From: Ian Lance Taylor Date: Sat, 6 Jun 1998 03:42:14 +0000 (+0000) Subject: Fri Jun 5 23:27:04 1998 Alan Modra X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=73a8be66ca69a2ee21d33fe434aefd1291821f61;p=binutils-gdb.git Fri Jun 5 23:27:04 1998 Alan Modra * config/tc-i386.c (mode_from_disp_size): Disp16 is mode 2. (i386_operand): Simplify checks for valid base/index combinations. Disallow `in 4(%dx),%al'. * config/tc-i386.c (struct _i386_insn): Make regs, base_reg, and index_reg const. (add_prefix): Change parameter from char to int. * config/tc-i386.h (Ugh): Define opcode modifier. * config/tc-i386.c (md_assemble): Print warnings for Ugh insns. * config/tc-i386.c (md_assemble): Rewrite MATCH and CONSISTENT_REGISTER_MATCH macros to check register types more thoroughly. Check for illegal suffix/operand combinations when matching insns with operands. Handle new `s' suffix, and associated FloatMF opcode modifier for float insns with memory operands. * config/tc-i386.h (FloatMF): Define new opcode modifier. (No_sSuf, No_bSuf, No_wSuf, No_lSuf): Likewise. (SHORT_OPCODE_SUFFIX, LONG_OPCODE_SUFFIX): Define. * config/tc-i386.c: Rename WORD_PREFIX_OPCODE to DATA_PREFIX_OPCODE throughout. * config/tc-i386.c (REGISTER_WARNINGS): Define. (md_assemble): Rewrite suffix/register operand checking code to be more thorough. Remove Abs8,16,32. Change occurrences of Mem to AnyMem, the better to grep. (pi): Remove Abs. (i386_operand): Don't set Mem bits in i.types[this_operand] when given a memory operand. Don't set Abs bits either. (type_names): Remove Mem*, Abs*. * config/tc-i386.h (Mem8, Mem16, Mem32, Abs8, Abs16, Abs32): Don't define opcode_modifiers as these cases are handled by Disp8, Disp16, Disp32 and suffix checks. (COMES_IN_BOTH_DIRECTIONS): Remove. (FloatR): Define. It's OK to share the bit with ReverseRegRegmem. * config/tc-i386.c (md_assemble): Don't emit operand size prefix if IgnoreDataSize modifier given. Remove ShortformW modifier test. Add test for ShortForm in W base_opcode modification. Merge Seg2ShortForm and Seg3ShortForm code. * config/tc-i386.h (ShortFormW): Remove. (IgnoreDataSize): Define. --- diff --git a/gas/ChangeLog b/gas/ChangeLog index 178c2e75b68..35a1387ec82 100644 --- a/gas/ChangeLog +++ b/gas/ChangeLog @@ -1,3 +1,49 @@ +Fri Jun 5 23:27:04 1998 Alan Modra + + * config/tc-i386.c (mode_from_disp_size): Disp16 is mode 2. + (i386_operand): Simplify checks for valid base/index combinations. + Disallow `in 4(%dx),%al'. + + * config/tc-i386.c (struct _i386_insn): Make regs, base_reg, and + index_reg const. + (add_prefix): Change parameter from char to int. + + * config/tc-i386.h (Ugh): Define opcode modifier. + * config/tc-i386.c (md_assemble): Print warnings for Ugh insns. + + * config/tc-i386.c (md_assemble): Rewrite MATCH and + CONSISTENT_REGISTER_MATCH macros to check register types more + thoroughly. Check for illegal suffix/operand combinations + when matching insns with operands. Handle new `s' suffix, and + associated FloatMF opcode modifier for float insns with memory + operands. + * config/tc-i386.h (FloatMF): Define new opcode modifier. + (No_sSuf, No_bSuf, No_wSuf, No_lSuf): Likewise. + (SHORT_OPCODE_SUFFIX, LONG_OPCODE_SUFFIX): Define. + * config/tc-i386.c: Rename WORD_PREFIX_OPCODE to + DATA_PREFIX_OPCODE throughout. + + * config/tc-i386.c (REGISTER_WARNINGS): Define. + (md_assemble): Rewrite suffix/register operand checking code to be + more thorough. Remove Abs8,16,32. Change occurrences of Mem to + AnyMem, the better to grep. + (pi): Remove Abs. + (i386_operand): Don't set Mem bits in i.types[this_operand] when + given a memory operand. Don't set Abs bits either. + (type_names): Remove Mem*, Abs*. + * config/tc-i386.h (Mem8, Mem16, Mem32, Abs8, Abs16, Abs32): Don't + define opcode_modifiers as these cases are handled by Disp8, + Disp16, Disp32 and suffix checks. + (COMES_IN_BOTH_DIRECTIONS): Remove. + (FloatR): Define. It's OK to share the bit with ReverseRegRegmem. + + * config/tc-i386.c (md_assemble): Don't emit operand size prefix + if IgnoreDataSize modifier given. Remove ShortformW modifier + test. Add test for ShortForm in W base_opcode modification. + Merge Seg2ShortForm and Seg3ShortForm code. + * config/tc-i386.h (ShortFormW): Remove. + (IgnoreDataSize): Define. + Fri Jun 5 10:50:53 1998 Nick Clifton * config/tc-d30v.c (md_assemble): Store previous segment state diff --git a/gas/config/tc-i386.c b/gas/config/tc-i386.c index 9de4f9ee4f8..0a393e27618 100644 --- a/gas/config/tc-i386.c +++ b/gas/config/tc-i386.c @@ -38,6 +38,10 @@ #define TC_RELOC(X,Y) (Y) #endif +#ifndef REGISTER_WARNINGS +#define REGISTER_WARNINGS 1 +#endif + #ifndef SCALE1_WHEN_NO_INDEX /* Specifying a scale factor besides 1 when there is no index is futile. eg. `mov (%ebx,2),%al' does exactly the same as @@ -52,7 +56,7 @@ static int fits_in_unsigned_byte PARAMS ((long)); static int fits_in_unsigned_word PARAMS ((long)); static int fits_in_signed_word PARAMS ((long)); static int smallest_imm_type PARAMS ((long)); -static int add_prefix PARAMS ((unsigned char)); +static int add_prefix PARAMS ((unsigned int)); static void set_16bit_code_flag PARAMS ((int)); #ifdef BFD_ASSEMBLER static bfd_reloc_code_real_type reloc @@ -66,8 +70,10 @@ struct _i386_insn { /* TM holds the template for the insn were currently assembling. */ template tm; + /* SUFFIX holds the opcode suffix (e.g. 'l' for 'movl') if given. */ char suffix; + /* Operands are coded with OPERANDS, TYPES, DISPS, IMMS, and REGS. */ /* OPERANDS gives the number of given operands. */ @@ -97,12 +103,12 @@ struct _i386_insn expressionS *imms[MAX_OPERANDS]; /* Register operands (if given) for each operand. */ - reg_entry *regs[MAX_OPERANDS]; + const reg_entry *regs[MAX_OPERANDS]; /* BASE_REG, INDEX_REG, and LOG2_SCALE_FACTOR are used to encode the base index byte below. */ - reg_entry *base_reg; - reg_entry *index_reg; + const reg_entry *base_reg; + const reg_entry *index_reg; unsigned int log2_scale_factor; /* SEG gives the seg_entries of this insn. They are zero unless @@ -115,7 +121,7 @@ struct _i386_insn unsigned char prefix[MAX_PREFIXES]; /* RM and BI are the modrm byte and the base index byte where the - addressing modes of this insn are encoded. */ + addressing modes of this insn are encoded. */ modrm_byte rm; base_index_byte bi; @@ -363,7 +369,7 @@ static INLINE unsigned long mode_from_disp_size (t) unsigned long t; { - return (t & Disp8) ? 1 : (t & Disp32) ? 2 : 0; + return (t & Disp8) ? 1 : (t & (Disp16|Disp32)) ? 2 : 0; } #if 0 @@ -436,13 +442,16 @@ smallest_imm_type (num) added. */ static int add_prefix (prefix) - unsigned char prefix; + unsigned int prefix; { int ret = 1; int q; switch (prefix) { + default: + abort (); + case CS_PREFIX_OPCODE: case DS_PREFIX_OPCODE: case ES_PREFIX_OPCODE: @@ -468,8 +477,9 @@ add_prefix (prefix) q = ADDR_PREFIX; break; - case WORD_PREFIX_OPCODE: + case DATA_PREFIX_OPCODE: q = DATA_PREFIX; + break; } if (i.prefix[q]) @@ -702,7 +712,7 @@ pi (line, x) fprintf (stdout, "%s\n", x->regs[i]->reg_name); if (x->types[i] & Imm) pe (x->imms[i]); - if (x->types[i] & (Disp | Abs)) + if (x->types[i] & Disp) pe (x->disps[i]); } } @@ -776,27 +786,21 @@ type_names[] = { Imm8S, "i8s" }, { Imm16, "i16" }, { Imm32, "i32" }, - { Mem8, "Mem8" }, - { Mem16, "Mem16" }, - { Mem32, "Mem32" }, + { Imm1, "i1" }, { BaseIndex, "BaseIndex" }, - { Abs8, "Abs8" }, - { Abs16, "Abs16" }, - { Abs32, "Abs32" }, { Disp8, "d8" }, { Disp16, "d16" }, { Disp32, "d32" }, - { SReg2, "SReg2" }, - { SReg3, "SReg3" }, - { Acc, "Acc" }, { InOutPortReg, "InOutPortReg" }, { ShiftCount, "ShiftCount" }, - { Imm1, "i1" }, { Control, "control reg" }, { Test, "test reg" }, { Debug, "debug reg" }, { FloatReg, "FReg" }, { FloatAcc, "FAcc" }, + { SReg2, "SReg2" }, + { SReg3, "SReg3" }, + { Acc, "Acc" }, { JumpAbsolute, "Jump Absolute" }, { RegMMX, "rMMX" }, { EsSeg, "es" }, @@ -961,7 +965,8 @@ md_assemble (line) /* add prefix, checking for repeated prefixes */ switch (add_prefix (prefix->prefix_code)) { - case 0: return; + case 0: + return; case 2: expecting_string_instruction = prefix->prefix_name; break; @@ -990,6 +995,10 @@ md_assemble (line) case DWORD_OPCODE_SUFFIX: case WORD_OPCODE_SUFFIX: case BYTE_OPCODE_SUFFIX: + case SHORT_OPCODE_SUFFIX: +#if LONG_OPCODE_SUFFIX != DWORD_OPCODE_SUFFIX + case LONG_OPCODE_SUFFIX: +#endif token_start[last_index] = '\0'; current_templates = (templates *) hash_find (op_hash, token_start); token_start[last_index] = last_char; @@ -1005,8 +1014,8 @@ md_assemble (line) RESTORE_END_STRING (l); /* check for rep/repne without a string instruction */ - if (expecting_string_instruction && - !(current_templates->start->opcode_modifier & IsString)) + if (expecting_string_instruction + && !(current_templates->start->opcode_modifier & IsString)) { as_bad (_("expecting string instruction after `%s'"), expecting_string_instruction); @@ -1112,42 +1121,46 @@ md_assemble (line) making sure the overlap of the given operands types is consistent with the template operand types. */ -#define MATCH(overlap,given_type) \ - (overlap \ - && ((overlap & (JumpAbsolute|BaseIndex|Mem8)) \ - == (given_type & (JumpAbsolute|BaseIndex|Mem8)))) - - /* If m0 and m1 are register matches they must be consistent - with the expected operand types t0 and t1. - That is, if both m0 & m1 are register matches - i.e. ( ((m0 & (Reg)) && (m1 & (Reg)) ) ? - then, either 1. or 2. must be true: - 1. the expected operand type register overlap is null: - (t0 & t1 & Reg) == 0 - AND - the given register overlap is null: - (m0 & m1 & Reg) == 0 - 2. the expected operand type register overlap == the given - operand type overlap: (t0 & t1 & m0 & m1 & Reg). - */ -#define CONSISTENT_REGISTER_MATCH(m0, m1, t0, t1) \ - ( ((m0 & (Reg)) && (m1 & (Reg))) ? \ - ( ((t0 & t1 & (Reg)) == 0 && (m0 & m1 & (Reg)) == 0) || \ - ((t0 & t1) & (m0 & m1) & (Reg)) \ - ) : 1) +#define MATCH(overlap, given, template) \ + ((overlap) \ + && (((overlap) & (JumpAbsolute|BaseIndex)) \ + == ((given) & (JumpAbsolute|BaseIndex)))) + + + /* If given types r0 and r1 are registers they must be of the same type + unless the expected operand type register overlap is null. + Note that Acc in a template matches every size of reg. */ +#define CONSISTENT_REGISTER_MATCH(m0, g0, t0, m1, g1, t1) \ + ( ((g0) & Reg) == 0 || ((g1) & Reg) == 0 || \ + ((g0) & Reg) == ((g1) & Reg) || \ + ((((m0) & Acc) ? Reg : (t0)) & (((m1) & Acc) ? Reg : (t1)) & Reg) == 0 ) + { register unsigned int overlap0, overlap1; expressionS *exp; unsigned int overlap2; unsigned int found_reverse_match; + int suffix_check; + + overlap0 = 0; + overlap1 = 0; + overlap2 = 0; + found_reverse_match = 0; + suffix_check = (i.suffix == BYTE_OPCODE_SUFFIX + ? No_bSuf + : (i.suffix == WORD_OPCODE_SUFFIX + ? No_wSuf + : (i.suffix == SHORT_OPCODE_SUFFIX + ? No_sSuf + : (i.suffix == LONG_OPCODE_SUFFIX ? No_lSuf : 0)))); - overlap0 = overlap1 = overlap2 = found_reverse_match = 0; for (t = current_templates->start; t < current_templates->end; t++) { - /* must have right number of operands */ - if (i.operands != t->operands) + /* Must have right number of operands, and must not have + disallowed suffix. */ + if (i.operands != t->operands || (t->opcode_modifier & suffix_check)) continue; else if (!t->operands) break; /* 0 operands always matches */ @@ -1156,50 +1169,55 @@ md_assemble (line) switch (t->operands) { case 1: - if (!MATCH (overlap0, i.types[0])) + if (!MATCH (overlap0, i.types[0], t->operand_types[0])) continue; break; case 2: case 3: overlap1 = i.types[1] & t->operand_types[1]; - if (!MATCH (overlap0, i.types[0]) || - !MATCH (overlap1, i.types[1]) || - !CONSISTENT_REGISTER_MATCH (overlap0, overlap1, - t->operand_types[0], - t->operand_types[1])) + if (!MATCH (overlap0, i.types[0], t->operand_types[0]) + || !MATCH (overlap1, i.types[1], t->operand_types[1]) + || !CONSISTENT_REGISTER_MATCH (overlap0, i.types[0], + t->operand_types[0], + overlap1, i.types[1], + t->operand_types[1])) { /* check if other direction is valid ... */ - if (!(t->opcode_modifier & COMES_IN_BOTH_DIRECTIONS)) + if ((t->opcode_modifier & (D|FloatD)) == 0) continue; /* try reversing direction of operands */ overlap0 = i.types[0] & t->operand_types[1]; overlap1 = i.types[1] & t->operand_types[0]; - if (!MATCH (overlap0, i.types[0]) || - !MATCH (overlap1, i.types[1]) || - !CONSISTENT_REGISTER_MATCH (overlap0, overlap1, - t->operand_types[1], - t->operand_types[0])) + if (!MATCH (overlap0, i.types[0], t->operand_types[1]) + || !MATCH (overlap1, i.types[1], t->operand_types[0]) + || !CONSISTENT_REGISTER_MATCH (overlap0, i.types[0], + t->operand_types[1], + overlap1, i.types[1], + t->operand_types[0])) { /* does not match either direction */ continue; } - /* found a reverse match here -- slip through */ - /* found_reverse_match holds which of D or FloatD we've found */ - found_reverse_match = t->opcode_modifier & COMES_IN_BOTH_DIRECTIONS; - } /* endif: not forward match */ - /* found either forward/reverse 2 operand match here */ + /* found_reverse_match holds which of D or FloatDR + we've found. */ + found_reverse_match = t->opcode_modifier & (D|FloatDR); + break; + } + /* found a forward 2 operand match here */ if (t->operands == 3) { + /* Here we make use of the fact that there are no + reverse match 3 operand instructions, and all 3 + operand instructions only need to be checked for + register consistency between operands 2 and 3. */ overlap2 = i.types[2] & t->operand_types[2]; - if (!MATCH (overlap2, i.types[2]) || - !CONSISTENT_REGISTER_MATCH (overlap0, overlap2, - t->operand_types[0], - t->operand_types[2]) || - !CONSISTENT_REGISTER_MATCH (overlap1, overlap2, - t->operand_types[1], - t->operand_types[2])) + if (!MATCH (overlap2, i.types[2], t->operand_types[2]) + || !CONSISTENT_REGISTER_MATCH (overlap1, i.types[1], + t->operand_types[1], + overlap2, i.types[2], + t->operand_types[2])) continue; } /* found either forward/reverse 2 or 3 operand match here: @@ -1216,23 +1234,23 @@ md_assemble (line) /* Copy the template we found. */ i.tm = *t; - if (i.tm.opcode_modifier & FWait) - if (! add_prefix (FWAIT_OPCODE)) - return; - if (found_reverse_match) { i.tm.operand_types[0] = t->operand_types[1]; i.tm.operand_types[1] = t->operand_types[0]; } + if (i.tm.opcode_modifier & FWait) + if (! add_prefix (FWAIT_OPCODE)) + return; + /* Check string instruction segment overrides */ if ((i.tm.opcode_modifier & IsString) != 0 && i.mem_operands != 0) { - int mem_op = (i.types[0] & Mem) ? 