From: Lionel Landwerlin Date: Fri, 18 Jan 2019 10:47:31 +0000 (+0000) Subject: anv: document cache flushes & invalidations X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=79514cc5fb687be76c5fdade0b3cffdf5bac67ea;p=mesa.git anv: document cache flushes & invalidations A little bit of explanation regarding how vkCmdPipelineBarrier() works. v2: Avoid referring to data port cache when it's actually sampler caches (Jason) Complete explanation for indirect draws (Jason) v3: s/samplers/sampler/ (Jason) s/UBOs/data port/ Add documentation for VK_ACCESS_CONDITIONAL_RENDERING_READ_BIT_EXT (Lionel) Signed-off-by: Lionel Landwerlin Acked-by: Eric Engestrom (v1) Reviewed-by: Jason Ekstrand (v2) --- diff --git a/src/intel/vulkan/anv_private.h b/src/intel/vulkan/anv_private.h index 1384f86d384..87f149a6e43 100644 --- a/src/intel/vulkan/anv_private.h +++ b/src/intel/vulkan/anv_private.h @@ -1825,19 +1825,47 @@ anv_pipe_flush_bits_for_access_flags(VkAccessFlags flags) for_each_bit(b, flags) { switch ((VkAccessFlagBits)(1 << b)) { case VK_ACCESS_SHADER_WRITE_BIT: + /* We're transitioning a buffer that was previously used as write + * destination through the data port. To make its content available + * to future operations, flush the data cache. + */ pipe_bits |= ANV_PIPE_DATA_CACHE_FLUSH_BIT; break; case VK_ACCESS_COLOR_ATTACHMENT_WRITE_BIT: + /* We're transitioning a buffer that was previously used as render + * target. To make its content available to future operations, flush + * the render target cache. + */ pipe_bits |= ANV_PIPE_RENDER_TARGET_CACHE_FLUSH_BIT; break; case VK_ACCESS_DEPTH_STENCIL_ATTACHMENT_WRITE_BIT: + /* We're transitioning a buffer that was previously used as depth + * buffer. To make its content available to future operations, flush + * the depth cache. + */ pipe_bits |= ANV_PIPE_DEPTH_CACHE_FLUSH_BIT; break; case VK_ACCESS_TRANSFER_WRITE_BIT: + /* We're transitioning a buffer that was previously used as a + * transfer write destination. Generic write operations include color + * & depth operations as well as buffer operations like : + * - vkCmdClearColorImage() + * - vkCmdClearDepthStencilImage() + * - vkCmdBlitImage() + * - vkCmdCopy*(), vkCmdUpdate*(), vkCmdFill*() + * + * Most of these operations are implemented using Blorp which writes + * through the render target, so flush that cache to make it visible + * to future operations. And for depth related operations we also + * need to flush the depth cache. + */ pipe_bits |= ANV_PIPE_RENDER_TARGET_CACHE_FLUSH_BIT; pipe_bits |= ANV_PIPE_DEPTH_CACHE_FLUSH_BIT; break; case VK_ACCESS_MEMORY_WRITE_BIT: + /* We're transitioning a buffer for generic write operations. Flush + * all the caches. + */ pipe_bits |= ANV_PIPE_FLUSH_BITS; break; default: @@ -1857,26 +1885,65 @@ anv_pipe_invalidate_bits_for_access_flags(VkAccessFlags flags) for_each_bit(b, flags) { switch ((VkAccessFlagBits)(1 << b)) { case VK_ACCESS_INDIRECT_COMMAND_READ_BIT: + /* Indirect draw commands take a buffer as input that we're going to + * read from the command streamer to load some of the HW registers + * (see genX_cmd_buffer.c:load_indirect_parameters). This requires a + * command streamer stall so that all the cache flushes have + * completed before the command streamer loads from memory. + */ + pipe_bits |= ANV_PIPE_CS_STALL_BIT; + /* Indirect draw commands also set gl_BaseVertex & gl_BaseIndex + * through a vertex buffer, so invalidate that cache. + */ + pipe_bits |= ANV_PIPE_VF_CACHE_INVALIDATE_BIT; + /* For CmdDipatchIndirect, we also load gl_NumWorkGroups through a + * UBO from the buffer, so we need to invalidate constant cache. + */ + pipe_bits |= ANV_PIPE_CONSTANT_CACHE_INVALIDATE_BIT; + break; case VK_ACCESS_INDEX_READ_BIT: case VK_ACCESS_VERTEX_ATTRIBUTE_READ_BIT: + /* We transitioning a buffer to be used for as input for vkCmdDraw* + * commands, so we invalidate the VF cache to make sure there is no + * stale data when we start rendering. + */ pipe_bits |= ANV_PIPE_VF_CACHE_INVALIDATE_BIT; break; case VK_ACCESS_UNIFORM_READ_BIT: + /* We transitioning a buffer to be used as uniform data. Because + * uniform is accessed through the data port & sampler, we need to + * invalidate the texture cache (sampler) & constant cache (data + * port) to avoid stale data. + */ pipe_bits |= ANV_PIPE_CONSTANT_CACHE_INVALIDATE_BIT; pipe_bits |= ANV_PIPE_TEXTURE_CACHE_INVALIDATE_BIT; break; case VK_ACCESS_SHADER_READ_BIT: case VK_ACCESS_INPUT_ATTACHMENT_READ_BIT: case VK_ACCESS_TRANSFER_READ_BIT: + /* Transitioning a buffer to be read through the sampler, so + * invalidate the texture cache, we don't want any stale data. + */ pipe_bits |= ANV_PIPE_TEXTURE_CACHE_INVALIDATE_BIT; break; case VK_ACCESS_MEMORY_READ_BIT: + /* Transitioning a buffer for generic read, invalidate all the + * caches. + */ pipe_bits |= ANV_PIPE_INVALIDATE_BITS; break; case VK_ACCESS_MEMORY_WRITE_BIT: + /* Generic write, make sure all previously written things land in + * memory. + */ pipe_bits |= ANV_PIPE_FLUSH_BITS; break; case VK_ACCESS_CONDITIONAL_RENDERING_READ_BIT_EXT: + /* Transitioning a buffer for conditional rendering. We'll load the + * content of this buffer into HW registers using the command + * streamer, so we need to stall the command streamer to make sure + * any in-flight flush operations have completed. + */ pipe_bits |= ANV_PIPE_CS_STALL_BIT; break; default: