From: Fabio Estevam Date: Thu, 2 Jun 2016 22:59:54 +0000 (-0300) Subject: configs: new configuration for NXP i.MX51 EVK X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=7e64abdb8d5d6b551a6f7cfb87e73cc0187099fb;p=buildroot.git configs: new configuration for NXP i.MX51 EVK Add a new configuration for NXP i.MX51 EVK based on U-boot 2016.05 and kernel 4.6.1. U-boot 2016.05 needs the patch c510f2e436008 ("video: ipu_common: fix build error") that is already in mainline to fix an IPU build error. We can remove this patch in the future when we switch to U-boot 2016.07. Signed-off-by: Fabio Estevam Signed-off-by: Thomas Petazzoni --- diff --git a/board/freescale/imx51evk/genimage.cfg b/board/freescale/imx51evk/genimage.cfg new file mode 100644 index 0000000000..a44ed300ba --- /dev/null +++ b/board/freescale/imx51evk/genimage.cfg @@ -0,0 +1,41 @@ +# Minimal SD card image for the Freescale's i.MX51 EVK board +# +# We mimic the .sdcard Freescale's image format for i.MX51: +# * the microSD card must have 1 kB free space at the beginning, +# * U-Boot is dumped as is, +# * a FAT partition at offset 8 MB is containing zImage and dtbs, +# * a single root filesystem partition is required (Ext4 in this case). +# + +image boot.vfat { + vfat { + files = { + "imx51-babbage.dtb", + "zImage" + } + } + size = 16M +} + +image sdcard.img { + hdimage { + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot.imx" + offset = 1024 + } + + partition boot { + partition-type = 0xC + bootable = "true" + image = "boot.vfat" + offset = 8M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/freescale/imx51evk/patches/uboot/0001-video-ipu_common-fix-build-error.patch b/board/freescale/imx51evk/patches/uboot/0001-video-ipu_common-fix-build-error.patch new file mode 100644 index 0000000000..356d0b03af --- /dev/null +++ b/board/freescale/imx51evk/patches/uboot/0001-video-ipu_common-fix-build-error.patch @@ -0,0 +1,47 @@ +From c510f2e436008e55a50b063f2180cb1e63984224 Mon Sep 17 00:00:00 2001 +From: Peng Fan +Date: Thu, 28 Apr 2016 10:07:53 +0800 +Subject: [PATCH] video: ipu_common: fix build error + +Some toolchains fail to build +"clk->rate = (u64)(clk->parent->rate * 16) / div;" +And the cast usage is wrong. + +Use the following code to fix the issue, +" + do_div(parent_rate, div); + clk->rate = parent_rate; +" + +Reported-by: Peter Robinson +Signed-off-by: Peng Fan +Cc: Stefano Babic +Cc: Fabio Estevam +Cc: Tom Rini +Cc: Anatolij Gustschin +Cc: Peter Robinson +Reviewed-by: Tom Rini +Tested-by: Peter Robinson +Signed-off-by: Fabio Estevam +--- + drivers/video/ipu_common.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +diff --git a/drivers/video/ipu_common.c b/drivers/video/ipu_common.c +index 36d4b23..5676a0f 100644 +--- a/drivers/video/ipu_common.c ++++ b/drivers/video/ipu_common.c +@@ -352,7 +352,9 @@ static int ipu_pixel_clk_set_rate(struct clk *clk, unsigned long rate) + */ + __raw_writel((div / 16) << 16, DI_BS_CLKGEN1(clk->id)); + +- clk->rate = (u64)(clk->parent->rate * 16) / div; ++ do_div(parent_rate, div); ++ ++ clk->rate = parent_rate; + + return 0; + } +-- +1.9.1 + diff --git a/board/freescale/imx51evk/post-image.sh b/board/freescale/imx51evk/post-image.sh new file mode 100755 index 0000000000..87573557ca --- /dev/null +++ b/board/freescale/imx51evk/post-image.sh @@ -0,0 +1,16 @@ +#!/usr/bin/env bash + +BOARD_DIR="$(dirname $0)" +GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg" +GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" + +rm -rf "${GENIMAGE_TMP}" + +genimage \ + --rootpath "${TARGET_DIR}" \ + --tmppath "${GENIMAGE_TMP}" \ + --inputpath "${BINARIES_DIR}" \ + --outputpath "${BINARIES_DIR}" \ + --config "${GENIMAGE_CFG}" + +exit $? diff --git a/board/freescale/imx51evk/readme.txt b/board/freescale/imx51evk/readme.txt new file mode 100644 index 0000000000..6639a92085 --- /dev/null +++ b/board/freescale/imx51evk/readme.txt @@ -0,0 +1,54 @@ +************************** +Freescale i.MX51 EVK board +************************** + +This file documents the Buildroot support for the Freescale i.MX51 EVK board. + +Build +===== + +First, configure Buildroot for the i.MX51 EVK board: + + make mx51evk_defconfig + +Build all components: + + make + +You will find in output/images/ the following files: + - imx51-babbage.dtb + - rootfs.ext4 + - rootfs.tar + - sdcard.img + - u-boot.imx + - zImage + +Create a bootable SD card +========================= + +To determine the device associated to the SD card have a look in the +/proc/partitions file: + + cat /proc/partitions + +Buildroot prepares a bootable "sdcard.img" image in the output/images/ +directory, ready to be dumped on a SD card. Launch the following +command as root: + + dd if=output/images/sdcard.img of=/dev/ + +*** WARNING! This will destroy all the card content. Use with care! *** + +For details about the medium image layout, see the definition in +board/freescale/imx51evk/genimage.cfg. + +Boot the i.MX51 EVK board +========================= + +To boot your newly created system: +- insert the SD card in the SD slot of the board; +- put a micro USB cable into the Debug USB Port and connect using a terminal + emulator at 115200 bps, 8n1; +- power on the board. + +Enjoy! diff --git a/configs/mx51evk_defconfig b/configs/mx51evk_defconfig new file mode 100644 index 0000000000..413f966920 --- /dev/null +++ b/configs/mx51evk_defconfig @@ -0,0 +1,37 @@ +# Architecture +BR2_arm=y +BR2_cortex_a8=y + +# Linux headers same as kernel, a 4.6 series +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y + +# System +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" + +# patches +BR2_GLOBAL_PATCH_DIR="board/freescale/imx51evk/patches/" + +# required tools to create the SD card image +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y + +# Filesystem +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/freescale/imx51evk/post-image.sh" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BOARDNAME="mx51evk" +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.05" +BR2_TARGET_UBOOT_FORMAT_IMX=y + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6.1" +BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx51-babbage"