0 : 1; + int mem_op = (i.types[0] & AnyMem) ? 0 : 1; if ((i.tm.operand_types[mem_op] & EsSeg) != 0) { - if (i.seg[0] != (seg_entry *) 0 && i.seg[0] != (seg_entry *) &es) + if (i.seg[0] != NULL && i.seg[0] != &es) { as_bad (_("`%s' operand %d must use `%%es' segment"), i.tm.name, @@ -1247,7 +1265,7 @@ md_assemble (line) } else if ((i.tm.operand_types[mem_op + 1] & EsSeg) != 0) { - if (i.seg[1] != (seg_entry *) 0 && i.seg[1] != (seg_entry *) &es) + if (i.seg[1] != NULL && i.seg[1] != &es) { as_bad (_("`%s' operand %d must use `%%es' segment"), i.tm.name, @@ -1257,69 +1275,130 @@ md_assemble (line) } } - /* If the matched instruction specifies an explicit opcode suffix, - use it - and make sure none has already been specified. */ + /* If matched instruction specifies an explicit opcode suffix, use + it. */ if (i.tm.opcode_modifier & (Data16|Data32)) { - if (i.suffix) - { - as_bad (_("extraneous opcode suffix given")); - return; - } if (i.tm.opcode_modifier & Data16) i.suffix = WORD_OPCODE_SUFFIX; else i.suffix = DWORD_OPCODE_SUFFIX; } - - /* If there's no opcode suffix we try to invent one based on register - operands. */ - if (!i.suffix && i.reg_operands) + else if (i.reg_operands) { - /* We take i.suffix from the LAST register operand specified. This - assumes that the last register operands is the destination register - operand. */ - int op; - for (op = 0; op < MAX_OPERANDS; op++) - if (i.types[op] & Reg) - { - i.suffix = ((i.types[op] & Reg8) ? BYTE_OPCODE_SUFFIX : - (i.types[op] & Reg16) ? WORD_OPCODE_SUFFIX : - DWORD_OPCODE_SUFFIX); - } - } - else if (i.suffix != 0 - && i.reg_operands != 0 - && (i.types[i.operands - 1] & Reg) != 0) - { - int bad; - - /* If the last operand is a register, make sure it is - compatible with the suffix. */ - - bad = 0; - switch (i.suffix) + /* If there's no opcode suffix we try to invent one based on + register operands. */ + if (!i.suffix) { - default: - abort (); - case BYTE_OPCODE_SUFFIX: - /* If this is an eight bit register, it's OK. If it's the - 16 or 32 bit version of an eight bit register, we will - just use the low portion, and that's OK too. */ - if ((i.types[i.operands - 1] & Reg8) == 0 - && i.regs[i.operands - 1]->reg_num >= 4) - bad = 1; - break; - case WORD_OPCODE_SUFFIX: - case DWORD_OPCODE_SUFFIX: - /* We don't insist on the presence or absence of the e - prefix on the register, but we reject eight bit - registers. */ - if ((i.types[i.operands - 1] & Reg8) != 0) - bad = 1; + /* We take i.suffix from the last register operand specified, + Destination register type is more significant than source + register type. */ + int op; + for (op = i.operands; --op >= 0; ) + if (i.types[op] & Reg) + { + i.suffix = ((i.types[op] & Reg8) ? BYTE_OPCODE_SUFFIX : + (i.types[op] & Reg16) ? WORD_OPCODE_SUFFIX : + DWORD_OPCODE_SUFFIX); + break; + } + } + else if (i.suffix == BYTE_OPCODE_SUFFIX) + { + int op; + for (op = i.operands; --op >= 0; ) + { + /* If this is an eight bit register, it's OK. If it's + the 16 or 32 bit version of an eight bit register, + we will just use the low portion, and that's OK too. */ + if (i.types[op] & Reg8) + continue; + if ((i.types[op] & WordReg) && i.regs[op]->reg_num < 4 +#if 0 + /* Check that the template allows eight bit regs + This kills insns such as `orb $1,%edx', which + maybe should be allowed. */ + && (i.tm.operand_types[op] & (Reg8|InOutPortReg)) +#endif + ) + { +#if REGISTER_WARNINGS + if ((i.tm.operand_types[op] & InOutPortReg) == 0) + as_warn (_("using `%%%s' instead of `%%%s' due to `%c' suffix"), + (i.regs[op] - (i.types[op] & Reg16 ? 