From: David D. Zuhn Date: Mon, 23 Aug 1993 19:39:56 +0000 (+0000) Subject: remove Sanitize markers X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=72545cc6bde2fe4c824947dea29b2aad9786bb3f;p=binutils-gdb.git remove Sanitize markers --- diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo index e31b01a3d8b..6a4e10728de 100644 --- a/gdb/doc/gdb.texinfo +++ b/gdb/doc/gdb.texinfo @@ -6624,15 +6624,9 @@ download @var{filename} to the 960 as well as adding its symbols in @ifset H8 @cindex download to H8/300 or H8/500 @cindex H8/300 or H8/500 download -@c start-sanitize-Hitachi-SH @cindex download to Hitachi SH @cindex Hitachi SH download -@c end-sanitize-Hitachi-SH -When you select remote debugging to a Hitachi -@c start-sanitize-Hitachi-SH -SH, -@c end-sanitize-Hitachi-SH -H8/300, or H8/500 board +When you select remote debugging to a Hitachi SH, H8/300, or H8/500 board (@pxref{Hitachi Remote,,@value{GDBN} and Hitachi Microprocessors}), the @code{load} command downloads your program to the Hitachi board and also opens it as the current executable target for @value{GDBN} on your host @@ -6971,11 +6965,7 @@ name of the program to be debugged, as it appears to DOS on the PC. @ifset H8 @item target hms @kindex target hms -A Hitachi -@c start-sanitize-Hitachi-SH -SH, -@c end-sanitize-Hitachi-SH -H8/300, or H8/500 board, attached via serial line to your host. +A Hitachi SH, H8/300, or H8/500 board, attached via serial line to your host. @ifclear H8EXCLUSIVE @c Unix only, not currently of interest for H8-only manual Use special commands @code{device} and @code{speed} to control the serial