From: Fabio Estevam Date: Wed, 16 May 2018 00:24:11 +0000 (-0300) Subject: imx8mqevk: readme: Put switch configuration for SD card boot X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=7b5c6b2464a3518ee9a49f58ed1e2428da5f6aa6;p=buildroot.git imx8mqevk: readme: Put switch configuration for SD card boot Improve the documentation by adding the configuration of SW801 and SW802 switches for SD card boot. Signed-off-by: Fabio Estevam Signed-off-by: Thomas Petazzoni --- diff --git a/board/freescale/imx8mqevk/readme.txt b/board/freescale/imx8mqevk/readme.txt index d50dd6e203..cb7e1dc202 100644 --- a/board/freescale/imx8mqevk/readme.txt +++ b/board/freescale/imx8mqevk/readme.txt @@ -63,6 +63,9 @@ Boot the i.MX8mq EVK board To boot your newly created system: - insert the SD card in the SD slot of the board; +- Configure the switches as follows: +SW801: ON ON OFF OFF +SW802: ON OFF - put a micro USB cable into the Debug USB Port and connect using a terminal emulator at 115200 bps, 8n1; - power on the board.