8 : 16))->reg_name, + i.regs[op]->reg_name, + i.suffix); +#endif + continue; + } + /* Any other register is bad */ + if (i.types[op] & (Reg | RegMMX | Control | Debug | Test + | FloatReg | FloatAcc | SReg2 | SReg3)) + { + as_bad (_("`%%%s' not allowed with `%s%c'"), + i.regs[op]->reg_name, + i.tm.name, + i.suffix); + return; + } + } } - if (bad) - as_bad (_("register does not match opcode suffix")); + else if (i.suffix == DWORD_OPCODE_SUFFIX) + { + int op; + for (op = i.operands; --op >= 0; ) + /* Reject eight bit registers, except where the template + requires them. (eg. movzb) */ + if ((i.types[op] & Reg8) != 0 + && (i.tm.operand_types[op] & (Reg16|Reg32|Acc)) != 0) + { + as_bad (_("`%%%s' not allowed with `%s%c'"), + i.regs[op]->reg_name, + i.tm.name, + i.suffix); + return; + } +#if REGISTER_WARNINGS + /* Warn if the e prefix on a general reg is missing. */ + else if ((i.types[op] & Reg16) != 0 + && (i.tm.operand_types[op] & (Reg32|Acc)) != 0) + { + as_warn (_("using `%%%s' instead of `%%%s' due to `%c' suffix"), + (i.regs[op] + 8)->reg_name, + i.regs[op]->reg_name, + i.suffix); + } +#endif + } + else if (i.suffix == WORD_OPCODE_SUFFIX) + { + int op; + for (op = i.operands; --op >= 0; ) + /* Reject eight bit registers, except where the template + requires them. (eg. movzb) */ + if ((i.types[op] & Reg8) != 0 + && (i.tm.operand_types[op] & (Reg16|Reg32|Acc)) != 0) + { + as_bad (_("`%%%s' not allowed with `%s%c'"), + i.regs[op]->reg_name, + i.tm.name, + i.suffix); + return; + } +#if REGISTER_WARNINGS + /* Warn if the e prefix on a general reg is present. */ + else if ((i.types[op] & Reg32) != 0 + && (i.tm.operand_types[op] & (Reg16|Acc)) != 0) + { + as_warn (_("using `%%%s' instead of `%%%s' due to `%c' suffix"), + (i.regs[op] - 8)->reg_name, + i.regs[op]->reg_name, + i.suffix); + } +#endif + } + else + abort(); } /* Make still unresolved immediate matches conform to size of immediate @@ -1377,18 +1456,32 @@ md_assemble (line) { /* Select between byte and word/dword operations. */ if (i.tm.opcode_modifier & W) - i.tm.base_opcode |= W; + { + if (i.tm.opcode_modifier & ShortForm) + i.tm.base_opcode |= 8; + else + i.tm.base_opcode |= 1; + } /* Now select between word & dword operations via the operand - size prefix. */ - if ((i.suffix == WORD_OPCODE_SUFFIX) ^ flag_16bit_code) + size prefix, except for instructions that will ignore this + prefix anyway. */ + if ((i.suffix == DWORD_OPCODE_SUFFIX + || i.suffix == LONG_OPCODE_SUFFIX) == flag_16bit_code + && !(i.tm.opcode_modifier & IgnoreDataSize)) { - unsigned char prefix = WORD_PREFIX_OPCODE; + unsigned int prefix = DATA_PREFIX_OPCODE; if (i.tm.opcode_modifier & JumpByte) /* jcxz, loop */ prefix = ADDR_PREFIX_OPCODE; if (! add_prefix (prefix)) return; } + /* Size floating point instruction. */ + if (i.suffix == LONG_OPCODE_SUFFIX) + { + if (i.tm.opcode_modifier & FloatMF) + i.tm.base_opcode ^= 4; + } } /* For insns with operands there are more diddles to do to the opcode. */ @@ -1427,14 +1520,24 @@ md_assemble (line) unsigned int op = (i.types[0] & (Reg | FloatReg)) ? 0 : 1; /* Register goes in low 3 bits of opcode. */ i.tm.base_opcode |= i.regs[op]->reg_num; - } - else if (i.tm.opcode_modifier & ShortFormW) - { - /* Short form with 0x8 width bit. Register is always dest. operand */ - i.tm.base_opcode |= i.regs[1]->reg_num; - if (i.suffix == WORD_OPCODE_SUFFIX || - i.suffix == DWORD_OPCODE_SUFFIX) - i.tm.base_opcode |= 0x8; + if ((i.tm.opcode_modifier & Ugh) != 0) + { + /* Warn about some common errors, but press on regardless. + The first case can be generated by gcc (<= 2.8.1). */ + if (i.operands == 2) + { + /* reversed arguments on faddp, fsubp, etc. */ + as_warn (_("translating to `%s %%%s,%%%s'"), i.tm.name, + i.regs[1]->reg_name, + i.regs[0]->reg_name); + } + else + { + /* extraneous `l' suffix on fp insn */ + as_warn (_("translating to `%s %%%s'"), i.tm.name, + i.regs[0]->reg_name); + } + } } else if (i.tm.opcode_modifier & Modrm) { @@ -1468,7 +1571,7 @@ md_assemble (line) were given in the reverse order. */ if (i.tm.opcode_modifier & ReverseRegRegmem) { - reg_entry *tmp = i.regs[source]; + const reg_entry *tmp = i.regs[source]; i.regs[source] = i.regs[dest]; i.regs[dest] = tmp; } @@ -1495,9 +1598,9 @@ md_assemble (line) if (i.mem_operands) { unsigned int fake_zero_displacement = 0; - unsigned int op = ((i.types[0] & Mem) + unsigned int op = ((i.types[0] & AnyMem) ? 0 - : (i.types[1] & Mem) ? 1 : 2); + : (i.types[1] & AnyMem) ? 1 : 2); default_seg = &ds; @@ -1617,25 +1720,16 @@ md_assemble (line) if (i.rm.mode != 3) uses_mem_addrmode = 1; } - else if (i.tm.opcode_modifier & Seg2ShortForm) + else if (i.tm.opcode_modifier & (Seg2ShortForm | Seg3ShortForm)) { if (i.tm.base_opcode == POP_SEG_SHORT && i.regs[0]->reg_num == 1) { - as_bad (_("you can't `pop %%cs' on the 386.")); + as_bad (_("you can't `pop %%cs'")); return; } i.tm.base_opcode |= (i.regs[0]->reg_num << 3); } - else if (i.tm.opcode_modifier & Seg3ShortForm) - { - /* 'push %fs' is 0x0fa0; 'pop %fs' is 0x0fa1. - 'push %gs' is 0x0fa8; 'pop %fs' is 0x0fa9. - So, only if i.regs[0]->reg_num == 5 (%gs) do we need - to change the opcode. */ - if (i.regs[0]->reg_num == 5) - i.tm.base_opcode |= 0x08; - } - else