + fprintf (dump_file, "\n"); + } } else { @@ -1374,8 +1392,11 @@ record_store (rtx body, bb_info_t bb_info) group_id = -1; if (dump_file && (dump_flags & TDF_DETAILS)) - fprintf (dump_file, " processing cselib store [%d..%d)\n", - (int)offset, (int)(offset+width)); + { + fprintf (dump_file, " processing cselib store "); + print_range (dump_file, offset, width); + fprintf (dump_file, "\n"); + } } const_rhs = rhs = NULL_RTX; @@ -1441,18 +1462,21 @@ record_store (rtx body, bb_info_t bb_info) { HOST_WIDE_INT i; if (dump_file && (dump_flags & TDF_DETAILS)) - fprintf (dump_file, " trying store in insn=%d gid=%d[%d..%d)\n", - INSN_UID (ptr->insn), s_info->group_id, - (int)s_info->begin, (int)s_info->end); + { + fprintf (dump_file, " trying store in insn=%d gid=%d", + INSN_UID (ptr->insn), s_info->group_id); + print_range (dump_file, s_info->offset, s_info->width); + fprintf (dump_file, "\n"); + } /* Even if PTR won't be eliminated as unneeded, if both PTR and this insn store the same constant value, we might eliminate this insn instead. */ if (s_info->const_rhs && const_rhs - && offset >= s_info->begin - && offset + width <= s_info->end - && all_positions_needed_p (s_info, offset - s_info->begin, + && known_subrange_p (offset, width, + s_info->offset, s_info->width) + && all_positions_needed_p (s_info, offset - s_info->offset, width)) { if (GET_MODE (mem) == BLKmode) @@ -1468,8 +1492,7 @@ record_store (rtx body, bb_info_t bb_info) { rtx val; start_sequence (); - val = get_stored_val (s_info, GET_MODE (mem), - offset, offset + width, + val = get_stored_val (s_info, GET_MODE (mem), offset, width, BLOCK_FOR_INSN (insn_info->insn), true); if (get_insns () != NULL) @@ -1480,10 +1503,18 @@ record_store (rtx body, bb_info_t bb_info) } } - for (i = MAX (offset, s_info->begin); - i < offset + width && i < s_info->end; - i++) - set_position_unneeded (s_info, i - s_info->begin); + if (known_subrange_p (s_info->offset, s_info->width, offset, width)) + /* The new store touches every byte that S_INFO does. */ + set_all_positions_unneeded (s_info); + else + { + HOST_WIDE_INT begin_unneeded = offset - s_info->offset; + HOST_WIDE_INT end_unneeded = begin_unneeded + width; + begin_unneeded = MAX (begin_unneeded, 0); + end_unneeded = MIN (end_unneeded, s_info->width); + for (i = begin_unneeded; i < end_unneeded; ++i) + set_position_unneeded (s_info, i); + } } else if (s_info->rhs) /* Need to see if it is possible for this store to overwrite @@ -1541,8 +1572,8 @@ record_store (rtx body, bb_info_t bb_info) store_info->positions_needed.small_bitmask = lowpart_bitmask (width); } store_info->group_id = group_id; - store_info->begin = offset; - store_info->end = offset + width; + store_info->offset = offset; + store_info->width = width; store_info->is_set = GET_CODE (body) == SET; store_info->rhs = rhs; store_info->const_rhs = const_rhs; @@ -1704,39 +1735,38 @@ look_for_hardregs (rtx x, const_rtx pat ATTRIBUTE_UNUSED, void *data) } /* Helper function for replace_read and record_store. - Attempt to return a value stored in STORE_INFO, from READ_BEGIN - to one before READ_END bytes read in READ_MODE. Return NULL + Attempt to return a value of mode READ_MODE stored in STORE_INFO, + consisting of READ_WIDTH bytes starting from READ_OFFSET. Return NULL if not successful. If REQUIRE_CST is true, return always constant. */ static rtx get_stored_val (store_info *store_info, machine_mode read_mode, - HOST_WIDE_INT read_begin, HOST_WIDE_INT read_end, + HOST_WIDE_INT read_offset, HOST_WIDE_INT read_width, basic_block bb, bool require_cst) { machine_mode store_mode = GET_MODE (store_info->mem); - int shift; - int access_size; /* In bytes. */ + HOST_WIDE_INT gap; rtx read_reg; /* To get here the read is within the boundaries of the write so shift will never be negative. Start out with the shift being in bytes. */ if (store_mode == BLKmode) - shift = 0; + gap = 0; else if (BYTES_BIG_ENDIAN) - shift = store_info->end - read_end; + gap = ((store_info->offset + store_info->width) + - (read_offset + read_width)); else - shift = read_begin - store_info->begin; - - access_size = shift + GET_MODE_SIZE (read_mode); - - /* From now on it is bits. */ - shift *= BITS_PER_UNIT; + gap = read_offset - store_info->offset; - if (shift) - read_reg = find_shift_sequence (access_size, store_info, read_mode, shift, - optimize_bb_for_speed_p (bb), - require_cst); + if (gap != 0) + { + HOST_WIDE_INT shift = gap * BITS_PER_UNIT; + HOST_WIDE_INT access_size = GET_MODE_SIZE (read_mode) + gap; + read_reg = find_shift_sequence (access_size, store_info, read_mode, + shift, optimize_bb_for_speed_p (bb), + require_cst); + } else if (store_mode == BLKmode) { /* The store is a memset (addr, const_val, const_size). */ @@ -1839,7 +1869,7 @@ replace_read (store_info *store_info, insn_info_t store_insn, start_sequence (); bb = BLOCK_FOR_INSN (read_insn->insn); read_reg = get_stored_val (store_info, - read_mode, read_info->begin, read_info->end, + read_mode, read_info->offset, read_info->width, bb, false); if (read_reg == NULL_RTX) { @@ -2000,8 +2030,8 @@ check_mem_read_rtx (rtx *loc, bb_info_t bb_info) read_info = read_info_type_pool.allocate (); read_info->group_id = group_id; read_info->mem = mem; - read_info->begin = offset; - read_info->end = offset + width; + read_info->offset = offset; + read_info->width = width; read_info->next = insn_info->read_rec; insn_info->read_rec = read_info; if (group_id < 0) @@ -2027,8 +2057,11 @@ check_mem_read_rtx (rtx *loc, bb_info_t bb_info) fprintf (dump_file, " processing const load gid=%d[BLK]\n", group_id); else - fprintf (dump_file, " processing const load gid=%d[%d..%d)\n", - group_id, (int)offset, (int)(offset+width)); + { + fprintf (dump_file, " processing const load gid=%d", group_id); + print_range (dump_file, offset, width); + fprintf (dump_file, "\n"); + } } while (i_ptr) @@ -2066,19 +2099,20 @@ check_mem_read_rtx (rtx *loc, bb_info_t bb_info) else { if (store_info->rhs - && offset >= store_info->begin - && offset + width <= store_info->end + && known_subrange_p (offset, width, store_info->offset, + store_info->width) && all_positions_needed_p (store_info, - offset - store_info->begin, + offset - store_info->offset, width) && replace_read (store_info, i_ptr, read_info, insn_info, loc, bb_info->regs_live)) return; /* The bases are the same, just see if the offsets - overlap. */ - if ((offset < store_info->end) - && (offset + width > store_info->begin)) + could overlap. */ + if (ranges_maybe_overlap_p (offset, width, + store_info->offset, + store_info->width)) remove = true; } } @@ -2133,11 +2167,10 @@ check_mem_read_rtx (rtx *loc, bb_info_t bb_info) if (store_info->rhs && store_info->group_id == -1 && store_info->cse_base == base - && width != -1 - && offset >= store_info->begin - && offset + width <= store_info->end + && known_subrange_p (offset, width, store_info->offset, + store_info->width) && all_positions_needed_p (store_info, - offset - store_info->begin, width) + offset - store_info->offset, width) && replace_read (store_info, i_ptr, read_info, insn_info, loc, bb_info->regs_live)) return; @@ -2789,16 +2822,19 @@ scan_stores (store_info *store_info, bitmap gen, bitmap kill) group_info *group_info = rtx_group_vec[store_info->group_id]; if (group_info->process_globally) - for (i = store_info->begin; i < store_info->end; i++) - { - int index = get_bitmap_index (group_info, i); - if (index != 0) - { - bitmap_set_bit (gen, index); - if (kill) - bitmap_clear_bit (kill, index); - } - } + { + HOST_WIDE_INT end = store_info->offset + store_info->width; + for (i = store_info->offset; i < end; i++) + { + int index = get_bitmap_index (group_info, i); + if (index != 0) + { + bitmap_set_bit (gen, index); + if (kill) + bitmap_clear_bit (kill, index); + } + } + } store_info = store_info->next; } } @@ -2848,9 +2884,9 @@ scan_reads (insn_info_t insn_info, bitmap gen, bitmap kill) { if (i == read_info->group_id) { - if (read_info->begin > read_info->end) + if (!known_size_p (read_info->width)) { - /* Begin > end for block mode reads. */ + /* Handle block mode reads. */ if (kill) bitmap_ior_into (kill, group->group_kill); bitmap_and_compl_into (gen, group->group_kill); @@ -2860,7 +2896,8 @@ scan_reads (insn_info_t insn_info, bitmap gen, bitmap kill) /* The groups are the same, just process the offsets. */ HOST_WIDE_INT j; - for (j = read_info->begin; j < read_info->end; j++) + HOST_WIDE_INT end = read_info->offset + read_info->width; + for (j = read_info->offset; j < end; j++) { int index = get_bitmap_index (group, j); if (index != 0) @@ -3279,7 +3316,8 @@ dse_step5 (void) HOST_WIDE_INT i; group_info *group_info = rtx_group_vec[store_info->group_id]; - for (i = store_info->begin; i < store_info->end; i++) + HOST_WIDE_INT end = store_info->offset + store_info->width; + for (i = store_info->offset; i < end; i++) { int index = get_bitmap_index (group_info, i);