From: Simon Marchi Date: Tue, 5 Apr 2016 17:59:49 +0000 (-0400) Subject: Improve gdb_remote_download, remove gdb_download X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=7817ea46148df2931cf00d17aeedb844b6e4e4db;p=binutils-gdb.git Improve gdb_remote_download, remove gdb_download This patch removes gdb_download in favor of gdb_remote_download, since they are very close in functionality. Also, in preparation for the following patch about shared library handling during tests, it improves gdb_remote_download so that it uses standard_output_file for any destination board that is local, not only host. If the destination board is remote, gdb_remote_download will use the standard remote_download from DejaGnu, resulting in the file being transferred on the remote system. If the destination is local, gdb_remote_download will copy the file to the standard test directory (found using standard_output_file). Tcl's file copy seems to handle gracefully cases where the source file is the same as the destination, so I don't think it's necessary to check for that case ourselves, as a previous version of the patch did. I'd prefer to keep the name gdb_download instead of gdb_remote_download, since I don't like the fact that gdb_remote_download implies that the destination is remote, when it's not always the case. However, gdb_remote_download is used at many more places than gdb_download, so it's easier to reuse that. Also, since it's a wrapper around DejaGnu's remote_download, it might be better to keep that name. I don't know. I ran the testsuite native, with native-gdbserver and with a remote gdbserver, and didn't see any related failure. gdb/testsuite/ChangeLog: * gdb.base/jit-so.exp: Use gdb_remote_download instead of gdb_download. Use it even if the target is not remote. * gdb.base/jit.exp (compile_jit_test): Likewise. * lib/gdb.exp (gdb_remote_download): Copy files to the standard output directory if the destination board is local, otherwise use the standard remote_download from DejaGnu. (gdb_download): Remove. (gdb_load_shlibs): Use gdb_remote_download instead of gdb_download. * lib/gdbserver-support.exp (gdbserver_download_current_prog): Use gdb_remote_download instead of gdb_download. Use it even if the target is not remote. * lib/mi-support.exp (mi_load_shlibs): Use gdb_remote_download instead of gdb_download. --- diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index ec99787cd57..32c20de8218 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,20 @@ +2016-04-05 Simon Marchi + + * gdb.base/jit-so.exp: Use gdb_remote_download instead of + gdb_download. Use it even if the target is not remote. + * gdb.base/jit.exp (compile_jit_test): Likewise. + * lib/gdb.exp (gdb_remote_download): Copy files to the standard + output directory if the destination board is local, otherwise use + the standard remote_download from DejaGnu. + (gdb_download): Remove. + (gdb_load_shlibs): Use gdb_remote_download instead of + gdb_download. + * lib/gdbserver-support.exp (gdbserver_download_current_prog): + Use gdb_remote_download instead of gdb_download. Use it even if + the target is not remote. + * lib/mi-support.exp (mi_load_shlibs): Use gdb_remote_download + instead of gdb_download. + 2016-04-04 Simon Marchi * gdb.mi/mi-breakpoint-changed.exp: Add some with_test_prefix. diff --git a/gdb/testsuite/gdb.base/jit-so.exp b/gdb/testsuite/gdb.base/jit-so.exp index adb21eaa4dc..01354734357 100644 --- a/gdb/testsuite/gdb.base/jit-so.exp +++ b/gdb/testsuite/gdb.base/jit-so.exp @@ -61,11 +61,7 @@ if { [gdb_compile_shlib ${solib_srcfile} ${solib_binfile} {}] != "" } { return -1 } -if {[is_remote target]} { - set solib_binfile_target [gdb_download ${solib_binfile}] -} else { - set solib_binfile_target $solib_binfile -} +set solib_binfile_target [gdb_remote_download target ${solib_binfile}] proc one_jit_test {count match_str} { with_test_prefix "one_jit_test-$count" { diff --git a/gdb/testsuite/gdb.base/jit.exp b/gdb/testsuite/gdb.base/jit.exp index