if ((i.tm.base_opcode & ~DW) == MOV_AX_DISP32) + else if ((i.tm.base_opcode & ~(D|W)) == MOV_AX_DISP32) { /* This is a special non-modrm instruction that addresses memory with a 32-bit displacement mode anyway, @@ -1671,6 +1765,11 @@ md_assemble (line) return; } } + else if ((i.tm.opcode_modifier & Ugh) != 0) + { + /* UnixWare fsub no args is alias for fsubp, fadd -> faddp, etc */ + as_warn (_("translating to `%sp'"), i.tm.name); + } } /* Handle conversion of 'int $3' --> special int3 insn. */ @@ -1738,7 +1837,7 @@ md_assemble (line) { if (flag_16bit_code) { - FRAG_APPEND_1_CHAR (WORD_PREFIX_OPCODE); + FRAG_APPEND_1_CHAR (DATA_PREFIX_OPCODE); insn_size += 1; } @@ -1763,24 +1862,23 @@ md_assemble (line) { int size = (i.tm.opcode_modifier & JumpByte) ? 1 : 4; unsigned long n = i.disps[0]->X_add_number; - unsigned char *q; if (size == 1) /* then this is a loop or jecxz type instruction */ { if (i.prefix[ADDR_PREFIX]) { FRAG_APPEND_1_CHAR (ADDR_PREFIX_OPCODE); - i.prefixes -= 1; insn_size += 1; + i.prefixes -= 1; } } if (i.prefixes != 0) as_warn (_("skipping prefixes on this instruction")); - if ((size == 4) && (flag_16bit_code)) + if (size == 4 && flag_16bit_code) { - FRAG_APPEND_1_CHAR (WORD_PREFIX_OPCODE); + FRAG_APPEND_1_CHAR (DATA_PREFIX_OPCODE); insn_size += 1; } @@ -1805,8 +1903,8 @@ md_assemble (line) md_number_to_chars (p, (valueT) n, size); if (size == 1 && !fits_in_signed_byte (n)) { - as_bad (_("loop/jecx only takes byte displacement; %lu shortened to %d"), - n, *p); + as_bad (_("`%s' only takes byte displacement; %lu shortened to %d"), + i.tm.name, n, *p); } } else @@ -1823,7 +1921,7 @@ md_assemble (line) if (flag_16bit_code) { - FRAG_APPEND_1_CHAR (WORD_PREFIX_OPCODE); + FRAG_APPEND_1_CHAR (DATA_PREFIX_OPCODE); insn_size += 1; } @@ -1900,8 +1998,9 @@ md_assemble (line) | i.rm.reg << 3 | i.rm.mode << 6), 1); - /* If i.rm.regmem == ESP (4) && i.rm.mode != Mode 3 (Register mode) - ==> need second modrm byte. */ + /* If i.rm.regmem == ESP (4) + && i.rm.mode != (Register mode) + ==> need second modrm byte. */ if (i.rm.regmem == ESCAPE_TO_TWO_BYTE_ADDRESSING && i.rm.mode != 3) { @@ -1925,7 +2024,7 @@ md_assemble (line) { if (i.disps[n]->X_op == O_constant) { - if (i.types[n] & (Disp8 | Abs8)) + if (i.types[n] & Disp8) { p = frag_more (1); insn_size += 1; @@ -1933,7 +2032,7 @@ md_assemble (line) (valueT) i.disps[n]->X_add_number, 1); } - else if (i.types[n] & (Disp16 | Abs16)) + else if (i.types[n] & Disp16) { p = frag_more (2); insn_size += 2; @@ -1942,7 +2041,7 @@ md_assemble (line) 2); } else - { /* Disp32|Abs32 */ + { /* Disp32 */ p = frag_more (4); insn_size += 4; md_number_to_chars (p, @@ -2223,21 +2322,6 @@ i386_operand (operand_string) return 0; } - /* Determine type of memory operand from opcode_suffix; - no opcode suffix implies general memory references. */ - switch (i.suffix) - { - case BYTE_OPCODE_SUFFIX: - i.types[this_operand] |= Mem8; - break; - case WORD_OPCODE_SUFFIX: - i.types[this_operand] |= Mem16; - break; - case DWORD_OPCODE_SUFFIX: - default: - i.types[this_operand] |= Mem32; - } - /* Check for base index form. We detect the base index form by looking for an ')' at the end of the operand, searching for the '(' matching it, and finding a REGISTER_PREFIX or ',' @@ -2483,13 +2567,14 @@ i386_operand (operand_string) input_line_pointer); RESTORE_END_STRING (displacement_string_end); input_line_pointer = save_input_line_pointer; -#if 0 /* this is handled in expr */ + +#if 0 /* this is handled in expr. */ if (exp->X_op == O_absent) { /* missing expr becomes absolute 0 */ as_bad (_("missing or invalid displacement `%s' taken as 0"), operand_string); - i.types[this_operand] |= (Disp | Abs); + i.types[this_operand] |= Disp; exp->X_op = O_constant; exp->X_add_number = 0; exp->X_add_symbol = (symbolS *) 0; @@ -2519,24 +2604,25 @@ i386_operand (operand_string) } /* Special case for (%dx) while doing input/output op. */ - if (i.base_reg && - i.base_reg->reg_type == (Reg16 | InOutPortReg) && - i.index_reg == 0 && - i.log2_scale_factor == 0 && - i.seg[i.mem_operands] == 0) + if (i.base_reg + && i.base_reg->reg_type == (Reg16 | InOutPortReg) + && i.index_reg == 0 + && i.log2_scale_factor == 0 + && i.seg[i.mem_operands] == 0 + && (i.types[this_operand] & Disp) == 0) { i.types[this_operand] = InOutPortReg; return 1; } - /* Make sure the memory operand we've been dealt is valid. */ - if ((i.base_reg && (i.base_reg->reg_type & BaseIndex) == 0) - || (i.index_reg && ((i.index_reg->reg_type & BaseIndex) == 0 - || i.index_reg->reg_num == ESP_REG_NUM)) - || (i.base_reg && i.index_reg - && (i.base_reg->reg_type & i.index_reg->reg_type & Reg) == 0)) + /* Make