From: Vincent Stehlé Date: Fri, 27 Nov 2020 14:40:24 +0000 (+0100) Subject: configs/arm_foundationv8: bump to Linux 5.9.11 X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=7467105d6c8a734900dfe7860521c03e41c26b49;p=buildroot.git configs/arm_foundationv8: bump to Linux 5.9.11 - Bump to the latest kernel v5.9.11 and require openssl. - Switch to PSCI for bringing up the secondary CPUs. - Switch to GICv3. - Update the instruction in the readme.txt to use the latest FVP v8 Foundation Platform 11.12 build 38, and to start 4 cores in SMP. Signed-off-by: Vincent Stehlé Cc: Masahiro Yamada Signed-off-by: Thomas Petazzoni --- diff --git a/board/arm/foundation-v8/readme.txt b/board/arm/foundation-v8/readme.txt index 1dedf68cba..b5106f015e 100644 --- a/board/arm/foundation-v8/readme.txt +++ b/board/arm/foundation-v8/readme.txt @@ -3,17 +3,18 @@ ARM software simulator of the AArch64 architecture. First, one has to download the AArch64 software simulator from: - https://silver.arm.com/download/download.tm?pv=2663527 + https://silver.arm.com/download/download.tm?pv=4807186 Then, use the arm_foundationv8_defconfig configuration to build your Buildroot system. Finally, boot your system with: - ${LOCATION_OF_FOUNDATIONV8_SIMULATOR}/models/Linux64_GCC-4.7/Foundation_Platform \ + ${LOCATION_OF_FOUNDATIONV8_SIMULATOR}/models/Linux64_GCC-6.4/Foundation_Platform \ --image output/images/linux-system.axf \ --block-device output/images/rootfs.ext2 \ - --network=nat + --network=nat \ + --cores 4 You can get network access from within the simulated environment by requesting an IP address using DHCP (run the command 'udhcpc'). diff --git a/configs/arm_foundationv8_defconfig b/configs/arm_foundationv8_defconfig index ea19f35502..363f288b87 100644 --- a/configs/arm_foundationv8_defconfig +++ b/configs/arm_foundationv8_defconfig @@ -1,15 +1,18 @@ BR2_aarch64=y -# Linux headers same as kernel, a 4.4 series -BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y +# Linux headers same as kernel, a 5.9 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_9=y BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0" BR2_LINUX_KERNEL=y BR2_LINUX_KERNEL_CUSTOM_VERSION=y -BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.3" +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="5.9.11" BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y BR2_LINUX_KERNEL_DTS_SUPPORT=y -BR2_LINUX_KERNEL_INTREE_DTS_NAME="arm/foundation-v8" +BR2_LINUX_KERNEL_INTREE_DTS_NAME="arm/foundation-v8-gicv3-psci" +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y BR2_TARGET_ROOTFS_EXT2=y # BR2_TARGET_ROOTFS_TAR is not set BR2_TARGET_BOOT_WRAPPER_AARCH64=y -BR2_TARGET_BOOT_WRAPPER_AARCH64_DTS="arm/foundation-v8" +BR2_TARGET_BOOT_WRAPPER_AARCH64_DTS="arm/foundation-v8-gicv3-psci" BR2_TARGET_BOOT_WRAPPER_AARCH64_BOOTARGS="root=/dev/vda consolelog=9 console=ttyAMA0 rw" +BR2_TARGET_BOOT_WRAPPER_AARCH64_PSCI=y +BR2_TARGET_BOOT_WRAPPER_AARCH64_GICV3=y