da9449b867a..17024e49516 100644 --- a/gdb/testsuite/gdb.base/jit.exp +++ b/gdb/testsuite/gdb.base/jit.exp @@ -57,11 +57,7 @@ proc compile_jit_test {testname binsuffix options} { return -1 } - if {[is_remote target]} { - set solib_binfile_target [gdb_download ${solib_binfile}] - } else { - set solib_binfile_target $solib_binfile - } + set solib_binfile_target [gdb_remote_download target ${solib_binfile}] return 0 } diff --git a/gdb/testsuite/lib/gdb.exp b/gdb/testsuite/lib/gdb.exp index a77bce4f390..4e5c89b0f87 100644 --- a/gdb/testsuite/lib/gdb.exp +++ b/gdb/testsuite/lib/gdb.exp @@ -4183,34 +4183,42 @@ proc gdb_touch_execfile { binfile } { } } -# Like remote_download but provides a gdb-specific behavior. If DEST -# is "host", and the host is not remote, and TOFILE is not specified, -# then the [file tail] of FROMFILE is passed through -# standard_output_file to compute the destination. +# Like remote_download but provides a gdb-specific behavior. +# +# If the destination board is remote, the local file FROMFILE is transferred as +# usual with remote_download to TOFILE on the remote board. The destination +# filename is added to the CLEANFILES global, so it can be cleaned up at the +# end of the test. +# +# If the destination board is local, the destination path TOFILE is passed +# through standard_output_file, and FROMFILE is copied there. +# +# In both cases, if TOFILE is omitted, it defaults to the [file tail] of +# FROMFILE. proc gdb_remote_download {dest fromfile {tofile {}}} { - if {$dest == "host" && ![is_remote host] && $tofile == ""} { - set tofile [standard_output_file [file tail $fromfile]] + # If TOFILE is not given, default to the same filename as FROMFILE. + if {[string length $tofile] == 0} { + set tofile [file tail $fromfile] } - if { $tofile == "" } { - return [remote_download $dest $fromfile] - } else { - return [remote_download $dest $fromfile $tofile] - } -} + if {[is_remote $dest]} { + # When the DEST is remote, we simply send the file to DEST. + global cleanfiles -# gdb_download -# -# Copy a file to the remote target and return its target filename. -# Schedule the file to be deleted at the end of this test. + set destname [remote_download $dest $fromfile $tofile] + lappend cleanfiles $destname -proc gdb_download { filename } { - global cleanfiles + return $destname + } else { + # When the DEST is local, we copy the file to the test directory + # (where the executable is), except if that's already where it is. + set tofile [standard_output_file $tofile] - set destname [remote_download target $filename] - lappend cleanfiles $destname - return $destname + file copy -force $fromfile $tofile + + return $tofile + } } # gdb_load_shlibs LIB... @@ -4223,7 +4231,7 @@ proc gdb_load_shlibs { args } { } foreach file $args { - gdb_download [shlib_target_file $file] + gdb_remote_download target [shlib_target_file $file] } # Even if the target supplies full paths for shared libraries, diff --git a/gdb/testsuite/lib/gdbserver-support.exp b/gdb/testsuite/lib/gdbserver-support.exp index 60ac3afa773..67a83336f92 100644 --- a/gdb/testsuite/lib/gdbserver-support.exp +++ b/gdb/testsuite/lib/gdbserver-support.exp @@ -176,11 +176,7 @@ proc gdbserver_download_current_prog { } { if { $reuse == 0 } { set gdbserver_host_exec $host_exec set gdbserver_host_mtime [file mtime $host_exec] - if [is_remote target] { - set gdbserver_server_exec [gdb_download $host_exec] - } else { - set gdbserver_server_exec $host_exec - } + set gdbserver_server_exec [gdb_remote_download target $host_exec] } return $gdbserver_server_exec diff --git a/gdb/testsuite/lib/mi-support.exp b/gdb/testsuite/lib/mi-support.exp index 7f9a3f557c1..cf3005d19ab 100644 --- a/gdb/testsuite/lib/mi-support.exp +++ b/gdb/testsuite/lib/mi-support.exp @@ -1960,7 +1960,7 @@ proc mi_load_shlibs { args } { } foreach file $args { - gdb_download [shlib_target_file $file] + gdb_remote_download target [shlib_target_file $file] } # Even if the target supplies full paths for shared libraries,