sure the memory operand we've been dealt is valid. */ + if ((i.base_reg + && (i.base_reg->reg_type & Reg32) == 0) + || (i.index_reg + && ((i.index_reg->reg_type & (Reg32|BaseIndex)) + != (Reg32|BaseIndex)))) { - as_bad (_("`%s' is not a valid base/index expression"), - operand_string); + as_bad (_("`%s' is not a valid %s bit base/index expression"), + operand_string, "32"); return 0; } i.mem_operands++; @@ -2574,8 +2660,8 @@ md_estimate_size_before_relax (fragP, segment) old_fr_fix = fragP->fr_fix; opcode = (unsigned char *) fragP->fr_opcode; - /* We've already got fragP->fr_subtype right; all we have to do is check - for un-relaxable symbols. */ + /* We've already got fragP->fr_subtype right; all we have to do is + check for un-relaxable symbols. */ if (S_GET_SEGMENT (fragP->fr_symbol) != segment) { /* symbol is undefined in this segment */ @@ -2585,7 +2671,7 @@ md_estimate_size_before_relax (fragP, segment) opcode[0] = 0xe9; /* dword disp jmp */ fragP->fr_fix += 4; fix_new (fragP, old_fr_fix, 4, - fragP->fr_symbol, + fragP->fr_symbol, fragP->fr_offset, 1, (GOT_symbol && /* Not quite right - we should switch on presence of @PLT, but I cannot see how @@ -2677,14 +2763,14 @@ md_convert_frag (abfd, sec, fragP) case ENCODE_RELAX_STATE (COND_JUMP, WORD): opcode[1] = TWO_BYTE_OPCODE_ESCAPE; opcode[2] = opcode[0] + 0x10; - opcode[0] = WORD_PREFIX_OPCODE; + opcode[0] = DATA_PREFIX_OPCODE; extension = 4; /* 3 opcode + 2 displacement */ where_to_put_displacement = &opcode[3]; break; case ENCODE_RELAX_STATE (UNCOND_JUMP, WORD): opcode[1] = 0xe9; - opcode[0] = WORD_PREFIX_OPCODE; + opcode[0] = DATA_PREFIX_OPCODE; extension = 3; /* 2 opcode + 2 displacement */ where_to_put_displacement = &opcode[2]; break; @@ -3153,7 +3239,7 @@ tc_gen_reloc (section, fixp) arelent *rel; bfd_reloc_code_real_type code; - switch(fixp->fx_r_type) + switch (fixp->fx_r_type) { case BFD_RELOC_386_PLT32: case BFD_RELOC_386_GOT32: @@ -3177,7 +3263,10 @@ tc_gen_reloc (section, fixp) fixp->fx_size); else as_bad (_("Can not do %d byte relocation"), fixp->fx_size); + code = BFD_RELOC_32; + break; } + break; } #undef MAP #undef F diff --git a/gas/config/tc-i386.h b/gas/config/tc-i386.h index 1c09dbc4e27..34c8bb7e645 100644 --- a/gas/config/tc-i386.h +++ b/gas/config/tc-i386.h @@ -195,10 +195,12 @@ extern int tc_coff_sizemachdep PARAMS ((fragS *frag)); /* index_base_byte.base for no base register addressing */ #define NO_BASE_REGISTER EBP_REG_NUM -/* these are the att as opcode suffixes, making movl --> mov, for example */ +/* these are the opcode suffixes, making movl --> mov, for example */ #define DWORD_OPCODE_SUFFIX 'l' #define WORD_OPCODE_SUFFIX 'w' #define BYTE_OPCODE_SUFFIX 'b' +#define SHORT_OPCODE_SUFFIX 's' +#define LONG_OPCODE_SUFFIX 'l' /* modrm.mode = REGMEM_FIELD_HAS_REG when a register is in there */ #define REGMEM_FIELD_HAS_REG 0x3/* always = 0x3 */ @@ -235,44 +237,41 @@ extern int tc_coff_sizemachdep PARAMS ((fragS *frag)); #define Disp8 0x200 /* 8 bit displacement */ #define Disp16 0x400 /* 16 bit displacement */ #define Disp32 0x800 /* 32 bit displacement */ -/* Mem8,16,32 are used to limit the allowed sizes of memory operands */ -#define Mem8 0x1000 -#define Mem16 0x2000 -#define Mem32 0x4000 /* specials */ -#define InOutPortReg 0x10000 /* register to hold in/out port addr = dx */ -#define ShiftCount 0x20000 /* register to hold shift cound = cl */ -#define Control 0x40000 /* Control register */ -#define Debug 0x80000 /* Debug register */ -#define Test 0x100000 /* Test register */ -#define FloatReg 0x200000 /* Float register */ -#define FloatAcc 0x400000 /* Float stack top %st(0) */ -#define SReg2 0x800000 /* 2 bit segment register */ -#define SReg3 0x1000000 /* 3 bit segment register */ -#define Acc 0x2000000 /* Accumulator %al or %ax or %eax */ -#define JumpAbsolute 0x4000000 -#define Abs8 0x8000000 -#define Abs16 0x10000000 -#define Abs32 0x20000000 -#define RegMMX 0x40000000 /* MMX register */ -#define EsSeg 0x80000000 /* String insn operand with fixed es segment */ +#define InOutPortReg 0x1000 /* register to hold in/out port addr = dx */ +#define ShiftCount 0x2000 /* register to hold shift cound = cl */ +#define Control 0x4000 /* Control register */ +#define Debug 0x8000 /* Debug register */ +#define Test 0x10000 /* Test register */ +#define FloatReg 0x20000 /* Float register */ +#define FloatAcc 0x40000 /* Float stack top %st(0) */ +#define SReg2 0x80000 /* 2 bit segment register */ +#define SReg3 0x100000 /* 3 bit segment register */ +#define Acc 0x200000 /* Accumulator %al or %ax or %eax */ +#define JumpAbsolute 0x400000 +#define RegMMX 0x800000 /* MMX register */ +#define EsSeg 