From: Luke Kenneth Casson Leighton <lkcl@lkcl.net>
Date: Wed, 20 Jun 2018 08:35:18 +0000 (+0100)
Subject: clarify
X-Git-Tag: convert-csv-opcode-to-binary~5153
X-Git-Url: https://git.libre-soc.org/?a=commitdiff_plain;h=80e4ef4cee79f64f3a94c4dc287a20b7558ac993;p=libreriscv.git

clarify
---

diff --git a/pinmux/pinmux_chennai_2018.tex b/pinmux/pinmux_chennai_2018.tex
index 6fb16a612..03cff3836 100644
--- a/pinmux/pinmux_chennai_2018.tex
+++ b/pinmux/pinmux_chennai_2018.tex
@@ -42,17 +42,16 @@
    \item Pin: an I/O pad.  May be driven (input) or may drive (output).
    \item FN: term for a single-wire "function", such as UART\_TX,
 	     I2C\_SDA, SDMMC\_D0 etc.  may be an input, output or both
-		 (bi-directional case: two wires are always allocated, one
+		 (bi-directional case: two wires are {\bf always} allocated, one
 		  for input to the function and one for output from the function).
    \item Bus: a group of bi-directional functions (SDMMC D0 to D3)
-         where the direction is ganged and under the Bus's control
+         where the direction is ganged and {\bf under the Bus's control}
    \item Input Priority Muxer: a multiplexer with N selector
 		 wires and N associated inputs.  The lowest (highest?) indexed
 		 "selector" enabled results in its 
 		 input being routed to the output.
-   \item Output Demuxer: a one-to-many "redirector" where a single
-	     input is "routed" to any one output, based
-	     on a selector.
+   \item Output Muxer: a many-to-one "redirector" where any one
+	     output "routed" to the input, based on a selector "address".
   \end{itemize}
 }