From: Mike Frysinger Date: Sun, 15 Jan 2006 04:12:27 +0000 (-0000) Subject: much simpler version by Thomas Chou X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=774f872234161540a11ed8c1ff5d5b23ccb98a09;p=buildroot.git much simpler version by Thomas Chou --- diff --git a/toolchain/elf2flt/elf2flt.nios2.conditional b/toolchain/elf2flt/elf2flt.nios2.conditional index 42b24b8fa8..8442f93851 100644 --- a/toolchain/elf2flt/elf2flt.nios2.conditional +++ b/toolchain/elf2flt/elf2flt.nios2.conditional @@ -1,335 +1,13 @@ ---- elf2flt/Makefile.in -+++ elf2flt/Makefile.in -@@ -34,6 +34,12 @@ else - SRC_LDFILE= elf2flt.ld - endif - -+ifeq ($(strip $(CPU)),nios2) -+SRC_LDFILE= $(CPU)-elf2flt.ld -+else -+SRC_LDFILE= elf2flt.ld -+endif -+ - target_bindir = $(prefix)/$(TARGET)/bin - target_libdir = $(prefix)/$(TARGET)/lib - ---- elf2flt/elf2flt.c -+++ elf2flt/elf2flt.c -@@ -553,9 +553,11 @@ dump_symbols(symbols, number_of_symbols) - * Only relocate things in the data sections if we are PIC/GOT. - * otherwise do text as well - */ -- if (!pic_with_got && (a->flags & SEC_CODE)) -+// wentao if (!pic_with_got && (a->flags & SEC_CODE)) -+ if (!pic_with_got && (strcmp(".text", a->name) == 0)) - sectionp = text + (a->vma - text_vma); -- else if (a->flags & SEC_DATA) -+// wentao else if (a->flags & SEC_DATA) -+ else if (strcmp(".data", a->name) == 0) - sectionp = data + (a->vma - data_vma); - else - continue; -@@ -926,8 +928,7 @@ dump_symbols(symbols, number_of_symbols) - bad_relocs++; - continue; - } -- /* Absolute symbol done not relocation */ -- relocation_needed = !bfd_is_abs_section(sym_section); -+ relocation_needed = 1; - sym_addr = (*(q->sym_ptr_ptr))->value; - sym_vma = bfd_section_vma(abs_bfd, sym_section); - sym_addr += sym_vma + q->addend; -@@ -1013,19 +1014,10 @@ dump_symbols(symbols, number_of_symbols) - - /* grab any offset from the text */ - offset = (p[0]<<24) + (p[1] << 16) + (p[2] << 8) + (p[3]); -+ //sym_addr = (*(q->sym_ptr_ptr))->value; - sym_vma = bfd_section_vma(abs_bfd, sym_section); -- /* This is a horrible kludge. For some -- reason, *sometimes* the offset is in -- both addend and the code. Detect -- it, and cancel the effect. Otherwise -- the offset gets added twice - ouch. -- There should be a better test -- for this condition, based on the -- BFD data structures */ -- if(offset==q->addend) -- offset=0; -- - sym_addr += offset + sym_vma + q->addend; -+ - relocation_needed = 1; - break; - } -@@ -1848,32 +1840,27 @@ int main(int argc, char *argv[]) - /* Group output sections into text, data, and bss, and calc their sizes. */ - for (s = abs_bfd->sections; s != NULL; s = s->next) { - unsigned long *vma, *len; -- bfd_size_type sec_size; -- bfd_vma sec_vma; - -- if (s->flags & SEC_CODE) { -+ if (strcmp(s->name, ".text") == 0) /*wentao if (s->flags & SEC_CODE)*/ { - vma = &text_vma; - len = &text_len; -- } else if (s->flags & SEC_DATA) { -+ } else if (strcmp(s->name, ".data") == 0) /* wentao (s->flags & SEC_DATA)*/ { - vma = &data_vma; - len = &data_len; -- } else if (s->flags & SEC_ALLOC) { -+ } else if (strcmp(s->name, ".bss") == 0) /*(s->flags & SEC_ALLOC)*/ { - vma = &bss_vma; - len = &bss_len; - } else - continue; - -- sec_size = bfd_section_size(abs_bfd, s); -- sec_vma = bfd_section_vma(abs_bfd, s); -- -- if (sec_vma < *vma) { -+ if (s->vma < *vma) { - if (*len > 0) -- *len += sec_vma - *vma; -+ *len += s->vma - *vma; - else -- *len = sec_size; -- *vma = sec_vma; -- } else if (sec_vma + sec_size > *vma + *len) -- *len = sec_vma + sec_size - *vma; -+ *len = s->_raw_size; -+ *vma = s->vma; -+ } else if (s->vma + s->_raw_size > *vma + *len) -+ *len = s->vma + s->_raw_size - *vma; - } - - if (text_len == 0) { -@@ -1888,10 +1875,10 @@ int main(int argc, char *argv[]) - - /* Read in all text sections. */ - for (s = abs_bfd->sections; s != NULL; s = s->next) -- if (s->flags & SEC_CODE) -+ if (strcmp(s->name, ".text") == 0) /* wentao (s->flags & SEC_CODE) */ - if (!bfd_get_section_contents(abs_bfd, s, - text + (s->vma - text_vma), 0, -- bfd_section_size(abs_bfd, s))) -+ s->_raw_size)) - { - fprintf(stderr, "read error section %s\n", s->name); - exit(2); -@@ -1919,10 +1906,10 @@ int main(int argc, char *argv[]) - - /* Read in all data sections. */ - for (s = abs_bfd->sections; s != NULL; s = s->next) -- if (s->flags & SEC_DATA) -+ if (strcmp(s->name, ".data") == 0) /* wentao (s->flags & SEC_DATA)*/ - if (!bfd_get_section_contents(abs_bfd, s, - data + (s->vma - data_vma), 0, -- bfd_section_size(abs_bfd, s))) -+ s->_raw_size)) - { - fprintf(stderr, "read error section %s\n", s->name); - exit(2); ---- elf2flt/nios2-elf2flt.ld -+++ elf2flt/nios2-elf2flt.ld -@@ -0,0 +1,126 @@ -+ENTRY (_start) -+ -+MEMORY { -+ flatmem : ORIGIN = 0x0, LENGTH = 0xfffffff -+} -+ -+SECTIONS { -+ .text 0 : { -+ /* Avoid address 0; binfmt_flat treats it specially. */ -+ . = . + 4 ; -+ -+ . = ALIGN(0x4) ; -+ _stext = . ; -+ -+ *(.text) -+ *(.text.*) -+ *(.gnu.warning) -+ *(.stub) -+ *(.gnu.linkonce.t*) -+ *(.jcr) -+ *(.init) -+ *(.fini) -+ -+ /* This is special code area at the end of the normal -+ text section. It contains a small lookup table at -+ the start followed by the code pointed to by entries -+ in the lookup table. */ -+ . = ALIGN (4) ; -+ PROVIDE(__ctbp = .); -+ *(.call_table_data) -+ *(.call_table_text) -+ -+ . = ALIGN(0x10) ; -+ _etext = . ; -+ } > flatmem -+ .data : { -+ . = ALIGN(0x4) ; -+ _sdata = . ; -+ __data_start = . ; -+ data_start = . ; -+ *(.rela.got) -+ *(.rel.got) -+ *(.got.plt) -+ *(.got) -+ LONG(-1) -+ *(.rodata) -+ *(.rodata1) -+ *(.rodata.*) -+ *(.gnu.linkonce.r*) -+ *(.data) -+ *(.data.*) -+ *(.gnu.linkonce.d*) -+ *(.data1) -+ *(.eh_frame) -+ *(.gcc_except_table) -+ . = ALIGN(4) ; -+ *(.ctors.*) -+ *(.ctors) -+ LONG(0) -+ *(.dtors.*) -+ *(.dtors) -+ LONG(0) -+ . = ALIGN(0x10) ; -+ -+ _gp = ABSOLUTE(ALIGN(16) + 0x7ff0); -+ PROVIDE(gp = _gp); -+ *(.sdata) -+ *(.sdata.*) -+ *(.sbss) -+ *(.gnu.linkonce.s.*) -+ _edata = . ; -+ } > flatmem -+ .bss : { -+ . = ALIGN(0x4) ; -+ _sbss = ALIGN(0x4) ; -+ __bss_start = . ; -+ *(.dynsbss) -+ *(.sbss) -+ *(.sbss.*) -+ *(.scommon) -+ *(.dynbss) -+ *(.bss) -+ *(.bss.*) -+ *(COMMON) -+ . = ALIGN(0x4) ; -+ _ebss = . ; -+ _end = . ; -+ end = . ; -+ } > flatmem -+ -+ .junk 0 : { *(.rel*) *(.rela*) } -+ /* Stabs debugging sections. */ -+ .stab 0 : { *(.stab) } -+ .stabstr 0 : { *(.stabstr) } -+ .stab.excl 0 : { *(.stab.excl) } -+ .stab.exclstr 0 : { *(.stab.exclstr) } -+ .stab.index 0 : { *(.stab.index) } -+ .stab.indexstr 0 : { *(.stab.indexstr) } -+ .comment 0 : { *(.comment) } -+ /* DWARF debug sections. -+ Symbols in the DWARF debugging sections are relative to the beginning -+ of the section so we begin them at 0. */ -+ /* DWARF 1 */ -+ .debug 0 : { *(.debug) } -+ .line 0 : { *(.line) } -+ /* GNU DWARF 1 extensions */ -+ .debug_srcinfo 0 : { *(.debug_srcinfo) } -+ .debug_sfnames 0 : { *(.debug_sfnames) } -+ /* DWARF 1.1 and DWARF 2 */ -+ .debug_aranges 0 : { *(.debug_aranges) } -+ .debug_pubnames 0 : { *(.debug_pubnames) } -+ /* DWARF 2 */ -+ .debug_info 0 : { *(.debug_info) } -+ .debug_abbrev 0 : { *(.debug_abbrev) } -+ .debug_line 0 : { *(.debug_line) } -+ .debug_frame 0 : { *(.debug_frame) } -+ .debug_str 0 : { *(.debug_str) } -+ .debug_loc 0 : { *(.debug_loc) } -+ .debug_macinfo 0 : { *(.debug_macinfo) } -+ /* SGI/MIPS DWARF 2 extensions */ -+ .debug_weaknames 0 : { *(.debug_weaknames) } -+ .debug_funcnames 0 : { *(.debug_funcnames) } -+ .debug_typenames 0 : { *(.debug_typenames) } -+ .debug_varnames 0 : { *(.debug_varnames) } -+ /* These must appear regardless of . */ -+} ---- elf2flt/ld-elf2flt.in -+++ elf2flt/ld-elf2flt.in -@@ -15,13 +15,9 @@ - LINKER="$0.real" # the original renamed-linker - ELF2FLT="`expr $0 : '\(.*\)ld'`elf2flt" - TOOLDIR="`dirname $0`" # let gcc find the tools for us --LDSCRIPTPATH="${TOOLDIR}/../@target_alias@/lib" # and the scripts - SHARED_ID="" - NEWLDSCRIPT="" - --# check TOOLDIR from prefix/bin/ or prefix/target-alias/bin/ --[ -d "${TOOLDIR}/../@target_alias@/lib" ] || LDSCRIPTPATH="${TOOLDIR}/../lib" -- - # - # if we have the elf2flt options, run it - # -@@ -77,9 +73,6 @@ then - VERBOSE="y" - ;; - -- -m) shift; EMUL="-m $1";; # ld emulations for h8300 -- -m*) EMUL=$1;; -- - *) ARG1="$ARG1 $1" - ;; - esac -@@ -120,37 +113,33 @@ then - fi - - # Provide the magic parameter that defines the library data segment pointer offset -- case "@target_cpu@" in -- h8300) GOT_OFFSET="__current_shared_library_er5_offset_";; -- *) GOT_OFFSET="_current_shared_library_a5_offset_";; -- esac -- ARG1="$ARG1 -defsym $GOT_OFFSET=`expr ${SHARED_ID} '*' -4 - 4`" -+ ARG1="$ARG1 -defsym _current_shared_library_a5_offset_=`expr ${SHARED_ID} '*' -4 - 4`" - fi - - # provide a default linker script, we usually need one -- [ -z "$LDSCRIPT" ] && LDSCRIPT="${LDSCRIPTPATH}/elf2flt.ld" -+ [ -z "$LDSCRIPT" ] && LDSCRIPT="@prefix@/@target_alias@/lib/elf2flt.ld" - - # if we can find the linker script we preprocess it, otherwise - # we assume the user knows what they are doing - if [ -f "$LDSCRIPT" ]; then - sed $SEDOP < "$LDSCRIPT" > "$NEWLDSCRIPT" - LDSCRIPT="$NEWLDSCRIPT" -- elif [ -f "${LDSCRIPTPATH}/$LDSCRIPT" ]; then -- sed $SEDOP < "${LDSCRIPTPATH}/$LDSCRIPT" > "$NEWLDSCRIPT" -+ elif [ -f "@prefix@/@target_alias@/lib/$LDSCRIPT" ]; then -+ sed $SEDOP < "@prefix@/@target_alias@/lib/$LDSCRIPT" > "$NEWLDSCRIPT" - LDSCRIPT="$NEWLDSCRIPT" -- elif [ -f "${LDSCRIPTPATH}/ldscripts/$LDSCRIPT" ]; then -- sed $SEDOP < "${LDSCRIPTPATH}/ldscripts/$LDSCRIPT" > "$NEWLDSCRIPT" -+ elif [ -f "@prefix@/@target_alias@/lib/ldscripts/$LDSCRIPT" ]; then -+ sed $SEDOP < "@prefix@/@target_alias@/lib/ldscripts/$LDSCRIPT" > "$NEWLDSCRIPT" - LDSCRIPT="$NEWLDSCRIPT" - fi - - if [ "@got_check@" = "no" ] - then -- $LINKER $EMUL $SDIRS -T $LDSCRIPT -Ur -d -o "$OFILE.elf" $ARG1 ||exit $? -- $LINKER $EMUL $SDIRS -T $LDSCRIPT -o "$OFILE.gdb" $ARG1 ||exit $? -+ $LINKER $SDIRS -T $LDSCRIPT -Ur -d -o "$OFILE.elf" $ARG1 ||exit $? -+ $LINKER $SDIRS -T $LDSCRIPT -o "$OFILE.gdb" $ARG1 ||exit $? - else -- $LINKER $EMUL -r -d -o "$OFILE.elf2flt" $ARG1 ||exit $? -- $LINKER $EMUL $SDIRS -T $LDSCRIPT -Ur -o "$OFILE.elf" "$OFILE.elf2flt" ||exit $? -- $LINKER $EMUL $SDIRS -T $LDSCRIPT -o "$OFILE.gdb" "$OFILE.elf2flt" ||exit $? -+ $LINKER -r -d -o "$OFILE.elf2flt" $ARG1 ||exit $? -+ $LINKER $SDIRS -T $LDSCRIPT -Ur -o "$OFILE.elf" "$OFILE.elf2flt" ||exit $? -+ $LINKER $SDIRS -T $LDSCRIPT -o "$OFILE.gdb" "$OFILE.elf2flt" ||exit $? - rm -f "$OFILE.elf2flt" - fi - if grep _GLOBAL_OFFSET_TABLE_ "$OFILE.gdb" > /dev/null +--- elf2flt/elf2flt.ld +++ elf2flt/elf2flt.ld +@@ -62,6 +62,10 @@ + *(.eh_frame) + *(.gcc_except_table) + ++ /* nios2 need gp */ ++ _gp = ABSOLUTE(ALIGN(16) + 0x7ff0); ++ PROVIDE(gp = _gp); ++ + /* Microblaze has .sdata and .sbss (small bss). They must + be contiguous, so please don't move any of this. JW */ + _ssrw = . ;