0x1000000 /* String insn operand with fixed es segment */ #define Reg (Reg8|Reg16|Reg32) /* gen'l register */ #define WordReg (Reg16|Reg32) +#define ImplicitRegister (InOutPortReg|ShiftCount|Acc|FloatAcc) #define Imm (Imm8|Imm8S|Imm16|Imm32) /* gen'l immediate */ #define Disp (Disp8|Disp16|Disp32) /* General displacement */ -#define Mem (Mem8|Mem16|Mem32|Disp|BaseIndex) /* General memory */ -#define WordMem (Mem16|Mem32|Disp|BaseIndex) -#define ByteMem (Mem8|Disp|BaseIndex) -#define ImplicitRegister (InOutPortReg|ShiftCount|Acc|FloatAcc) -#define Abs (Abs8|Abs16|Abs32) - -#define Byte (Reg8|Imm8|Imm8S) -#define Word (Reg16|Imm16) -#define DWord (Reg32|Imm32) +#define AnyMem (Disp|BaseIndex) /* General memory */ +/* The following aliases are defined because the opcode table + carefully specifies the allowed memory types for each instruction. + At the moment we can only tell a memory reference size by the + instruction suffix, so there's not much point in defining Mem8, + Mem16, Mem32 and Mem64 opcode modifiers - We might as well just use + the suffix directly to check memory operands. */ +#define LLongMem AnyMem /* 64 bits (or more) */ +#define LongMem AnyMem /* 32 bit memory ref */ +#define ShortMem AnyMem /* 16 bit memory ref */ +#define WordMem AnyMem /* 16 or 32 bit memory ref */ +#define ByteMem AnyMem /* 8 bit memory ref */ #define SMALLEST_DISP_TYPE(num) \ - fits_in_signed_byte(num) ? (Disp8|Disp32|Abs8|Abs32) : (Disp32|Abs32) + (fits_in_signed_byte(num) ? (Disp8|Disp32) : Disp32) typedef struct { @@ -282,7 +281,8 @@ typedef struct /* how many operands */ unsigned int operands; - /* base_opcode is the fundamental opcode byte with a optional prefix(es). */ + /* base_opcode is the fundamental opcode byte without optional + prefix(es). */ unsigned int base_opcode; /* extension_opcode is the 3 bit extension for group insns. @@ -297,33 +297,32 @@ typedef struct /* opcode_modifier bits: */ #define W 0x1 /* set if operands can be words or dwords - encoded the canonical way: MUST BE 0x1 */ + encoded the canonical way */ #define D 0x2 /* D = 0 if Reg --> Regmem; D = 1 if Regmem --> Reg: MUST BE 0x2 */ #define Modrm 0x4 -#define ReverseRegRegmem 0x8 +#define ReverseRegRegmem 0x8 /* swap reg,regmem fields for 2 reg case */ +#define FloatR 0x8 /* src/dest swap for floats: MUST BE 0x8 */ #define ShortForm 0x10 /* register is in low 3 bits of opcode */ -#define ShortFormW 0x20 /* ShortForm and W bit is 0x8 */ -#define Seg2ShortForm 0x40 /* encoding of load segment reg insns */ -#define Seg3ShortForm 0x80 /* fs/gs segment register insns. */ -#define Jump 0x100 /* special case for jump insns. */ +#define FloatMF 0x20 /* FP insn memory format bit, sized by 0x4 */ +#define Jump 0x40 /* special case for jump insns. */ +#define JumpDword 0x80 /* call and jump */ +#define JumpByte 0x100 /* loop and jecxz */ #define JumpInterSegment 0x200 /* special case for intersegment leaps/calls */ #define FloatD 0x400 /* direction for float insns: MUST BE 0x400 */ -#define JumpByte 0x800 -#define JumpDword 0x1000 -#define FWait 0x2000 /* instruction needs FWAIT */ -#define Data16 0x4000 /* needs data prefix if in 32-bit mode */ -#define Data32 0x8000 /* needs data prefix if in 16-bit mode */ -#define IsString 0x100000 /* quick test for string instructions */ -#define regKludge 0x200000 /* fake an extra reg operand for clr, imul */ - -#define DW (D|W) /* shorthand */ - - /* (opcode_modifier & COMES_IN_BOTH_DIRECTIONS) indicates that the - source and destination operands can be reversed by setting either - the D (for integer insns) or the FloatD (for floating insns) bit - in base_opcode. */ -#define COMES_IN_BOTH_DIRECTIONS (D|FloatD) +#define Seg2ShortForm 0x800 /* encoding of load segment reg insns */ +#define Seg3ShortForm 0x1000 /* fs/gs segment register insns. */ +#define Data16 0x2000 /* needs data prefix if in 32-bit mode */ +#define Data32 0x4000 /* needs data prefix if in 16-bit mode */ +#define IgnoreDataSize 0x8000 /* instruction ignores operand size prefix */ +#define No_bSuf 0x10000 /* b suffix on instruction illegal */ +#define No_wSuf 0x20000 /* w suffix on instruction illegal */ +#define No_lSuf 0x40000 /* l suffix on instruction illegal */ +#define No_sSuf 0x80000 /* s suffix on instruction illegal */ +#define FWait 0x100000 /* instruction needs FWAIT */ +#define IsString 0x200000 /* quick test for string instructions */ +#define regKludge 0x400000 /* fake an extra reg operand for clr, imul */ +#define Ugh 0x80000000 /* deprecated fp insn, gets a warning */ /* operand_types[i] describes the type of operand i. This is made by OR'ing together all of the possible type masks. (e.g.